This commit changes the underlying opal complex datatypes to match the
C99 types: float _Complex, double _Complex, and long double _Complex. The
fortran and C++ types now are aliases to these basic types instead of
structure types. The operators in ompi/mca/op/base now work on only the
C99 types and the fortran types use these operators if the fortran type
matches a C complex type (this should almost always be the case.)
C99 is not is use in both the datatype and operator code and should make
the code both cleaner and much less fragile.
This commit was SVN r29193.
the output of ompi_info.
A variable is disabled if its component will never be selected due to
a component selection parameter (eg. -mca btl self). The old behavior
of ompi_info was to not print these parameters at all. Now we print the
parameters. After some discussion with George it was decided that there
needed to be some way to see what parameters will not be used. This was
the comprimise.
This commit also fixes a bug and a typo in the pvar sytem. The enum_count
value in mca_base_pvar_dump was being used without being set. The full_name
in mca_base_pvar_t was not being used.
cmr=v1.7.3:ticket=trac:3734
This commit was SVN r29078.
The following Trac tickets were found above:
Ticket 3734 --> https://svn.open-mpi.org/trac/ompi/ticket/3734
memory hooks.
The MIC has a /dev/scif device and the host has /dev/mic/scif. I do not
know if this device exists when no MIC is connected.
cmr=v1.7.4:ticket=trac:3733:reviewer=jsquyres
This commit was SVN r29071.
The following Trac tickets were found above:
Ticket 3733 --> https://svn.open-mpi.org/trac/ompi/ticket/3733
and improve the behavior of ompi_info.
This commit changes the default behavior of ompi_info --all when a
level is not specified. Instead of assuming level 1 in this case we
now assume level 9. This change is due to feedback from the community
after the introduction of the --level option.
I also added a new option: --selected-only. This option will limit the
displayed variables to components that can be selected (ie. if there
is a selection parameter set-- btl self,sm)
cmr=v1.7.3:reviewer=jsquyres
This commit was SVN r29070.
is enabled and fix a bug in the handling of watermark performance
variables.
cmr=v1.7.3:ticket=trac:3725:reviewer=jsquyres
This commit was SVN r29068.
The following Trac tickets were found above:
Ticket 3725 --> https://svn.open-mpi.org/trac/ompi/ticket/3725
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
This creates a really bad scaling behavior. Users have found a nearly 20% launch time differential between mpirun and PMI, with PMI being the slower method. Some of the problem is attributable to poor exchange algorithms in RM's like Slurm and Alps, but we make things worse by calling "get" so many times.
Nathan (with a tad advice from me) has attempted to alleviate this problem by reducing the number of "get" calls. This required the following changes:
* upon first request for data, have the OPAL db pmi component fetch and decode *all* the info from a given remote proc. It turned out we weren't caching the info, so we would continually request it and only decode the piece we needed for the immediate request. We now decode all the info and push it into the db hash component for local storage - and then all subsequent retrievals are fulfilled locally
* reduced the amount of data by eliminating the exchange of the OMPI_ARCH value if heterogeneity is not enabled. This was used solely as a check so we would error out if the system wasn't actually homogeneous, which was fine when we thought there was no cost in doing the check. Unfortunately, at large scale and with direct launch, there is a non-zero cost of making this test. We are open to finding a compromise (perhaps turning the test off if requested?), if people feel strongly about performing the test
* reduced the amount of RTE data being automatically fetched, and fetched the rest only upon request. In particular, we no longer immediately fetch the hostname (which is only used for error reporting), but instead get it when needed. Likewise for the RML uri as that info is only required for some (not all) environments. In addition, we no longer fetch the locality unless required, relying instead on the PMI clique info to tell us who is on our local node (if additional info is required, the fetch is performed when a modex_recv is issued).
Again, all this only impacts direct launch - all the info is provided when launched via mpirun as there is no added cost to getting it
Barring objections, we may move this (plus any required other pieces) to the 1.7 branch once it soaks for an appropriate time.
This commit was SVN r29040.
This commit reintroduces key compression into the pmi db. This feature
compresses the keys stored into the component into a small number of
PMI keys by serializing the data and base64 encoding the result. This
will avoid issues with Cray PMI which restricts us to ~ 3 PMI keys per
rank.
