recent versions of PBS Pro requires libcrypto.so, but libpbs.so
does not (yet) depend on it, so manually add -lcrypto if -lpbs alone fails.
Thanks Petr Hanousek for bringing this to our attention
Refs PBSPro/pbspro#331
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
* This should be enough of a breadcrumb for when we get to fixing the
`INTERFACE` check to be strong enough to kick out gfortran 4.8
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
test for both 32 and 64 bits.
clang only support 32 bits builtin atomics when -m32 is used
Thanks Paul Hargrove for reporting this.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
We accepted a change that enabled CMA on s390 and s390x. This change
had the side-effect that we were no longer using the builtin atomics
for these systems. This is a problem since we do not have ASM for
s390 and s390x. This commit restores the atomics.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
the 'hostname' command might not be available on some platforms
such as Fedora Core 26, so mimick config/libtool.m4 and fallback
to 'uname -n' if needed
Refs. #3680
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Without this change, the directory of `javadoc` command must be
included in the `PATH` environment variable at `make`-time.
Paths of `javac`, `javah`, and `jar` commands are detected in
`configure`. So the path of `javadoc` also should be detected.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The --enable-new-dtags option for the compiler wrappers is
often great, but for some particular install/usage scenarios
causes issues.
This commit provides a new configury option to use of rpath
in the compiler wrappers, but disables the
use of --enable-new-dtags in the link line.
The new configury option is
--enable-wrappers-runpath
To disable use of --enable-new-dtags in the wrappers, add
--disable-wrappers-runpath
to the Open MPI configury line.
Fixes#1089
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Follow the OMPI bias: if a human requests feature X and configure
can't deliver feature X, abort and let the human figure it out.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Make sure the default Autoconf "yes" value for $with_lustre when the
user specifies --with-lustre on the command line (without a value)
does not propagate down into the directory logic.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This PR renames the common library for OFI libfabric from
libfabric to ofi. There are a number of reasons this
is good to do:
1) its shorter and replaces 9 characters with three for
function names for what may eventually be a fairly extensive interface
2) OFI is the term used for MTL and RML components that use
the OFI libfabric interface
3) A planned OSC component will also use the OFI term.
4) Other HPC libraries that can use OFI libfabric tend to use
the term "ofi" internally and also in their configure options
relevant to OFI libfabric (i.e. MPICH/CH4, Intel MPI, Sandia SHMEM)
There seem to be comments in places in the Open MPI source
code that indicate that this common library will be going away.
Far from it as we will want to be able to share things like
AV objects between OMPI and possibly OSHMEM components that
use the OFI libfabric interface.
This PR also adds a synonym to the --with-libfabric(-libdir)
configury options: --with-ofi and with-ofi-libdir.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
since Open MPI now requires a C99, and ptrdiff_t type is part of C99,
there is no more need for the abstract OPAL_PTRDIFF_TYPE type.
Thanks George, Nathan and Paul for the help.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Look for amd64 in addition to x86_64 as the platform
type for x86_64 assembly. The FreeBSD-packaged
Autoconf package has a patch to return
amd64-unknown-freebsd11.0 instead of the
x86_64-unknown-freebsd11.0 that a stock Autoconf
package would return. Since we want to run Jenkins
builds on FreeBSD, working around the FreeBSD patch
is probably the easiest thing.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Remove loadleveler as it is obsolescent and is no longer supported.
Fixes#3167
We'll wait for final check of whether or not loadleveler even
compiles/functions before merging this.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This fixes a mismatch between PS listing that returned
USERNAME but code was pruning based on UID.
This changes the OPAL_PS_FLAVOR_CHECK format to return
'uid' instead of 'user'. (Note: Avoiding call to
getlogin_r() but assuming UID is uniform on system,
same assumption exists for session dir anyway.)
Note, still maintains behavior from man page for root
running orte-clean on node (kills all orteds).
Adds 'orte-dvm' to list of procnames that will be checked/killed.
Signed-off-by: Thomas Naughton <naughtont@ornl.gov>
in this context, AMD64 really means amd64 or em64t, so let's
rename this into X86_64 in order to avoid any confusion
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
there is no need to look for an assembly file when BUILTIN_GCC is used
Fixesopen-mpi/ompi#3032
Refs open-mpi/ompi#3036
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Looks like we missed one place where we needed to swap OMPI_UNIQUE for
OMPI_FLAGS_UNIQUE. Thanks to Phil Tooley (@Telemin) for reporting the
issue.
