than can be used (e.g., number of on-node peers), that no additional
room is set aside for those FIFOs that will never be created. This
makes it easier to have dedicated FIFOs: just set btl_sm_num_fifos
to be very large rather than setting it to be the local number of
procs. In practice, we ask for extra headroom anyhow, so this change
generally won't matter.
This commit was SVN r22291.
- removed tools/opari/doc/lacsi01.ps.gz which is equivalent to tools/opari/doc/lacsi01.pdf
- corrected svn:mime-type of tools/opari/doc/opari-logo-100.gif
This commit was SVN r22267.
friends also receive &argc and &argv (George asked Jeff to Ralph to
review before committing). The thought is that passing argv and argc
to opal/orte_init be useful to other projects outside of OMPI that are
using OPAL and/or ORTE (especially in conjunction with some other
bootstrapping code where it is helpful to modify argv). It's such a
small thing that it's easy to apply here to make others' lives a
little easier.
Ask George for more details; I'm just the messenger. :-)
Judging by the copyrights on this patch, it's been around for a
while. :-)
This commit was SVN r22260.
we should have also relaxed the error checking for MPI_GRAPH_CREATE.
Thanks to David Singleton for pointing this out.
This commit was SVN r22251.
The following SVN revision numbers were found above:
r21816 --> open-mpi/ompi@b8332ea2b2
other request-using frameworks.
- Rather than having mpi/c/* functions allocate requests explicitly,
pass the MPI_Request* down to the I/O component and have it
perform the allocation.
- While the I/O base provides a base request which can be used,
it is not required and all request management occurs within
the component.
- Push progress management into the component, rather than having it
happen in the base. Progress functions are now easily registered,
and not all (ie, the one existing) components use progress functions
in any rational way.
ROMIO switched to generalized requests instead of MPIO_Requests many
moons ago, and Open MPI now uses ROMIO's generalized requests, so there
is no reason to wrap those requests (which are OMPI requests) in another
level of request.
Now the file function passes the MPI_Request* to the ROMIO component,
which passes it to the underlying ROMIO function, which calls
MPI_Grequest_start to create an OMPI request, which is what gets set
as the request to the user. Much cleaner.
This patch has two motivations. One, a whole heck of a lot of code
just got removed, and request handling is now much cleaner for I/O
components. Two, by adding support for Argonne's proposed generalized
request extensions, we can allow ROMIO to provide async I/O through
generalized requests, which we couldn't rationally do in the old
setup due to the crazy request completion rules.
This commit was SVN r22235.
use the new Automake "silent rules" if available.
If you are using an Automake prior to v1.11, you won't see the new
silent rules -- it will automatically default back to the "verbose"
rules.
Note, too, that even with these changes, you can enable the verbose
"make all" output in one of two ways:
1. Add "V=1" to your "make" command line
{{{
shell$ make all V=1
}}}
2. Add "--disable-silent-rules" to your "configure" command line:
{{{
shell$ ./configure --disable-silent-rules ...
}}}
The one down side of using the silent rules by default is that we'll
get less diagnostic information when users send their build logs. I
think we should update the web page to request that users send build
logs of "make V=1", but I'm guessing that not everyone will do it.
Note that I did ''not'' silent-ize the libltdl build (which is a dozen
or so files in the beginning of the build) because we wholly import
libltdl at autogen time. I therefore didn't want to patch libltdl
(further) after importing it a) to remain as forward- compatible as
possible, and b) patching the imported libltdl build system might be
tricky in terms of timestamps / dependencies. So those dozen-or-so
files will still be "verbose", but the rest of the files in OMPI will
be "silent".
This commit was SVN r22189.
area, we cap the size at LONG_MAX. But we are figuring out how much
we need. So, if that amount exceeds LONG_MAX, we should return an
"out of resource" error code.
This commit was SVN r22172.
Continue the reorganization of the configure system. Move files from the main config directory to their appropriate level-specific config directories. Modify the configure system to correctly handle compiler detection, test, and setup so that all things pertaining to opal and orte are done at the lower level, with the ompi configure system only looking at mpi-specific options.
Ensure the wrapper compilers for orte and ompi only get built when appropriate. Add support for c++ to the orte wrapper compilers, both script and non-script versions.
This commit was SVN r22138.
therefore the m4 test really belongs on orte/config. Thank Terry!
Additionally, I took the opprotunity to rename the variable so that
"TOTALVIEW" is not in the name anymore (because it applies to all
variables, not just Totalview).
This commit was SVN r22134.
as simple as I or Ralph had hoped. This should be the real fix,
or very close to it. I can now see both the sensor and rmcast
information from ompi_info when configured
with --enable-monitoring --enable_multicast
This commit was SVN r22131.
The following SVN revision numbers were found above:
r22129 --> open-mpi/ompi@02ff00dfb5
XML code in the F90 tree isn't used anymore, but we might as well
update it just so that everything is consistent).