This commit was SVN r28993.
Add support for MPI_Count type and MPI_COUNT datatype and add the required
MPI-3 functions MPI_Get_elements_x, MPI_Status_set_elements_x,
MPI_Type_get_extent_x, MPI_Type_get_true_extent_x, and MPI_Type_size_x.
This commit adds only the C bindings. Fortran bindins will be added in
another commit. For now the MPI_Count type is define to have the same size
as MPI_Offset. The type is required to be at least as large as MPI_Offset
and MPI_Aint. The type was initially intended to be a ssize_t (if it was
the same size as a long long) but there were issues compiling romio with
that definition (despite the inclusion of stddef.h).
I updated the datatype engine to use size_t instead of uint32_t to support
large datatypes. This will require some review to make sure that 1) the
changes are beneficial, 2) nothing was broken by the change (I doubt
anything was), and 3) there are no performance regressions due to this
change.
Increase the maximum number of predifined datatypes to support MPI_Count
Put common get_elements code to ompi/datatype/ompi_datatype_get_elements.c
Update MPI_Get_count to reflect changes in MPI-3 (return MPI_UNDEFINED when the count is too large for an int)
This commit was SVN r28932.
This commit adds an API for registering and querying performance
variables (mca_base_pvar) in the MCA base. The existing MCA variable
system API has been updated to reflect the new API: MCA variable
groups have performance variables, and new types have been added (double,
unsigned long long) to reflect what is required by the MPI_T
interface. Additionally, the MCA variable group code has been split
into its own set of files: mca_base_var_group.[ch].
Details of the new API can be found in doxygen comments in the header:
mca_base_pvar.h.
Other changes to the variable system:
- Use an opal_hash_table to speed up variable/group lookup.
- Clean up code associated with MCA variable types.
- Registered performance variables are printed by ompi_info -a. In the
future an option should be added to control this behavior.
Changes to OMPI:
- Added full support for the MPI_T performance variable interface.
This commit was SVN r28800.
(since this is used in the fast path) for when you ''know'' that there
will be a room available:
* Don't do the last_unoccupied_room check
* Return void
This commit was SVN r28757.
Add an option to ompi_info (-l, --level) that takes a number in the
interval (1,9). Only MCA variables up to this level will be printed.
The default level is 1.
Print the level as part of both the parsable and readable output.
This commit was SVN r28750.
sandbox team has informed me that they are getting rid of SANDBOX_PID
in the future and that using SANDBOX_ON would be preferred.
This commit was SVN r28708.
To resolve this situation, add the ability to specify a backend topology file that mpirun shall use for its mapping operations. Create a new "set_topology" function in opal hwloc to support it.
This commit was SVN r28682.
Chose the crc32 function present in opal/util/crc.c as the hash function. The
performance should be sufficient for most cases. If not we can always change
the function again.
This commit was SVN r28629.
of the original datatype are allowed (not in type map nor extent). Make it
clear in the code.
Allow 0-count cases to the contiguous memory check.
This commit was SVN r28568.
some relevant updates/new functionality in the opal/mca/hwloc and
orte/mca/rmaps bases. This work was mainly developed by Mellanox,
with a bunch of advice from Ralph Castain, and some minor advice from
Brice Goglin and Jeff Squyres.
Even though this is mainly Mellanox's work, Jeff is committing only
for logistical reasons (he holds the hg+svn combo tree, and can
therefore commit it directly back to SVN).
-----
Implemented distance-based mapping algorithm as a new "mindist"
component in the rmaps framework. It allows mapping processes by NUMA
due to PCI locality information as reported by the BIOS - from the
closest to device to furthest.
To use this algorithm, specify:
{{{mpirun --map-by dist:<device_name>}}}
where <device_name> can be mlx5_0, ib0, etc.
