Per Jeff (this work was done on a branch of mine, so I will do the commit):
Re-enable "./autogen.sh -no-ompi" again. If you -no-ompi, the entire OMPI configury is skipped and the entire ompi/ subtree is not built. There's some simple m4-isms that prune out the relevant parts. I added ompi/config/, orte/config/, and opal/config/ directories. I moved a bunch of m4 files from the top-level config/ dir into ompi/config/, and a few into orte/config/. Note that all 3 <project>/config directories have a config_files.m4 file. This file contains the AC_CONFIG_FILES list for that project. The AC_CONFIG_FILES call cannot be in an AC_DEFUN macro and conditionally called -- if it is included at all, Autoconf will process it. Hence, these config_files.m4 files don't AC_DEFUN -- they just have AC_CONFIG_FILES. m4_ifdef() is used to conditionally include the files or not. I moved a bunch of obvious OMPI-only m4 files from config/ to ompi/config/, but I'm sure that there's more that could go. A ticket will be filed with thoughts on future work in this area. This commit was SVN r22113.
Этот коммит содержится в:
Ralph Castain
родитель
f1f156d57b
Коммит
214e26b539
32
autogen.sh
32
autogen.sh
@ -517,7 +517,14 @@ EOF
|
||||
fi
|
||||
|
||||
if test -f $topdir_file; then
|
||||
run_and_check $ompi_aclocal -I config
|
||||
flags=
|
||||
if test "$want_orte" = "1"; then
|
||||
flags="$flags -I orte/config"
|
||||
fi
|
||||
if test "$want_ompi" = "1"; then
|
||||
flags="$flags -I ompi/config"
|
||||
fi
|
||||
run_and_check $ompi_aclocal -I config -I opal/config $flags
|
||||
else
|
||||
run_and_check $ompi_aclocal
|
||||
fi
|
||||
@ -1623,12 +1630,35 @@ fi
|
||||
if test -f VERSION -a -f configure.ac -a -f $topdir_file ; then
|
||||
# locations to look for mca modules
|
||||
config_project_list="opal"
|
||||
project_file=config/project_list.m4
|
||||
rm -f $project_file
|
||||
cat > $project_file <<EOF
|
||||
dnl This file is automatically generated by autogen.sh
|
||||
dnl Manual changes will be lost!
|
||||
|
||||
dnl Listing of sub-layers to include
|
||||
m4_define([project_opal], [1])
|
||||
EOF
|
||||
project_name_long="Open Portability Access Layer"
|
||||
project_name_short="open-pal"
|
||||
if test "$want_orte" = "1" ; then
|
||||
config_project_list="$config_project_list orte"
|
||||
echo "m4_define([project_orte], [1])" >> $project_file
|
||||
project_name_long="Open MPI Run Time Environment"
|
||||
project_name_short="openmpi-rte"
|
||||
fi
|
||||
if test "$want_ompi" = "1" ; then
|
||||
config_project_list="$config_project_list ompi"
|
||||
echo "m4_define([project_ompi], [1])" >> $project_file
|
||||
project_name_long="Open MPI"
|
||||
project_name_short="openmpi"
|
||||
fi
|
||||
cat >> $project_file <<EOF
|
||||
|
||||
dnl Project name
|
||||
m4_define([project_name_long], [$project_name_long])
|
||||
m4_define([project_name_short], [$project_name_short])
|
||||
EOF
|
||||
echo "Configuring projects: $config_project_list"
|
||||
|
||||
# Top level of OMPI tree
|
||||
|
||||
@ -32,16 +32,20 @@ dnl
|
||||
AC_DEFUN([OMPI_SETUP_WRAPPER_INIT],[
|
||||
WRAPPER_EXTRA_CPPFLAGS=
|
||||
WRAPPER_EXTRA_CFLAGS=
|
||||
WRAPPER_EXTRA_CXXFLAGS=
|
||||
WRAPPER_EXTRA_FFLAGS=
|
||||
WRAPPER_EXTRA_FCFLAGS=
|
||||
# Only worry about C++ and Fortran if we're building the OMPI project
|
||||
m4_ifdef([project_ompi],
|
||||
[WRAPPER_EXTRA_CXXFLAGS=
|
||||
WRAPPER_EXTRA_FFLAGS=
|
||||
WRAPPER_EXTRA_FCFLAGS=])
|
||||
WRAPPER_EXTRA_LDFLAGS=
|
||||
WRAPPER_EXTRA_LIBS=
|
||||
|
||||
USER_WRAPPER_EXTRA_CFLAGS=
|
||||
USER_WRAPPER_EXTRA_CXXFLAGS=
|
||||
USER_WRAPPER_EXTRA_FFLAGS=
|
||||
USER_WRAPPER_EXTRA_FCFLAGS=
|
||||
# Only worry about C++ and Fortran if we're building the OMPI project
|
||||
m4_ifdef([project_ompi],
|
||||
[USER_WRAPPER_EXTRA_CXXFLAGS=
|
||||
USER_WRAPPER_EXTRA_FFLAGS=
|
||||
USER_WRAPPER_EXTRA_FCFLAGS=])
|
||||
USER_WRAPPER_EXTRA_LDFLAGS=
|
||||
USER_WRAPPER_EXTRA_LIBS=
|
||||
|
||||
@ -54,32 +58,35 @@ AC_DEFUN([OMPI_SETUP_WRAPPER_INIT],[
|
||||
USER_WRAPPER_EXTRA_CFLAGS="$with_wrapper_cflags"
|
||||
fi
|
||||
|
||||
AC_ARG_WITH([wrapper-cxxflags],
|
||||
[AC_HELP_STRING([--with-wrapper-cxxflags],
|
||||
[Extra flags to add to CXXFLAGS when using mpiCC/mpic++])])
|
||||
if test "$with_wrapper_cxxflags" = "yes" -o "$with_wrapper_cxxflags" = "no"; then
|
||||
AC_MSG_ERROR([--with-wrapper-cxxflags must have an argument. Aborting])
|
||||
elif test ! -z "$with_wrapper_cxxflags" ; then
|
||||
USER_WRAPPER_EXTRA_CXXFLAGS="$with_wrapper_cxxflags"
|
||||
fi
|
||||
# Only worry about C++ and Fortran if we're building the OMPI project
|
||||
m4_ifdef([project_ompi],
|
||||
[AC_ARG_WITH([wrapper-cxxflags],
|
||||
[AC_HELP_STRING([--with-wrapper-cxxflags],
|
||||
[Extra flags to add to CXXFLAGS when using mpiCC/mpic++])])
|
||||
if test "$with_wrapper_cxxflags" = "yes" -o "$with_wrapper_cxxflags" = "no"; then
|
||||
AC_MSG_ERROR([--with-wrapper-cxxflags must have an argument. Aborting])
|
||||
elif test ! -z "$with_wrapper_cxxflags" ; then
|
||||
USER_WRAPPER_EXTRA_CXXFLAGS="$with_wrapper_cxxflags"
|
||||
fi
|
||||
|
||||
AC_ARG_WITH([wrapper-fflags],
|
||||
[AC_HELP_STRING([--with-wrapper-fflags],
|
||||
[Extra flags to add to FFLAGS when using mpif77])])
|
||||
if test "$with_wrapper_fflags" = "yes" -o "$with_wrapper_fflags" = "no"; then
|
||||
AC_MSG_ERROR([--with-wrapper-fflags must have an argument. Aborting])
|
||||
elif test ! -z "$with_wrapper_fflags" ; then
|
||||
USER_WRAPPER_EXTRA_FFLAGS="$with_wrapper_fflags"
|
||||
fi
|
||||
AC_ARG_WITH([wrapper-fflags],
|
||||
[AC_HELP_STRING([--with-wrapper-fflags],
|
||||
[Extra flags to add to FFLAGS when using mpif77])])
|
||||
if test "$with_wrapper_fflags" = "yes" -o "$with_wrapper_fflags" = "no"; then
|
||||
AC_MSG_ERROR([--with-wrapper-fflags must have an argument. Aborting])
|
||||
elif test ! -z "$with_wrapper_fflags" ; then
|
||||
USER_WRAPPER_EXTRA_FFLAGS="$with_wrapper_fflags"
|
||||
fi
|
||||
|
||||
AC_ARG_WITH([wrapper-fcflags],
|
||||
[AC_HELP_STRING([--with-wrapper-fcflags],
|
||||
[Extra flags to add to FCFLAGS when using mpif90])])
|
||||
if test "$with_wrapper_fcflags" = "yes" -o "$with_wrapper_fcflags" = "no"; then
|
||||
AC_MSG_ERROR([--with-wrapper-fcflags must have an argument. Aborting])
|
||||
elif test ! -z "$with_wrapper_fcflags" ; then
|
||||
USER_WRAPPER_EXTRA_FCFLAGS="$with_wrapper_fcflags"
|
||||
fi
|
||||
AC_ARG_WITH([wrapper-fcflags],
|
||||
[AC_HELP_STRING([--with-wrapper-fcflags],
|
||||
[Extra flags to add to FCFLAGS when using mpif90])])
|
||||
if test "$with_wrapper_fcflags" = "yes" -o "$with_wrapper_fcflags" = "no"; then
|
||||
AC_MSG_ERROR([--with-wrapper-fcflags must have an argument. Aborting])
|
||||
elif test ! -z "$with_wrapper_fcflags" ; then
|
||||
USER_WRAPPER_EXTRA_FCFLAGS="$with_wrapper_fcflags"
|
||||
fi
|
||||
])
|
||||
|
||||
AC_ARG_WITH([wrapper-ldflags],
|
||||
[AC_HELP_STRING([--with-wrapper-ldflags],
|
||||
@ -104,9 +111,11 @@ AC_DEFUN([OMPI_SETUP_WRAPPER_INIT],[
|
||||
AC_DEFUN([OMPI_SETUP_WRAPPER_FINAL],[
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_CPPFLAGS])
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_CFLAGS])
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_CXXFLAGS])
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_FFLAGS])
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_FCFLAGS])
|
||||
# Only worry about C++ and Fortran if we're building the OMPI project
|
||||
m4_ifdef([project_ompi],
|
||||
[OMPI_UNIQ([WRAPPER_EXTRA_CXXFLAGS])
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_FFLAGS])
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_FCFLAGS])])
|
||||
OMPI_UNIQ([WRAPPER_EXTRA_LDFLAGS])
|
||||
|
||||
#
|
||||
@ -125,11 +134,6 @@ AC_DEFUN([OMPI_SETUP_WRAPPER_FINAL],[
|
||||
AC_SUBST([OPAL_WRAPPER_EXTRA_CFLAGS])
|
||||
AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_CFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OPAL CXXFLAGS])
|
||||
OPAL_WRAPPER_EXTRA_CXXFLAGS="$WRAPPER_EXTRA_CXXFLAGS $USER_WRAPPER_EXTRA_CXXFLAGS"
|
||||
AC_SUBST([OPAL_WRAPPER_EXTRA_CXXFLAGS])
|
||||
AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_CXXFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OPAL LDFLAGS])
|
||||
OPAL_WRAPPER_EXTRA_LDFLAGS="$opal_WRAPPER_EXTRA_LDFLAGS $WRAPPER_EXTRA_LDFLAGS $USER_WRAPPER_EXTRA_LDFLAGS"
|
||||
AC_SUBST([OPAL_WRAPPER_EXTRA_LDFLAGS])
|
||||
@ -152,115 +156,114 @@ AC_DEFUN([OMPI_SETUP_WRAPPER_FINAL],[
|
||||
#
|
||||
# ORTE
|
||||
#
|
||||
OMPI_UNIQ([orte_WRAPPER_EXTRA_LDFLAGS])
|
||||
OMPI_UNIQ([orte_WRAPPER_EXTRA_LIBS])
|
||||
m4_ifdef([project_orte],
|
||||
[OMPI_UNIQ([orte_WRAPPER_EXTRA_LDFLAGS])
|
||||
OMPI_UNIQ([orte_WRAPPER_EXTRA_LIBS])
|
||||
|
||||
AC_MSG_CHECKING([for ORTE CPPFLAGS])
|
||||
ORTE_WRAPPER_EXTRA_CPPFLAGS="$OPAL_WRAPPER_EXTRA_CPPFLAGS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_CPPFLAGS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CPPFLAGS])
|
||||
AC_MSG_CHECKING([for ORTE CPPFLAGS])
|
||||
