Fixes an assertion failure in --enable-debug builds and SEGVs in normal
builds.
I'm not 100% sure I like this model, but it at least seems to be
consistent. Some variation on this scheme will need to be adapted to
the trunk, where usnic_del_procs() is called by the PML instead of
internally in usnic_finalize().
A related bug (but with different mechanics) is #4832.
This commit was SVN r32424.
Per patch from aryzhikh, initialize a copule of fields in the openib ini struct
Hard to understand why this has sat there for so long...
cmr=v1.8.2:reviewer=rhc:subject=initialize a copule of fields in the openib ini struct
This commit was SVN r32417.
The following Trac tickets were found above:
Ticket 4377 --> https://svn.open-mpi.org/trac/ompi/ticket/4377
Previously, the connectivity agent was pretty dumb: it took whatever
pings it got and ACKed them. Then we added an agent check to ensured
that the ping actually came from the source interface that it said it
came from. Now we add another check such that when a ping is received
on interface X that corresponds to usnic module Y, we ensure that the
source interface of the ping is on the all_endpoints list for module Y
(i.e., module Y expects to be able to talk to that peer interface).
This detects cases where peers have come to different conclusions
about which interfaces should be used to communicate (which is bad!).
This usually reflects a network misconfiguration.
Fixes CSCuq05389.
This commit was SVN r32383.
Ensure that incoming "ping" messages came from the IP address that
they think they came from. If they don't, drop them (because it is
probably routing error), which will likely eventually cause the
connectivity checker to timeout, and therefore cause the job to abort.
This commit was SVN r32368.
Update compat.h to only handle compatability between v1.7/v1.8 and
v1.9/2.0 (i.e., the current trunk). Remove what seems to be the last
vestiages of OMPI/ORTE pollution in the now-OPAL-ized usnic BTL.
Currently use a hard-coded constant for the MCW size (i.e.,
MPI_COMM_WORLD size) for some initialization values in the v1.9/2.0
series; still need to figure out something better there.
This commit was SVN r32365.
Adapt to moving down to OPAL: find a PML-registered error callback,
and use that when we don't have a module context and we need to abort.
Failing that, just call exit().
This commit was SVN r32362.
communication library should use to initialize itself.
Ralph will champion this change back with an RFC if there is a realistic
need/use case from the community.
This commit was SVN r32361.
The following SVN revision numbers were found above:
r32355 --> open-mpi/ompi@c903917f47
If --with-usnic is specified and we can't build the usnic BTL, abort.
If --without-usnic is specified, gracefully skip building the usnic
BTL. If neither is specified, do the OMPI-default behavior: try to
configure/build the usnic BTL, and if we can't, skip it.
Fixes CSCuq13889.
This commit was SVN r32349.
The only user of this code was coll/sm. I implemented a basic replacement
for the removed code. This gets the trunk compiling again with
--disable-dlopen.
This commit was SVN r32333.
common/ofacm is only used by the iboffload code in ompi. This code does
not currently work so it is safe to ignore these components until it is
fixed.
This commit was SVN r32331.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
turned out to be a nightmare, as the pointers to the classes are
located in shared libraries memory areas, and are not accesible
after the shared library is unloaded. Thus, OPAL cannot cleanup
the left-over classes from the other shared libraries.
This commit was SVN r32248.
The following SVN revision numbers were found above:
r32236 --> open-mpi/ompi@59017433e1
new automake requires subdirs-object directive, to resolve this:
09:43:37 automake: warning: possible forward-incompatibility.
09:43:37 automake: At least a source file is in a subdirectory, but the 'subdir-objects'
09:43:37 automake: automake option hasn't been enabled. For now, the corresponding output
09:43:37 automake: object file(s) will be placed in the top-level directory. However,
09:43:37 automake: this behaviour will change in future Automake versions: they will
09:43:37 automake: unconditionally cause object files to be placed in the same subdirectory
09:43:37 automake: of the corresponding sources.