There are two modes provided:
1. bynode: load-balancing across nodes
1. byslot: go through slots sequentially (i.e., the first nodes are
more loaded)
These options are regulated by the optional ''span'' modifier; the
command line parameter looks like:
{{{mpirun --map-by dist:<device_name>,span}}}
So, for example, if there are 2 nodes, each with 8 cores, and we'd
like to run 10 processes, the mindist algorithm will place 8 processes
to the first node and 2 to the second by default. But if you want to
place 5 processes to each node, you can add a span modifier in your
command line to do that.
If there are two NUMA nodes on the node, each with 4 cores, and we run
6 processes, the mindist algorithm will try to find the NUMA closest
to the specified device, and if successful, it will place 4 processes
on that NUMA but leaving the remaining two to the next NUMA node.
You can also specify the number of cpus per MPI process. This option
is handled so that we map as many processes to the closest NUMA as we
can (number of available processors at the NUMA divided by number of
cpus per rank) and then go on with the next closest NUMA.
The default binding option for this mapping is bind-to-numa. It works
if you don't specify any binding policy. But if you specified binding
level that was "lower" than NUMA (i.e hwthread, core, socket) it would
bind to whatever level you specify.
This commit was SVN r28552.
in generated executables on systems that support it. Use
--disable-wrapper-rpath to disable this behavior. See text in
README about --disable-wrapper-rpath for more details.
This commit was SVN r28479.
The following Trac tickets were found above:
Ticket 376 --> https://svn.open-mpi.org/trac/ompi/ticket/376
added by hwloc's embedding so that it doesn't appear in
libhwloc_embedded.la (and therefore propogate all the way up to
libmpi.la).
Committed upstream in hwloc SVN r5588.
This commit was SVN r28457.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r5588
http://www.open-mpi.org/community/lists/users/2013/04/21689.php, the
assert in opal_datatype_is_contiguous_memory_layout() is not always
correct -- he supplied a test case where it was not valid,
essentially:
1. Call MPI_Type_create_indexed_block(0, ..., &newtype) and commit newtype
1. Call MPI_Type_create_resized(newtype, 0, nonzero_value, &resized) and commit resized
1. Call MPI_File_set_view with resized
This will eventually call opal_datatype_is_contiguous_memory_layout(),
and the assert will fail. After some consultation with George, it was
determined that the assert() is basically good, but it needs to also
check for (count != 0).
This commit was SVN r28398.
everything out before using it.
This is not in response to any known bug, but rather just a
pre-emptive, defensive move to help prevent bugs in code that forgets
to initialize a field.
This commit was SVN r28343.
representation is not correctly optimized (it is off by the extend).
During the data representation process, if the opportunity to merge several
items appear, we replace them with the new merged element. However, if one
of the components of this merged element was comming from a "loop representation"
then the new first element of this loop must have a displacement moved by the
extent of the loop.
This commit was SVN r28319.
Provide some nice error messages if we fail to set the limits. Since the user had to specifically request we set the limit, treat failure as an error-out situation.
This commit was SVN r28288.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
Other changes:
- Added a flag to the MCA variable system to indicate a variable should go away
when its group does. Both mca_base_framework_var_register() and
mca_base_component_var_register() set this flag.
Notes:
- mca_base_components_open is deprecated. It will be removed in a future commit.
- All frameworks should use MCA_BASE_FRAMEWORK_DECLARE to declare their
framework structure.
- All calls to framework open/close functions should be changed to use the
mca_base_framework_* functions.
- Instead of special-casing installdirs a flag was added to prevent calling
into the variable system when opening a framework.
- Ralph: Clarify the functional definition of the "register" function in the
MCA framework object - it had the same name as another function that does a
totally different thing.
- As per discussion with Ralph the behavior of mca_base_framework_register()
is to always call mca_base_framework_components_register() if the framework's
register function was successful. This removed the need for frameworks to
have to call this function directly.
This commit was SVN r28237.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
binding. This fix was included in the upstream 1.6 series, but not
the upstream 1.5 series, and was therefore missed when we brought
1.5.2 to OMPI.
This commit was SVN r28212.
The following SVN revision numbers were found above:
r28040 --> open-mpi/ompi@3d44f97572
At the same time, fix a minor issue where the init hook was being called twice, once by the libc malloc and once by our malloc by removing the call from our malloc.