ORTE_WRAPPER_EXTRA_CPPFLAGS="$OPAL_WRAPPER_EXTRA_CPPFLAGS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_CPPFLAGS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CPPFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for ORTE CFLAGS])
|
||||
ORTE_WRAPPER_EXTRA_CFLAGS="$OPAL_WRAPPER_EXTRA_CFLAGS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_CFLAGS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CFLAGS])
|
||||
AC_MSG_CHECKING([for ORTE CFLAGS])
|
||||
ORTE_WRAPPER_EXTRA_CFLAGS="$OPAL_WRAPPER_EXTRA_CFLAGS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_CFLAGS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for ORTE CXXFLAGS])
|
||||
ORTE_WRAPPER_EXTRA_CXXFLAGS="$OPAL_WRAPPER_EXTRA_CXXFLAGS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_CXXFLAGS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CXXFLAGS])
|
||||
AC_MSG_CHECKING([for ORTE LDFLAGS])
|
||||
ORTE_WRAPPER_EXTRA_LDFLAGS="$orte_WRAPPER_EXTRA_LDFLAGS $OPAL_WRAPPER_EXTRA_LDFLAGS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_LDFLAGS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_LDFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for ORTE LDFLAGS])
|
||||
ORTE_WRAPPER_EXTRA_LDFLAGS="$orte_WRAPPER_EXTRA_LDFLAGS $OPAL_WRAPPER_EXTRA_LDFLAGS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_LDFLAGS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_LDFLAGS])
|
||||
AC_MSG_CHECKING([for ORTE LIBS])
|
||||
ORTE_WRAPPER_EXTRA_LIBS="$orte_WRAPPER_EXTRA_LIBS $OPAL_WRAPPER_EXTRA_LIBS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_LIBS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_LIBS])
|
||||
|
||||
AC_MSG_CHECKING([for ORTE LIBS])
|
||||
ORTE_WRAPPER_EXTRA_LIBS="$orte_WRAPPER_EXTRA_LIBS $OPAL_WRAPPER_EXTRA_LIBS"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_LIBS])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_LIBS])
|
||||
|
||||
AC_MSG_CHECKING([for ORTE extra include dirs])
|
||||
ORTE_WRAPPER_EXTRA_INCLUDES="$OPAL_WRAPPER_EXTRA_INCLUDES"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_INCLUDES])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_INCLUDES])
|
||||
AC_MSG_CHECKING([for ORTE extra include dirs])
|
||||
ORTE_WRAPPER_EXTRA_INCLUDES="$OPAL_WRAPPER_EXTRA_INCLUDES"
|
||||
AC_SUBST([ORTE_WRAPPER_EXTRA_INCLUDES])
|
||||
AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_INCLUDES])
|
||||
])
|
||||
|
||||
#
|
||||
# OMPI
|
||||
#
|
||||
OMPI_UNIQ([ompi_WRAPPER_EXTRA_LDFLAGS])
|
||||
OMPI_UNIQ([ompi_WRAPPER_EXTRA_LIBS])
|
||||
m4_ifdef([project_ompi],
|
||||
[OMPI_UNIQ([ompi_WRAPPER_EXTRA_LDFLAGS])
|
||||
OMPI_UNIQ([ompi_WRAPPER_EXTRA_LIBS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI CPPFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_CPPFLAGS="$ORTE_WRAPPER_EXTRA_CPPFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_CPPFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CPPFLAGS])
|
||||
AC_MSG_CHECKING([for OMPI CPPFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_CPPFLAGS="$ORTE_WRAPPER_EXTRA_CPPFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_CPPFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CPPFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI CFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_CFLAGS="$ORTE_WRAPPER_EXTRA_CFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_CFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CFLAGS])
|
||||
AC_MSG_CHECKING([for OMPI CFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_CFLAGS="$ORTE_WRAPPER_EXTRA_CFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_CFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI CXXFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_CXXFLAGS="$ORTE_WRAPPER_EXTRA_CXXFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_CXXFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CXXFLAGS])
|
||||
AC_MSG_CHECKING([for OMPI CXXFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_CXXFLAGS="$ORTE_WRAPPER_EXTRA_CXXFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_CXXFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CXXFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI FFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_FFLAGS="$WRAPPER_EXTRA_FFLAGS $USER_WRAPPER_EXTRA_FFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_FFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_FFLAGS])
|
||||
AC_MSG_CHECKING([for OMPI FFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_FFLAGS="$WRAPPER_EXTRA_FFLAGS $USER_WRAPPER_EXTRA_FFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_FFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_FFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI FCFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_FCFLAGS="$WRAPPER_EXTRA_FCFLAGS $USER_WRAPPER_EXTRA_FCFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_FCFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_FCFLAGS])
|
||||
AC_MSG_CHECKING([for OMPI FCFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_FCFLAGS="$WRAPPER_EXTRA_FCFLAGS $USER_WRAPPER_EXTRA_FCFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_FCFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_FCFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI LDFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_LDFLAGS="$ompi_WRAPPER_EXTRA_LDFLAGS $ORTE_WRAPPER_EXTRA_LDFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_LDFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LDFLAGS])
|
||||
AC_MSG_CHECKING([for OMPI LDFLAGS])
|
||||
OMPI_WRAPPER_EXTRA_LDFLAGS="$ompi_WRAPPER_EXTRA_LDFLAGS $ORTE_WRAPPER_EXTRA_LDFLAGS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_LDFLAGS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LDFLAGS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI LIBS])
|
||||
OMPI_WRAPPER_EXTRA_LIBS="$ompi_WRAPPER_EXTRA_LIBS $ORTE_WRAPPER_EXTRA_LIBS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_LIBS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LIBS])
|
||||
AC_MSG_CHECKING([for OMPI LIBS])
|
||||
OMPI_WRAPPER_EXTRA_LIBS="$ompi_WRAPPER_EXTRA_LIBS $ORTE_WRAPPER_EXTRA_LIBS"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_LIBS])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LIBS])
|
||||
|
||||
AC_MSG_CHECKING([for OMPI extra include dirs])
|
||||
OMPI_WRAPPER_EXTRA_INCLUDES="$ORTE_WRAPPER_EXTRA_INCLUDES"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_INCLUDES])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_INCLUDES])
|
||||
AC_MSG_CHECKING([for OMPI extra include dirs])
|
||||
OMPI_WRAPPER_EXTRA_INCLUDES="$ORTE_WRAPPER_EXTRA_INCLUDES"
|
||||
AC_SUBST([OMPI_WRAPPER_EXTRA_INCLUDES])
|
||||
AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_INCLUDES])
|
||||
|
||||
# language binding support. C++ is a bit different, as the
|
||||
# compiler should work even if there is no MPI C++ bindings
|
||||
# support. However, we do want it to fail if there is no C++
|
||||
# compiler.
|
||||
if test "$WANT_MPI_CXX_SUPPORT" = "1" ; then
|
||||
OMPI_WRAPPER_CXX_LIB="-lmpi_cxx"
|
||||
OMPI_WRAPPER_CXX_REQUIRED_FILE=""
|
||||
elif test "$CXX" = "none"; then
|
||||
OMPI_WRAPPER_CXX_LIB=""
|
||||
OMPI_WRAPPER_CXX_REQUIRED_FILE="not supported"
|
||||
else
|
||||
OMPI_WRAPPER_CXX_LIB=""
|
||||
OMPI_WRAPPER_CXX_REQUIRED_FILE=""
|
||||
fi
|
||||
AC_SUBST([OMPI_WRAPPER_CXX_LIB])
|
||||
AC_SUBST([OMPI_WRAPPER_CXX_REQUIRED_FILE])
|
||||
# language binding support. C++ is a bit different, as the
|
||||
# compiler should work even if there is no MPI C++ bindings
|
||||
# support. However, we do want it to fail if there is no C++
|
||||
# compiler.
|
||||
if test "$WANT_MPI_CXX_SUPPORT" = "1" ; then
|
||||
OMPI_WRAPPER_CXX_LIB="-lmpi_cxx"
|
||||
OMPI_WRAPPER_CXX_REQUIRED_FILE=""
|
||||
elif test "$CXX" = "none"; then
|
||||
OMPI_WRAPPER_CXX_LIB=""
|
||||
OMPI_WRAPPER_CXX_REQUIRED_FILE="not supported"
|
||||
else
|
||||
OMPI_WRAPPER_CXX_LIB=""
|
||||
OMPI_WRAPPER_CXX_REQUIRED_FILE=""
|
||||
fi
|
||||
AC_SUBST([OMPI_WRAPPER_CXX_LIB])
|
||||
AC_SUBST([OMPI_WRAPPER_CXX_REQUIRED_FILE])
|
||||
|
||||
if test "$OMPI_WANT_F77_BINDINGS" = "1" ; then
|
||||
OMPI_WRAPPER_F77_REQUIRED_FILE=""
|
||||
else
|
||||
OMPI_WRAPPER_F77_REQUIRED_FILE="not supported"
|
||||
fi
|
||||
AC_SUBST([OMPI_WRAPPER_F77_REQUIRED_FILE])
|
||||
if test "$OMPI_WANT_F77_BINDINGS" = "1" ; then
|
||||
OMPI_WRAPPER_F77_REQUIRED_FILE=""
|
||||
else
|
||||
OMPI_WRAPPER_F77_REQUIRED_FILE="not supported"
|
||||
fi
|
||||
AC_SUBST([OMPI_WRAPPER_F77_REQUIRED_FILE])
|
||||
|
||||
if test "$OMPI_WANT_F90_BINDINGS" = "1" ; then
|
||||
OMPI_WRAPPER_F90_REQUIRED_FILE=""
|
||||
else
|
||||
OMPI_WRAPPER_F90_REQUIRED_FILE="not supported"
|
||||
fi
|
||||
AC_SUBST([OMPI_WRAPPER_F90_REQUIRED_FILE])
|
||||
if test "$OMPI_WANT_F90_BINDINGS" = "1" ; then
|
||||
OMPI_WRAPPER_F90_REQUIRED_FILE=""
|
||||
else
|
||||
OMPI_WRAPPER_F90_REQUIRED_FILE="not supported"
|
||||
fi
|
||||
AC_SUBST([OMPI_WRAPPER_F90_REQUIRED_FILE])
|
||||
])