This commit was SVN r22127.
The following Trac tickets were found above:
Ticket 2067 --> https://svn.open-mpi.org/trac/ompi/ticket/2067
from "MPI_*_errhandler_fn" to "MPI_*_errhandler_function" (and their
corresponding C++ types, too). Also updated the corresponding man
pages, and marked the typedefs to the now-deprecated types as
deprecated.
This commit was SVN r22122.
The following Trac tickets were found above:
Ticket 2060 --> https://svn.open-mpi.org/trac/ompi/ticket/2060
Re-enable "./autogen.sh -no-ompi" again. If you -no-ompi, the entire OMPI
configury is skipped and the entire ompi/ subtree is not built. There's
some simple m4-isms that prune out the relevant parts.
I added ompi/config/, orte/config/, and opal/config/ directories. I moved a
bunch of m4 files from the top-level config/ dir into ompi/config/, and a few
into orte/config/.
Note that all 3 <project>/config directories have a config_files.m4 file. This
file contains the AC_CONFIG_FILES list for that project. The AC_CONFIG_FILES
call cannot be in an AC_DEFUN macro and conditionally called -- if it is
included at all, Autoconf will process it. Hence, these config_files.m4 files
don't AC_DEFUN -- they just have AC_CONFIG_FILES. m4_ifdef() is used to
conditionally include the files or not.
I moved a bunch of obvious OMPI-only m4 files from config/ to ompi/config/,
but I'm sure that there's more that could go. A ticket will be filed with
thoughts on future work in this area.
This commit was SVN r22113.
This commit does a bunch of things:
* Address all remaining code review items from CMR #2023:
* Defer mmap setup to be lazy; only set it up the first time we
invoke a collective. In this way, we don't penalize apps that
make lots of communicators but don't invoke collectives on them
(per #2027).
* Remove the extra assignments of mca_coll_sm_one (fixing a
convertor count setup that was the real problem).
* Remove another extra/unnecessary assignment.
* Increase libevent polling frequency when using the RML to
bootstrap mmap'ed memory.
* Fix a minor procs-related memory leak in btl_sm.
* Commit a datatype fix that George and I discovered along the way to
fixing the coll sm.
* Improve error messages when mmap fails, potentially trying to
de-alloc any allocated memory when that happens.
* Fix a previously-unnoticed confusion between extent and true_extent
in coll sm reduce.
This commit was SVN r22049.
The following Trac tickets were found above:
Ticket 2023 --> https://svn.open-mpi.org/trac/ompi/ticket/2023
(yay cisco webex!). Make sure we only go up to OPAL max datatype, not
OMPI max datatype.
This commit was SVN r22016.
The following Trac tickets were found above:
Ticket 2028 --> https://svn.open-mpi.org/trac/ompi/ticket/2028
shmem progress (or the Windows equiv). Instead, poll hard on the
condition, but periocially call opal_progress(). This allows
badly-formed apps (e.g., the ibm test communicator/bsend_free) to
actually complete.
To be clear, there are far too many apps out there that assume that
MPI collectives will actually progress the rest of MPI. I don't like
putting in a feature to enable broken apps, but I have a dim
recollection of this issue coming up before (apps "hanging" when
testing the sm coll because they assumed that calling collectives
would trigger other MPI progress). Rather than have people claim that
OMPI is broken, I prefer to put in this "workaround". :-(
Indeed, the bsend_free test ''may'' be coded that way for exactly that
reason...? I don't remember offhand...
This commit was SVN r21984.
This commit fixes the ft_event logic so that it uses the normal destroy funcitonality instead of the workaround with the component that was previously there. All and all it made for cleaner code, which is always good.
If r21967 moves to v1.3, this patch will need to be moved as well.
This commit was SVN r21972.
The following SVN revision numbers were found above:
r21967 --> open-mpi/ompi@533633b8cb
Before this, we would restore the topmost old session directory. This commit makes sure that we remove it when we are done with it.
This commit was SVN r21971.
in the v1.2 series the cid's could never go above the max. allowed for a
particular pml. Because of that, pml_add_comm never checked for the cid, and
in fact pml_add_comm was called in comm_set, which is *before* we knew the
cid.
in the v1.3 series (and trunk) we check now the cid to detect overflow, and
because of that pml_add_comm has been moved *after* the cid allocation
routine, namely into the comm_activate routine.
in the v1.2 series, the comm_activate contained a synchronization step of the
old communicator in order to prevent incoming fragments on the new
communicator, with the main problem being that the allreduce in the
communicator allocation finished at different times on different processes,
and thus, this scenario could and did really occur.
in the v1.3 series, the comm_activate does not contain the synchronization
step anymore, since we introduced the new queue for fragments with unknown
cid. The problem is however, that whether a fragment is known or not is
decided by using ompi_comm_lookup(), which will return something useful as
soon as the cid allocation finished, even before pml_add_comm has been
called. So there is a small time gap where we will not post a message into
queue for unknown cid's, but we can also not look up the process structure
belonging to the rank in that comm ( that is in pml_ob1_match_recv_frag or
something like that).
