ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
17 805 коммитов 3 Ветки 0 Теги 130 MiB
73387e50e2
Граф коммитов

3824 Коммитов

Автор SHA1 Сообщение Дата
George Bosilca
ba879c2c51 Remove the unused map. 
This commit was SVN r26960.
 2012-08-07 12:06:13 +00:00
Shiqing Fan
2f442799f8 fix several typecasts 
This commit was SVN r26957.
 2012-08-07 10:41:53 +00:00
Ralph Castain
1f8df92c3c Remove the confusion over which options are "to" and which are "by" by creating synonyms so that either spelling works. 
This commit was SVN r26951.
 2012-08-05 14:40:38 +00:00
Ralph Castain
53b1a1c976 Cleanly error out when someone asks to map-to <object> if that object doesn't exist on a node. 
This commit was SVN r26950.
 2012-08-04 21:52:36 +00:00
Ralph Castain
61b09a132b Fix bynode mapping of multiple app-contexts 
This commit was SVN r26949.
 2012-08-03 21:45:40 +00:00
Ralph Castain
96f6f94c24 Ensure we don't get trapped in an infinite loop when ranking bynode if something isn't right 
This commit was SVN r26948.
 2012-08-03 21:45:10 +00:00
Ralph Castain
0d878937fe If a callback is set in the state machine, and the state doesn't yet exist, create it 
This commit was SVN r26947.
 2012-08-03 21:43:36 +00:00
Ralph Castain
431d5361ed For those who really preferred our prior mode of operation that mapped procs and only launched daemons on the nodes that had procs on them, introduce the "novm" state machine component. This recreates the old mode of operation by re-ordering the launch sequence so that we allocate, then map, and then launch daemons only on the reqd nodes (instead of across the entire allocation). 
This commit was SVN r26946.
 2012-08-03 16:30:05 +00:00
Ralph Castain
dc22ea5cde A little cleaner on the message about repeated ctrl-c, and re-enable the event so we can abort if we see multiple ctrl-c's that don't meet the time requirement 
This commit was SVN r26945.
 2012-08-03 01:26:18 +00:00
Ralph Castain
e6c72bfd53 Ensure we can forcibly exit even when we are stuck inside of an event by replacing the libevent signal handler with a POSIX one that (a) attempts to trip a libevent termination event and (b) if anothe ctrl-c hits within 5 seconds, just calls exit. 
This commit was SVN r26943.
 2012-08-02 21:15:35 +00:00
Ralph Castain
d818c9d407 Includes a patch from Jeff and Josh: update the simulator module to allow specification of multiple slot and max_slot counts for each node group (but don't require it). Remove the requirement that each node group provide its own topology. Adjust verbosities to allow showing some light debug output to see what nodes have been added without getting a bunch of other stuff. 
This commit was SVN r26936.
 2012-08-02 04:57:13 +00:00
Jeff Squyres
62c2ff7ee7 It's actually ''not'' an error to exit if all routes and children are 
gone.  So exit with 0, not ORTE_ERROR_DEFAULT_EXIT_CODE (which is 1).

This fixes a race condition in the rsh launcher upon termination,
where ORTE would sometimes think that a daemon failed to launch.

This commit was SVN r26935.
 2012-08-01 19:49:19 +00:00
Nathan Hjelm
4557e15c18 oob/ud fix compile error 
This commit was SVN r26933.
 2012-07-31 21:50:34 +00:00
Ralph Castain
6ee35e4977 Add num_local_peers to orte_process_info so we don't keep re-computing it, ensure it is available for direct launch via pmi as well 
This commit was SVN r26931.
 2012-07-31 21:21:50 +00:00
Jeff Squyres
88cbe9c780 .ompi_ignore this component until it can be fixed. 
This commit was SVN r26930.
 2012-07-31 21:02:06 +00:00
Nathan Hjelm
980692804d oob/ud: don't start listening for ud requests unless we have one usable port 
This commit was SVN r26929.
 2012-07-31 19:00:18 +00:00
Ralph Castain
23c2a315a9 Add missing line to set flag indicating at least one port found 
This commit was SVN r26914.
 2012-07-30 17:54:38 +00:00
Ralph Castain
6285f7d8c0 Per request of Shiqing, restore the ccp components 
This commit was SVN r26904.
 2012-07-29 23:49:59 +00:00
Ralph Castain
c7f9a0fa34 Check for recursive use of mpirun - issue error message and abort if detected 
This commit was SVN r26903.
 2012-07-28 21:50:56 +00:00
Ralph Castain
94d11e04fd Add an intermediate state when the VM is ready so that third party tools can take action prior to mapping/launching apps 
This commit was SVN r26902.
 2012-07-28 15:33:09 +00:00
Shiqing Fan
660188307c fix an export declaration name 
This commit was SVN r26895.
 2012-07-27 13:26:24 +00:00
Shiqing Fan
42dfbc7d2f Another CMake scripts update for: 
correctly generate hwloc library
automatically define OMPI/OPAL/ORTE_OMPORTS for user applications
update the f77 bindings

This commit was SVN r26893.
 2012-07-27 11:49:09 +00:00
Ralph Castain
8bc6694a62 Ensure the daemons don't incorrectly declare a failed launch 
This commit was SVN r26875.
 2012-07-26 19:05:06 +00:00
Ralph Castain
07846f12ae Reconnect the rsh/ssh error reporting code for remote spawns to report failure to launch. Ensure the HNP correctly reports non-zero exit status when ssh encounters a problem. 
Thanks to Terry for spotting it!

This commit was SVN r26868.
 2012-07-25 21:46:45 +00:00
Jeff Squyres
e5cfad0c1a This variable is only used in FT builds. 
This commit was SVN r26854.
 2012-07-24 12:48:47 +00:00
Shiqing Fan
8c4a3e1269 correct the symbol dllexports for windows build 
This commit was SVN r26827.
 2012-07-22 08:54:50 +00:00
Shiqing Fan
12d99a9ebb Update the hwloc build on Windows and related files. 
This commit was SVN r26818.
 2012-07-20 12:14:28 +00:00
Abhishek Kulkarni
1ce378b5c6 Make C/R work with nodes > 1. This fix makes sure that the app coordinators send 
the "ready-to-checkpoint" signal to the global coordinator only after ORTE has
initialized.

This commit was SVN r26795.
 2012-07-13 23:37:29 +00:00
Abhishek Kulkarni
1878f276cd Replace the pattern while(flag) { opal_progress() }; in the C/R code 
with the ORTE_WAIT_FOR_COMPLETION macro.

This commit was SVN r26794.
 2012-07-13 23:31:56 +00:00
George Bosilca
772ec212eb Fix another compiler warning. 
This commit was SVN r26775.
 2012-07-10 15:57:42 +00:00
Abhishek Kulkarni
eec5a28aa4 More C/R fixes. 
* Fix a typo introduced by the removal of the notifier framework
* Fix to flush the modex cached data correctly using the orte DB API.