This commit was SVN r28202.
library to multiple libraries that are implicitly sucked into the executable
as a dependency of libmpi. The initialize hook isn't visible to libc on some
linux distributions when it's in libopal and libopal isn't explicity linked
into the executable. The fix is to have a duplicate initialize hook in
libmpi as well as libopal. *sigh*.
This commit was SVN r28164.
A few changes were required to support this move:
1. the PMI component used to identify rte-related data (e.g., host name, bind level) and package them as a unit to reduce the number of PMI keys. This code was moved up to the ORTE layer as the OPAL layer has no understanding of these concepts. In addition, the component locally stored data based on process jobid/vpid - this could no longer be supported (see below for the solution).
2. the hash component was updated to use the new opal_identifier_t instead of orte_process_name_t as its index for storing data in the hash tables. Previously, we did a hash on the vpid and stored the data in a 32-bit hash table. In the revised system, we don't see a separate "vpid" field - we only have a 64-bit opaque value. The orte_process_name_t hash turned out to do nothing useful, so we now store the data in a 64-bit hash table. Preliminary tests didn't show any identifiable change in behavior or performance, but we'll have to see if a move back to the 32-bit table is required at some later time.
3. the db framework was a "select one" system. However, since the PMI component could no longer use its internal storage system, the framework has now been changed to a "select many" mode of operation. This allows the hash component to handle all internal storage, while the PMI component only handles pushing/pulling things from the PMI system. This was something we had planned for some time - when fetching data, we first check internal storage to see if we already have it, and then automatically go to the global system to look for it if we don't. Accordingly, the framework was provided with a custom query function used during "select" that lets you seperately specify the "store" and "fetch" ordering.
4. the ORTE grpcomm and ess/pmi components, and the nidmap code, were updated to work with the new db framework and to specify internal/global storage options.
No changes were made to the MPI layer, except for modifying the ORTE component of the OMPI/rte framework to support the new db framework.
This commit was SVN r28112.
* Clean up ${includedir} and ${libdir} for script wrapper compilers
* Update script wrapper compilers to work like the C wrapper compilers w.r.t static and dynamic linking
* Remove the ORTE script wrapper compilers since they didn't support the ${includedir} stuff and Ralph said they weren't used anymore.
This commit was SVN r28052.
processor_bind to see if we're bound to a single core.
If not, THEN check lgroup affinity. Already CMR'ed to
v1.6 (trac 3507) and fixed upstream in hwloc (r5295).
This commit was SVN r28040.
The following SVN revision numbers were found above:
r5295 --> open-mpi/ompi@6df8cb0f02
Leif would like to revamp the ARM support in a different way, and will
submit a patch to do so in the future.
This commit was SVN r27960.
The following SVN revision numbers were found above:
r27882 --> open-mpi/ompi@8649b5eece
flags, and mca flags are kept seperate until the very end. The main configure
wrapper flags should now be modified by using the OPAL_WRAPPER_FLAGS_ADD
macro. MCA components should either let <framework>_<component>_{LIBS,LDFLAGS}
be copied over OR set <framework>_<component>_WRAPPER_EXTRA_{LIBS,LDFLAGS}.
The situations in which WRAPPER CPPFLAGS can be set by MCA components was
made very small to match the one use case where it makes sense.
This commit was SVN r27950.
actually care if opal_pointer_array is limited to handle_max already passes
that in as the max_size during init, so don't need it there. The arch
constant was a bit more difficult, so pass that in during MPI init and
leave empty otherwise.
This is to help with the effort to allow building ompi against an external
opal or orte.
This commit was SVN r27817.
it that the others did: move the "I won!" code up into the POST_CONFIG
macro. Also, fix a long-standing typo when restoring the $CPPFLAGS (!).
This commit was SVN r27813.
STOP_AT_FIRST. And move the side-effect-inducing code in
hwloc142/configure.m4 up to POST_CONFIG.
Also change the priority of the external hwloc component to 90 so that
it is evaluated before the internal component (as a direct result of
changing to STOP_AT_FIRST).
This commit was SVN r27796.
The following SVN revision numbers were found above:
r27794 --> open-mpi/ompi@569a60c2de
event framework to STOP_AT_FIRST, and then moves a bunch of
side-effect-inducing code in the libevent2019 configure.m4 up to
POST_CONFIG.