09:43:37 automake: You are advised to start using 'subdir-objects' option throughout your
09:43:37 automake: project, to avoid future incompatibilities.
09:43:37 tools/otfmerge/Makefile.common:13: warning: source file '$(OTFMERGESRCDIR)/otfmerge.c' is in a subdirectory,
09:43:37 tools/otfmerge/Makefile.common:13: but option 'subdir-objects' is disabled
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32225.
new flag to ompi_info that allows a user to print all MCA variables of a specific type.
--type version_string
This command will print all MCA variables of type version_string.
This feature was developed by Elena Shipunova and was reviewed by Josh Ladd.
This commit was SVN r32166.
mpirun ... -x env_foo1=val1 -x env_foo2 -x env_foo3=val3 should now be expressed as
mpirun ... -mca mca_base_env_list env_foo1=val1+env_foo2+env_foo3=val3.
The motivation for doing this is so that a list of environment variables may be set via standard MCA mechanisms such as mca parameter files, amca lists, etc.
This feature was developed by Elena Shipunova and was reviewed by Josh Ladd.
This commit was SVN r32163.
After discussion with Nathan, change the ERR_VALUE_OUT_OF_BOUNDS to be
ERR_NOT_FOUND, for two reasons:
1. It's consistent with other uses of ERR_NOT_FOUND in the code.
1. In this case, we could have just looked up a variable that is
basically a "hole" -- e.g., var indexes 0, 1, 2 are valid, and 4,
5, and 5 are valid, but 3 is invalid (e.g., 3 was de-registered --
remember that MPI_T explicitly does not allow re-using indexes).
So returning ERR_OUT_OF_BOUNDS seems weird -- returning
ERR_NOT_FOUND seems a bit more natural.
cmr=v1.8.2:ticket=trac:4587
This commit was SVN r32158.
The following Trac tickets were found above:
Ticket 4587 --> https://svn.open-mpi.org/trac/ompi/ticket/4587
The alps ras and plm components were broken by recent changes in ORTE. This
commit resolves those issues.
Changes:
- Define PMI2_SUCCESS if it isn't defined. This fixes a problem with Cray's
PMI implementation which does not define (for some reason) PMI2_SUCCESS. We
had previously just used PMI_SUCCESS.
- Add missing definition and a typo in pml_alps_module.
- launch_id is no longer available in the orte_node_t structure. Use the
attribute lookup to get the value.
- Do not use an O(n^2) sorting algorithm when putting alps nodes in order. Use
opal_list_sort instead (O(nlogn)).
This commit was SVN r32076.
(a) default binding policy is in effect. In this case, we will emit a
warning and default to not binding unless the user provided the
"oversubscribe" or "overload" modifier to the "bind-to" option.
(b) user-specified binding policy is in effect. In this case, we will
error out unless the user provided the "oversubscribe" or "overload"
modifier to the "bind-to" option as we cannot meet the directive.
Either "bind-to" modifier (oversubscribe or overload) will be accepted for
now - in 1.9, we will deprecate the "overload" term in favor of
"oversubscribe".
Also added the ability to accept a --bind-to modifier without specifying the binding policy itself so a user can specify overload-allowed with the default policy.
Closes trac:4345
cmr=v1.8.2:reviewer=rhc:subject=resolve handling of overload conditions
This commit was SVN r32005.
The following Trac tickets were found above:
Ticket 4345 --> https://svn.open-mpi.org/trac/ompi/ticket/4345
* allow users to specify just a modifier for map-by instead of requiring that they also specify a policy. Thus, we now accept --map-by :pe=3 as indicating that we should use the default mapping policy, but bind 3 cpus/proc.
* if users specify a pe's/proc but no policy, default to --map-by NUMA to ensure we have access to multiple cpus for the request. This won't guarantee we have access to enough to meet the request, but gives us a chance. In addition, we know that binding a proc to multiple cpus will work best if those cpus are all in the same NUMA, so this provides some degree of optimized behavior.