This commit was SVN r26773.
 2012-07-10 01:19:46 +00:00
Abhishek Kulkarni
5c58a1c9c1 Fix C/R support in the trunk. 
Among other things, this patch deals with the following issues:
* fix ompi-checkpoint argument parsing
* ompi-restart -showme prints an extraneous "Restarted child with PID" 
  message. Move around the debug statement to avoid this.
* fixes for the state machine changes

This commit was SVN r26770.
 2012-07-09 23:34:13 +00:00
George Bosilca
ec760454a6 Cleaning ... 
This commit was SVN r26747.
 2012-07-04 21:22:13 +00:00
Ralph Castain
cf4606cdd5 Add debug of nidmap subsystem 
This commit was SVN r26739.
 2012-07-04 00:04:16 +00:00
Ralph Castain
6ae5776904 Cleanup IPV6 build 
This commit was SVN r26738.
 2012-07-04 00:03:50 +00:00
Ralph Castain
1a90471374 Drat - missed the other one 
This commit was SVN r26718.
 2012-07-02 22:18:31 +00:00
Ralph Castain
9a6a969f60 Remove debug 
This commit was SVN r26717.
 2012-07-02 22:18:08 +00:00
Ralph Castain
b83fc41d54 Add a state that allows mpirun or other tools to be notified of a job completion prior to terminating so that alternative actions can be performed. 
This commit was SVN r26716.
 2012-07-02 22:16:32 +00:00
Ralph Castain
e335de3564 Refactor ompi_info, splitting it into parts according to the layer involved. Thus, we call down to the opal layer to get those frameworks and components, and down to the orte layer to get those. Still some abstraction breaks, but they mostly involve renaming of OMPI_foo labels that have been around since before we split the build system by layer. 
This commit was SVN r26695.
 2012-06-28 18:23:34 +00:00
Ralph Castain
8bebf2fa47 Ensure we don't build the MR iof components unless hadoop support is enabled 
This commit was SVN r26694.
 2012-06-28 18:20:15 +00:00
Ralph Castain
9aa821d8b4 Add missing file to tarball 
This commit was SVN r26688.
 2012-06-28 02:57:10 +00:00
Ralph Castain
0dfe29b1a6 Roll in the rest of the modex change. Eliminate all non-modex API access of RTE info from the MPI layer - in some cases, the info was already present (either in the ompi_proc_t or in the orte_process_info struct) and no call was necessary. This removes all calls to orte_ess from the MPI layer. Calls to orte_grpcomm remain required. 
Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework.

Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one.

This commit was SVN r26678.
 2012-06-27 14:53:55 +00:00
Brian Barrett
b22faedd9d Remove the Portals4 SHMEM reference implementation runtime support, as we're 
no longer using the runtime provided by the reference implementation.

Remove the Catamount support from ORTE, since we're no longer supporting
Catamount.  Left the Catamount timer component, because I'm not sure whether
it's used on the XTs running CNL.

This commit was SVN r26677.
 2012-06-27 14:17:43 +00:00
Josh Hursey
28681deffa Backout the ORCA commit. :( 
There is a linking issue on Mac OSX that needs to be addressed before this is able to come back into the trunk.

This commit was SVN r26676.
 2012-06-27 01:28:28 +00:00
Josh Hursey
542330e3a7 Commit of ORCA: Open MPI Runtime Collaborative Abstraction 
This is a runtime interposition project that sits between the OMPI and ORTE layers in Open MPI.

The project is described on the wiki:
  https://svn.open-mpi.org/trac/ompi/wiki/Runtime_Interposition

And on this email thread:
  http://www.open-mpi.org/community/lists/devel/2012/06/11109.php

This commit was SVN r26670.
 2012-06-26 21:42:16 +00:00
Ralph Castain
a34f09e67a Ensure common port is off when not being used 
This commit was SVN r26666.
 2012-06-26 16:09:58 +00:00
Ralph Castain
92527da4e3 Remove unused component 
This commit was SVN r26660.
 2012-06-26 00:49:28 +00:00
Ralph Castain
0103f82918 Turn off the common port for slurm for now 
This commit was SVN r26656.
 2012-06-25 21:55:51 +00:00
Ralph Castain
b990c65a53 Remove another antiquated dss function - the 'size' API isn't used anywhere since the GPR went away 
This commit was SVN r26646.
 2012-06-25 13:33:45 +00:00
Shiqing Fan
6f746cdb33 remove a unused file. 
This commit was SVN r26645.
 2012-06-25 10:17:21 +00:00
Ralph Castain
abe7dd8274 Cleanup the dss by removing unused functions 
This commit was SVN r26644.
 2012-06-23 21:20:09 +00:00
Ralph Castain
9680c52f5e Add mrplus examples to tarball 
This commit was SVN r26643.
 2012-06-23 02:40:46 +00:00
Jeff Squyres
148ae6d6e3 This commit unifies the configury of some verbs-lovin' components. 
* Add new configure command line options and deprecate some old ones:
   * --with-verbs replaces --with-openib
   * --with-verbs-libdir replaces --with-openib-libdir
 * If you specify --with-openib[-libdir] without
   --with-verbs[-libdir], you'll get a "these options have been
   deprecated!" warning, but then they'll act just like
   --with-verbs[--libdir]. 

  '''Sidenote:''' Note that we are not renaming any components at this
  time, nor are we renaming the top-level OMPI_CHECK_OPENIB m4 macro
  (which is pretty strongly tied to the openib BTL and is bastaridzed
  by the ofud BTL).  Note that there will likely be more changes in
  this area coming soon (next week?) when some long-standing changes
  move to the SVN trunk: some openib BTL infrastructure will move to
  ompi/mca/common, and its configury gets split up / refactored.

We extend our philosophy of other --with-<foo> configure options of
--with-verbs to ''all'' verbs-lovin components:

 * If you specify --with-verbs, then all verbs-lovin' components must
   configure successfully (or abort).  This currently means: OOB ud,
   BTL ofud, BTL openib.
 * If you specify --with-verbs=DIR, then all verbs-lovin' component
   must configure successfully (or abort), and will use DIR to find
   verbs headers and libraries.
 * If you specify --without-verbs, then all verbs-lovin' components
   will be ignored.

This commit also fixes a problem where the --with-openib=DIR form
would not use DIR for ''all'' verbs-lovin' components (I think only
BTL openib and BTL ofud used that DIR).  Now all of them do, as does
hwloc (because hwloc has some !OpenFabrics helper functions that
require ibv types from verbs.h).

There's a little new m4 infrastructure worth mentioning:

 * If you create a new verbs-lovin' component (i.e., a component that
   need verbs), your configure.m4 should
   AC_REQUIRE([OPAL_CHECK_VERBS_DIR]). 
 * You can then use three global shell variables: $opal_want_verbs,
   $opal_verbs_dir, $opal_verbs_libdir, which will be set as follows:
   * opal_want_verbs will be "yes" and opal_verbs_dir and
     opal_verbs_libdir will both be set to directory values, '''OR'''
   * opal_want_verbs will be "no" and opal_verbs_dir and
     opal_verbs_libdir will both be set empty

This commit was SVN r26640.
 2012-06-22 19:53:56 +00:00
Ralph Castain
e6f3586415 Remove the orte notifier framework, per discussion at the devel meeting and follow-up with Jeff (who took the action item) 
This commit was SVN r26637.
 2012-06-22 18:09:23 +00:00
Ralph Castain
60758faa55 Fix data type 
This commit was SVN r26633.
 2012-06-21 23:48:55 +00:00
Ralph Castain
e9591f2563 Fix tree spawn in the rsh/qrsh environment 
This commit was SVN r26631.
 2012-06-21 21:29:28 +00:00
Brian Barrett
9af72072a3 Use MKDIR_P instead of mkdir_p in Makefiles, as MKDIR_P is the only one 
defined in recent versions of AC/AM.