== More detail ==
Change the event framework from STOP_AT_FIRST_PRIORITY to
STOP_AT_FIRST. This means that only one component can win (vs. all
STOP_AT_FIRST_PRIORITY, in which multiple components of the same
priority can all win).
You still need to ensure that there are no side-effects from the
winner, however, so check for winning during POST_CONFIG, and set
things like the base_include there.
This simplifies the configury quite a bit -- you don't have to assume
that mulitple components can win: zero or one components will win.
Also change the libevent 2019 priority to 50 so that some other
(developer-specific/local) component could win, if it wanted to.
This commit was SVN r27794.
party configure.in scripts to be configure.ac so that Automake stops
complaining about them.
This commit was SVN r27791.
The following SVN revision numbers were found above:
r27790 --> open-mpi/ompi@675a2f5c48
using the modex or RML to share sm initialization information, have node rank 0
create a file containing initialization information in a well-known place. Then
during add_procs, the rest of the node processes requiring sm BTL initialization
will just read from that file to complete their initialization.
This commit was SVN r27789.
Carns, change to use access(.., F_OK) instead of stat() to check for
the presence of files.
Also remove redundant check for FAKEROOTKEY, and update all comments
to match.
This commit was SVN r27785.
config/ directory. We split them apart a while ago in the hopes that
it would simplify things, but it didn't really (e.g., because there
were still some ompi/opal .m4 files in the top-level config/
directory, resulting in developer confusion where any given m4 macro
was defined).
So this commit consolidates them back into the top-level directory for
simplicity.
There's still (at least) two changes that would be nice to make:
1. Split any generated .m4 file (e.g., autogen-generated .m4 files)
into a separate directory somewhere so that a top-level -Iconfig/
will only get our explicitly defined macros, not the autogen stuff
(e.g., with libevent2019 needing to get the visibility macro, but
NOT all the autogen-generated inclusion of component configure.m4
files).
1. Change configure to be of the form:
{{{
# ...a small amount of preamble/setup...
OPAL_SETUP
m4_ifdef([project_orte], [ORTE_SETUP])
m4_ifdef([project_ompi], [OMPI_SETUP])
# ...a small amount of finishing stuff...
}}}
I doubt we'll ever get anything as clean as that, but that would be
the goal to shoot for.
This commit was SVN r27704.
additional functionality. Rationale (refs trac:3422):
* Normal MPI applications only ever use the MPI API. Hence, -lmpi is
sufficient (they'll never directly call ORTE or OPAL
functions). This is arguably the most common case.
* That being said, we do have some test programs (e.g., those in
orte/test/mpi) that call MPI functions but also call ORTE/OPAL
functions. I've also written the occasional MPI test program that
calls opal_output, for example (there even might be a few tests in
the IBM test suite that directly call ORTE/OPAL functions).
* Even though this is not a common case, these applications should
also compile/link with mpicc.
* So we should add a --openmpi:linkall option that will also link
in whatever is necessary to call ORTE/OPAL functions
* Yes, we could hard-code "-lopen-rte -lopen-pal" in Makefiles, but
we do reserve the right to change those library names and/or add
others someday, so it's better to abstract out the names and let
the wrapper supply whatever is necessary.
* ORTE programs, however, are different. They almost always call OPAL
functions (e.g., if they want to send a message, they must use the
OPAL DSS). As such, it seems like the ORTE programs should always
link in OPAL.
Therefore:
* Add undocumented --openmpi:linkall flag to the wrapper compilers.
See the comment in opal_wrapper.c for an explanation of what it
does. This flag is only intended for Open MPI developers -- not
end users. That's why it's undocumented.
* Update orte/test/mpi/Makefile.am to add --openmpi:linkall
* Make ortecc/ortec++'s wrapper data text files always explicitly
link in libopen-pal
This commit was SVN r27670.