|
||||
|
||||
# For script-based wrappers that don't do relocatable binaries.
|
||||
# Don't use if you don't have to.
|
||||
@ -274,27 +277,30 @@ AC_DEFUN([OMPI_SETUP_WRAPPER_FINAL],[
|
||||
|
||||
# compatibility defines that will eventually go away
|
||||
WRAPPER_EXTRA_CFLAGS="$OMPI_WRAPPER_EXTRA_CFLAGS"
|
||||
WRAPPER_EXTRA_CXXFLAGS="$OMPI_WRAPPER_EXTRA_CXXFLAGS"
|
||||
WRAPPER_EXTRA_FFLAGS="$OMPI_WRAPPER_EXTRA_FFLAGS"
|
||||
WRAPPER_EXTRA_FCFLAGS="$OMPI_WRAPPER_EXTRA_FCFLAGS"
|
||||
m4_ifdef([project_ompi],
|
||||
[WRAPPER_EXTRA_CXXFLAGS="$OMPI_WRAPPER_EXTRA_CXXFLAGS"
|
||||
WRAPPER_EXTRA_FFLAGS="$OMPI_WRAPPER_EXTRA_FFLAGS"
|
||||
WRAPPER_EXTRA_FCFLAGS="$OMPI_WRAPPER_EXTRA_FCFLAGS"])
|
||||
WRAPPER_EXTRA_LDFLAGS="$OMPI_WRAPPER_EXTRA_LDFLAGS"
|
||||
WRAPPER_EXTRA_LIBS="$OMPI_WRAPPER_EXTRA_LIBS"
|
||||
|
||||
AC_SUBST(WRAPPER_EXTRA_CFLAGS)
|
||||
AC_SUBST(WRAPPER_EXTRA_CXXFLAGS)
|
||||
AC_SUBST(WRAPPER_EXTRA_FFLAGS)
|
||||
AC_SUBST(WRAPPER_EXTRA_FCFLAGS)
|
||||
m4_ifdef([project_ompi],
|
||||
[AC_SUBST(WRAPPER_EXTRA_CXXFLAGS)
|
||||
AC_SUBST(WRAPPER_EXTRA_FFLAGS)
|
||||
AC_SUBST(WRAPPER_EXTRA_FCFLAGS)])
|
||||
AC_SUBST(WRAPPER_EXTRA_LDFLAGS)
|
||||
AC_SUBST(WRAPPER_EXTRA_LIBS)
|
||||
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CFLAGS, "$WRAPPER_EXTRA_CFLAGS",
|
||||
[Additional CFLAGS to pass through the wrapper compilers])
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CXXFLAGS, "$WRAPPER_EXTRA_CXXFLAGS",
|
||||
[Additional CXXFLAGS to pass through the wrapper compilers])
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_FFLAGS, "$WRAPPER_EXTRA_FFLAGS",
|
||||
[Additional FFLAGS to pass through the wrapper compilers])
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_FCFLAGS, "$WRAPPER_EXTRA_FCFLAGS",
|
||||
[Additional FCFLAGS to pass through the wrapper compilers])
|
||||
m4_ifdef([project_ompi],
|
||||
[AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CXXFLAGS, "$WRAPPER_EXTRA_CXXFLAGS",
|
||||
[Additional CXXFLAGS to pass through the wrapper compilers])
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_FFLAGS, "$WRAPPER_EXTRA_FFLAGS",
|
||||
[Additional FFLAGS to pass through the wrapper compilers])
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_FCFLAGS, "$WRAPPER_EXTRA_FCFLAGS",
|
||||
[Additional FCFLAGS to pass through the wrapper compilers])])
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_LDFLAGS, "$WRAPPER_EXTRA_LDFLAGS",
|
||||
[Additional LDFLAGS to pass through the wrapper compilers])
|
||||
AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_LIBS, "$WRAPPER_EXTRA_LIBS",
|
||||
|
||||
@ -145,6 +145,7 @@ AC_DEFUN([_OMPI_CHECK_SPECIFIC_ATTRIBUTE], [
|
||||
|
||||
|
||||
AC_DEFUN([OMPI_CHECK_ATTRIBUTES], [
|
||||
AC_LANG(C)
|
||||
AC_MSG_CHECKING(for __attribute__)
|
||||
|
||||
AC_CACHE_VAL(opal_cv___attribute__, [
|
||||
|
||||
@ -801,7 +801,8 @@ dnl
|
||||
dnl #################################################################
|
||||
AC_DEFUN([OMPI_CONFIG_ASM],[
|
||||
AC_REQUIRE([OMPI_SETUP_CC])
|
||||
AC_REQUIRE([OMPI_SETUP_CXX])
|
||||
# Only require C++ if we're building the OMPI project
|
||||
m4_ifdef([project_ompi], [AC_REQUIRE([OMPI_SETUP_CXX])])
|
||||
AC_REQUIRE([AM_PROG_AS])
|
||||
|
||||
# OS X Leopard ld bus errors if you have "-g" or "-gX" in the link line
|
||||
@ -970,10 +971,13 @@ AC_MSG_ERROR([Can not continue.])
|
||||
OMPI_CHECK_INLINE_C_GCC([$OMPI_GCC_INLINE_ASSIGN])
|
||||
OMPI_CHECK_INLINE_C_DEC
|
||||
OMPI_CHECK_INLINE_C_XLC
|
||||
AS_IF([test "$WANT_MPI_CXX_SUPPORT" = "1"],
|
||||
[OMPI_CHECK_INLINE_CXX_GCC([$OMPI_GCC_INLINE_ASSIGN])
|
||||
OMPI_CHECK_INLINE_CXX_DEC
|
||||
OMPI_CHECK_INLINE_CXX_XLC])
|
||||
# Only check C++ if we're building the OMPI project and we
|
||||
# want the C++ bindings
|
||||
m4_ifdef([project_ompi],
|
||||
[AS_IF([test "$WANT_MPI_CXX_SUPPORT" = "1"],
|
||||
[OMPI_CHECK_INLINE_CXX_GCC([$OMPI_GCC_INLINE_ASSIGN])
|
||||
OMPI_CHECK_INLINE_CXX_DEC
|
||||
OMPI_CHECK_INLINE_CXX_XLC])])
|
||||
|
||||
# format:
|
||||
# config_file-text-global-label_suffix-gsym-lsym-type-size-align_log-ppc_r_reg-64_bit-gnu_stack
|
||||
|
||||
10
config/project_list.m4
Обычный файл
10
config/project_list.m4
Обычный файл
@ -0,0 +1,10 @@
|
||||
dnl This file is automatically generated by autogen.sh
|
||||
dnl Manual changes will be lost!
|
||||
|
||||
dnl Listing of sub-layers to include
|
||||
m4_define([project_opal], [1])
|
||||
m4_define([project_orte], [1])
|
||||
|
||||
dnl Project name
|
||||
m4_define([project_name_long], [Open MPI Run Time Environment])
|
||||
m4_define([project_name_short], [openmpi-rte])
|
||||
451
configure.ac
451
configure.ac
@ -27,15 +27,19 @@
|
||||
# Initialization, version number, and other random setup/init stuff
|
||||
############################################################################
|
||||
|
||||
# Load project list and names
|
||||
m4_include([config/project_list.m4])
|
||||
|
||||
# Init autoconf
|
||||
|
||||
# We don't have the version number to put in here yet, and we can't
|
||||
# call OMPI_GET_VERSION (etc.) before AC_INIT. So use the shell
|
||||
# version.
|
||||
# version. project_name_* comes from config/project_list.m4, which
|
||||
# was set during autogen.sh.
|
||||
|
||||
AC_INIT([Open MPI],
|
||||
AC_INIT([project_name_long],
|
||||
[m4_normalize(esyscmd([config/ompi_get_version.sh VERSION --base]))],
|
||||
[http://www.open-mpi.org/community/help/], [openmpi])
|
||||
[http://www.open-mpi.org/community/help/], [project_name_short])
|
||||
AC_PREREQ(2.60)
|
||||
AC_CONFIG_AUX_DIR(config)
|
||||
AC_CONFIG_MACRO_DIR(config)
|
||||
@ -54,22 +58,29 @@ m4_pattern_allow([m4_ifval])
|
||||
# Make configure depend on the VERSION file, since it's used in AC_INIT
|
||||
AC_SUBST([CONFIGURE_DEPENDENCIES], ['$(top_srcdir)/VERSION'])
|
||||
|
||||
# Set up project specific AM_CONDITIONALs
|
||||
AM_CONDITIONAL([PROJECT_OMPI], m4_ifdef([project_ompi], [/bin/true], [/bin/false]))
|
||||
AM_CONDITIONAL([PROJECT_ORTE], m4_ifdef([project_orte], [/bin/true], [/bin/false]))
|
||||
|
||||
#
|
||||
# Start it up
|
||||
#
|
||||
|
||||
OMPI_CONFIGURE_SETUP
|
||||
ompi_show_title "Configuring Open MPI"
|
||||
ompi_show_title "Configuring project_name_long"
|
||||
|
||||
ompi_show_subtitle "Checking versions"
|
||||
|
||||
# Get the version of OMPI that we are installing
|
||||
|
||||
OMPI_SAVE_VERSION([OMPI], [Open MPI], [$srcdir/VERSION],
|
||||
[ompi/include/ompi/version.h])
|
||||
m4_ifdef([project_ompi],
|
||||
[OMPI_SAVE_VERSION([OMPI], [Open MPI], [$srcdir/VERSION],
|
||||
[ompi/include/ompi/version.h])])
|
||||
|
||||
OMPI_SAVE_VERSION([ORTE], [Open Run-Time Environment], [$srcdir/VERSION],
|
||||
[orte/include/orte/version.h])
|
||||
m4_ifdef([project_orte],
|
||||
[OMPI_SAVE_VERSION([ORTE], [Open MPI Run-Time Environment],
|
||||
[$srcdir/VERSION],
|
||||
[orte/include/orte/version.h])])
|
||||
|
||||
OMPI_SAVE_VERSION([OPAL], [Open Portable Access Layer], [$srcdir/VERSION],
|
||||
[opal/include/opal/version.h])
|
||||
@ -77,16 +88,22 @@ OMPI_SAVE_VERSION([OPAL], [Open Portable Access Layer], [$srcdir/VERSION],
|
||||
# Get shared library version numbers
|
||||
|
||||
. $srcdir/VERSION
|
||||
AC_SUBST(libmpi_so_version)
|
||||
AC_SUBST(libmpi_cxx_so_version)
|
||||
AC_SUBST(libmpi_f77_so_version)
|
||||
AC_SUBST(libmpi_f90_so_version)
|
||||
AC_SUBST(libopen_rte_so_version)
|
||||
m4_ifdef([project_ompi],
|
||||
[AC_SUBST(libmpi_so_version)
|
||||
AC_SUBST(libmpi_cxx_so_version)
|
||||
AC_SUBST(libmpi_f77_so_version)
|
||||
AC_SUBST(libmpi_f90_so_version)])
|
||||
m4_ifdef([project_orte],
|
||||
[AC_SUBST(libopen_rte_so_version)])
|
||||
AC_SUBST(libopen_pal_so_version)
|
||||
|
||||
# List header files to generate
|
||||
|
||||
AM_CONFIG_HEADER([opal/include/opal_config.h orte/include/orte_config.h ompi/include/ompi_config.h ompi/include/mpi.h ompi/include/mpi_portable_platform.h])
|
||||
AM_CONFIG_HEADER([opal/include/opal_config.h])
|
||||
m4_ifdef([project_orte],
|
||||
[AM_CONFIG_HEADER([orte/include/orte_config.h])])
|
||||
m4_ifdef([project_ompi],
|
||||
[AM_CONFIG_HEADER([ompi/include/ompi_config.h ompi/include/mpi.h ompi/include/mpi_portable_platform.h])])
|
||||
|
||||
# override/fixup the version numbers set by AC_INIT, since on
|
||||
# developer builds, there's no good way to know what the version is
|
||||
@ -161,8 +178,8 @@ AC_SUBST(top_ompi_builddir)
|
||||
############################################################################
|
||||
|
||||
OPAL_CONFIGURE_OPTIONS
|
||||
ORTE_CONFIGURE_OPTIONS
|
||||
OMPI_CONFIGURE_OPTIONS
|
||||
m4_ifdef([project_orte], [ORTE_CONFIGURE_OPTIONS])
|
||||
m4_ifdef([project_ompi], [OMPI_CONFIGURE_OPTIONS])
|
||||
|
||||
if test "$enable_binaries" = "no" -a "$enable_dist" = "yes"; then
|
||||
AC_MSG_WARN([--disable-binaries is incompatible with --enable dist])
|
||||
@ -249,6 +266,8 @@ AC_CHECK_TYPES(uint128_t)
|
||||
AC_CHECK_TYPES(long long)
|
||||
|
||||
AC_CHECK_TYPES(long double)
|
||||
# We only need these types if we're building the OMPI project, but
|
||||
# OPAL currently doesn't protect for their lack of presence well.
|
||||
AC_CHECK_TYPES(float _Complex)
|
||||
AC_CHECK_TYPES(double _Complex)
|
||||
AC_CHECK_TYPES(long double _Complex)
|
||||
@ -276,6 +295,8 @@ if test $ac_cv_type_long_double = yes; then
|
||||
AC_CHECK_SIZEOF(long double)