This commit was SVN r26625.
 2012-06-21 16:52:37 +00:00
Ralph Castain
019857b616 Ensure that we don't attempt to use common ports if --disable-static was specified. 
This commit was SVN r26620.
 2012-06-20 03:14:11 +00:00
Ralph Castain
0a713cd27e Add database framework to ORTE and refactor modex code to utilize it. Create the "hash" db component from the prior modex db code. Leave the other components ignored for now - will activate them later. 
Modex is still a blocking operation at this point.

This commit was SVN r26618.
 2012-06-19 13:38:42 +00:00
Ralph Castain
9e0bb6ae28 Revert r26600 and r26601 for a couple of reasons: 
1. they modified the OMPI-ORTE interface, which is something I promised to avoid doing unless absolutely necessary, and

2. the framework ident is already in the component name key provided to the modex db. What is missing is the project ident, but as Jeff and I discussed last week, we really need to add that field to the component struct anyway to avoid multi-project collisions on framework names. That will be done over the next couple of weeks as a separate effort.

This commit was SVN r26613.

The following SVN revision numbers were found above:
  r26600 --> open-mpi/ompi@5ba4deff07
  r26601 --> open-mpi/ompi@0e3094c318
 2012-06-16 09:11:03 +00:00
Ralph Castain
9b026c6695 For now, run MTT with the use_common_port option enabled. This would be the desirable scenario for users, especially at scale, so let's see if it creates any issues. 
This commit was SVN r26609.
 2012-06-15 15:46:38 +00:00
Ralph Castain
3c2a03b16d Update the other routed components to use common ports. Per conversation with Josh, remove the "cm" component. 
This commit was SVN r26608.
 2012-06-15 15:36:08 +00:00
Ralph Castain
96c778656a Improve launch performance on clusters that use dedicated nodes by instructing the orteds to use the same port as the HNP, thus allowing them to "rollup" their initial callback via the routed network. This substantially reduces the HNP bottleneck and the number of ports opened by the HNP. 
Restore enable-static-ports option by default - the Cray will have to disable it to get around their library issues, but that's just a warning problem as opposed to blocking the build.

This commit was SVN r26606.
 2012-06-15 10:15:07 +00:00
Ralph Castain
0e3094c318 Update the other grpcomm modules to new API 
This commit was SVN r26601.
 2012-06-14 03:28:48 +00:00
Ralph Castain
5ba4deff07 Extend the modex database to support multiple projects and frameworks that might have duplicate component names. No visible API change in the BTL's as it was executed solely in the ompi modex code. 
This commit was SVN r26600.
 2012-06-14 02:55:06 +00:00
Ralph Castain
ecc51d8583 Add missing endif 
This commit was SVN r26596.
 2012-06-12 15:07:09 +00:00
Ralph Castain
078a4667e4 Some more cleanup on direct routed when daemons are involved 
This commit was SVN r26594.
 2012-06-11 23:46:22 +00:00
Ralph Castain
cee5a75d19 Revert the default configuration to no orte progress thread and no libevent thread support until we can get more of the kinks ironed out. 
This commit was SVN r26593.
 2012-06-11 20:52:28 +00:00
Ralph Castain
9506ac1617 Remove debug 
This commit was SVN r26592.
 2012-06-11 20:02:53 +00:00
Ralph Castain
269cb2b8d9 Some cleanup to remove calls to opal_progress when running with orte progress threads, and to ensure that all orte-related events are in the orte event base. 
This commit was SVN r26591.
 2012-06-11 19:59:53 +00:00
Ralph Castain
75e66ad51e Restore the direct routed component 
This commit was SVN r26590.
 2012-06-11 17:16:02 +00:00
Brian Barrett
7406ef1241 Make all the PMI components depend on the common pmi library and properly 
install the common pmi library

This commit was SVN r26588.
 2012-06-11 15:58:09 +00:00
Ralph Castain
2812579246 Just because we find an IB device does not mean we can get a QP on it. Check to see if we can before we select the UD OOB module for use. 
This commit was SVN r26587.
 2012-06-10 01:42:51 +00:00
Ralph Castain
0442a807c0 Default the OOB to the "ud" component IFF the HNP finds itself on a node with a supported Infiniband device. Ensure that the daemons all pick the matching component by dictating the selection via mca param on the orted cmd line. 
This commit was SVN r26582.
 2012-06-08 01:23:08 +00:00
Ralph Castain
05122a2f93 Make debruijn the default routed component. Update the radix component to "short-circuit" the tree when the job size permits 
This commit was SVN r26580.
 2012-06-08 00:35:36 +00:00
Ralph Castain
ffcca0185a Remove no longer needed component 
This commit was SVN r26578.
 2012-06-08 00:18:59 +00:00
Ralph Castain
980768965f Remove unused and unsupported component 
This commit was SVN r26577.
 2012-06-07 23:48:06 +00:00
Ralph Castain
350900f70e Remove unused and unsupported component 
This commit was SVN r26576.
 2012-06-07 23:47:35 +00:00
Nathan Hjelm
625c8078c3 oob/ud: fix typo 
This commit was SVN r26569.
 2012-06-07 19:21:23 +00:00
Ralph Castain
7a94a52420 No reason not to build this 
This commit was SVN r26568.
 2012-06-07 19:11:44 +00:00
Ralph Castain
5876496f4c Enable orte progress threads and libevent thread support by default 
This commit was SVN r26565.
 2012-06-07 04:25:00 +00:00
Shiqing Fan
2abf783fa0 Remove a unnecessary definition before the real one. 
This commit was SVN r26562.
 2012-06-06 14:15:39 +00:00
Ralph Castain
166d254d4e Add new routed component 
This commit was SVN r26557.
 2012-06-06 11:53:12 +00:00
Ralph Castain
d6279fc971 Fix the debugger daemon launch support to fit the new state machine. Treat debugger daemons just like any other job, except that we map them only to nodes where an app process currently exists (as opposed to every node in the system). Trigger breakpoint and rank0 release only after the debugger daemons are in position. 
This commit was SVN r26556.
 2012-06-06 02:01:23 +00:00
Jeff Squyres
0b8849e2c4 Make "mpirun --report-bindings" have a user-friendly output (i.e., 
readable by normal human beings, vs. having a bitmap of physical
PU's).  Use the new hwloc base prettyprint functions to generate the
output. 

This commit was SVN r26533.
 2012-06-01 16:35:31 +00:00
Jeff Squyres
99c5afb397 Remove clang compiler warnings. 
This commit was SVN r26523.
 2012-05-29 23:36:06 +00:00
Ralph Castain
b0938a254e Dont use mutex where it isn't needed 
This commit was SVN r26521.
 2012-05-29 20:21:11 +00:00
Ralph Castain
32b66c166b Missed one blasted spot 
This commit was SVN r26520.
 2012-05-29 20:20:10 +00:00
Ralph Castain
9bedb25dda Cleanup some compiler warnings, some of which are actual logic errors 
This commit was SVN r26519.
 2012-05-29 20:11:51 +00:00
Ralph Castain
d7ac424d8d Silence optimized build warnings 
This commit was SVN r26518.
 2012-05-29 19:55:47 +00:00
Ralph Castain
bf5ec1ac0c Silence optimized build warnings 
This commit was SVN r26517.
 2012-05-29 19:55:31 +00:00
Shiqing Fan
08d553d7bf Add a file to the installation list. 
This commit was SVN r26507.
 2012-05-29 13:58:23 +00:00
Ralph Castain
9883f42caf Add missing commit 
This commit was SVN r26501.
 2012-05-28 02:20:20 +00:00
Ralph Castain
e705de1ce6 Complete nidmap cleanup - we don't know our node until we have unpacked all the jobs since our job is always the last one, so wait until all jobs are unpacked before assigning locality 
This commit was SVN r26500.
 2012-05-27 18:37:57 +00:00
Ralph Castain
be6ed9c2df Allow partial use of allocations by specifying the max number of daemons (i.e., max VM size) for the job 
This commit was SVN r26499.
 2012-05-27 16:48:19 +00:00
Ralph Castain
c69a04e16b Cleanup the pidmap decoding for apps to avoid confusion 
This commit was SVN r26498.
 2012-05-27 16:21:38 +00:00
Ralph Castain
31beff6362 Oops - if we don't want the Java bindings, then we really shouldn't be building them :-/ 
Also ensure we don't try to build them if no Java support was found, and error out if the user requests the bindings and we didn't find Java support.

