http://www.open-mpi.org/community/lists/users/2013/04/21689.php, the
assert in opal_datatype_is_contiguous_memory_layout() is not always
correct -- he supplied a test case where it was not valid,
essentially:
1. Call MPI_Type_create_indexed_block(0, ..., &newtype) and commit newtype
1. Call MPI_Type_create_resized(newtype, 0, nonzero_value, &resized) and commit resized
1. Call MPI_File_set_view with resized
This will eventually call opal_datatype_is_contiguous_memory_layout(),
and the assert will fail. After some consultation with George, it was
determined that the assert() is basically good, but it needs to also
check for (count != 0).
This commit was SVN r28398.
everything out before using it.
This is not in response to any known bug, but rather just a
pre-emptive, defensive move to help prevent bugs in code that forgets
to initialize a field.
This commit was SVN r28343.
representation is not correctly optimized (it is off by the extend).
During the data representation process, if the opportunity to merge several
items appear, we replace them with the new merged element. However, if one
of the components of this merged element was comming from a "loop representation"
then the new first element of this loop must have a displacement moved by the
extent of the loop.
This commit was SVN r28319.
Provide some nice error messages if we fail to set the limits. Since the user had to specifically request we set the limit, treat failure as an error-out situation.
This commit was SVN r28288.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
Other changes:
- Added a flag to the MCA variable system to indicate a variable should go away
when its group does. Both mca_base_framework_var_register() and
mca_base_component_var_register() set this flag.
Notes:
- mca_base_components_open is deprecated. It will be removed in a future commit.
- All frameworks should use MCA_BASE_FRAMEWORK_DECLARE to declare their
framework structure.
- All calls to framework open/close functions should be changed to use the
mca_base_framework_* functions.
- Instead of special-casing installdirs a flag was added to prevent calling
into the variable system when opening a framework.
- Ralph: Clarify the functional definition of the "register" function in the
MCA framework object - it had the same name as another function that does a
totally different thing.
- As per discussion with Ralph the behavior of mca_base_framework_register()
is to always call mca_base_framework_components_register() if the framework's
register function was successful. This removed the need for frameworks to
have to call this function directly.
This commit was SVN r28237.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
binding. This fix was included in the upstream 1.6 series, but not
the upstream 1.5 series, and was therefore missed when we brought
1.5.2 to OMPI.
This commit was SVN r28212.
The following SVN revision numbers were found above:
r28040 --> open-mpi/ompi@3d44f97572
At the same time, fix a minor issue where the init hook was being called twice, once by the libc malloc and once by our malloc by removing the call from our malloc.
This commit was SVN r28202.
library to multiple libraries that are implicitly sucked into the executable
as a dependency of libmpi. The initialize hook isn't visible to libc on some
linux distributions when it's in libopal and libopal isn't explicity linked
into the executable. The fix is to have a duplicate initialize hook in
libmpi as well as libopal. *sigh*.
This commit was SVN r28164.
A few changes were required to support this move:
1. the PMI component used to identify rte-related data (e.g., host name, bind level) and package them as a unit to reduce the number of PMI keys. This code was moved up to the ORTE layer as the OPAL layer has no understanding of these concepts. In addition, the component locally stored data based on process jobid/vpid - this could no longer be supported (see below for the solution).
2. the hash component was updated to use the new opal_identifier_t instead of orte_process_name_t as its index for storing data in the hash tables. Previously, we did a hash on the vpid and stored the data in a 32-bit hash table. In the revised system, we don't see a separate "vpid" field - we only have a 64-bit opaque value. The orte_process_name_t hash turned out to do nothing useful, so we now store the data in a 64-bit hash table. Preliminary tests didn't show any identifiable change in behavior or performance, but we'll have to see if a move back to the 32-bit table is required at some later time.
3. the db framework was a "select one" system. However, since the PMI component could no longer use its internal storage system, the framework has now been changed to a "select many" mode of operation. This allows the hash component to handle all internal storage, while the PMI component only handles pushing/pulling things from the PMI system. This was something we had planned for some time - when fetching data, we first check internal storage to see if we already have it, and then automatically go to the global system to look for it if we don't. Accordingly, the framework was provided with a custom query function used during "select" that lets you seperately specify the "store" and "fetch" ordering.
4. the ORTE grpcomm and ess/pmi components, and the nidmap code, were updated to work with the new db framework and to specify internal/global storage options.
No changes were made to the MPI layer, except for modifying the ORTE component of the OMPI/rte framework to support the new db framework.
This commit was SVN r28112.
* Clean up ${includedir} and ${libdir} for script wrapper compilers
* Update script wrapper compilers to work like the C wrapper compilers w.r.t static and dynamic linking
* Remove the ORTE script wrapper compilers since they didn't support the ${includedir} stuff and Ralph said they weren't used anymore.
This commit was SVN r28052.
processor_bind to see if we're bound to a single core.
If not, THEN check lgroup affinity. Already CMR'ed to
v1.6 (trac 3507) and fixed upstream in hwloc (r5295).
This commit was SVN r28040.
The following SVN revision numbers were found above:
r5295 --> open-mpi/ompi@6df8cb0f02
Leif would like to revamp the ARM support in a different way, and will
submit a patch to do so in the future.
This commit was SVN r27960.
The following SVN revision numbers were found above:
r27882 --> open-mpi/ompi@8649b5eece
flags, and mca flags are kept seperate until the very end. The main configure
wrapper flags should now be modified by using the OPAL_WRAPPER_FLAGS_ADD
macro. MCA components should either let <framework>_<component>_{LIBS,LDFLAGS}
be copied over OR set <framework>_<component>_WRAPPER_EXTRA_{LIBS,LDFLAGS}.
The situations in which WRAPPER CPPFLAGS can be set by MCA components was
made very small to match the one use case where it makes sense.
This commit was SVN r27950.