|
||||
fi
|
||||
|
||||
# We only need these types if we're building the OMPI project, but
|
||||
# OPAL currently doesn't protect for their lack of presence well.
|
||||
if test "$ac_cv_type_float__Complex" = yes; then
|
||||
AC_CHECK_SIZEOF(float _Complex)
|
||||
fi
|
||||
@ -323,6 +344,8 @@ if test "$ac_cv_type_long_double" = yes; then
|
||||
OMPI_C_GET_ALIGNMENT(long double, OPAL_ALIGNMENT_LONG_DOUBLE)
|
||||
fi
|
||||
|
||||
# We only need these types if we're building the OMPI project, but
|
||||
# OPAL currently doesn't protect for their lack of presence well.
|
||||
if test "$ac_cv_type_float__Complex" = yes; then
|
||||
OMPI_C_GET_ALIGNMENT(float _Complex, OPAL_ALIGNMENT_FLOAT_COMPLEX)
|
||||
fi
|
||||
@ -415,45 +438,16 @@ fi
|
||||
|
||||
OPAL_CHECK_OFFSETOF
|
||||
|
||||
#
|
||||
# There are 2 layers to the MPI Language binidings One layer generates
|
||||
# MPI_* bindings. The other layer generates PMPI_* bindings. The
|
||||
# following conditions determine whether each (or both) these layers
|
||||
# are built.
|
||||
# 1. MPI_* bindings are needed if:
|
||||
# - Profiling is not required
|
||||
# - Profiling is required but weak symbols are not
|
||||
# supported
|
||||
# 2. PMPI_* bindings are needed if profiling is required. Hence we
|
||||
# define 2 conditionals which tell us whether each of these layers
|
||||
# need to be built or NOT
|
||||
#
|
||||
# Setup OMPI bindings (if we're building the OMPI project)
|
||||
|
||||
AM_CONDITIONAL(WANT_MPI_BINDINGS_LAYER,
|
||||
test "$WANT_MPI_PROFILING" = 0 -o "$OMPI_PROFILING_COMPILE_SEPARATELY" = 1)
|
||||
|
||||
AM_CONDITIONAL(WANT_PMPI_BINDINGS_LAYER,
|
||||
test "$WANT_MPI_PROFILING" = 1)
|
||||
AM_CONDITIONAL(COMPILE_PROFILING_SEPARATELY,
|
||||
test "$OMPI_PROFILING_COMPILE_SEPARATELY" = 1)
|
||||
AC_DEFINE_UNQUOTED(OMPI_ENABLE_MPI_PROFILING, $WANT_MPI_PROFILING,
|
||||
[Whether we want MPI profiling or not])
|
||||
AC_DEFINE_UNQUOTED(OPAL_HAVE_WEAK_SYMBOLS, $OPAL_C_HAVE_WEAK_SYMBOLS,
|
||||
[Whether we have weak symbols or not])
|
||||
m4_ifdef([project_ompi], [OMPI_SETUP_MPI_PROFILING])
|
||||
|
||||
|
||||
##################################
|
||||
# C++ compiler characteristics
|
||||
##################################
|
||||
|
||||
OMPI_SETUP_CXX
|
||||
|
||||
# check if we want C++ support
|
||||
|
||||
AM_CONDITIONAL(WANT_MPI_CXX_BINDINGS,
|
||||
test "$WANT_MPI_CXX_SUPPORT" = 1)
|
||||
AC_DEFINE_UNQUOTED(OMPI_WANT_CXX_BINDINGS, $WANT_MPI_CXX_SUPPORT,
|
||||
[Whether we want MPI cxx support or not])
|
||||
m4_ifdef([project_ompi], [OMPI_SETUP_CXX])
|
||||
|
||||
|
||||
##################################
|
||||
@ -467,6 +461,7 @@ OMPI_CHECK_ATTRIBUTES
|
||||
|
||||
OPAL_CHECK_COMPILER_VERSION_ID
|
||||
|
||||
|
||||
##################################
|
||||
# Assembler Configuration
|
||||
##################################
|
||||
@ -481,209 +476,18 @@ OMPI_CONFIG_ASM
|
||||
# Fortran
|
||||
##################################
|
||||
|
||||
#-----------
|
||||
# Fortran 77
|
||||
#-----------
|
||||
|
||||
OMPI_SETUP_F77
|
||||
|
||||
# This allows us to mark bogus types, but still have them be a valid
|
||||
# [sentinel] value
|
||||
|
||||
AC_DEFINE([ompi_fortran_bogus_type_t], [int],
|
||||
[A bogus type that allows us to have sentinel type values that are still valid])
|
||||
|
||||
# We want to set the #define's for all of these, so invoke the macros
|
||||
# regardless of whether we have F77 support or not.
|
||||
OMPI_F77_CHECK([CHARACTER], [yes],
|
||||
[char, int32_t, int, int64_t, long long, long], [-1])
|
||||
|
||||
OMPI_F77_CHECK([LOGICAL], [yes],
|
||||
[char, int32_t, int, int64_t, long long, long], [-1])
|
||||
OMPI_F77_CHECK([LOGICAL*1], [yes],
|
||||
[char, int8_t, short, int32_t, int, int64_t, long long, long], [1])
|
||||
OMPI_F77_CHECK([LOGICAL*2], [yes],
|
||||
[short, int16_t, int32_t, int, int64_t, long long, long], [2])
|
||||
OMPI_F77_CHECK([LOGICAL*4], [yes],
|
||||
[int32_t, int, int64_t, long long, long], [4])
|
||||
OMPI_F77_CHECK([LOGICAL*8], [yes],
|
||||
[int, int64_t, long long, long], [8])
|
||||
|
||||
OMPI_F77_CHECK([INTEGER], [yes],
|
||||
[int32_t, int, int64_t, long long, long], [-1])
|
||||
OMPI_F77_CHECK([INTEGER*1], [no],
|
||||
[char, int8_t, short, int, int64_t, long long, long], [1])
|
||||
OMPI_F77_CHECK([INTEGER*2], [no],
|
||||
[short, int16_t, int32_t, int, int64_t, long long, long], [2])
|
||||
OMPI_F77_CHECK([INTEGER*4], [no],
|
||||
[int32_t, int, int64_t, long long, long], [4])
|
||||
OMPI_F77_CHECK([INTEGER*8], [no],
|
||||
[int, int64_t, long long, long], [8])
|
||||
OMPI_F77_CHECK([INTEGER*16], [no],
|
||||
[int, int64_t, long long, long], [16])
|
||||
|
||||
OMPI_F77_CHECK([REAL], [yes],
|
||||
[float, double, long double], [-1])
|
||||
OMPI_F77_CHECK([REAL*2], [no],
|
||||
[float, double, long double], [2])
|
||||
OMPI_F77_CHECK([REAL*4], [no],
|
||||
[float, double, long double], [4])
|
||||
OMPI_F77_CHECK([REAL*8], [no],
|
||||
[float, double, long double], [8])
|
||||
OMPI_F77_CHECK([REAL*16], [no],
|
||||
[float, double, long double], [16])
|
||||
|
||||
# In some compilers, the bit representation of REAL*16 is not the same
|
||||
# as the C counterpart that we found. If this is the case, then we
|
||||
# want to disable reduction support for MPI_REAL16 (per ticket #1603).
|
||||
OMPI_F77_CHECK_REAL16_C_EQUIV
|
||||
|
||||
OMPI_F77_CHECK([DOUBLE PRECISION], [yes],
|
||||
[float, double, long double], [-1])
|
||||
|
||||
OMPI_F77_CHECK([COMPLEX], [yes], [], [-1])
|
||||
|
||||
# The complex*N tests are a bit different (note: the complex tests are
|
||||
# the same as all the rest, because complex is a composite of two
|
||||
# reals, which we *have* to have. It's only the complex*N tests that
|
||||
# are different). The fortran complex types are composites of the
|
||||
# real*(N/2) types. So for us to support complex*N, two conditions
|
||||
# must be true:
|
||||
#
|
||||
# a) we must support real*(N/2) (i.e., compiler supports it and we
|
||||
# have a back-end C type for it)
|
||||
# b) compiler supports complex*N
|
||||
|
||||
OMPI_F77_CHECK([COMPLEX*8], [no], [], [8])
|
||||
OMPI_F77_CHECK([COMPLEX*16], [no], [], [16])
|
||||
OMPI_F77_CHECK([COMPLEX*32], [no], [], [32])
|
||||
|
||||
# Regardless of whether we have fortran bindings, or even a fortran
|
||||
# compiler, get the max value for a fortran MPI handle (this macro
|
||||
# handles the case where we don't have a fortran compiler).
|
||||
|
||||
OMPI_F77_GET_FORTRAN_HANDLE_MAX
|
||||
|
||||
#
|
||||
# Check for Fortran compilers value of TRUE and for the correct assumption
|
||||
# on LOGICAL for conversion into what C considers to be a true value
|
||||
#
|
||||
OMPI_F77_GET_VALUE_TRUE
|
||||
OMPI_F77_CHECK_LOGICAL_ARRAY
|
||||
|
||||
#
|
||||
# There are 2 layers to the MPI f77 layer. The only extra thing that
|
||||
# determine f77 bindings is that fortran can be disabled by user. In
|
||||
# such cases, we need to not build the target at all. One layer
|
||||
# generates MPI_f77* bindings. The other layer generates PMPI_f77*
|
||||
# bindings. The following conditions determine whether each (or both)
|
||||
# these layers are built.
|
||||
#
|
||||
# Superceeding clause:
|
||||
# - fortran77 bindings should be enabled, else everything is
|
||||
# disabled
|
||||
# 1. MPI_f77* bindings are needed if:
|
||||
# - Profiling is not required
|
||||
# - Profiling is required but weak symbols are not
|
||||
# supported
|
||||
# 2. PMPI_* bindings are needed if profiling is required. Hence we
|
||||
# define 2 conditionals which tell us whether each of these layers
|
||||
# need to be built or NOT
|
||||
#
|
||||
AM_CONDITIONAL(WANT_MPI_F77_BINDINGS_LAYER,
|
||||
test \( "$WANT_MPI_PROFILING" = 0 -o "$OMPI_PROFILING_COMPILE_SEPARATELY" = 1 \) -a "$OMPI_WANT_F77_BINDINGS" = 1)
|
||||
|
||||
AM_CONDITIONAL(WANT_PMPI_F77_BINDINGS_LAYER,
|
||||
test "$OMPI_WANT_F77_BINDINGS" = 1 -a "$WANT_MPI_PROFILING" = 1)
|
||||
|
||||
#-----------
|
||||
# Fortran 90
|
||||
#-----------
|
||||
|
||||
OMPI_SETUP_F90
|
||||
|
||||
# Look for the fortran module compiler flag
|
||||
OMPI_F90_FIND_MODULE_INCLUDE_FLAG
|
||||
|
||||
# Look for all the types
|
||||
OMPI_F90_IKINDS=""
|
||||
OMPI_F90_RKINDS=""
|
||||
OMPI_F90_CKINDS=""
|
||||
|
||||
OMPI_F90_CHECK([CHARACTER])
|
||||
|
||||
# LOGICAL and friends
|
||||
OMPI_F90_CHECK([LOGICAL])
|
||||
OMPI_F90_CHECK([LOGICAL*1], [1])
|
||||
OMPI_F90_CHECK([LOGICAL*2], [2])
|
||||
OMPI_F90_CHECK([LOGICAL*4], [4])
|
||||
OMPI_F90_CHECK([LOGICAL*8], [8])
|
||||
|
||||
# INTEGER and friends
|
||||
OMPI_F90_CHECK([INTEGER])
|
||||
OMPI_F90_CHECK([INTEGER*1], [1])
|
||||
OMPI_F90_CHECK([INTEGER*2], [2])
|
||||
OMPI_F90_CHECK([INTEGER*4], [4])
|
||||
OMPI_F90_CHECK([INTEGER*8], [8])
|
||||
OMPI_F90_CHECK([INTEGER*16], [16])
|
||||
|
||||
# REAL, DOUBLE PRECISION, REAL*4, *8, *16
|
||||
OMPI_F90_CHECK([REAL])
|
||||
OMPI_F90_CHECK([REAL*2], [2])
|
||||
OMPI_F90_CHECK([REAL*4], [4])
|
||||
OMPI_F90_CHECK([REAL*8], [8])
|
||||
OMPI_F90_CHECK([REAL*16], [16])
|
||||
OMPI_F90_CHECK([DOUBLE PRECISION])
|
||||
|
||||
# COMPLEX, DOUBLE COMPLEX, COMPLEX*8, *16, *32
|
||||
OMPI_F90_CHECK([COMPLEX])
|
||||
OMPI_F90_CHECK([COMPLEX*8], [8])
|
||||
OMPI_F90_CHECK([COMPLEX*16], [16])
|
||||
OMPI_F90_CHECK([COMPLEX*32], [32])
|
||||
OMPI_F90_CHECK([DOUBLE COMPLEX])
|
||||
|
||||
AC_SUBST(OMPI_F90_IKINDS)
|
||||
AC_SUBST(OMPI_F90_RKINDS)
|
||||
AC_SUBST(OMPI_F90_CKINDS)
|
||||
|
||||
# get kind value for Fortran MPI_INTEGER_KIND (corresponding to
|
||||
# whatever is the same size as a F77 INTEGER -- for the
|
||||
# most-likely-will-never-occur case where F77 INTEGER is smaller than
|
||||
# an F90 INTEGER; see MPI-2 4.12.6.5
|
||||
if test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "2"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 4, OMPI_MPI_INTEGER_KIND)
|
||||
elif test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "4"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 9, OMPI_MPI_INTEGER_KIND)
|
||||
elif test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "8"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 18, OMPI_MPI_INTEGER_KIND)
|
||||
elif test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "16"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 19, OMPI_MPI_INTEGER_KIND)
|
||||
AC_MSG_ERROR([Cannot support Fortran MPI_INTEGER_KIND!])