Add a configure flag to skip the Java tests and just force-set the Java support to "disabled"

This commit was SVN r26484.
 2012-05-23 19:51:27 +00:00
Ralph Castain
7fb49b1559 Silence warning 
This commit was SVN r26480.
 2012-05-23 13:59:41 +00:00
Ralph Castain
da28a4b0e6 Silence warning 
This commit was SVN r26479.
 2012-05-23 13:59:22 +00:00
Jeff Squyres
7969faf372 Fixes trac:3057: minor update to the man page to state that slot locations 
in rankfiles use ''physical'' device indexes (vs. logical indexes).

This commit was SVN r26478.

The following Trac tickets were found above:
  Ticket 3057 --> https://svn.open-mpi.org/trac/ompi/ticket/3057
 2012-05-23 11:43:33 +00:00
Nathan Hjelm
b9959a95cd ack! one more 
This commit was SVN r26472.
 2012-05-22 20:52:52 +00:00
Nathan Hjelm
f2d4e95429 doh! add missing include 
This commit was SVN r26471.
 2012-05-22 20:49:13 +00:00
Nathan Hjelm
cdc3c87ba6 move pmi init/finalize into a common component 
This commit was SVN r26470.
 2012-05-22 15:15:39 +00:00
Nathan Hjelm
78b8b3cf76 bug fix: actually close ess components 
This commit was SVN r26469.
 2012-05-22 15:09:18 +00:00
Ralph Castain
b217124bd8 Symlink instead of copy 
This commit was SVN r26464.
 2012-05-21 23:07:48 +00:00
Ralph Castain
da3873af6f Rename the mapreduce tool to "mr+" per the marketing types 
This commit was SVN r26463.
 2012-05-21 21:17:44 +00:00
Nathan Hjelm
6eeca66475 add an option to enable static ports. diabled by default 
This commit was SVN r26462.
 2012-05-21 19:56:15 +00:00
Ralph Castain
83d69b6c95 Enable the ORTE progress thread for apps (not needed in the tools as they already continuously loop in the event lib). This appears to be working, at least for MPI apps that only use shared memory (a simple "hello"). More testing is required to identify where problems will occur - this is only intended to allow further development. 
In order to use the progress thread, you must configure with:

--enable-orte-progress-threads --enable-event-thread-support

This commit was SVN r26457.
 2012-05-20 15:14:43 +00:00
Ralph Castain
c4f8043064 Per Nathan, with a little cleanup by me: update the PMI support to aggregate modex info, thus reducing the number of keys required so it fits within Cray default constraints 
This commit was SVN r26456.
 2012-05-19 16:12:52 +00:00
Ralph Castain
a526afae92 Ensure we always cleanup local procs, no matter how we exited. 
This commit was SVN r26454.
 2012-05-18 23:37:40 +00:00
Ralph Castain
12ebc0e269 Don't need this to be a bin program as the class is captured in the jar 
This commit was SVN r26453.
 2012-05-18 23:37:18 +00:00
Ralph Castain
b16e43f489 Silence a warning on Mac 
This commit was SVN r26449.
 2012-05-18 15:27:04 +00:00
Ralph Castain
ca1b325738 Tweak the java setup so it works better on Mac. Only build mapreduce and allocators if hadoop support was requested. 
This commit was SVN r26448.
 2012-05-18 01:02:01 +00:00
Jeff Squyres
cab31eafce Revert r26413: it was causing too much confusion. When an MPI proc 
exits with status 77, the whole job will be killed, but mpirun will
still return an exit status of 77, so MTT will report it as a skip
anyway. 

This commit was SVN r26445.

The following SVN revision numbers were found above:
  r26413 --> open-mpi/ompi@02aa36f2e5
 2012-05-16 14:45:58 +00:00
Jeff Squyres
dab7d36a81 Fix location of the default hostfile. Thanks to Götz Waschk for 
identifying the problem.

This commit was SVN r26441.
 2012-05-15 16:13:39 +00:00
Jeff Squyres
2d78728d38 Fix the macro name in the comment: it's EXTRA_DIST, not EXTRA_SOURCES. 
This commit was SVN r26429.
 2012-05-10 14:07:36 +00:00
Jeff Squyres
b325c17c72 It's a little weird to put in a blank _SOURCES line for the 
HDFSFileFinder PROGRAM, but if we don't put in a _SOURCES line at all,
Automake will default to "HDFSFileFinter_class_SOURCES =
HDFSFileFinder.c", which clearly will cause problems.  

But we don't want to put the .java file in _SOURCES, either, because
we haven't configured Automake to handle Java (because current
versions of Automake only have GCJ, not other Java compilers).  So set
HDFSFileFinder_class_SOURCES to blank and list the .java file in
EXTRA_SOURCES (so that they get picked up for "make dist").

This commit was SVN r26424.
 2012-05-10 13:54:51 +00:00
Ralph Castain
b9d560263f Ensure we properly handle systems that do not have a jdk installed 
This commit was SVN r26421.
 2012-05-10 12:06:59 +00:00
Ralph Castain
b143633593 Fix java config 
This commit was SVN r26420.
 2012-05-10 01:51:02 +00:00
Ralph Castain
640f0610aa Fix the makefile to install the perl scripts properly 
This commit was SVN r26416.
 2012-05-09 14:06:02 +00:00
Ralph Castain
fd796cce0a Add an allocator tool for finding HDFS file locations and obtaining allocations for those nodes (supports both Hadoop 1 and 2). Split the Java support into two parts: detection of Java support and request for Java bindings. 
This commit was SVN r26414.
 2012-05-09 01:13:49 +00:00
Jeff Squyres
02aa36f2e5 ORTE defaults to killing the entire job when any process exits with a 
nonzero status (we polled other MPI implementations since one one in
the OMPI community had a concrete opinion on what behavior to do here
-- all other MPI's seem to adhere to this behavior, too).

This commit adds an MCA parameter that allows us to tell ORTE to
''not'' kill jobs when a process exits with a status of 77, meaning
the GNU testing standard of "this test was skipped".  In all the OMPI
tests, all procs will either return 77 or not.  So if they all return
77, mpirun won't consider it an error, but will still return an exit
status of 77 (so that MTT can know that the test was cleanly skipped).