Per a request from Jeff, define "oversubscribe" for binding as a synonym for the "overload" modifier.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31967.
http://www.open-mpi.org/community/lists/devel/2014/05/14822.php
Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root).
This commit was SVN r31916.
during the unpack and during the positioning.
Fixes trac:4610.
This commit was SVN r31904.
The following Trac tickets were found above:
Ticket 4610 --> https://svn.open-mpi.org/trac/ompi/ticket/4610
Two leaks are fixed by this commit:
- opal_dss.lookup_data_type returns an allocated string. Free it.
- opal_ifaddrtokindex was leaking a struct addrinfo. Ensure that is
released before returning.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31777.
Either we need to ensure that all events are deleted (which may prove difficult), or find another way to release the base memory.
This commit was SVN r31775.
The following SVN revision numbers were found above:
r31765 --> open-mpi/ompi@75fb6dbba9
Need to remove the items of the list to avoid an assert in debug builds.
cmr=v1.8.2:ticket=trac:4628
This commit was SVN r31769.
The following SVN revision numbers were found above:
r31764 --> open-mpi/ompi@13fd6ae774
The following Trac tickets were found above:
Ticket 4628 --> https://svn.open-mpi.org/trac/ompi/ticket/4628
This fixes a series of leaks identified by valgrind. Since
opal_event_base_open was creating the event base it follows that
opal_event_base_close should release the event base.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31765.
list
This commit updates the behavior of opal_free_list_t to match the
behavior of ompi_free_list_t. opal_free_list_t constructed items
placed on the free list but never destructed them.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31764.
Bring down 3aa0ed6 from the hwloc v1.7 branch: Stevens says we should
GETFD before we SETFD, so we do
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31683.
top_ompi_srcdir -> OMPI_TOP_SRCDIR
top_ompi_builddir -> OMPI_TOP_BUILDDIR
We also split the srcdir/builddir flags according to their local tree (e.g., OPAL_TOP_SRCDIR), and tied them all together in configure.ac. Renamed ompi_ignore and ompi_unignore to be opal_<foo> as these are agnostic markers.
Only thing left is ompilibdir being treated similar to what we dif for srcdir/builddir. Coming soon.
This commit was SVN r31678.
- This line, and those below, will be ignored--
M opal/mca/event/libevent2021/configure.m4
M opal/mca/hwloc/hwloc172/configure.m4
M configure.ac
M config/opal_setup_libltdl.m4
M config/opal_check_visibility.m4
M config/opal_setup_cc.m4
This commit was SVN r31637.
have any impact on the type signature.
Fixes trac:4597.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31635.
The following Trac tickets were found above:
Ticket 4597 --> https://svn.open-mpi.org/trac/ompi/ticket/4597
Several fixes:
- I was allowing an MPI_T_cvar_handle to be created for an invalid
variable. Fixed this by checking if the variable is valid in
mca_base_var_get.
- Use a better error code when the caller tries to create an unbound
pvar handle for a bound variable.
- Return the verbosity level in MPI_T_cvar_get_info.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31576.
http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
code.
This commit fixes minor errors in the incorrectly-committed r31513
(new fd close-on-exec convenience function).
Refs trac:4550
This commit was SVN r31514.
The following SVN revision numbers were found above:
r31513 --> open-mpi/ompi@e1655ae68d
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
Paul Hargrove pointed out that Stevens tells us that we should
FD_GETFL before FD_SETFL. And so we shall.
Make a new convenience function to do this (opal_fd_set_cloexec()),
just so that we don't have to litter this 2-step process throughout
the code.
Refs trac:4550
This commit was SVN r31513.
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
Make sure that an internal, long-lived hwloc fd is marked as
close-on-exec so that children don't inherit it. This patch is
committed upstream in the hwloc master and v1.9 branches as 7489287
and b654e19, respectively. The patch applied here is the exact same
logic, but the surrounding code changed slightly since the hwloc v1.7
series, so the patch doesn't apply cleanly.