The current fix reintroduces the synchronization step in comm_activate, and
ensures that no fragment can be received for a new communicator before the
synchronization occurs , and thus comm_nextcid() and pml_add_comm has been
called. It seems to be the safest and easiest way for now. Welcome back, v1.2.
This commit was SVN r21970.
* Various cosmetic/style updates in the btl sm
* Clean up concept of mpool module (I think that code was written way
back when the concept of "modules" was fuzzy)
* Bring over some old fixes from the /tmp/timattox-sm-coll/ tree to
fix potential segv's when mmap'ed regions were at different
addresses in different processes (thanks Tim!).
* Change sm coll to no longer use mpool as its main source of shmem;
rather, just mmap its own segment (because it's fixed size --
there was nothing to be gained by using mpool; shedding the use of
mpool saved a lot of complexity in the sm coll setup). This
effectively made Tim's fixes moot (because now everything is an
offset into the mmap that is computed locally; there are no global
pointers). :-)
* Slightly updated common/sm to allow making mmap's for a specific
set of procs (vs. ''all'' procs in the process). This potentially
allows for same-host-inter-proc mmaps -- yay!
* Fixed many, many things in the coll sm (particularly in reduce):
* Fixed handling of MPI_IN_PLACE in reduce and allreduce
* Fixed handling of non-contiguous datatypes in reduce
* Changed the order of reductions to go from process (n-1)'s data
to process 0's data, because that's how all other OMPI coll
components work
* Fixed lots of usage of ddt functions
* When using a non-contiguous datatype, if the root process is not
(n-1), now we used a 2nd convertor to copy from shmem to the rbuf
(saves a memory copy vs. what was done before)
* Lots and lots of little cleanups, clarifications, and minor
optimizations (although still more could be done -- e.g., I think
the use of write memory barriers is fairly sub-optimal; they
could be ganged together at the root, for example)
I'm marking this as "fixes trac:1988" and closing the ticket; if something
is still broken, we can re-open the ticket.
This commit was SVN r21967.
The following Trac tickets were found above:
Ticket 1988 --> https://svn.open-mpi.org/trac/ompi/ticket/1988
As noted in http://www.open-mpi.org/community/lists/devel/2009/08/6741.php,
we do not correctly free a dupped predefined datatype.
The fix is a bit more involving. See ticket for details.
Tested with ibm tests and mpi_test_suite (though there's two "old" failures
zero5.c and zero6.c)
Thanks to Lisandro Dalcin for bringing this up.
This commit was SVN r21929.
The following Trac tickets were found above:
Ticket 2014 --> https://svn.open-mpi.org/trac/ompi/ticket/2014
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
http://www.open-mpi.org/community/lists/devel/2009/08/6618.php
lower the default priority of PML/cm to allow _defined_ behaviour
for systems, where both MTLs and BTLs are available (Portals and MX).
Keep the previous behaviour of favoring in case of PSM.
Still, the user may select --mca pml cm for apps where applicable.
This commit was SVN r21834.
now are able to use the dynamic rules. Moreover, these rules are loaded only once,
and stored at the component level. All communicators are able to use these rules
(not only MPI_COMM_WORLD as until now).
A lot of minor corrections, memory management issues and reduction in the amount
of memory used by the tuned collectives.
This commit was SVN r21825.
BTL/sm. This static variable needlessly ends up in the so.-file.
init_maffinity is called once from sm_btl_first_time_init.
Checked with lennyve, static here is not necessary.
This commit was SVN r21813.
The following SVN revision numbers were found above:
r18658 --> open-mpi/ompi@f4811d6c4d
- add a cmake module for searching libltdl libraries and headers
- a configure option to enable DSO build, default OFF.
- update a few source files for including correct header
and loading correct mca libraries path/suffix.
This commit was SVN r21804.
support for _Complex is disabled until we figure out the correct
black magic. So instead of using this nice C99 feature, we use the
a strcture with a double type, the same approach that worked pretty
well for the last couple of years.
Switching from one mode to the other is done using the
OPAL_USE_[FLOAT|DOUBLE|LONG_DOUBLE]__COMPLEX macros defined in
opal_datatype_internal.h at line 442.
This commit was SVN r21800.
(aka w/o --mca pml cm), make sure PtlEQGet will actually work
on ompi_mtl_portals.ptl_eq_h -- do so without adding code to
ompi_mtl_portals_progress.