This commit was SVN r26413.
 2012-05-08 21:49:05 +00:00
Ralph Castain
84d031d6c1 Add daemon object to job array after creation 
This commit was SVN r26406.
 2012-05-08 13:39:20 +00:00
Ralph Castain
70a106fa71 Fix binding on remote nodes - need to pass the binding bitmap! 
This commit was SVN r26403.
 2012-05-08 03:52:39 +00:00
Jeff Squyres
2ba10c37fe Per RFC, bring in the following changes: 
* Remove paffinity, maffinity, and carto frameworks -- they've been
   wholly replaced by hwloc.
 * Move ompi_mpi_init() affinity-setting/checking code down to ORTE.
 * Update sm, smcuda, wv, and openib components to no longer use carto.
   Instead, use hwloc data.  There are still optimizations possible in
   the sm/smcuda BTLs (i.e., making multiple mpools).  Also, the old
   carto-based code found out how many NUMA nodes were ''available''
   -- not how many were used ''in this job''.  The new hwloc-using
   code computes the same value -- it was not updated to calculate how
   many NUMA nodes are used ''by this job.''
   * Note that I cannot compile the smcuda and wv BTLs -- I ''think''
     they're right, but they need to be verified by their owners.
 * The openib component now does a bunch of stuff to figure out where
   "near" OpenFabrics devices are.  '''THIS IS A CHANGE IN DEFAULT
   BEHAVIOR!!''' and still needs to be verified by OpenFabrics vendors
   (I do not have a NUMA machine with an OpenFabrics device that is a
   non-uniform distance from multiple different NUMA nodes).
 * Completely rewrite the OMPI_Affinity_str() routine from the
   "affinity" mpiext extension.  This extension now understands
   hyperthreads; the output format of it has changed a bit to reflect
   this new information.
 * Bunches of minor changes around the code base to update names/types
   from maffinity/paffinity-based names to hwloc-based names.
 * Add some helper functions into the hwloc base, mainly having to do
   with the fact that we have the hwloc data reporting ''all''
   topology information, but sometimes you really only want the
   (online | available) data.

This commit was SVN r26391.
 2012-05-07 14:52:54 +00:00
Ralph Castain
44b8608f0a Convert debug to verbose 
This commit was SVN r26384.
 2012-05-05 17:46:10 +00:00
Ralph Castain
96bfeb591c Ensure flag is passed to remote daemons 
This commit was SVN r26383.
 2012-05-03 22:31:25 +00:00
Ralph Castain
45fee2b491 Resolve the case where only the HNP is in the system (i.e., single-node operation) 
This commit was SVN r26382.
 2012-05-03 18:00:01 +00:00
Ralph Castain
c352ca36c2 Minor cleanup 
This commit was SVN r26381.
 2012-05-02 21:23:37 +00:00
Ralph Castain
b2f77bf08f Extend the iof by adding two new components to support map-reduce IO chaining. Add a mapreduce tool for running such applications. 
Fix the state machine to support multiple jobs being simultaneously launched as this is not only required for mapreduce, but can happen under comm-spawn applications as well.

This commit was SVN r26380.
 2012-05-02 21:00:22 +00:00
Ralph Castain
40c2fc5f55 Update the tests, add a couple 
This commit was SVN r26379.
 2012-05-02 19:00:05 +00:00
Ralph Castain
c5da4f24d7 Fix stupid singletons - get the pidmap message correct 
This commit was SVN r26378.
 2012-05-02 17:48:02 +00:00
Ralph Castain
8f7bf3344a Update test 
This commit was SVN r26370.
 2012-05-01 18:38:44 +00:00
Ralph Castain
4542070cf2 Add event priority inversion test 
This commit was SVN r26369.
 2012-05-01 16:42:22 +00:00
Ralph Castain
a8db2fc95f Add procs to each node's map on the daemons 
This commit was SVN r26368.
 2012-05-01 16:41:35 +00:00
Ralph Castain
a927318ea1 Add -N option as synonym for "npernode" 
This commit was SVN r26367.
 2012-05-01 16:18:14 +00:00
Ralph Castain
9f724db182 Remove duplicate event assignment 
This commit was SVN r26360.
 2012-04-30 16:06:20 +00:00
Ralph Castain
289f9f41ec From long-term discussions, have the daemons use the node_t and proc_t structs and arrays instead of the pidmap and nidmap arrays. Sets the stage for future work. 
This commit was SVN r26359.
 2012-04-29 00:10:01 +00:00
Ralph Castain
47a5e30095 Ensure debug output levels if we are debugging 
This commit was SVN r26358.
 2012-04-29 00:03:28 +00:00
Ralph Castain
f3e3704c9e Per request from Brian, enable mapping of stddiag output (output from opal_output calls) to stderr of the local process. This allows you to obtain that output in a local window (for example, when using xterm for each process) instead of having it automatically forwarded to mpirun. Turn this on automatically whenever someone uses the -xterm option, and to be set manually using the orte_map_stddiag_to_stderr mca param. 
This commit was SVN r26352.
 2012-04-27 14:39:34 +00:00
Jeff Squyres
46f47e08b6 Remove typo/extra brackets and parens. 
This commit was SVN r26351.
 2012-04-27 13:48:43 +00:00
Jeff Squyres
9d0df5a9a6 Update configury in the new oob ud component: actually check to see if 
it succeeds and run $1 or $2, accordingly.  This allows "make dist" to
run properly on machines that do not have OpenFabrics stuff installed
(e.g., the nightly tarball build machine).

There's still more to be done here -- it doesn't check for non-uniform
directories where the OpenFabrics headers/libraries might be
installed.  We might need to re-tool/combine
ompi/config/ompi_check_openib.m4 (which checks for way more than
oob/ud needs) and move it up to config/ompi_check_ofa.m4, or
something...?

This commit was SVN r26350.
 2012-04-27 11:32:56 +00:00
Jeff Squyres
9829d2279f System-level includes should be at the top of the file, before most 
OPAL/ORTE/OMPI includes.

This commit was SVN r26349.
 2012-04-27 11:29:22 +00:00
Ralph Castain
38af7db183 Ensure the progress message comes out right away. Otherwise, on a large system where proc state messages are arriving frequently, the message doesn't get printed until the launch is done! 
This commit was SVN r26346.
 2012-04-26 23:41:03 +00:00
Nathan Hjelm
e1e0d466e5 Merge ssh://ct-fe1/usr/projects/hpctools/hjelmn/ompi-trunk-git into HEAD 
This commit was SVN r26344.
 2012-04-26 22:06:12 +00:00
Ralph Castain
3461809341 Fix reporting of launch progress so the numbers are correct and appear when they should 
This commit was SVN r26342.
 2012-04-26 00:10:09 +00:00
Ralph Castain
3b5b185c86 Don't double free timer events 
This commit was SVN r26341.
 2012-04-25 17:36:12 +00:00
Jeff Squyres
501a86afe1 No need to include the generated files in the tarball. Thanks to 
Eugene for pointing this out.

This commit was SVN r26339.
 2012-04-25 14:19:18 +00:00
Ralph Castain
71805bf7e4 Clearout the startup_timeout event if the job did in fact start. Have ORTE_TERMINATE use the job state macro so debug will show where it was called 
This commit was SVN r26334.
 2012-04-25 01:05:17 +00:00
Jeff Squyres
708b497968 Ensure to unset the iof "active" flag after the libevent read callback 
fires (it's already reset once we queue up the read event again).  Failure
to unset the active flag would cause other logic to not queue up the
read event again, because it thought the read event was still active).