|
||||
fi
|
||||
AC_SUBST(OMPI_MPI_INTEGER_KIND)
|
||||
|
||||
# get kind value for Fortran MPI_ADDRESS_KIND (corresponding to
|
||||
# whatever is big enough to hold (void*))
|
||||
if test $ac_cv_sizeof_void_p = 2 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 4, OMPI_MPI_ADDRESS_KIND)
|
||||
elif test $ac_cv_sizeof_void_p = 4 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 9, OMPI_MPI_ADDRESS_KIND)
|
||||
elif test $ac_cv_sizeof_void_p = 8 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 18, OMPI_MPI_ADDRESS_KIND)
|
||||
elif test $ac_cv_sizeof_void_p = 16 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 19, OMPI_MPI_ADDRESS_KIND)
|
||||
else
|
||||
AC_MSG_ERROR([Cannot support Fortran MPI_ADDRESS_KIND!])
|
||||
fi
|
||||
AC_SUBST(OMPI_MPI_ADDRESS_KIND)
|
||||
|
||||
# get kind value for Fortran MPI_OFFSET_KIND (corresponding to INTEGER*8)
|
||||
OMPI_F90_GET_INT_KIND(MPI_OFFSET_KIND, 18, OMPI_MPI_OFFSET_KIND)
|
||||
AC_SUBST(OMPI_MPI_OFFSET_KIND)
|
||||
# OPAL uses opal_fortran_logical_t and OMPI_FORTRAN_HANDLE_MAX (long
|
||||
# story; yes, it's an intentional abstraction break). So ensure to
|
||||
# define it to a valid C type if we're not building the OMPI project.
|
||||
m4_ifdef([project_ompi], [OMPI_SETUP_MPI_FORTRAN],
|
||||
[AC_DEFINE([ompi_fortran_logical_t], [int], [Bogus type for OPAL])
|
||||
AC_DEFINE([OMPI_FORTRAN_HANDLE_MAX], [128], [Bogus type for OPAL])
|
||||
])
|
||||
|
||||
# checkpoint results
|
||||
AC_CACHE_SAVE
|
||||
|
||||
|
||||
##################################
|
||||
# Header files
|
||||
##################################
|
||||
@ -1008,18 +812,20 @@ AC_DEFINE_UNQUOTED([OPAL_ALIGN_WORD_SIZE_INTEGERS], [$results],
|
||||
|
||||
OMPI_CONFIG_THREADS
|
||||
CFLAGS="$CFLAGS $THREAD_CFLAGS"
|
||||
CXXFLAGS="$CXXFLAGS $THREAD_CXXFLAGS"
|
||||
CPPFLAGS="$CPPFLAGS $THREAD_CPPFLAGS"
|
||||
CXXCPPFLAGS="$CXXCPPFLAGS $THREAD_CXXCPPFLAGS"
|
||||
m4_ifdef([project_ompi],
|
||||
[CXXFLAGS="$CXXFLAGS $THREAD_CXXFLAGS"
|
||||
CPPFLAGS="$CPPFLAGS $THREAD_CPPFLAGS"
|
||||
CXXCPPFLAGS="$CXXCPPFLAGS $THREAD_CXXCPPFLAGS"])
|
||||
LDFLAGS="$LDFLAGS $THREAD_LDFLAGS"
|
||||
LIBS="$LIBS $THREAD_LIBS"
|
||||
|
||||
|
||||
WRAPPER_EXTRA_CPPFLAGS="$WRAPPER_EXTRA_CPPFLAGS $THREAD_CPPFLAGS"
|
||||
WRAPPER_EXTRA_CFLAGS="$WRAPPER_EXTRA_CFLAGS $THREAD_CFLAGS"
|
||||
WRAPPER_EXTRA_CXXFLAGS="$WRAPPER_EXTRA_CXXFLAGS $THREAD_CXXFLAGS"
|
||||
WRAPPER_EXTRA_FFLAGS="$WRAPPER_EXTRA_FFLAGS $THREAD_FFLAGS"
|
||||
WRAPPER_EXTRA_FCFLAGS="$WRAPPER_EXTRA_FCFLAGS $THREAD_FFLAGS"
|
||||
m4_ifdef([project_ompi],
|
||||
[WRAPPER_EXTRA_CXXFLAGS="$WRAPPER_EXTRA_CXXFLAGS $THREAD_CXXFLAGS"
|
||||
WRAPPER_EXTRA_FFLAGS="$WRAPPER_EXTRA_FFLAGS $THREAD_FFLAGS"
|
||||
WRAPPER_EXTRA_FCFLAGS="$WRAPPER_EXTRA_FCFLAGS $THREAD_FFLAGS"])
|
||||
WRAPPER_EXTRA_LDFLAGS="$WRAPPER_EXTRA_LDFLAGS $THREAD_LDFLAGS"
|
||||
# no need to update WRAPPER_EXTRA_LIBS - we'll get it from LT later
|
||||
|
||||
@ -1067,13 +873,13 @@ fi
|
||||
#
|
||||
# Look for ps command and arguments for orte-clean
|
||||
#
|
||||
OMPI_PS_FLAVOR_CHECK
|
||||
m4_ifdef([project_orte], [OMPI_PS_FLAVOR_CHECK])
|
||||
|
||||
#
|
||||
# File system case sensitivity
|
||||
#
|
||||
|
||||
OMPI_CASE_SENSITIVE_FS_SETUP
|
||||
m4_ifdef([project_ompi], [OMPI_CASE_SENSITIVE_FS_SETUP])
|
||||
|
||||
# AIX: FIONBIO in sys/ioctl.h
|
||||
# glibc: memcpy
|
||||
@ -1121,12 +927,7 @@ AC_CACHE_SAVE
|
||||
# MPI Extended Interfaces
|
||||
##################################
|
||||
|
||||
ompi_show_title "Extended MPI interfaces setup"
|
||||
|
||||
OMPI_EXT
|
||||
|
||||
AC_DEFINE_UNQUOTED(OMPI_EXT_COMPONENTS, "$EXT_mpiext_ALL_COMPONENTS",
|
||||
[MPI Extended Interface Components])
|
||||
m4_ifdef([project_ompi], [OMPI_SETUP_MPI_EXT])
|
||||
|
||||
# checkpoint results
|
||||
AC_CACHE_SAVE
|
||||
@ -1146,14 +947,13 @@ OMPI_CHECK_VISIBILITY
|
||||
# Contributed software
|
||||
##################################
|
||||
|
||||
ompi_show_title "Contributed software setup"
|
||||
|
||||
OMPI_CONTRIB
|
||||
m4_ifdef([project_ompi], [OMPI_SETUP_CONTRIB])
|
||||
|
||||
# checkpoint results
|
||||
AC_CACHE_SAVE
|
||||
|
||||
|
||||
|
||||
############################################################################
|
||||
# Final top-level OMPI configuration
|
||||
############################################################################
|
||||
@ -1292,40 +1092,23 @@ ompi_show_subtitle "Compiler flags"
|
||||
# source directories, however.
|
||||
#
|
||||
if test "$OMPI_TOP_BUILDDIR" != "$OMPI_TOP_SRCDIR"; then
|
||||
CPPFLAGS='-I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/opal/include -I$(top_srcdir)/orte/include -I$(top_srcdir)/ompi/include'" $CPPFLAGS"
|
||||
CXXCPPFLAGS='-I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/opal/include -I$(top_srcdir)/orte/include -I$(top_srcdir)/ompi/include'" $CXXCPPFLAGS"
|
||||
# Note the embedded m4 directives here -- we must embed them
|
||||
# rather than have successive assignments to these shell
|
||||
# variables, lest the $(foo) names try to get evaluated here.
|
||||
# Yuck!
|
||||
CPPFLAGS='-I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/opal/include m4_ifdef([project_orte], [-I$(top_srcdir)/orte/include]) m4_ifdef([project_ompi], [-I$(top_srcdir)/ompi/include])'" $CPPFLAGS"
|
||||
# C++ is only relevant if we're building OMPI
|
||||
m4_ifdef([project_ompi], [CXXCPPFLAGS='-I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/opal/include -I$(top_srcdir)/orte/include -I$(top_srcdir)/ompi/include'" $CXXCPPFLAGS"])
|
||||
else
|
||||
CPPFLAGS='-I$(top_srcdir)'" $CPPFLAGS"
|
||||
CXXCPPFLAGS='-I$(top_srcdir)'" $CXXCPPFLAGS"
|
||||
# C++ is only relevant if we're building OMPI
|
||||
m4_ifdef([project_ompi], [CXXCPPFLAGS='-I$(top_srcdir)'" $CXXCPPFLAGS"])
|
||||
fi
|
||||
|
||||
#
|
||||
# Do a final process of the CFLAGS to make a WITHOUT_OPTFLAGS version.
|
||||
# We need this so that we can guarantee to build the TotalView stuff
|
||||
# with -g and nothing else.
|
||||
#
|
||||
|
||||
OMPI_MAKE_STRIPPED_FLAGS($CFLAGS)
|
||||
CFLAGS_WITHOUT_OPTFLAGS="$s_result"
|
||||
if test "$with_tv_debug_flags" != ""; then
|
||||
TOTALVIEW_DEBUG_FLAGS="$with_tv_debug_flags"
|
||||
else
|
||||
# Tweak the compiler flags passed to orterun for Sun Studio SPARC
|
||||
# https://svn.open-mpi.org/trac/ompi/ticket/1448
|
||||
if test "x$ompi_cv_c_compiler_vendor" = "xsun" -a -n "`echo $host | $GREP sparc`"; then
|
||||
TOTALVIEW_DEBUG_FLAGS="-g -xO0"
|
||||
else
|
||||
TOTALVIEW_DEBUG_FLAGS="-g"
|
||||
fi
|
||||
fi
|
||||
AC_MSG_CHECKING([which of CFLAGS are ok for TotalView modules])
|
||||
AC_MSG_RESULT([$CFLAGS_WITHOUT_OPTFLAGS])
|
||||
AC_MSG_CHECKING([extra CFLAGS for TotalView modules])
|
||||
AC_MSG_RESULT([$TOTALVIEW_DEBUG_FLAGS])
|
||||
|
||||
AC_SUBST(CFLAGS_WITHOUT_OPTFLAGS)
|
||||
AC_SUBST(TOTALVIEW_DEBUG_FLAGS)
