Aleksej Saushev.
Dont use bash or bashism in shell scripts
We should use Posix' setpgid(0,0), which is equivalent to setpgrp().
This commit was SVN r22829.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
- skip test for libdl on BlueGene? and CrayXT platforms (particularly on CrayXT this library can be linked but it isn't suitable)
- set cache variables for functions 'PMPI_Win_test', 'PMPI_Win_lock', 'PMPI_Win_unlock', and 'MPI_Register_datarep', if VT is configuring for Open MPI
- added test for pthread functions 'pthread_condattr_<set|get>pshared' and 'pthread_mutexattr_<set|get>pshared', because they are not available on some platforms
VT fixes:
- cut 'nm' collected symbol names at '??'
- vtunify:
- fixed unsafe usage of some strncpy's
- fixed potential segmentation fault in vtunify-mpi which might occur on 32bit platforms using MPICH2
OTF general:
- updated date in copyright header of each source file
OTF fixes:
- minor code cleanups (indentation, nicer error messages, more correct free's)
- otfaux:
- fix to place final statistics after the very last record instead of right before
- changed fatal error to a warning when a file is closed twice (or unexpectedly)
This commit was SVN r22820.
previously an orte_std_cntr_t, which is int32_t).
Comparison with < 0 don't make any sense, here.
This commit was SVN r22799.
The following SVN revision numbers were found above:
r22727 --> open-mpi/ompi@2541aa98ab
Short version: there is a bug in OS X/Snow Leopard, but there is also
a bug in Open MPI. Fixing the bug in Open MPI is both trivial (a
1-line change) and avoids the bug in OS X. We'll file an OS X bug
report upstream with Apple, but it should no longer affect us here in
OMPI.
Fixes trac:2039.
More details:
Some background first:
1. IPv4 sockets can only accept incoming IPv4 connections. However,
IPv6 sockets can be configured to accept ''only'' incoming IPv6
connection, or ''both'' incoming IPv4 and IPv6 connections. An
IPv6 socket attribute sets which listening behavior is used.
1. IPv4 and IPv6 have different port namespaces. Hence, it is
permissable to bind a v4 socket to port X ''and'' also bind a v6
socket to that same port X on the same interface (assuming that
the v6 socket is only accepting incoming v6 connections).
Incoming v4 connections to port X on the interface should get
matched to the listening v4 socket; incoming v6 connections should
get matched to the listening v6 socket.
1. When v6 sockets accept ''both'' incoming v4 and v6 connections, it
should claim port X in both namespaces.
1. Linux's default behavior is to only allow one listening socket to
be bound to a given port (i.e., ''either'' a v6 or v4 socket to be
bound to a single port X -- not both). A v6 socket can listen for
both v4 and v6 incoming connections on that port, but still --
only one socket will be bound to that port.
1. Snow Leopard's default behavior is to share ports -- i.e., let
both a v4 and a v6 listening socket to be bound to port X
(assuming that the v6 socket is only accepting incoming v6
connections).
The TCP BTL creates a listening socket for each address family.
Hence, it creates a v4 listening socket on INADDR_ANY and a v6
listening socket on the v6 equivalent of INADDR_ANY. OMPI then
iteratively tries to find ports to listen on within the range of
[mca_btl_tcp_port_min, mca_btl_tcp_port_min + mca_btl_tcp_port_range).
On Linux, the v4 socket will be bound to port X and the v6 socket will
likely be bound to port Y (where X != Y). On Snow Leopard, the v4
socket will be bound to port X and the v6 socket may ''also'' be bound
to port X. Since the namespaces are separate, this shouldn't be a
problem.
However, Open MPI was accidentally setting the v6 listening behavior
to accept ''both'' v4 and v6 incoming connections. This is a trivial
thing to fix -- change a 0 to a 1 in the code. On Linux, this issue
didn't matter because the v4 and v6 sockets were on different ports.
So even though the v6 socket ''would'' have accepted incoming v4
connections, that never happened because OMPI would direct v4
connections to the v4 port.