Refs trac:4550
This commit was SVN r31511.
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
completed. As we need to have the right displacement at the beginning
of the next call, we should save the position relative to the beginning
of the buffer and not to the last loop.
This commit was SVN r31387.
Aside from comments, these help files are empty -- so just remove
them. Also remove a few inclusions of show_help.h, since it isn't
used in those source files.
This commit was SVN r31328.
The contents of this file were superceded by mca-help-var.txt.
Indeed, this file was already removed from Makefile.am; it looks like
it was accidentally left in SVN.
This commit was SVN r31327.
Also:
* fix formatting error at top (make the emacs format line begin
with a comment character)
* Remove blank lines between topics and replace them with empty
comment lines (so that the help messages are not displayed with a
trailing blank line)
This commit was SVN r31324.
Also, add missing ORTE_ERROR_LOG in the other case where this error
message is used (i.e., ORTE_ERROR_LOG was used in the one place, so
let's also use it in the other place).
This commit was SVN r31321.
This type of help message is now handled by the MCA var system itself
(via the MCA_BASE_VAR_FLAG_ENVIRONMENT_ONLY flag at var_register
time).
This commit was SVN r31318.
add -mca base_env_list "var1=val1 var2=val2 ..." mca parameter that can be used in mca param files
or with -am app.conf mpirun commandline to set rank env variables with mca mechanism
fixed by Elena, reviewed by Miked
cmr=v1.8.1:reviewer=ompi-rm1.8
This commit was SVN r31302.
Also, since I put some of the macros for these silent/verbose rules up
in the top-level Makefile.man-page-rules file, I renamed it to
Makefile.ompi-rules.
I've had this sitting around for a while; now seems like as good a
time as any to commit it.
This commit was SVN r31271.
The semantics of the variable mpi_yield_when_idle are to call
opal_progress_set_yield_when_idle at MPI_Init. It would be difficult
to modify the old variable to support setting this parameter at
runtime. The fix is to add an additional parameter to opal:
opal_progress_yield_when_idle that directly sets the variable. This
variable is settable anytime and does not affect the semantics of
the old mpi_yield_when_idle variable.
Refs trac:193
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31255.
The following Trac tickets were found above:
Ticket 193 --> https://svn.open-mpi.org/trac/ompi/ticket/193
on some linux distro (sles11sp2) csh fails to parse $LS_COLORS and borks with error:
Unknown colorls variable `mh'.
The workaround is to unset LS_COLORS before calling to csh script
reviewed by Jeff
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31244.
opal-restart.c disables crs module selection by setting
crs_base_do_not_select to true using opal_setenv() before
opal_init(). After opal_init() it enables module selection
by changing the variable back to false using opal_setenv().
This does not work anymore as the variables are only read
from the environment during variable registration.
This changes the second opal_setenv() to mca_base_var_set_value()
This commit was SVN r31108.
an enumerator's mca_base_var_enum_sfv_fn_t can be NULL.
cmr=v1.7.5:ticket=trac:4398:reviewer=ompi-gk1.7
This commit was SVN r31085.
The following Trac tickets were found above:
Ticket 4398 --> https://svn.open-mpi.org/trac/ompi/ticket/4398
In the OPAL_ENABLE_FT_CR code path there used to be a variable
'mca_base_component_distill_checkpoint_ready' which got removed.
The FT code was not compiling and while trying to get it to compile
again the old variable was #ifdef'd out. This re-introduces the
variable with a new name 'opal_base_distill_checkpoint_ready'
and enables the code previously #ifdef'd out.
This removes the last hack introduced to get the FT code to compile
again.
This commit was SVN r30928.
* Include opal_stdint.h so that we have uin32_t
cmr=v1.7.5:ticket=trac:4298
This commit was SVN r30890.