|
||||
# OMPI wants some additional processing of the flags (e.g., get
|
||||
# versions without optimization for debugger modules).
|
||||
|
||||
m4_ifdef([project_ompi], [OMPI_SETUP_DEBUGGER_FLAGS])
|
||||
|
||||
#
|
||||
# Delayed the substitution of CFLAGS and CXXFLAGS until now because
|
||||
@ -1334,13 +1117,13 @@ AC_SUBST(TOTALVIEW_DEBUG_FLAGS)
|
||||
|
||||
AC_SUBST(CFLAGS)
|
||||
AC_SUBST(CPPFLAGS)
|
||||
AC_SUBST(CXXFLAGS)
|
||||
AC_SUBST(CXXCPPFLAGS)
|
||||
AC_SUBST(FFLAGS)
|
||||
AC_SUBST(FCFLAGS)
|
||||
m4_ifdef([project_ompi], [AC_SUBST(CXXFLAGS)
|
||||
AC_SUBST(CXXCPPFLAGS)
|
||||
AC_SUBST(FFLAGS)
|
||||
AC_SUBST(FCFLAGS)
|
||||
|
||||
AC_SUBST(OMPI_LIBMPI_EXTRA_LIBS)
|
||||
AC_SUBST(OMPI_LIBMPI_EXTRA_LDFLAGS)
|
||||
AC_SUBST(OMPI_LIBMPI_EXTRA_LIBS)
|
||||
AC_SUBST(OMPI_LIBMPI_EXTRA_LDFLAGS)])
|
||||
|
||||
#
|
||||
# Aggregate MCA parameters directory
|
||||
@ -1388,76 +1171,16 @@ AC_CONFIG_FILES([
|
||||
|
||||
contrib/Makefile
|
||||
|
||||
opal/Makefile
|
||||
opal/etc/Makefile
|
||||
opal/include/Makefile
|
||||
opal/asm/Makefile
|
||||
opal/datatype/Makefile
|
||||
opal/event/Makefile
|
||||
opal/event/compat/Makefile
|
||||
opal/event/compat/sys/Makefile
|
||||
opal/util/Makefile
|
||||
opal/util/keyval/Makefile
|
||||
opal/mca/base/Makefile
|
||||
opal/tools/wrappers/Makefile
|
||||
opal/tools/wrappers/opalcc-wrapper-data.txt
|
||||
opal/tools/wrappers/opalc++-wrapper-data.txt
|
||||
opal/tools/opal-checkpoint/Makefile
|
||||
opal/tools/opal-restart/Makefile
|
||||
|
||||
orte/Makefile
|
||||
orte/include/Makefile
|
||||
orte/etc/Makefile
|
||||
|
||||
orte/tools/orted/Makefile
|
||||
orte/tools/orterun/Makefile
|
||||
orte/tools/wrappers/Makefile
|
||||
orte/tools/wrappers/ortecc-wrapper-data.txt
|
||||
orte/tools/wrappers/ortec++-wrapper-data.txt
|
||||
orte/tools/orte-checkpoint/Makefile
|
||||
orte/tools/orte-iof/Makefile
|
||||
orte/tools/orte-restart/Makefile
|
||||
orte/tools/orte-ps/Makefile
|
||||
orte/tools/orte-clean/Makefile
|
||||
orte/tools/orte-top/Makefile
|
||||
orte/tools/orte-bootproxy/Makefile
|
||||
|
||||
ompi/Makefile
|
||||
ompi/etc/Makefile
|
||||
ompi/include/Makefile
|
||||
ompi/include/mpif.h
|
||||
ompi/include/mpif-config.h
|
||||
|
||||
ompi/datatype/Makefile
|
||||
ompi/debuggers/Makefile
|
||||
|
||||
ompi/mpi/c/Makefile
|
||||
ompi/mpi/c/profile/Makefile
|
||||
ompi/mpi/cxx/Makefile
|
||||
ompi/mpi/f77/Makefile
|
||||
ompi/mpi/f77/profile/Makefile
|
||||
ompi/mpi/f90/Makefile
|
||||
ompi/mpi/f90/fortran_kinds.sh
|
||||
ompi/mpi/f90/fortran_sizes.h
|
||||
ompi/mpi/f90/scripts/Makefile
|
||||
|
||||
ompi/tools/ompi_info/Makefile
|
||||
ompi/tools/wrappers/Makefile
|
||||
ompi/tools/wrappers/mpicc-wrapper-data.txt
|
||||
ompi/tools/wrappers/mpic++-wrapper-data.txt
|
||||
ompi/tools/wrappers/mpif77-wrapper-data.txt
|
||||
ompi/tools/wrappers/mpif90-wrapper-data.txt
|
||||
ompi/tools/ortetools/Makefile
|
||||
ompi/tools/ompi-server/Makefile
|
||||
ompi/tools/ompi-probe/Makefile
|
||||
ompi/tools/ompi-profiler/Makefile
|
||||
|
||||
test/Makefile
|
||||
test/event/Makefile
|
||||
test/asm/Makefile
|
||||
test/class/Makefile
|
||||
test/support/Makefile
|
||||
test/threads/Makefile
|
||||
test/peruse/Makefile
|
||||
])
|
||||
|
||||
m4_include([opal/config/config_files.m4])
|
||||
m4_ifdef([project_orte], [m4_include([orte/config/config_files.m4])])
|
||||
m4_ifdef([project_ompi], [m4_include([ompi/config/config_files.m4])])
|
||||
|
||||
AC_OUTPUT
|
||||
|
||||
@ -110,6 +110,7 @@ EXTRA_DIST = \
|
||||
platform/cisco/macosx-dynamic-optimized.conf \
|
||||
platform/cisco/hlfr/debug \
|
||||
platform/cisco/hlfr/debug.conf \
|
||||
platform/cisco/hlfr/ebuild \
|
||||
platform/cisco/hlfr/optimized \
|
||||
platform/cisco/hlfr/optimized.conf \
|
||||
platform/cisco/ludd-1/debug \
|
||||
|
||||
@ -46,6 +46,8 @@ aclocal.m4
|
||||
autom4te.cache
|
||||
Makefile
|
||||
static-components.h
|
||||
project_list.m4
|
||||
orte_wrapper_script
|
||||
*~
|
||||
*\\\#/;
|
||||
|
||||
|
||||
29
contrib/platform/cisco/hlfr/ebuild
Обычный файл
29
contrib/platform/cisco/hlfr/ebuild
Обычный файл
@ -0,0 +1,29 @@
|
||||
enable_dlopen=no
|
||||
enable_mem_debug=no
|
||||
enable_mem_profile=no
|
||||
enable_debug_symbols=yes
|
||||
enable_binaries=yes
|
||||
enable_heterogeneous=no
|
||||
enable_debug=yes
|
||||
enable_shared=yes
|
||||
enable_static=no
|
||||
enable_memchecker=no
|
||||
enable_ipv6=no
|
||||
enable_mpi_f77=no
|
||||
enable_mpi_f90=no
|
||||
enable_mpi_cxx=no
|
||||
enable_mpi_cxx_seek=no
|
||||
enable_cxx_exceptions=no
|
||||
enable_ft_thread=no
|
||||
enable_per_user_config_files=no
|
||||
enable_script_wrapper_compilers=yes
|
||||
enable_multicast=yes
|
||||
enable_monitoring=yes
|
||||
enable_orterun_prefix_by_default=yes
|
||||
enable_io_romio=no
|
||||
enable_mca_no_build=carto,crs,routed-linear,routed-direct,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-openib,btl-sm,filem,plm-tm,pml-csum
|
||||
enable_contrib_no_build=libnbc,vt
|
||||
with_tm=no
|
||||
with_openib=no
|
||||
with_devel_headers=yes
|
||||
with_slurm=no
|
||||
49
ompi/config/config_files.m4
Обычный файл
49
ompi/config/config_files.m4
Обычный файл
@ -0,0 +1,49 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2009 Cisco Systems, Inc. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
# This file is m4_included in the top-level configure.ac only if we
|
||||
# are building the ompi project. You cannot put an AC_CONFIG_FILES in
|
||||
# an AC_DEFUN that is conditionally called (because Autoconf will
|
||||
# still process the AC_CONFIG_FILES unconditionally); you can only m4
|
||||
# include the file or not.
|
||||
|
||||
AC_CONFIG_FILES([
|
||||
ompi/Makefile
|
||||
ompi/etc/Makefile
|
||||
ompi/include/Makefile
|
||||
ompi/include/mpif.h
|
||||
ompi/include/mpif-config.h
|
||||
|
||||
ompi/datatype/Makefile
|
||||
ompi/debuggers/Makefile
|
||||
|
||||
ompi/mpi/c/Makefile
|
||||
ompi/mpi/c/profile/Makefile
|
||||
ompi/mpi/cxx/Makefile
|
||||
ompi/mpi/f77/Makefile
|
||||
ompi/mpi/f77/profile/Makefile
|
||||
ompi/mpi/f90/Makefile
|
||||
ompi/mpi/f90/fortran_kinds.sh
|
||||
ompi/mpi/f90/fortran_sizes.h
|
||||
ompi/mpi/f90/scripts/Makefile
|
||||
|
||||
ompi/tools/ompi_info/Makefile
|
||||
ompi/tools/wrappers/Makefile
|
||||
ompi/tools/wrappers/mpicc-wrapper-data.txt
|
||||
ompi/tools/wrappers/mpic++-wrapper-data.txt
|
||||
ompi/tools/wrappers/mpif77-wrapper-data.txt
|
||||
ompi/tools/wrappers/mpif90-wrapper-data.txt
|
||||
ompi/tools/ortetools/Makefile
|
||||
ompi/tools/ompi-server/Makefile
|
||||
ompi/tools/ompi-probe/Makefile
|
||||
ompi/tools/ompi-profiler/Makefile
|
||||
|
||||
test/peruse/Makefile
|
||||
])
|
||||
29
ompi/config/ompi_setup_contrib.m4
Обычный файл
29
ompi/config/ompi_setup_contrib.m4
Обычный файл
@ -0,0 +1,29 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2004-2009 The Trustees of Indiana University and Indiana
|
||||
# University Research and Technology
|
||||
# Corporation. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The University of Tennessee and The University
|
||||
# of Tennessee Research Foundation. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2004-2007 High Performance Computing Center Stuttgart,
|
||||
# University of Stuttgart. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The Regents of the University of California.
|
||||
# All rights reserved.
|
||||
# Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2008 Sun Microsystems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2007 Los Alamos National Security, LLC. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2009 Oak Ridge National Labs. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
AC_DEFUN([OMPI_SETUP_CONTRIB],[
|
||||
ompi_show_title "Contributed software setup"
|
||||
|
||||
OMPI_CONTRIB
|
||||
])
|
||||
@ -56,6 +56,10 @@ AC_DEFUN([OMPI_SETUP_CXX],[
|
||||
_OMPI_CXX_CHECK_BUILTIN
|
||||
|
||||
_OMPI_CXX_CHECK_2D_CONST_CAST
|
||||
|
||||
AM_CONDITIONAL(WANT_MPI_CXX_BINDINGS, [test "$WANT_MPI_CXX_SUPPORT" = 1])
|
||||
AC_DEFINE_UNQUOTED(OMPI_WANT_CXX_BINDINGS, $WANT_MPI_CXX_SUPPORT,
|
||||
[Whether we want MPI C++ support or not])
|
||||
])
|
||||
|
||||
# _OMPI_SETUP_CXX_COMPILER()
|
||||
52
ompi/config/ompi_setup_debugger_flags.m4
Обычный файл
52
ompi/config/ompi_setup_debugger_flags.m4
Обычный файл
@ -0,0 +1,52 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2004-2009 The Trustees of Indiana University and Indiana
|
||||
# University Research and Technology
|
||||
# Corporation. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The University of Tennessee and The University
|
||||
# of Tennessee Research Foundation. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2004-2007 High Performance Computing Center Stuttgart,
|
||||
# University of Stuttgart. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The Regents of the University of California.