Otherwise we abort() with
[nid09979:32503] ompi_mtl_portals_finalize: Going to call ompi_mtl_portals_progress
[nid09979:32503] Error returned from PtlEQGet. Error code - 14
[nid09979:32502] Signal: Aborted (6)
[nid09979:32502] Signal code: (-6)
This commit was SVN r21761.
* No need for OPAL_SIZEOF_BOOL and OPAL_SIZEOF_INT in comm_inln.h --
just use sizeof()
* Fix logic in ompi_setup_cxx.m4 to account for the case where we
''do'' have a C++ compiler (duh!!)
* Fix spelling error in a shell variable that ended up making a
bad/empty #define
This should bring the trunk back to being functional. Sorry for the
interruption, folks...
This commit was SVN r21758.
The following SVN revision numbers were found above:
r21755 --> open-mpi/ompi@90d6491737
This however may not be what we finally want to support MPI_COMPLEX:
As with a possible difference of C99 _Bool and C++ Bool, we may want
to have a base opal_datatype_complex (as was initially in the
ompi-ddt branch), instead of assuming a struct of
opal_datatype_float... Think of stricter alignment.
The configure checks for (float/double/long double) complex have
been added with the ompi-ddt branch.
This commit was SVN r21756.
C++ compiler in configure. If we have a C++ compiler, then the MPI
C++ bindings are built by default. If we don't have a C++ compiler,
then the MPI C++ bindings are not built by default.
--enable-mpi-cxx will now force an error if there is no C++ compiler
available. --disable-mpi-cxx (or the lack of a C++ compiler) will now
disable many of the C++ compiler checks in configure.
Note that there are a few items to clean up regarding the difference
between C's _Bool type and C++'s bool type. Right now, we assume that
they are the same. But they aren't, and they shouldn't be treated as
such. This cleanup will be forced in MPI-2.2 with the introduction of
the MPI_C_BOOL MPI datatype.
This commit was SVN r21755.
variables that are not initialized and are declared in a file that
doesn't export any globally visible function are marked as
non-initialized constants, i.e. uninitialized common symbols. For some
obscure reasons, they get removed from the object files on Mac OS X.
So far I found two solution to this problem. One require the addition
of "-c" to the linker command, the second one (corresponding to this
patch) force them to became a common initialized symbol.
This commit was SVN r21739.
note in VERSION file.
NOTE: the versions will ''always'' be 0:0:0 on the SVN trunk and
developer branches. They will only have meaningful values (starting
with 0:0:0 in 1.3.4) on release branches. Only RM's will modify these
values immediately preceeding a release.
This commit was SVN r21729.
communicators twice, once in dpm.disconnect_wait, and once in
comm_free. The second location seems to be the right place for that (since a
communicator could be freed, and not disconnected), remove the instance in
disconnect_wait.
- add some error messages in case something goes wrong.
This commit was SVN r21720.
Add ability to store the RM's jobid string to tag the notifier message so that the sys admin knows what job had the problem.
This commit was SVN r21687.
- reduced list of supported MPI implementations to Open MPI
(changed meaning of configure option '--with-openmpi': this option indicates an Open MPI internal build)
- updated version number of integrated VT to 5.4.10
This commit was SVN r21679.
Remove all architecture references from ORTE and put them back in the modex using modex_send/recv calls.
Hetero operations are now fully supported again. Comm_spawn now works up to the point where it segfaults due to an error in the CID code - which now allows Edgar to dig further! :-)
This commit was SVN r21655.
- Add a CMake macro for checking OPAL_MAX_XXX values, re-written from OPAL_WITH_OPTION_MIN_MAX_VALUE m4 function.
- Definition prefix changes and additional datatype alignments checking.
- Finish the datatype splitting on Windows too. :-)
This commit was SVN r21649.
The following SVN revision numbers were found above:
r21641 --> open-mpi/ompi@6c5532072a
r21642 --> open-mpi/ompi@c971c09eb6
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
point, the event engine has been shut down until btl finalization is
done, so opal_progress in the wait loop is not an option - we have
to drain from inside the btl.
Clean up the looping structure for the finalize routine
Update copyrights.
This commit was SVN r21620.
different processes have requested different levels of thread support. This
verification is restricted to MPI_COMM_WORLD.
In case one ore more processes have requested support for MPI_THREAD_MULTIPLE,
the cid selection algorithm will fall back to the original, thread safe
approach. Else, it uses the block-algorithm.
For dynamic communicators, we always fall back now to the original algorithm.
This has been tested for homogeneous and heterogeneous settings for
MCW. However, I could not test yet the dynamic comm scenario for technical
reasons, and that's why I don't close yet ticket 1949.
This commit was SVN r21613.
IPv4 and IPv6) is outside the legal boundaries. This fixes trac:1869.
This commit was SVN r21612.
The following Trac tickets were found above:
Ticket 1869 --> https://svn.open-mpi.org/trac/ompi/ticket/1869