Fixes#2635.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
--with-libltdl is now added (via AC_ARG_WITH) in
opal/mca/dl/libltdl/configure.m4 -- it no longer belongs up here in
this top-level m4 file. Plus, the help string in this stale entry is
also stale/incorrect.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
perl is required by ompi/mpi/man/make_manpage.pl, that is even used in opal.
so simply aborts at configure time if perl is not available
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
PR open-mpi/ompi#2432 introduced a regression where configure
and build with --disable-dlopn caused build failure owing
to unresolved alps lli symbols in the libopal-pal shared library.
This commit fixes this problem.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
there is no need for a configure option as well - so remove the
--enable-orte-static-ports configure option. When decoding the daemon
nidmap, mark new daemons as ALIVE by default - we will discover dead
ones as we go.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Also update the configure.ac help message for --enable-mca-no-build to
avoid using a framework name that does not exist any more.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
libnl and libnl-3 are known to conflict with each other, so detect
and abort if these two libs are both used directly (e.g. Open MPI
uses libnl-3) or indirectly (e.g. libibverbs.so might depend on libnl)
Multiple conduits can exist at the same time, and can even point to the same base transport. Each conduit can have its own characteristics (e.g., flow control) based on the info keys provided to the "open_conduit" call. For ease during the transition period, the "legacy" RML interfaces remain as wrappers over the new conduit-based APIs using a default conduit opened during orte_init - this default conduit is tied to the OOB framework so that current behaviors are preserved. Once the transition has been completed, a one-time cleanup will be done to update all RML calls to the new APIs and the "legacy" interfaces will be deleted.
While we are at it: Remove oob/usock component to eliminate the TMPDIR length problem - get all working, including oob_stress
* In open-mpi/ompi@f6f24a4f67 I missed
updating the library references for the wrapper compilers.
* Fixes the CXX wrapper compiler and CXX library is renamed as needed.
* Fixes the Java wrapper compiler and the Java library is renamed as needed.
* Add a configure time option to rename libmpi(_FOO).*
- `--with-libmpi-name=STRING`
* This commit only impacts the installed libraries.
Internal, temporary libraries have not been renamed to limit the
scope of the patch to only what is needed.
For example:
```shell
shell$ ./configure --with-libmpi-name=wookie
...
shell$ find . -name "libmpi*"
shell$ find . -name "libwookie*"
./lib/libwookie.so.0.0.0
./lib/libwookie.so.0
./lib/libwookie.so
./lib/libwookie.la
./lib/libwookie_mpifh.so.0.0.0
./lib/libwookie_mpifh.so.0
./lib/libwookie_mpifh.so
./lib/libwookie_mpifh.la
./lib/libwookie_usempi.so.0.0.0
./lib/libwookie_usempi.so.0
./lib/libwookie_usempi.so
./lib/libwookie_usempi.la
shell$
```
--disable-io-ompio is a shortcut that disable the following
frameworks and components
- fbtl
- fcoll
- sharedfp
- common/ompio
- io/ompio
Fixesopen-mpi/ompi#1934
- move the mpi-io configury option into config/ompi_configure_options.m4
- add ompi/mca/common/ompio/configure.m4 so this component is not built when
Open MPI is configure'd with --disable-mpi-io
Fixesopen-mpi/ompi#2009
We disabled this support a long time ago. Probably safe to assume
whatever bug we were working around no longer exists.
Closesopen-mpi/ompi#2044
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Split the CMA test into two parts so that the back-end test only has
to be run once. Fail with --with-cma is specified and cannot be
provided. Remove a few useless quotes. Change
$ompi_check_cma_need_defs and $ompi_check_cma_happy to be numeric
values. Finally, remove a bunch of tabs.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
configury command line is quoted and made available via the OPAL_CONFIGURE_CLI macro.
it can be retrieved via {orte-info,ompi_info,oshmem_info} -c, or
{orte-info,ompi_info,oshmem_info} --all --parseable | grep ^config:cli:
This fixes a regression from open-mpi/ompi@dc5adc5a91
Fortran is only required by ompi, so m4_ifdef([project_ompi],...) protect Fortran related stuff in opal
Fixesopen-mpi/ompi#1884
This fixes a regression from open-mpi/ompi@dc5adc5a91
Fortran is only required by ompi, so m4_ifdef([project_ompi],...) protect Fortran related stuff in opal
Fixesopen-mpi/ompi#1884
This commit improves the CMA detection when the installed glibc doesn't
have support for CMA. In this case we need to verify that the syscall
numbers in opal/include/opal/sys/cma.h are valid for the architecture.