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
1. Changed rng_buff_t --> opal_rng_buff_t
2. All global variables obey the prefix rule
3. Old code has been removed
4. Found a couple of unnecessary includes
Refs trac:4298
This commit was SVN r30807.
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
This adds the code to actually checkpoint a process using CRIU
with the necessary variables to control the behaviour.
Right now only --np 1 is supported and --mca oob tcp.
Following parameters are supported:
* crs_criu_log: name of the log file
* crs_criu_log_level: verbosity level in the log file
* crs_criu_tcp_established: C/R established TCP connections
* crs_criu_shell_job: C/R shell jobs
* crs_criu_ext_unix_sk: allow external unix connections
* crs_criu_leave_running: leave tasks in running state after checkpoint
This commit was SVN r30772.
* Remove redundant/unnecessary uses of $2
* Change a bunch of logic from negative to positive
* Use OPAL_VAR_SCOPE_PUSH/POP to help reduce env var usage
* Only use "" in test statements with strings that require sanitization
* Removed redundant AC_MSG_WARN/ERROR. There's now only one check at
the bottom for whether the component is "good" or not. We'll
AC_MSG_WARN/ERROR in that one location.
Thanks to Jeff Squyres for this patch.
This commit was SVN r30739.
To be able to checkpoint/restart using criu (criu.org) a new
CRS component is added which is based on criu. This first commit
provides the minimal set of functions and configure script options
to enable --with-criu and link against libcriu.so.
No actual checkpoint/restart functionality is yet implemented.
This is only the framework which needs to be filled with the
actual functionality.
This commit was SVN r30666.
Wire the security check into ORTE's OOB handshake, and add a "version" check to ensure that both ends are from the same ORTE version. If not, report the mismatch and refuse the connection
Fixes trac:4171
cmr=v1.7.5:reviewer=jsquyres:subject=Add a security framework for authenticating connections
This commit was SVN r30551.
The following Trac tickets were found above:
Ticket 4171 --> https://svn.open-mpi.org/trac/ompi/ticket/4171
Since Paul is the only one of the team with the required hardware to test it, and he has done so, consider this RM-approved.
cmr=v1.7.5:reviewer=ompi-gk1.7
This commit was SVN r30401.
Thanks to Paul Hargrove for tracking it down.
RM-approved
cmr=v1.7.4:reviewer=ompi-gk1.7
This commit was SVN r30397.
The following SVN revision numbers were found above:
r26226 --> open-mpi/ompi@12781482b9
Refs trac:4117. Please use this commit rather than the patch attached to
the ticket; the patch had a few mistakes in the tweaked wording.
This commit was SVN r30362.
The following SVN revision numbers were found above:
r30298 --> open-mpi/ompi@58479399c3
The following Trac tickets were found above:
Ticket 4117 --> https://svn.open-mpi.org/trac/ompi/ticket/4117
work around buggy NUMA node cpusets (i.e., buggy BIOSs).
Thanks to Jeff Becker for reporting the issue.
Submitted by Brice Goglin, reviewed by Jeff Squyres.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30306.
The original code was passing a union by value, and doing odd things
on Solaris/SPARC (where "odd" rhymes with "SIGBUS"). Replace it with
an exploded switch/case block for all the enum values. Also use the
string literals so that we get compiler checking of the format string
vs. the type of the actual arguments.
cmr=v1.7.4:revier=hjelmn:subject=Fix MCA base var to not pass union by value
This commit was SVN r30276.
variable names for deprecated variables.
Closes trac:3270
cmr=v1.7.4:reviewer=jsquyres
This commit was SVN r30275.
The following Trac tickets were found above:
Ticket 3270 --> https://svn.open-mpi.org/trac/ompi/ticket/3270
* Fix some typos in macro names.
* Add case for OS's that have statfs() but no struct statfs (!).
* Add case for NetBSD with struct statvfs.f_fstypename.
Many thanks to Paul Hargrove who developed the majority of this patch.