This commit was SVN r26311.
 2012-04-23 15:58:12 +00:00
Ralph Castain
7999266f99 Silence warning by removing unused var 
This commit was SVN r26275.
 2012-04-17 22:34:48 +00:00
Ralph Castain
f68487016c Add test code from Terry. Properly terminate if we don't abort on non-zero exit 
This commit was SVN r26271.
 2012-04-16 16:44:23 +00:00
Ralph Castain
ddfbde587f Change the default to "abort" the job when any process exits with a non-zero status. Add the required code to ensure the orted tells the HNP about the problem. 
This commit was SVN r26270.
 2012-04-13 21:19:46 +00:00
Ralph Castain
7741ba47be Fix comm_spawn that spans multiple nodes 
This commit was SVN r26268.
 2012-04-13 01:59:07 +00:00
Ralph Castain
4d16790836 Fix collectives for jobs running across partial allocations 
This commit was SVN r26267.
 2012-04-13 00:38:47 +00:00
Ralph Castain
5d14fa7546 Fix mpi_abort, minimize error output. 
This commit was SVN r26266.
 2012-04-11 14:37:08 +00:00
Ralph Castain
d3dfba3872 Fix the scenario where an MPI error handler causes a proc to exit after finalize, but with non-zero status to indicate an error occurred. 
This commit was SVN r26265.
 2012-04-11 02:23:46 +00:00
Ralph Castain
9cd4c06488 Get things to build and run when --disable-orte is specified 
This commit was SVN r26263.
 2012-04-10 21:50:01 +00:00
Ralph Castain
14d5525fb1 Some minor cleanups. Get singletons working. Cleanup abort handling so it gets properly identified. 
This commit was SVN r26261.
 2012-04-10 19:08:54 +00:00
Ralph Castain
53bbcf4b5b Plug slot allocation leak 
This commit was SVN r26260.
 2012-04-10 14:56:24 +00:00
Ralph Castain
f5cd996b91 Fix the case where n=1 
This commit was SVN r26258.
 2012-04-09 22:44:56 +00:00
Ralph Castain
a34be856aa Now that we have PMI support, this is no longer needed 
This commit was SVN r26254.
 2012-04-07 13:36:24 +00:00
Ralph Castain
71f9e69c62 Remove stale code 
This commit was SVN r26253.
 2012-04-07 13:34:12 +00:00
Ralph Castain
19630ca28d Remove stale code 
This commit was SVN r26252.
 2012-04-07 13:33:40 +00:00
Ralph Castain
93bbeabc55 Remove stale code 
This commit was SVN r26251.
 2012-04-07 13:33:30 +00:00
Ralph Castain
b6cde9a8d1 Remove stale code 
This commit was SVN r26250.
 2012-04-07 13:33:18 +00:00
Ralph Castain
48de3a2501 Minor fixes so orte_progress_thread can work 
This commit was SVN r26248.
 2012-04-06 15:50:49 +00:00
George Bosilca
319f76d66a Low hanging fruit. Remove a declared but not defined function. 
This commit was SVN r26245.
 2012-04-06 15:43:28 +00:00
Ralph Castain
ed197acaa2 Eliminate stale code 
This commit was SVN r26244.
 2012-04-06 15:31:13 +00:00
Ralph Castain
bd8b4f7f1e Sorry for mid-day commit, but I had promised on the call to do this upon my return. 
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.

Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.

This commit was SVN r26242.
 2012-04-06 14:23:13 +00:00
Josh Hursey
1941f6b3b1 Cleanup some compiler warnings when doing an optimized/non-debug build. 
This commit was SVN r26236.
 2012-04-04 20:40:16 +00:00
Ralph Castain
ca3ff58c76 Ensure we get a non-zero exit status when we can't find the specified fork agent. Output a better error message, and ensure we don't multiply report the problem. 
This commit was SVN r26191.
 2012-03-24 00:49:38 +00:00
Ralph Castain
6dc44dc4b8 Look at the basename of the appname for the "java" keyword 
This commit was SVN r26190.
 2012-03-24 00:38:18 +00:00
Ralph Castain
46b040c79f Fix typo 
This commit was SVN r26189.
 2012-03-24 00:31:05 +00:00
Ralph Castain
2bd75ec7e3 Fix Cray XE builds - the priority here needs to equal that of the HNP component so that both build. Otherwise, mpirun tries to use PMI for its basis, and that doesn't work! 
This commit was SVN r26188.
 2012-03-23 20:06:34 +00:00
Ralph Castain
811413e9bc Correctly handle multiple cpu-set ranges. Correctly support optional binding directives combined with cpu-set. 
This commit was SVN r26187.
 2012-03-23 14:50:41 +00:00
Ralph Castain
ce0caf7567 Support -cpu-set by binding to the specified cpus in the absence of any other binding directive. Allows users to subdivide nodes for multiple parallel mpirun invocations. 
This commit was SVN r26186.
 2012-03-23 14:05:52 +00:00
Ralph Castain
33ed3cda07 Update the gridengine allocator to support data from multiple queues by checking for duplicate node entries 
This commit was SVN r26148.
 2012-03-15 17:45:50 +00:00
Josh Hursey
4dd9f89a99 Create an MCA parameter (ess_base_stream_buffering) that allows the user to override the system default for buffering of stdout/stderr streams. See 'man setvbuf' for more information. 
Note: I am working on a system that buffered all output until the application fishished due to a default of 'fully buffered.' This makes debugging painful. This switch fixed the problem by allowing me to adjust the buffering.

This commit was SVN r26119.
 2012-03-08 22:02:28 +00:00
Josh Hursey
a595525366 Add the callers name to the 'comm failed' error message, so we know between which two peers the communication failed. 
This commit was SVN r26117.
 2012-03-08 21:55:19 +00:00
Ralph Castain
e71e871bae Initialize sink location when stdin is forwarded to all ranks 
This commit was SVN r26107.
 2012-03-06 15:47:04 +00:00
Ralph Castain
366f9d1518 Add some missing localities to the hwloc pretty-print, fix pmi modex 
This commit was SVN r26105.
 2012-03-06 06:21:10 +00:00
Ralph Castain
c3cf46af65 Ensure install_dirs are filled in before parsing prefix 
This commit was SVN r26093.
 2012-03-03 23:14:15 +00:00
Ralph Castain
75f738bfce Fix one last place 
This commit was SVN r26092.
 2012-03-03 00:39:37 +00:00
Ralph Castain
834a86420b Ensure we use the slurm module for slurm environments, and correct init order in pmi module when used by daemons 
This commit was SVN r26089.
 2012-03-02 23:10:48 +00:00
Ralph Castain
53edc28fe5 Fix memory issue - pidmap relative locality is only defined for apps. 
This commit was SVN r26088.
 2012-03-02 23:10:10 +00:00
Ralph Castain
b8f093d1a0 Switch precedence - take the --prefix value over the absolute-path-to-mpirun so the backend prefix can be different from that of mpirun on hetero machines. 
This commit was SVN r26085.
 2012-03-02 22:59:13 +00:00
Ralph Castain
6c93dd13b0 Cleanup the prefix handling by mpirun. Important note: we do NOT support per-app_context prefixes!! 
Don't let app_files trump given prefix values. Assign according to following precedence rules:

1. absolute path to mpirun, if given
2. --prefix value, if given to mpirun
3. default prefix, if configured with --enable-orterun-prefix-default
4. prefix from first app in app_file, if given
5. no prefix