But on Snow Leopard, the v4 and v6 listening ports could end up
sharing the same port number. As mentioned above, this ''shouldn't''
have been a problem, but it looks like Snow Leopard has the following
bugs:
* If a v4 socket is already bound to port X, we're pretty sure that a
v6 socket with the "accept both v4 and v6 incoming connections"
listening behavior should not be able to claim port X (because
there's already a v4 socket listening on X). However, Snow Leopard
would allow binding a v4 socket to port X, and then allow a v6
socket configured to allow incoming v4 and v6 connections to
''also'' be bound to port X.
* After binding the v6 socket to port X, Snow Leopard then lets
''another'' v4 socket ''also'' get bound to port X. Hence, there's
now '''three''' sockets all listening on port X.
This obviously led to mis-matched TCP connections, and things went
downhill from there.
That being said, Snow Leopard doesn't exhibit this behavior if v6
sockets only allow incoming v6 connections. And technically, that is
exactly the behavior we want (we want v6 sockets to only accept
incoming v6 connections). So if we just change the flag to make our
v6 listening socket us this behavior, the problem on OS X goes away.
That's what this commit does -- it changes a 0 to a 1, indicating
"only let this v6 socket allow incoming v6 connections."
That was simple, wasn't it?
This commit was SVN r22788.
The following Trac tickets were found above:
Ticket 2039 --> https://svn.open-mpi.org/trac/ompi/ticket/2039
1. The code that looks at btl_tcp_if_exclude before doing a
modex_send uses strcmp rather than strncmp. That means that
"lo0" gets sent even though "lo" is excluded.
2. The code that determines whether a particular local TCP
interface can connect to a particular remote interface doesn't
check for loopback interfaces. With this fix, users can now
enable "lo" and be assured that it will only be used for intra-
node communication.
This commit was SVN r22762.
btl_openib_ip.*. The routines in these files are not specific to
iwarp -- they are specific to IP interfaces used with IBV devices
(even IB or IBoE/RoCEE/whatever devices).
This commit was SVN r22718.
issues with iwarp.c. These fixes are needed for IBoE / ROCEE /
whateveritscalledtoday. I added a few minor changes to his base
patch.
This commit was SVN r22717.
Modify the orte configure options to specify --enable-multicast such that it directs components to build or not instead of littering the code base with #if's. Remove those #if's where they used to occur.
Add a new grpcomm "mcast" module to support multicast operations. Still some work required to properly perform daemon collectives for comm_spawn operations. New module only builds when --enable-multicast is provided, and when specifically selected.
This commit was SVN r22709.
bug: libmpi_f90 had libmpi.la in its LIBADD instead of libmpi_f77.la.
Fixes trac:2244.
This commit was SVN r22704.
The following Trac tickets were found above:
Ticket 2244 --> https://svn.open-mpi.org/trac/ompi/ticket/2244
mca_osc_rdma_component.c_modules in ompi_osc_rdma_windx_to_module
Fixes case where there is unprotected access to
mca_osc_rdma_component.c_modules in ompi_osc_rdma_windx_to_module
This commit was SVN r22700.
discussed extensively. See
https://svn.open-mpi.org/trac/ompi/ticket/2092 and the RFC thread
http://www.open-mpi.org/community/lists/devel/2010/02/7447.php.
Specifically:
* Create LT convenience libraries for OPAL and ORTE if the layer
above them is being created (use the already-defined
AM_CONDITIONALs to know if the project above us is being built).
* ORTE slurps in the LT convenience library for OPAL; OMPI slurps in
the LT convenience library for ORTE.
* Wrapper compilers now only -l one library (e.g., ortecc only does
-lopen-ret, and mpicc only does -lmpi).
This commit was SVN r22691.
INTERNAL to EXTRA_RETAIN, because not all "internal" communicators
have this flag set (only internal communicators with CIDs less than
their parent). Hence, what this flag ''really'' means is that there
was an extra RETAIN performed on it. So name the flag just that --
EXTRA_RETAIN -- indicating that an extra RETAIN has occurred.
This commit was SVN r22690.
The following SVN revision numbers were found above:
r22671 --> open-mpi/ompi@61dee816db
can occur ( fixes trac:2111 ).
Should not deregister memory with the rcache lock held otherwise a deadlock can occur as the lower
level infiniband libraries can free memory ( fixes trac:2110 )
cmr:v1.4
This commit was SVN r22683.