The following SVN revision numbers were found above:
r27668 --> open-mpi/ompi@cf845897aa
The following Trac tickets were found above:
Ticket 3422 --> https://svn.open-mpi.org/trac/ompi/ticket/3422
1. Restore libopen-pal.la, libopen-rte.la, and libmpi.la to be
separate entities (i.e., don't have libopen-rte.la include
libopen-pal.la, and don't have libmpi.la include libopen-pal.la).
Yay!
1. Consequently, make the wrapper compilers look for flags indicating
that the user wants to compile statically (currently: -static,
!--static, -Bstatic, and "-Wl," in front of all of those). If it
is, follow a 6-way matrix for determinining which libraries to
list on the underlying command line.
1. To support that, add the name of a token static and dynamic
library to look for in each of the wrapper compiler data files.
1. Fix a long-standing typo in the opalcc wrapper data file.
This commit was SVN r27662.
The old behavior of mca_base_param_deregister could cause the indices of other mca parameters to change. This could potentially cause problems if a mca user saves and later references an affected index.
This commit was SVN r27633.
Reasoning: The old behavior was a little confusing. mca_base_components_open does not open an output stream so it is a little unexpected that mca_base_components_close does. To add to this several frameworks (that don't use mca_base_components_close) failed to close their output in the framework close function and others closed their output a second time. This change is an improvement to the symantics of mca_base_components_open/close as they are now symetric in their functionality.
This commit was SVN r27570.
pml/v:
- If vprotocol is not being used vprotocol_include_list is leaked. Assume vprotocol never takes ownership (see below) and always free the string.
coll/ml:
- (patch verified) calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
- Need to free mca_coll_ml_component.config_file_name on component close.
btl/openib:
- calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
vprotocol/base:
- There was no way for pml/v to determine if vprotocol took ownership of vprotocol_include_list. Fix by always never ownership (use strdup).
mca/base:
- param_lookup will result in storage->stringval to be a newly allocated string if the mca parameter has a string value. ensure this string is always freed.
cmr:v1.7
This commit was SVN r27569.
It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
Not sure what happened here, but the resulting trunk wouldn't even configure. After spending time fixing that problem, I found it wouldn't compile due to multiple syntax errors that had been introduced in both the OPAL and OMPI layer. This raised questions as to the completeness of the work.
Given that the author is departing, I pinged Jeff about it and we agreed to revert this for now. Hopefully, it can either be fixed by the author prior to actual departure, or someone else can pick it up (now that it is in the history) and fix it.
This commit was SVN r27511.
The following SVN revision numbers were found above:
r27508 --> open-mpi/ompi@12c3c743de
r27509 --> open-mpi/ompi@79e4a8ca38
r27510 --> open-mpi/ompi@1ad5ff625a
opal_shmem_segment_create by testing whether or not the target mount has enough
space to accommodate the shared-memory backing store. Fixes trac:2827. Will work
with Shiqing to add Windows support (if required).
This commit was SVN r27433.
The following Trac tickets were found above:
Ticket 2827 --> https://svn.open-mpi.org/trac/ompi/ticket/2827
* Use the hwloc logical index, not the os_index. Fixes problems with
opal_hwloc_base_cset2str() output (e.g., --report-bindings output)
on machines where the os_index is not tightly packed in the range
![0, n-1]
This commit was SVN r27394.
ompi/mca/sbgp/basesmsocket
orte/mca/rmaps/lama
Remove stale configure.params files from the sbgp framework as the OMPI build system no longer looks at those files.
This commit was SVN r27377.
Cannot start the data clearing at the root object level as the root object has a different struct attached to userdata.
This commit was SVN r27357.
The following Trac tickets were found above:
Ticket 3322 --> https://svn.open-mpi.org/trac/ompi/ticket/3322
This now results in the procs being bound within their assigned location. It also causes us to use only the 0th HT on a core unless --use-hwthread-cpus has been specified (in which case, we use all the HTs in a core). Bind to core binds you to all HTs regardless - the --use-hwthread-cpus only impacts the oversubscribed determination and when binding to HT.
cmr:v1.7
This commit was SVN r27342.