This commit was SVN r26081.
 2012-03-02 19:48:25 +00:00
Ralph Castain
ceb34ed0c9 Fix typo 
This commit was SVN r26079.
 2012-03-02 09:58:09 +00:00
Jeff Squyres
97b3603036 A bunch of fixes and improvements to Open MPI's various command line tools. 
* fixed some bugs where "unknown" tokens were allowed on the command
   line (which should really only be used for ortertun).
 * if an unknown token is encountered, print a short error to stderr
   and quit with a nonzero exit status
 * if we don't find the right number of parameters to an option, print
   a short error to stderr and quit with a nonzero exit status
 * when --help is given, print the help message to stdout (not stderr)
   and quit with a zero exit status
 * added --showme:help option to the wrapper compilers
 * updated docs in opal/util/cmd_line.h
 * other small/miscellaneous CLI parsing bugs in various tools

I won't bore you with what we did before.  :-)  Here's some examples
of what the new behavior looks like:

{{{
% ompi_info --bogus
ompi_info: Error: unknown option "--bogus"
Type 'ompi_info --help' for usage.
% ompi_info --param bogus
ompi_info: Error: option "--param" did not have enough parameters (2)
Type 'ompi_info --help' for usage.
%
}}}

This commit was SVN r26072.
 2012-02-29 17:52:38 +00:00
Ralph Castain
b2f1bade37 Fix the -H localhost issue 
This commit was SVN r26071.
 2012-02-29 16:56:00 +00:00
Jeff Squyres
81dc6a11ee Fix typo in copyright notice, found by Paul Hargrove 
This commit was SVN r26070.
 2012-02-29 02:02:54 +00:00
Ralph Castain
3d718863a8 Fix typo - thanks Pascal 
This commit was SVN r26064.
 2012-02-28 14:33:55 +00:00
Ralph Castain
bc5886707f Document the mpirun exit status behavior 
This commit was SVN r26009.
 2012-02-22 23:47:00 +00:00
Ralph Castain
a83da303c5 When using PMI, we know the ranks that share our node and their relative local/node ranks. Save that info in the pidmap array so that BTLs that require early knowledge of local ranks can access it. 
This commit was SVN r25992.
 2012-02-21 16:43:17 +00:00
Jeff Squyres
b6a90434e4 Fix some include file header ordering issues for some BSDs, suggested 
by Paul Hargrove.

This commit was SVN r25984.
 2012-02-21 13:32:14 +00:00
Ralph Castain
47c64ec837 Roll in Java bindings per telecon discussion. Man pages still under revision 
This commit was SVN r25973.
 2012-02-20 22:12:43 +00:00
Jeff Squyres
b295a01d8e Fix another configury error found by Paul Hargrove. Thanks, Paul! 
This commit was SVN r25971.
 2012-02-20 21:38:27 +00:00
Jeff Squyres
765de087ef Remove the use of == as a "test" shell operator. Thanks to Paul 
Hargrove for noticing the issue.

This commit was SVN r25964.
 2012-02-20 13:29:04 +00:00
Ralph Castain
534d70025f Cleanup the detection of process binding during mpi_init. There are several cases that need to be checked: 
1. no binding support - indicated by a negative return code from get_cpubind

2. binding supported, but not bound - the bitset returned by get_cpubind is the same as the available cpuset

3. binding supported and bound - bitset from get_cpubind is a subset of available cpuset

4. only one cpu is available - in this case, get_cpubind matches the available cpuset, but we are effectively bound

This commit was SVN r25957.
 2012-02-17 21:18:53 +00:00
Ralph Castain
10f94efbda Add binding output to test 
This commit was SVN r25955.
 2012-02-17 16:48:01 +00:00
Jeff Squyres
cdc783925e (Re-)Add oob_tcp_if_(in|ex)clude functionality to allow CIDR notation, 
just like the btl_tcp_if_(in|ex)clude MCA param.

This commit was SVN r25953.
 2012-02-17 15:38:42 +00:00
Jeff Squyres
3e22450345 Fix the oob_tcp_verbose MCA param; make it actually apply to the OOB 
TCP verbose handle (not the generic/0 handle).

This commit was SVN r25942.
 2012-02-16 22:28:11 +00:00
Ralph Castain
d7d8a8cdf7 Some cleanup of the tmpdir session directory specifications. Remove the --tmpdir option from orterun as it was confusing. Create an orte_local_tmpdir_base mca param in its place. Clarify the role of the local vs remote vs global tmpdir base params, and ensure that you don't set conflicting options. 
Remove the OMPI_PREFIX_ENV environmental variable as that was totally confusing as a way of setting a tmpdir base location.

This commit was SVN r25941.
 2012-02-16 16:10:01 +00:00
Jeff Squyres
54cf60eb4b $(RM) is not a standard macro. Just use "rm" -- every platform has it. 
This commit was SVN r25934.
 2012-02-15 19:51:59 +00:00
Jeff Squyres
ae9503db6e Remove the sentence that says that --prefix is a per-context option. 
This commit was SVN r25932.
 2012-02-15 18:31:27 +00:00
Ralph Castain
b3aabf1565 Cleanup the --without-hwloc build. Thanks to Paul Hargrove for reporting it broken. 
This commit was SVN r25931.
 2012-02-15 11:08:57 +00:00
Ralph Castain
3da1787c06 Allow there to be no default hostfile without generating an error 
This commit was SVN r25930.
 2012-02-15 04:16:05 +00:00
Ralph Castain
91977444af Silence warnings 
This commit was SVN r25929.
 2012-02-15 03:42:27 +00:00
Ralph Castain
bba6508b4b Handle the default hostfile case a little better... 
This commit was SVN r25928.
 2012-02-15 03:33:49 +00:00
Ralph Castain
a5e4dc6803 In accordance with prior releases, we are supposed to default to looking at the openmpi-default-hostfile as a default hostfile. Restore that behavior, but ignore the file if it is empty. Allow the user to ignore any MCA param setting pointing to a default hostfile by setting the param to "none" (via cmd line or whatever) - this allows them to override a setting in the system default MCA param file. 
This commit was SVN r25851.
 2012-02-01 17:40:44 +00:00
Ralph Castain
f14c4be580 Correct the ordering logic so the list gets correctly built in daemon vpid order 
This commit was SVN r25818.
 2012-01-30 16:25:07 +00:00
Shiqing Fan
bfbd3c67a5 Add a windows file into the tarball. 
This commit was SVN r25811.
 2012-01-29 10:12:02 +00:00
Ralph Castain
a0edae52f2 Ensure the wrapper flags get entered in the right order, with -lpmi coming before the alps util libs 
This commit was SVN r25809.
 2012-01-27 20:56:21 +00:00
Ralph Castain
3f31feee6f Handle the case where a user's rankfile specifies only cpus, and not socket:cpu pairs. 
This commit was SVN r25803.
 2012-01-27 12:21:45 +00:00
Ralph Castain
61ac2bb11b If no session directories are being created, then we cannot create the debugger attachment fifo - so don't complain about it. 
This commit was SVN r25802.
 2012-01-27 04:05:23 +00:00
Ralph Castain
07f3a91075 Okay, get srun to play nice. Problem was that everything worked fine so long as the user did "salloc" with an argument requesting a specific number of nodes. However, if the user specified instead a number of processes, then we launched that number of daemons - resulting in multiple daemons/node. Not good. 
So force things to behave correctly either way.