The following Trac tickets were found above:
Ticket 2110 --> https://svn.open-mpi.org/trac/ompi/ticket/2110
Ticket 2111 --> https://svn.open-mpi.org/trac/ompi/ticket/2111
as this can result in a low level free of memory which
can require the rcache lock resulting in a deadlock
This fixes trac:2107
cmr:v1.4
This commit was SVN r22679.
The following Trac tickets were found above:
Ticket 2107 --> https://svn.open-mpi.org/trac/ompi/ticket/2107
when protecting the no_wqe_pending_frags list.
fixes trac:2118 add cmr:v1.4
This commit was SVN r22678.
The following Trac tickets were found above:
Ticket 2118 --> https://svn.open-mpi.org/trac/ompi/ticket/2118
Also includes some minor copytight header additions that were missed in previous checkins
fixes trac:2101 added cmr:v1.4
This commit was SVN r22676.
The following Trac tickets were found above:
Ticket 2101 --> https://svn.open-mpi.org/trac/ompi/ticket/2101
communicator that we created has a lower CID than the parent comm. This can
happen when using the hierarch collective communication module or for
inter-communicators (since we make a duplicate of the original communicator).
This is not a problem as long as the user calls MPI_Comm_free on the parent
communicator. However, if the communicators are not freed by the user but
released by Open MPI in MPI_Finalize, we walk through the list of still
available communicators and free them one by one. Thus, local_comm is freed
before the actual inter-communicator. However, the local_comm pointer in the
inter communicator will still contain the 'previous' address of the local_comm
and thus this will lead to a segmentation violation. In order to prevent that
from happening, we increase the reference counter local_comm by one if its CID
is lower than the parent. We cannot increase however its reference counter if
the CID of local_comm is larger than the CID of the inter communicators, since
a regular MPI_Comm_free would leave in that the case the local_comm hanging
around and thus we would not recycle CID's properly, which was the reason and
the cause for this trouble.
This commit fixes tickets 2094 and 2166. Note however, that I want to close
them manually, since a slightly different patch is required for the 1.4
series. This commit will have to be applied for the 1.5 series. And I will
need a volunteer to review it.
This commit was SVN r22671.
parameter (I just discovered while researching for v1.4 that v1.4 has
effectively this same function definition: it just always returns
true!).
This commit was SVN r22642.
This commit adds a lengthy comment in ompi_datatype.h that explains
why a one-sided datatype check was removed. The short version is that
we do have to allow some datatypes that may be unwise to use (e.g.,
"h" types of datatypes that have offsets in bytes -- MPI says it's ok
to use these), and our DDT engine can't currently detect datatypes
with absolute offsets, which MPI says it's ''not'' ok to use with
one-sided operations. Hence, we don't check for some datatypes that
are invalid to use with one-sided operations, and erroneous programs
may crash and burn. Life is hard.
The main point of this commit is that we now do allow datatypes for
one-sided operations that are supposed to be allowed.
This commit was SVN r22641.
The following Trac tickets were found above:
Ticket 2233 --> https://svn.open-mpi.org/trac/ompi/ticket/2233
other process should ignore this value. Thanks to Michael Hofmann
for investigating this issue.
This commit closes trac:2268.
This commit was SVN r22639.
The following Trac tickets were found above:
Ticket 2268 --> https://svn.open-mpi.org/trac/ompi/ticket/2268
- Updated date in copyright header of each source file
VT configure fixes:
- fixed configure's version detection for PAPI to support version 4.x
- added configure tests to detect Bull MPICH2
VT new features:
- added support for "re-locate" an existing VampirTrace? installation without re-build it from source (fixes OMPI's ticket #1990)
- added support for tracing functions in shared libraries instrumented by the GNU, Intel, Pathscale, ot PGI 9 compiler
- added support for PAPI-C counters which belong to different components
- extended usability of environment variable VT_METRICS for PAPI counters to specifiy whether a counter provides increasing or absolute values
This commit was SVN r22637.
If file does not exist, check the directory it lives in...
Maybe used by caller, trying to open mmap() on NFS, Lustre or
Panasas (thanks Sam).