Reviewed by Jeff Squyres.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30255.
Change the logic in bind.c to only include <malloc.h> if we don't have posix_memalign.
In http://www.open-mpi.org/community/lists/devel/2014/01/13619.php,
Paul Hargrove found a compiler warning on OpenBSD where <malloc.h>
exists, but is not intended to be used (and doesn't error out, so
AC_CHECK_HEADERS says its ok).
Reviewed by Brice Goglin.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30234.
As noted by Paul Hargrove, the #if's surrounding the use of statfs()
and statvfs() in opal/util/path.c have apparently gotten stale (e.g.,
modern flavors of *BSD OSs no longer define __BSD). Changes:
* Add statfs and statvfs to the AC_CHECK_FUNCS in configure.ac
* Add a sanity check to ensure that we have at least one of statfs()
or statvfs(). Add a similar sanity check in opal/util/path.c, just
as defensive programming.
* Use AC_CHECK_MEMBERS in configure.ac to check for specific struct
statfs/struct statvfs members that we use in opal/util/path.c
* In path.c, add some #includes as listed on the OS man page for
statfs(2) (OS X 10.8.5/Mountain Lion)
* The previous code used statvfs() on Solaris and statfs() everywhere
else. Attempting to replicate this with behavior-based configure
testing led to fairly complicted if/else logic, so the new code
uses whichever of the two are available (i.e., it might actually
use both -- OS X 10.8.5 and RHEL 6.5 have both statfs() and
statvfs()). The rationale here is that we don't really care which
of the two functions report the answer; we'll take the answer
regardless of where it comes from. For example, if one function
returns a failure and the other does not, we'll use the results
from the successful function and ignore the failed one.
This new code seems to work on OS X and Linux. We'll have to see what
happens with MTT and future Paul Hargrove testing...
cmr=v1.7.4:reviewer=ompi-rm1.7:subject=Make statfs/statvfs more robust
This commit was SVN r30198.
configury/Makefile.am changes; this commit renames the internal
installdirs.h framework struct field names to match the configry macro
names:
* pkgdatdir -> ompidatadir
* pkglibdir -> ompilibdir
* pkgincludedir -> ompiincludedir
This commit was SVN r30145.
The following SVN revision numbers were found above:
r30140 --> open-mpi/ompi@8b778903d8
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
Right now the C/R code fails because of a change introduced in
opal/mca/compress/base/compress_base_open.c and
pal/mca/crs/base/crs_base_open.c in 2013 with commit
git 734c724ff76d9bf814f3ab0396bcd9ee6fddcd1b
svn r28239
Update OPAL frameworks to use the MCA framework system.
This commit changed a lot but also the return value of functions from
OPAL_SUCCESS to OPAL_ERR_NOT_AVAILABLE/OPAL_ERR_NOT_AVAILABLE.
This commit lets opal_compress_base_register() and opal_crs_base_open()
always return OPAL_SUCCESS and removes unneeded #includes.
This commit was SVN r30130.
The following SVN revision numbers were found above:
r28239 --> open-mpi/ompi@365cf48db5
r30086: make sure that a super item is constructed properly).
Refs trac:4035
This commit was SVN r30090.
The following SVN revision numbers were found above:
r30086 --> open-mpi/ompi@d1c63f878e
The following Trac tickets were found above:
Ticket 4035 --> https://svn.open-mpi.org/trac/ompi/ticket/4035
Thanks to Tetsuya Mishima for identifying the problem and providing the patch!
cmr=v1.7.4:reviewer=jsquyres:subject=Fix LAMA mapper for PGI compilers
This commit was SVN r30086.
Fix comm_spawn on a single host - with the new default mapping scheme, we were incorrectly computing the number of procs to put on the node.
Refs trac:4003
This commit was SVN r30033.
The following Trac tickets were found above:
Ticket 4003 --> https://svn.open-mpi.org/trac/ompi/ticket/4003