We ran into a case where the OMPI SVN trunk grew a new acceptable MCA
parameter value, but this new value was not accepted on the v1.6
branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts
the value "silent", but on the older v1.6 branch, it doesn't). If you
set "hwloc_base_mem_bind_failure_action=silent" in the default MCA
params file and then accidentally ran with the v1.6 branch, every OMPI
executable (including ompi_info) just failed because hwloc_base_open()
would say "hey, 'silent' is not a valid value for
hwloc_base_mem_bind_failure_action!". Kaboom.
The only problem is that it didn't give you any indication of where
this value was being set. Quite maddening, from a user perspective.
So we changed the ompi_info handles this case. If any framework open
function return OMPI_ERR_BAD_PARAM (either because its base MCA params
got a bad value or because one of its component register/open
functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out
a warning that it received and error, and then dump out the parameters
that it has received so far in the framework that had a problem.
At a minimum, this will show the user the MCA param that had an error
(it's usually the last one), and ''where it was set from'' (so that
they can go fix it).
We updated ompi_info to check for O???_ERR_BAD_PARAM from each from
the framework opens. Also updated the doxygen docs in mca.h for this
O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS
and MCA_ERR_??? codes. Why? I think we used them in exactly one
place in the code base (mca_base_components_open.c). So we deleted
those and just used the normal OPAL_* codes instead.
While we were doing this, we also cleaned up a little memory
management during ompi_info/orte-info/opal-info finalization.
Valgrind still reports a truckload of memory still in use at ompi_info
termination, but they mostly look to be components not freeing
memory/resources properly (and outside the scope of this fix).
This commit was SVN r27306.
The following Trac tickets were found above:
Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
following:
* Provides a fixed number of resource slots (i.e., "hotel rooms").
* Allows one thing to occupy a resource slot at a time (i.e., each
hotel room can have an occupant check in to that room).
* Resource slots can be vacated at any time (i.e., occupants can
voluntarily check out of their hotel room).
* Resource slots can be occupied for a specific maximum amount of
time. If that time expires, the occupant is forcibly evicted and
the upper layer is notified via (libevent) callback (i.e., the maid
will kick an occupant of out of their room when their reservation
is over).
This class can be to be used for things like retransmission schemes
for unreliable transports. For example, a message sent on an
unreliable transport can be checked in to a hotel room. If an ACK for
that message is received, the message can be checked out. But if the
ACK is never received, the message will eventually be evicted from its
room and the upper layer will be notified that the message failed to
check out in time (i.e., that an ACK for that message was not received
in time).
Code using this class is currently being developed off-trunk, but will
be coming to SVN soon.
This commit was SVN r27067.
"num_app_ctx" - the number of app_contexts in the job
"first_rank" - the MPI rank of the first process in each app_context
"np" - the number of procs in each app_context
Still need clarification on the MPI_Init portion of the ticket. Specifically, does the ticket call for returning an error is someone calls MPI_Init more than once in a program? We set a flag to tell us that we have been initialized, but currently never check it.
This commit was SVN r27005.
distinguish between unknown ''options'' (i.e., command line options
that are registered and have some meaning) and unknown ''tokens''
(i.e., strings that do not begin with "-"). Hence, if you did:
mpirun --fo my_mpi_program
(when perhaps you meant to type "--foo", mpirun would complain that no
such executable "--fo" existed. That is ''correct,'' but perhaps not
completely useful. It is more accurate for mpirun to report that
there is no such "--fo" option.
This change to cmd_line.c makes it so that we will ''always'' report
errors regarding tokens that begin with "-".
This commit was SVN r26953.
* NULL's out the hwloc_obj_t->userdata in
hwloc_base_util.c:free_object() and
hwloc_base_util.c:opal_hwloc_base_free_topology() after it has been
OBJ_RELEASE'd.
* Adds a userdata field to opal_hwloc_topo_data_t. This field will
be used in an upcoming rmaps component ("lama") to cache some
associated data during hardware tree traversals.
This commit was SVN r26938.
particularly with respect to threading flags.
Before this change, the following scenario would fail (e.g., on Linux
with pthreads):
{{{
$ ./configure --disable-shared --enable-static ...
$ make clean install
$ cd examples
$ make clean all
}}}
Linking the Fortran examples would fail with missing pthread symbols.
This commit was SVN r26927.