This verification is done by attempting to use CMA while including the
internal header.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
NAG compiler use gcc (and not ld) as a linker, so in order to pass an option to the linker,
the flag is -Wl,-Wl,,<option> and not -Wl,<option>
Thanks Paul Hargrove for the report
Compiler implementations are free to include support for atomics that
use locks. Unfortunately lock-free and lock atomics do not mix. Older
versions of llvm on OS X use locks to provide
__atomic_compare_exchange on 128-bit values but are lock-free on
64-bit values. This screws up our lifo implementation which mixes
64-bit and 128-bit atomics on the same values to improve
performance. This commit adds a configure-time check if 128-bit
atomics are lock free. If they are not then the 128-bit __atomic CAS
is disabled and we check for the __sync version as a fallback.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* atomic: add support for __atomic builtins
This commit adds support for the gcc __atomic builtins. The __sync
builtins are deprecated and have been replaced by these atomics. In
addition, the new atomics support atomic exchange which was not
supported by __sync.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* atomic: add support for transactional memory
This commit adds support for using transactional memory when using
opal atomic locks. This feature is enabled if the __HLE__ feature is
available and the gcc builtin atomics are in use.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Our checks and the ones of libevent are somewhat flawed.
If adding multiple "-framework" to CXXFLAGS or CFLAGS, we strip
the keyword from the command-line, not good.
libevent however assumes plain gcc without testing properly
that the compiler supports -Wno-deprecated-declarations.
This commit changes the asm configure logic to fall back on inline asm
atomics on systems that 1) have __sync atomics, 2) do not have 64-bit
__sync atomics, and 3) support 64-bit asm.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit adds an additional check for 64-bit atomic support for __sync
builtins. If 64-bit support is not available the opal_atomic_*_64 atomics
are disabled.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit fixes a compilation issue with some versions of exp
verbs. In some cases struct ibv_exp_device_attr does not have either
the exp_atom or exp_atomic_cap fields. It is fine to drop one check
and fall back to the non-exp attribute check on the other.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
These macros should really be named OPAL_SUMMARY_*; they're used in
all projects, and therefore should be in the lowest later project (OPAL).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit adds support for runtime binary patching. The support is
broken down into two parts: util/opal_patcher.[ch] which contains the
functionality for runtime patching of symbols, and mca/memory/patcher
which patches the various symbols needed to provide support for memory
hooks. This work is preliminary and is based off work donated by IBM.
The patcher code is disabled if dlopen is disabled.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit updates the check for __sync builtin atomics to see if the
compiler supports both __sync_bool_compare_and_swap and
__sync_add_and_fetch. If either of these functions are not available
then we can't use the __sync builtins.
Fixes#1487
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes the check for sync builtin atomics.
AC_COMPILE_IFELSE is insufficient to check for the builtins. Need to
use AC_LINK_IFELSE.
Fixesopen-mpi/ompi#1487
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Replace all tabs with spaces
* Remove extraneous extra blank line at the end (in some cases, we
were getting *2* blank lines at the end)
* Use `echo " "` instead of `echo` (which may not be portable)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit removes an erroneous else statement from the OSX built-in
atomics check. The else branch sets the built-in atomics support to
BUILTIN_NO if either opal_cv_asm_builtin is not BUILTIN_NO or OSX
atomics support is disabled.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
After 11 years, it's probably ok to say that we're no longer in "early
development" -- disable the "build a debug version of Open MPI by
default if we find a .git directory" behavior.
However, we are keeping the "use compiler picky flags if we find a
.git directory" behavior. That's useful behavior for developers, and
has no effect on performance.
This commit adds two m4 macros: OPAL_SUMMARY_ADD, OPAL_SUMMARY_PRINT.