|
||||
# All rights reserved.
|
||||
# Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2008 Sun Microsystems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2007 Los Alamos National Security, LLC. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2009 Oak Ridge National Labs. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
AC_DEFUN([OMPI_SETUP_DEBUGGER_FLAGS],[
|
||||
#
|
||||
# Do a final process of the CFLAGS to make a WITHOUT_OPTFLAGS version.
|
||||
# We need this so that we can guarantee to build the TotalView stuff
|
||||
# with -g and nothing else.
|
||||
#
|
||||
|
||||
OMPI_MAKE_STRIPPED_FLAGS($CFLAGS)
|
||||
CFLAGS_WITHOUT_OPTFLAGS="$s_result"
|
||||
if test "$with_tv_debug_flags" != ""; then
|
||||
TOTALVIEW_DEBUG_FLAGS="$with_tv_debug_flags"
|
||||
else
|
||||
# Tweak the compiler flags passed to orterun for Sun Studio SPARC
|
||||
# https://svn.open-mpi.org/trac/ompi/ticket/1448
|
||||
if test "x$ompi_cv_c_compiler_vendor" = "xsun" -a -n "`echo $host | $GREP sparc`"; then
|
||||
TOTALVIEW_DEBUG_FLAGS="-g -xO0"
|
||||
else
|
||||
TOTALVIEW_DEBUG_FLAGS="-g"
|
||||
fi
|
||||
fi
|
||||
AC_MSG_CHECKING([which of CFLAGS are ok for TotalView modules])
|
||||
AC_MSG_RESULT([$CFLAGS_WITHOUT_OPTFLAGS])
|
||||
AC_MSG_CHECKING([extra CFLAGS for TotalView modules])
|
||||
AC_MSG_RESULT([$TOTALVIEW_DEBUG_FLAGS])
|
||||
|
||||
AC_SUBST(CFLAGS_WITHOUT_OPTFLAGS)
|
||||
AC_SUBST(TOTALVIEW_DEBUG_FLAGS)
|
||||
])
|
||||
32
ompi/config/ompi_setup_mpi_ext.m4
Обычный файл
32
ompi/config/ompi_setup_mpi_ext.m4
Обычный файл
@ -0,0 +1,32 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2004-2009 The Trustees of Indiana University and Indiana
|
||||
# University Research and Technology
|
||||
# Corporation. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The University of Tennessee and The University
|
||||
# of Tennessee Research Foundation. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2004-2007 High Performance Computing Center Stuttgart,
|
||||
# University of Stuttgart. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The Regents of the University of California.
|
||||
# All rights reserved.
|
||||
# Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2008 Sun Microsystems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2007 Los Alamos National Security, LLC. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2009 Oak Ridge National Labs. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
AC_DEFUN([OMPI_SETUP_MPI_EXT],[
|
||||
ompi_show_title "Extended MPI interfaces setup"
|
||||
|
||||
OMPI_EXT
|
||||
|
||||
AC_DEFINE_UNQUOTED(OMPI_EXT_COMPONENTS, "$EXT_mpiext_ALL_COMPONENTS",
|
||||
[MPI Extended Interface Components])
|
||||
])
|
||||
226
ompi/config/ompi_setup_mpi_fortran.m4
Обычный файл
226
ompi/config/ompi_setup_mpi_fortran.m4
Обычный файл
@ -0,0 +1,226 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2004-2009 The Trustees of Indiana University and Indiana
|
||||
# University Research and Technology
|
||||
# Corporation. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The University of Tennessee and The University
|
||||
# of Tennessee Research Foundation. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2004-2007 High Performance Computing Center Stuttgart,
|
||||
# University of Stuttgart. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The Regents of the University of California.
|
||||
# All rights reserved.
|
||||
# Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2008 Sun Microsystems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2007 Los Alamos National Security, LLC. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2009 Oak Ridge National Labs. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
AC_DEFUN([OMPI_SETUP_MPI_FORTRAN],[
|
||||
|
||||
#-----------
|
||||
# Fortran 77
|
||||
#-----------
|
||||
|
||||
OMPI_SETUP_F77
|
||||
|
||||
# This allows us to mark bogus types, but still have them be a valid
|
||||
# [sentinel] value
|
||||
|
||||
AC_DEFINE([ompi_fortran_bogus_type_t], [int],
|
||||
[A bogus type that allows us to have sentinel type values that are still valid])
|
||||
|
||||
# We want to set the #define's for all of these, so invoke the macros
|
||||
# regardless of whether we have F77 support or not.
|
||||
OMPI_F77_CHECK([CHARACTER], [yes],
|
||||
[char, int32_t, int, int64_t, long long, long], [-1])
|
||||
|
||||
OMPI_F77_CHECK([LOGICAL], [yes],
|
||||
[char, int32_t, int, int64_t, long long, long], [-1])
|
||||
OMPI_F77_CHECK([LOGICAL*1], [yes],
|
||||
[char, int8_t, short, int32_t, int, int64_t, long long, long], [1])
|
||||
OMPI_F77_CHECK([LOGICAL*2], [yes],
|
||||
[short, int16_t, int32_t, int, int64_t, long long, long], [2])
|
||||
OMPI_F77_CHECK([LOGICAL*4], [yes],
|
||||
[int32_t, int, int64_t, long long, long], [4])
|
||||
OMPI_F77_CHECK([LOGICAL*8], [yes],
|
||||
[int, int64_t, long long, long], [8])
|
||||
|
||||
OMPI_F77_CHECK([INTEGER], [yes],
|
||||
[int32_t, int, int64_t, long long, long], [-1])
|
||||
OMPI_F77_CHECK([INTEGER*1], [no],
|
||||
[char, int8_t, short, int, int64_t, long long, long], [1])
|
||||
OMPI_F77_CHECK([INTEGER*2], [no],
|
||||
[short, int16_t, int32_t, int, int64_t, long long, long], [2])
|
||||
OMPI_F77_CHECK([INTEGER*4], [no],
|
||||
[int32_t, int, int64_t, long long, long], [4])
|
||||
OMPI_F77_CHECK([INTEGER*8], [no],
|
||||
[int, int64_t, long long, long], [8])
|
||||
OMPI_F77_CHECK([INTEGER*16], [no],
|
||||
[int, int64_t, long long, long], [16])
|
||||
|
||||
OMPI_F77_CHECK([REAL], [yes],
|
||||
[float, double, long double], [-1])
|
||||
OMPI_F77_CHECK([REAL*2], [no],
|
||||
[float, double, long double], [2])
|
||||
OMPI_F77_CHECK([REAL*4], [no],
|
||||
[float, double, long double], [4])
|
||||
OMPI_F77_CHECK([REAL*8], [no],
|
||||
[float, double, long double], [8])
|
||||
OMPI_F77_CHECK([REAL*16], [no],
|
||||
[float, double, long double], [16])
|
||||
|
||||
# In some compilers, the bit representation of REAL*16 is not the same
|
||||
# as the C counterpart that we found. If this is the case, then we
|
||||
# want to disable reduction support for MPI_REAL16 (per ticket #1603).
|
||||
OMPI_F77_CHECK_REAL16_C_EQUIV
|
||||
|
||||
OMPI_F77_CHECK([DOUBLE PRECISION], [yes],
|
||||
[float, double, long double], [-1])
|
||||
|
||||
OMPI_F77_CHECK([COMPLEX], [yes], [], [-1])
|
||||
|
||||
# The complex*N tests are a bit different (note: the complex tests are
|
||||
# the same as all the rest, because complex is a composite of two
|
||||
# reals, which we *have* to have. It's only the complex*N tests that
|
||||
# are different). The fortran complex types are composites of the
|
||||
# real*(N/2) types. So for us to support complex*N, two conditions
|
||||
# must be true:
|
||||
#
|
||||
# a) we must support real*(N/2) (i.e., compiler supports it and we
|
||||
# have a back-end C type for it)
|
||||
# b) compiler supports complex*N
|
||||
|
||||
OMPI_F77_CHECK([COMPLEX*8], [no], [], [8])
|
||||
OMPI_F77_CHECK([COMPLEX*16], [no], [], [16])
|
||||
OMPI_F77_CHECK([COMPLEX*32], [no], [], [32])
|
||||
|
||||
# Regardless of whether we have fortran bindings, or even a fortran
|
||||
# compiler, get the max value for a fortran MPI handle (this macro
|
||||
# handles the case where we don't have a fortran compiler).
|
||||
|
||||
OMPI_F77_GET_FORTRAN_HANDLE_MAX
|
||||
|
||||
#
|
||||
# Check for Fortran compilers value of TRUE and for the correct assumption
|
||||
# on LOGICAL for conversion into what C considers to be a true value
|
||||
#
|
||||
OMPI_F77_GET_VALUE_TRUE
|
||||
OMPI_F77_CHECK_LOGICAL_ARRAY
|
||||
|
||||
#
|
||||
# There are 2 layers to the MPI f77 layer. The only extra thing that
|
||||
# determine f77 bindings is that fortran can be disabled by user. In
|
||||
# such cases, we need to not build the target at all. One layer
|
||||
# generates MPI_f77* bindings. The other layer generates PMPI_f77*
|
||||
# bindings. The following conditions determine whether each (or both)
|
||||
# these layers are built.
|
||||
#
|
||||
# Superceeding clause:
|
||||
# - fortran77 bindings should be enabled, else everything is
|
||||
# disabled
|
||||
# 1. MPI_f77* bindings are needed if:
|
||||
# - Profiling is not required
|
||||
# - Profiling is required but weak symbols are not
|
||||
# supported
|
||||
# 2. PMPI_* bindings are needed if profiling is required. Hence we
|
||||
# define 2 conditionals which tell us whether each of these layers
|
||||
# need to be built or NOT
|
||||
#
|
||||
AM_CONDITIONAL(WANT_MPI_F77_BINDINGS_LAYER,
|
||||
test \( "$WANT_MPI_PROFILING" = 0 -o "$OMPI_PROFILING_COMPILE_SEPARATELY" = 1 \) -a "$OMPI_WANT_F77_BINDINGS" = 1)
|
||||
|
||||
AM_CONDITIONAL(WANT_PMPI_F77_BINDINGS_LAYER,
|
||||
test "$OMPI_WANT_F77_BINDINGS" = 1 -a "$WANT_MPI_PROFILING" = 1)
|
||||
|
||||
#-----------
|
||||
# Fortran 90
|
||||
#-----------
|
||||
|
||||
OMPI_SETUP_F90
|
||||
|
||||
# Look for the fortran module compiler flag
|
||||
OMPI_F90_FIND_MODULE_INCLUDE_FLAG
|
||||
|
||||
# Look for all the types
|
||||
OMPI_F90_IKINDS=""
|
||||
OMPI_F90_RKINDS=""
|
||||
OMPI_F90_CKINDS=""
|
||||
|
||||
OMPI_F90_CHECK([CHARACTER])
|
||||
|
||||
# LOGICAL and friends
|
||||
OMPI_F90_CHECK([LOGICAL])
|
||||
OMPI_F90_CHECK([LOGICAL*1], [1])
|
||||
OMPI_F90_CHECK([LOGICAL*2], [2])
|
||||
OMPI_F90_CHECK([LOGICAL*4], [4])
|
||||
OMPI_F90_CHECK([LOGICAL*8], [8])
|
||||
|
||||
# INTEGER and friends
|
||||
OMPI_F90_CHECK([INTEGER])
|
||||
OMPI_F90_CHECK([INTEGER*1], [1])
|
||||
OMPI_F90_CHECK([INTEGER*2], [2])
|
||||
OMPI_F90_CHECK([INTEGER*4], [4])
|
||||
OMPI_F90_CHECK([INTEGER*8], [8])
|
||||
OMPI_F90_CHECK([INTEGER*16], [16])
|
||||
|
||||
# REAL, DOUBLE PRECISION, REAL*4, *8, *16
|
||||
OMPI_F90_CHECK([REAL])
|
||||
OMPI_F90_CHECK([REAL*2], [2])
|
||||
OMPI_F90_CHECK([REAL*4], [4])
|
||||
OMPI_F90_CHECK([REAL*8], [8])
|
||||
OMPI_F90_CHECK([REAL*16], [16])
|
||||
OMPI_F90_CHECK([DOUBLE PRECISION])
|
||||
|
||||
# COMPLEX, DOUBLE COMPLEX, COMPLEX*8, *16, *32
|
||||
OMPI_F90_CHECK([COMPLEX])
|
||||
OMPI_F90_CHECK([COMPLEX*8], [8])
|
||||
OMPI_F90_CHECK([COMPLEX*16], [16])
|
||||
OMPI_F90_CHECK([COMPLEX*32], [32])
|
||||
OMPI_F90_CHECK([DOUBLE COMPLEX])
|
||||
|
||||
AC_SUBST(OMPI_F90_IKINDS)
|
||||
AC_SUBST(OMPI_F90_RKINDS)
|
||||
AC_SUBST(OMPI_F90_CKINDS)
|
||||
|
||||
# get kind value for Fortran MPI_INTEGER_KIND (corresponding to
|
||||
# whatever is the same size as a F77 INTEGER -- for the
|
||||
# most-likely-will-never-occur case where F77 INTEGER is smaller than
|
||||
# an F90 INTEGER; see MPI-2 4.12.6.5
|
||||
if test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "2"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 4, OMPI_MPI_INTEGER_KIND)
|
||||
elif test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "4"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 9, OMPI_MPI_INTEGER_KIND)
|
||||
elif test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "8"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 18, OMPI_MPI_INTEGER_KIND)
|
||||
elif test "$OMPI_SIZEOF_FORTRAN_INTEGER" = "16"; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_INTEGER_KIND, 19, OMPI_MPI_INTEGER_KIND)
|
||||
AC_MSG_ERROR([Cannot support Fortran MPI_INTEGER_KIND!])