For now, this is used to warn about the usage of mmap on such FS.
Please note, that Ralph mentioned the orte_no_session_dir parameter.
The help message includes a reference to this.
Tested on NFS and Lustre on Linux on
smoky: mpirun --mca orte_tmpdir_base $HOME/tmp -np 2 ./mpi_stub
jaguar: mpirun ... --mca orte_tmpdir_base /tmp/work/$USER ...
Fixes trac:1354
This should cmr:v1.5 once it has soaked and is shown to work on
Solaris
This commit was SVN r22604.
The following Trac tickets were found above:
Ticket 1354 --> https://svn.open-mpi.org/trac/ompi/ticket/1354
long-standing bugs (see trac ticket list below). They're currently
somewhat obscure bugs, but are becoming much more relevant in a world
where OpenFabrics devices fail and you replace them with a newer model
(i.e., the cluster is homogeneous... ''except'' for where you had to
replace one or two OpenFabrics devices, and the same model is no
longer available).
This commit includes a '''lengthy''' comment (that we spent a lot of
time writing!) about what exactly it does and does not do. The
previous code was rather short and '''incredibly''' subtle. The new
code is slightly longer, but is both much more explicit and much more
painstakingly documented.
This commit fixes multiple trac tickets. The real one that we fix is
#1707; the others are fixed as a side-effect. In short: fixing #1707
prevents Bad Things from happening later in the startup sequence.
Fixes trac:1707, #2164, #1574.
cmr:v1.4.2:reviewer=pasha
cmr:v1.5:reviewer=pasha
This commit was SVN r22592.
The following Trac tickets were found above:
Ticket 1707 --> https://svn.open-mpi.org/trac/ompi/ticket/1707
Add a ''map_bynode'' info key to determine if the job to be started by comm_spawn* should be mapped by node or by slot. Default is to map according to the default policy set when the parent job was started.
cmr:v1.5.1
This commit was SVN r22564.
* Don't build the pstat component if all defines needed aren't there.
* Update platform file to work better
* Work around two places that depended on modex being operational
This commit was SVN r22536.
after the compiler argv tokens.
Not closing #2201 yet; there's still discussion on that ticket about
whether we want to do more or not.
Refs trac:2201
cmr:v1.4.2
cmr:v1.5
This commit was SVN r22513.
The following Trac tickets were found above:
Ticket 2201 --> https://svn.open-mpi.org/trac/ompi/ticket/2201
- patch libtool.m4 to fix detection of PGI 10 C++ compiler
- patch configure to fix detection of PGI 10 Fortran compiler (pgfortran)
- checks for MPI:
- do only check Fortran interoperability if F77 compiler given
- do not enable MPI-2 I/O support for LAM/MPI
- added configure checks for PMPI_Win_<lock|unlock|test>, because in LAM-MPI these functions are missing
- checks for LIBC-I/O tracing:
- pass ldd's stderr output to /dev/null
VT source fixes:
- fixed detection of unique node id on MacOS platforms (use sysctl instead of gethostid)
- fixed yet another Coverity warning
- fixed compiler warnings on MacOS
This commit was SVN r22508.
- set configure variable 'inside_openmpi' to "no", if hidden argument '--with-openmpi-inside' not given
- added functions 'MPI_Group_range_<incl|excl>' to Fortran MPI wrappers
- updated default configure options for NECSX, BlueGene/L+P
- repaired tools/opari/doc/lacsi01.pdf
- fixed several Coverity warnings
This commit was SVN r22476.
- added support for shared libraries inside Open MPI
- hidden configure option '--with-openmpi-inside'
- do not show config titles/summary if configuring inside Open MPI
This commit was SVN r22440.
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
Special-case the before MPI_INIT / after MPI_FINALIZE error messages
so that they can be a bit more clear than the general "an error
occurred" messages that are displayed in the middle of MPI jobs.
This is not really a "bug fix", but it is helpful for usability. I
leave it up to the v1.4 RM's to decide if they want it for the 1.4
series or not.
This commit was SVN r22382.
The following Trac tickets were found above:
Ticket 2158 --> https://svn.open-mpi.org/trac/ompi/ticket/2158