OPAL_SUMMARY_ADD adds an item to a section in the summary. For example
OPAL_SUMMARY_ADD([[Transports]],[[Foo]],...,[yes]) will add the
following to the summary:
Transports
-----------------------
Foo: yes
With this commit two sections are added: Transports, Resource Managers.
The OPAL_SUMMARY_PRINT macro is called after AC_OUTPUT and prints out
some information about the build (version, projects, etc) and then
the summarys sections. It will additionally print a warning if
internal debugging is enabled.
Example output:
Open MPI configuration:
-----------------------
Version: 3.0.0 a1
Build Open Platform Abstration project: yes
Build Open Runtime project: yes
Build Open MPI project: yes
Build Open SHMEM project: no
MPI C++ bindings (deprecated): no
MPI Fortran bindings: mpif.h, use mpi, use mpi_f08
Debug build: yes
Transports
-----------------------
Cray uGNI (Gemini/Aries): no
Intel Omnipath (PSM2): no
KNEM Shared Memory: no
Linux CMA IPC: no
Mellanox MXM: no
Open UCX: no
OpenFabrics libfabric: no
OpenFabrics Verbs: no
portals4: no
QLogic Infinipath (PSM): no
tcp: yes
XPMEM Shared Memory: no
Resource Managers
-----------------------
Cray Alps: no
Grid Engine: no
LSF: no
Slurm: yes
Torque: yes
INTERNAL DEBUGGING IS ENABLED. DO NOT USE THIS BUILD FOR PERFORMANCE MEASUREMENTS!
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit removes the --with-mpi-thread-multiple option and forces
MPI_THREAD_MULTIPLE support. This cleans up an abstration violation
in opal where OMPI_ENABLE_THREAD_MULTIPLE determines whether the
opal_using_threads is meaningful. To reduce the performance hit on
MPI_THREAD_SINGLE programs an OPAL_UNLIKELY is used for the
check on opal_using_threads in OPAL_THREAD_* macros.
This commit does not clean up the arguments to the various functions
that take whether muti-threading support is enabled. That should be
done at a later time.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Cleanup the configury so we properly check for Singularity under the various typical use-cases
Bring the Singularity support online. We have to turn "off" the sm BTL as it segfaults from inside the container - root cause remains unclear. Also turned "off" the various OPAL shmem components in case they are involved and someone else tries to use them. Happily, the vader BTL works just fine!
Since OS X 10.11 (aka El Capitan) DYLD_LIBRARY_PATH is no more
propagated to children, so try to dlopen libmpi with the full path
using the directory of libmpi_java
Fixesopen-mpi/ompi#1220
Thanks Alexander Daryin for reporting this
NOTE: Building with external pmix *requires* that you also build with external libevent and hwloc libraries. Detect this at configure and error out with large message if this requirement is violated.
Closes#1204 (replaces it)
Fixes#1064
Rename the pmix1xx component to pmix111 so it reflects the actual release it includes
Resolve the problem of PMIx being passed a bogus --with-platform argument when configuring the PMIx tarball code. There is no reason we should be passing --with-platform arguments to any internal subdirectory, so just leave that out when constructing the opal_subdir_args variable.
Update the PMIx code and continue attempting to debug direct modex
Fix a problem in the ORTE PMIx server - there was an early intent to optimize the direct modex by fetching data for all procs from the target job on the remote node, instead of fetching the data one proc at a time. However, this was never completely implemented, and so we would hang if we had multiple overlapping requests for data from more than one proc on the node.
Update PMIx to v1.1.2
Mofed 2.2 does not have the IBV_EXP_QP_INIT_ATTR_ATOMICS_ARG attribute
flag. Add a check to fix compilation for mofed 2.2. This commit only
fixes complilation with the older mofed. It will not allow an Open MPI
compiled with mofed 2.3 or newer to work on a machine with mofed 2.2.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This update adds an additional check (if supported) to see if 8-byte
atomics are supported by the hardware. If 8-byte atomics are not
supported the atomics support is disabled.
This commit also includes some cleanup.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for fetch-and-add and compare-and-swap when
using the mlx5 driver. The support is only enabled if the expanded
verbs interface is detected. This is required because mlx5 HCAs return
the atomic result in network byte order. This support may need to be
tweaked if Mellanox commits their changes into upstream verbs.
Closesopen-mpi/ompi#1077
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