|
||||
fi
|
||||
AC_SUBST(OMPI_MPI_INTEGER_KIND)
|
||||
|
||||
# get kind value for Fortran MPI_ADDRESS_KIND (corresponding to
|
||||
# whatever is big enough to hold (void*))
|
||||
if test $ac_cv_sizeof_void_p = 2 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 4, OMPI_MPI_ADDRESS_KIND)
|
||||
elif test $ac_cv_sizeof_void_p = 4 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 9, OMPI_MPI_ADDRESS_KIND)
|
||||
elif test $ac_cv_sizeof_void_p = 8 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 18, OMPI_MPI_ADDRESS_KIND)
|
||||
elif test $ac_cv_sizeof_void_p = 16 ; then
|
||||
OMPI_F90_GET_INT_KIND(MPI_ADDRESS_KIND, 19, OMPI_MPI_ADDRESS_KIND)
|
||||
else
|
||||
AC_MSG_ERROR([Cannot support Fortran MPI_ADDRESS_KIND!])
|
||||
fi
|
||||
AC_SUBST(OMPI_MPI_ADDRESS_KIND)
|
||||
|
||||
# get kind value for Fortran MPI_OFFSET_KIND (corresponding to INTEGER*8)
|
||||
OMPI_F90_GET_INT_KIND(MPI_OFFSET_KIND, 18, OMPI_MPI_OFFSET_KIND)
|
||||
AC_SUBST(OMPI_MPI_OFFSET_KIND)
|
||||
])
|
||||
52
ompi/config/ompi_setup_mpi_profiling.m4
Обычный файл
52
ompi/config/ompi_setup_mpi_profiling.m4
Обычный файл
@ -0,0 +1,52 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2004-2009 The Trustees of Indiana University and Indiana
|
||||
# University Research and Technology
|
||||
# Corporation. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The University of Tennessee and The University
|
||||
# of Tennessee Research Foundation. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2004-2007 High Performance Computing Center Stuttgart,
|
||||
# University of Stuttgart. All rights reserved.
|
||||
# Copyright (c) 2004-2005 The Regents of the University of California.
|
||||
# All rights reserved.
|
||||
# Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2008 Sun Microsystems, Inc. All rights reserved.
|
||||
# Copyright (c) 2006-2007 Los Alamos National Security, LLC. All rights
|
||||
# reserved.
|
||||
# Copyright (c) 2009 Oak Ridge National Labs. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
# OMPI-specific configuration
|
||||
|
||||
AC_DEFUN([OMPI_SETUP_MPI_PROFILING],[
|
||||
# There are 2 layers to the MPI Language binidings One layer
|
||||
# generates MPI_* bindings. The other layer generates PMPI_*
|
||||
# bindings. The following conditions determine whether each (or
|
||||
# both) these layers are built.
|
||||
# 1. MPI_* bindings are needed if:
|
||||
# - Profiling is not required
|
||||
# - Profiling is required but weak symbols are not
|
||||
# supported
|
||||
# 2. PMPI_* bindings are needed if profiling is required. Hence we
|
||||
# define 2 conditionals which tell us whether each of these layers
|
||||
# need to be built or NOT
|
||||
#
|
||||
|
||||
AM_CONDITIONAL(WANT_MPI_BINDINGS_LAYER,
|
||||
test "$WANT_MPI_PROFILING" = 0 -o "$OMPI_PROFILING_COMPILE_SEPARATELY" = 1)
|
||||
|
||||
AM_CONDITIONAL(WANT_PMPI_BINDINGS_LAYER,
|
||||
test "$WANT_MPI_PROFILING" = 1)
|
||||
AM_CONDITIONAL(COMPILE_PROFILING_SEPARATELY,
|
||||
test "$OMPI_PROFILING_COMPILE_SEPARATELY" = 1)
|
||||
AC_DEFINE_UNQUOTED(OMPI_ENABLE_MPI_PROFILING, $WANT_MPI_PROFILING,
|
||||
[Whether we want MPI profiling or not])
|
||||
AC_DEFINE_UNQUOTED(OPAL_HAVE_WEAK_SYMBOLS, $OPAL_C_HAVE_WEAK_SYMBOLS,
|
||||
[Whether we have weak symbols or not])
|
||||
])
|
||||
@ -1,5 +1,13 @@
|
||||
#!/usr/bin/perl -w
|
||||
# -*- perl -*-
|
||||
#
|
||||
# Copyright (c) 2009 Cisco Systems, Inc. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
use File::Basename;
|
||||
use File::Spec::Functions;
|
||||
@ -7,7 +15,7 @@ use File::Spec::Functions;
|
||||
my $includedir = "@OMPI_WRAPPER_INCLUDEDIR@";
|
||||
my $libdir = "@OMPI_WRAPPER_LIBDIR@";
|
||||
|
||||
# obey the OPAL_DESTDIR environmant variable
|
||||
# obey the OPAL_DESTDIR environment variable
|
||||
if (exists($ENV{'OPAL_DESTDIR'})
|
||||
&& defined($ENV{'OPAL_DESTDIR'})
|
||||
&& (length($ENV{'OPAL_DESTDIR'}) > 0)) {
|
||||
|
||||
30
opal/config/config_files.m4
Обычный файл
30
opal/config/config_files.m4
Обычный файл
@ -0,0 +1,30 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2009 Cisco Systems, Inc. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
# This file is m4_included in the top-level configure.ac
|
||||
|
||||
AC_CONFIG_FILES([
|
||||
opal/Makefile
|
||||
opal/etc/Makefile
|
||||
opal/include/Makefile
|
||||
opal/asm/Makefile
|
||||
opal/datatype/Makefile
|
||||
opal/event/Makefile
|
||||
opal/event/compat/Makefile
|
||||
opal/event/compat/sys/Makefile
|
||||
opal/util/Makefile
|
||||
opal/util/keyval/Makefile
|
||||
opal/mca/base/Makefile
|
||||
opal/tools/wrappers/Makefile
|
||||
opal/tools/wrappers/opalcc-wrapper-data.txt
|
||||
opal/tools/wrappers/opalc++-wrapper-data.txt
|
||||
opal/tools/opal-checkpoint/Makefile
|
||||
opal/tools/opal-restart/Makefile
|
||||
])
|
||||
@ -10,7 +10,7 @@ dnl Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
|
||||
dnl University of Stuttgart. All rights reserved.
|
||||
dnl Copyright (c) 2004-2005 The Regents of the University of California.
|
||||
dnl All rights reserved.
|
||||
dnl Copyright (c) 2006-2008 Cisco Systems, Inc. All rights reserved.
|
||||
dnl Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved.
|
||||
dnl Copyright (c) 2007 Sun Microsystems, Inc. All rights reserved.
|
||||
dnl Copyright (c) 2009 IBM Corporation. All rights reserved.
|
||||
dnl Copyright (c) 2009 Los Alamos National Security, LLC. All rights
|
||||
@ -415,6 +415,7 @@ AC_ARG_ENABLE([script-wrapper-compilers],
|
||||
AM_CONDITIONAL([OMPI_WANT_SCRIPT_WRAPPER_COMPILERS],
|
||||
[test "$enable_script_wrapper_compilers" = "yes"])
|
||||
AC_CONFIG_FILES([ompi/tools/wrappers/ompi_wrapper_script], [chmod +x ompi/tools/wrappers/ompi_wrapper_script])
|
||||
AC_CONFIG_FILES([orte/tools/wrappers/orte_wrapper_script], [chmod +x orte/tools/wrappers/orte_wrapper_script])
|
||||
|
||||
#
|
||||
# Support per-user config files?
|
||||
34
orte/config/config_files.m4
Обычный файл
34
orte/config/config_files.m4
Обычный файл
@ -0,0 +1,34 @@
|
||||
# -*- shell-script -*-
|
||||
#
|
||||
# Copyright (c) 2009 Cisco Systems, Inc. All rights reserved.
|
||||
# $COPYRIGHT$
|
||||
#
|
||||
# Additional copyrights may follow
|
||||
#
|
||||
# $HEADER$
|
||||
#
|
||||
|
||||
# This file is m4_included in the top-level configure.ac only if we
|
||||
# are building the orte project. You cannot put an AC_CONFIG_FILES in
|
||||
# an AC_DEFUN that is conditionally called (because Autoconf will
|
||||
# still process the AC_CONFIG_FILES unconditionally); you can only m4
|
||||
# include the file or not.
|
||||
|
||||
AC_CONFIG_FILES([
|
||||
orte/Makefile
|
||||
orte/include/Makefile
|
||||
orte/etc/Makefile
|
||||
|
||||
orte/tools/orted/Makefile
|
||||
orte/tools/orterun/Makefile
|
||||
orte/tools/wrappers/Makefile
|
||||
orte/tools/wrappers/ortecc-wrapper-data.txt
|
||||
orte/tools/wrappers/ortec++-wrapper-data.txt
|
||||
orte/tools/orte-checkpoint/Makefile
|
||||
orte/tools/orte-iof/Makefile
|
||||
orte/tools/orte-restart/Makefile
|
||||
orte/tools/orte-ps/Makefile
|
||||
orte/tools/orte-clean/Makefile
|
||||
orte/tools/orte-top/Makefile
|
||||
orte/tools/orte-bootproxy/Makefile
|
||||
])
|
||||
@ -19,8 +19,12 @@
|
||||
|
||||
EXTRA_DIST = CMakeLists.txt
|
||||
|
||||
if PROJECT_OMPI
|
||||
REQUIRES_OMPI = peruse
|
||||
endif
|
||||
|
||||
# support needs to be first for dependencies
|
||||
SUBDIRS = support asm class threads peruse
|
||||
SUBDIRS = support asm class threads $(REQUIRES_OMPI)
|
||||
DIST_SUBDIRS = event $(SUBDIRS)
|
||||
|
||||
TESTS =
|
||||
|
||||
Загрузка…
Ссылка в новой задаче
Block a user