This commit was SVN r25792.
 2012-01-26 19:58:57 +00:00
Ralph Castain
ef94e606c7 Add some debug 
This commit was SVN r25791.
 2012-01-26 19:23:32 +00:00
Ralph Castain
1449b27e9f Ensure that slurm only launches one orted/node, regardless of how the allocation was obtained. 
This commit was SVN r25790.
 2012-01-26 19:23:15 +00:00
Jeff Squyres
64165ce758 r25775 removed the .windows from this directory, but left it in the 
Makefile.am. 

This commit was SVN r25782.

The following SVN revision numbers were found above:
  r25775 --> open-mpi/ompi@2c9a4beffd
 2012-01-26 10:45:06 +00:00
Jeff Squyres
3751495443 Add missing arguments for the new DYLD_LIBRARY_PATH stuff. 
This commit was SVN r25780.
 2012-01-26 00:35:48 +00:00
Ralph Castain
079e4d9156 Per George's comment, just duplicate the lib path envars to provide both Linux and Mac compatible values 
This commit was SVN r25776.
 2012-01-25 14:37:36 +00:00
Shiqing Fan
2c9a4beffd Add and remove a few components for windows build. 
This commit was SVN r25775.
 2012-01-25 09:01:27 +00:00
Ralph Castain
6db8c56cd4 Add local and node ranks to debugger daemon procs so the odls properly launches them 
This commit was SVN r25774.
 2012-01-25 03:17:10 +00:00
Ralph Castain
8b115754e6 Fix typo 
This commit was SVN r25763.
 2012-01-21 23:50:39 +00:00
Ralph Castain
469e40ace2 Expand the coverage a little when looking at remote shells for rsh. Prior patch (r25758) works only if both ends of the rsh/ssh connection are Mac. What we really want is to use the Mac version of ld_library_path when the remote end is Mac, regardless of the OS where mpirun is executing. So add a test for system type to the remote_shell test, and set the ld_library_path name to match the remote system type. 
This commit was SVN r25762.

The following SVN revision numbers were found above:
  r25758 --> open-mpi/ompi@1afb77e603
 2012-01-21 23:48:42 +00:00
Ralph Castain
1afb77e603 Mac requires setting DYLD_LIBRARY_PATH instead of the Linux standard LD_LIBRARY_PATH, so ensure we set that when using rsh to launch in Mac environments. 
Thanks to Teng Lin for the patch!

This commit was SVN r25758.
 2012-01-20 19:14:32 +00:00
Ralph Castain
be3dfb6a1a Ensure that we only add -lpmi once to the wrapper compilers, no matter how many components might use it. 
This commit was SVN r25753.
 2012-01-20 04:56:38 +00:00
Ralph Castain
d643882f89 Cleanup the alps configure logic so we only add the pmi support libs once 
This commit was SVN r25747.
 2012-01-19 22:10:03 +00:00
Ralph Castain
d7fe1615b6 Add missing dollar sign on variable 
This commit was SVN r25745.
 2012-01-19 20:45:22 +00:00
Ralph Castain
0d20f745e2 Remove stale function def 
This commit was SVN r25744.
 2012-01-19 20:40:48 +00:00
Nathan Hjelm
6d0e7a0a0e don't enable ess/alps unless cnos is available 
This commit was SVN r25743.
 2012-01-19 19:36:00 +00:00
Ralph Castain
bf09133631 Correctly track the number of debugger daemons being spawned 
This commit was SVN r25741.
 2012-01-19 18:17:07 +00:00
Ralph Castain
9d556e2f17 Allow daemons to use PMI to get their name where PMI support is available while using the standard grpcomm and other capabilities. Remove the GNI code from the alps ess component as that component should only be for alps/cnos installations. 
This commit was SVN r25737.
 2012-01-18 20:56:53 +00:00
Ralph Castain
6235a355de Correctly handle co-spawning of daemons when attaching to a running job. We cannot use the general process mappers as we only want debugger daemons spawned on nodes where application procs already exist. So custom build the map for the debugger daemon job, and have the plm just launch that job without doing its usual vm-spawn step. 
This commit was SVN r25736.
 2012-01-18 00:19:49 +00:00
Ralph Castain
11a37d3978 Fix the default 
This commit was SVN r25733.
 2012-01-17 21:09:27 +00:00
Ralph Castain
12d163293b Yeah, I know it's the middle of the afternoon. I'm bound to forget and commit this in with something else if I don't. Per request from LANL, if PMI support is requested on an ALPS machine, add a couple of libs in the right ordering so that static builds will work correctly. 
This commit was SVN r25732.
 2012-01-17 20:41:50 +00:00
Ralph Castain
fd0d9f73c6 Make preload_binaries an MCA param so it can be set in the default MCA parameters for a system 
This commit was SVN r25728.
 2012-01-17 17:16:05 +00:00
Shiqing Fan
f57f873404 Disable the debugger support for Windows. 
This commit was SVN r25725.
 2012-01-17 16:21:33 +00:00
Nathan Hjelm
a2437feba7 removed debug message 
This commit was SVN r25722.
 2012-01-12 20:23:59 +00:00
Nathan Hjelm
5ab1674138 fixed de bruijn copyrights 
This commit was SVN r25720.
 2012-01-12 17:18:08 +00:00
Nathan Hjelm
c57f18999d added Debruijn routed component 
This commit was SVN r25717.
 2012-01-12 17:11:03 +00:00
Ralph Castain
477582abef Grrrr....fix ALL the cases where the membind warning occurs. 
This commit was SVN r25715.
 2012-01-11 23:51:18 +00:00
Ralph Castain
ce7ddd0e10 Create the debugger attach fifo unless the user requests that we periodically poll insteaad. 
This commit was SVN r25714.
 2012-01-11 19:44:22 +00:00
Ralph Castain
bf103de66c My apologies for doing this outside of the usual time restrictions, but we need to get this in so we can make progress. 
Move the ORTE-level debugger code back into orterun and out of the ORTE library to resolve symbol conflicts.

This commit was SVN r25713.
 2012-01-11 15:53:09 +00:00
Ralph Castain
167ad944c4 Surprise, surprise - hwloc treats memory binding as at the thread, not process, level. Thus, hwloc always sets the membind proc-level support flag to false, and indicates actual memory binding support via the thread-level flag. So...just to be safe, test -both- flags and issue the "no support" warning ONLY if both are false. 
This commit was SVN r25709.
 2012-01-11 01:12:57 +00:00
Shiqing Fan
e3dfc49ced make correct use of the newly updated structures in the Windows module. 
This commit was SVN r25699.
 2012-01-09 11:08:34 +00:00
Ralph Castain
840841bb8f Missed a couple 
This commit was SVN r25686.
 2011-12-29 23:30:19 +00:00
Ralph Castain
af7fb68cfb If we forward envars in rsh, then we have to be very careful about both duplicate entries and disallowed characters on the cmd line. To aid with detecting duplicates, make all cmd line options be given in their mca variant. Check anything we might add for semi-colons and protect those values with quotes. 
This commit was SVN r25685.
 2011-12-29 23:25:25 +00:00
Jeff Squyres
a4c8bb27fa Pull in the MPIR_Breakpoint symbol via a dummy function in 
debuggers_base_fns.c: orte_debugger_base_pull_mpir_breakpoint().

This commit was SVN r25660.
 2011-12-15 18:39:34 +00:00