We didn't AC_LANG_PUSH(C++) before checking to see if the compiler
supports -finline-functions, meaning that configure used the C
compiler for these checkes, not the C++ compiler.
Due to #2999, we have to fix both opal_setup_cxx.m4 and
ompi_setup_cxx.m4.
cmr=v1.8.2:reviewer=rolfv
This commit was SVN r31651.
got linked together (work on one caused work in the other):
* Clean up a bunch of VAR_SCOPE issues in configure. This includes:
* Using VAR_SCOPE_PUSH and VAR_SCOPE_POP in more places
* Cleaning up the use of some shell variables (e.g., name them better)
* Add support for external libevent via
--with-libevent=<dir-to-libevent-install-tree>, as specifically
asked for by downstream packagers.
* Revamp how wrapper compiler RPATH (and RUNPATH) support is done.
The external libevent work exposed weakenesses in how the original
RPATH/RUNPATH work was done, so we had to re-do it to be a bit more
robust.
This work has not yet been tested on Solaris.
Refs trac:3694
This commit was SVN r29899.
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
flags, and mca flags are kept seperate until the very end. The main configure
wrapper flags should now be modified by using the OPAL_WRAPPER_FLAGS_ADD
macro. MCA components should either let <framework>_<component>_{LIBS,LDFLAGS}
be copied over OR set <framework>_<component>_WRAPPER_EXTRA_{LIBS,LDFLAGS}.
The situations in which WRAPPER CPPFLAGS can be set by MCA components was
made very small to match the one use case where it makes sense.
This commit was SVN r27950.
config/ directory. We split them apart a while ago in the hopes that
it would simplify things, but it didn't really (e.g., because there
were still some ompi/opal .m4 files in the top-level config/
directory, resulting in developer confusion where any given m4 macro
was defined).
So this commit consolidates them back into the top-level directory for
simplicity.
There's still (at least) two changes that would be nice to make:
1. Split any generated .m4 file (e.g., autogen-generated .m4 files)
into a separate directory somewhere so that a top-level -Iconfig/
will only get our explicitly defined macros, not the autogen stuff
(e.g., with libevent2019 needing to get the visibility macro, but
NOT all the autogen-generated inclusion of component configure.m4
files).
1. Change configure to be of the form:
{{{
# ...a small amount of preamble/setup...
OPAL_SETUP
m4_ifdef([project_orte], [ORTE_SETUP])
m4_ifdef([project_ompi], [OMPI_SETUP])
# ...a small amount of finishing stuff...
}}}
I doubt we'll ever get anything as clean as that, but that would be
the goal to shoot for.
This commit was SVN r27704.
Re-enable "./autogen.sh -no-ompi" again. If you -no-ompi, the entire OMPI
configury is skipped and the entire ompi/ subtree is not built. There's
some simple m4-isms that prune out the relevant parts.
I added ompi/config/, orte/config/, and opal/config/ directories. I moved a
bunch of m4 files from the top-level config/ dir into ompi/config/, and a few
into orte/config/.
Note that all 3 <project>/config directories have a config_files.m4 file. This
file contains the AC_CONFIG_FILES list for that project. The AC_CONFIG_FILES
call cannot be in an AC_DEFUN macro and conditionally called -- if it is
included at all, Autoconf will process it. Hence, these config_files.m4 files
don't AC_DEFUN -- they just have AC_CONFIG_FILES. m4_ifdef() is used to
conditionally include the files or not.
I moved a bunch of obvious OMPI-only m4 files from config/ to ompi/config/,
but I'm sure that there's more that could go. A ticket will be filed with
thoughts on future work in this area.
This commit was SVN r22113.
* No need for OPAL_SIZEOF_BOOL and OPAL_SIZEOF_INT in comm_inln.h --
just use sizeof()
* Fix logic in ompi_setup_cxx.m4 to account for the case where we
''do'' have a C++ compiler (duh!!)
* Fix spelling error in a shell variable that ended up making a
bad/empty #define
This should bring the trunk back to being functional. Sorry for the
interruption, folks...
This commit was SVN r21758.
The following SVN revision numbers were found above:
r21755 --> open-mpi/ompi@90d6491737
C++ compiler in configure. If we have a C++ compiler, then the MPI
C++ bindings are built by default. If we don't have a C++ compiler,
then the MPI C++ bindings are not built by default.
--enable-mpi-cxx will now force an error if there is no C++ compiler
available. --disable-mpi-cxx (or the lack of a C++ compiler) will now
disable many of the C++ compiler checks in configure.
Note that there are a few items to clean up regarding the difference
between C's _Bool type and C++'s bool type. Right now, we assume that
they are the same. But they aren't, and they shouldn't be treated as
such. This cleanup will be forced in MPI-2.2 with the introduction of
the MPI_C_BOOL MPI datatype.
This commit was SVN r21755.
svn merge -r 19823:19821 https://svn.open-mpi.org/svn/ompi/trunk ./
I copied the config directory in another location, and the original
.svn directory was replaced by the Open MPI one ... As a result my
first commit, applied the changes on the Open MPI trunk instead of
the other project.
This commit was SVN r19824.
(this was missed in #1585). Also, fix a long-standing problem that
the F90 wrapper compilers were using the F77 wrapper compiler flags.
This commit was SVN r19819.
compilers as well. Not doing this was causing problems with
MPI::ERRORS_THROW_EXCEPTIONS with gcc in 32 bit (but not 64 bit!).
* Ensure that the C and Fortran compilers actually like the C++
exceptions flags. If not, currently just abort. Let's see if
anyone complains about this -- I doubt they will because a) C++
exception support is not enabled by default, and b) I think C++
exceptions really only make sense within the same compiler family.
This commit was SVN r19783.
compiler warnings starting with -Wno- to recognize (if there are no
other warnings.
Try it with Your favorite warning, such as -Wno-britney will not
fail, while it will be recognized as faulty, if You also pass on with
-Wno-britney -Wspears....
This commit was SVN r18070.
<prog>`}}} in `configure`. It is preferable to simply using {{{`which
<prog>`}}} because backticks (`) (aka backquotes) invoke a sub-shell
which may source a "noisy" `~/.whatever` file, and we do not want the
error messages to be part of the assignment in {{{foo=`which
<prog>`}}}.
This commit was SVN r16955.
* Check that the C++, Fortran 77, and Objective C comilers emit code
that can link against object files emitted by the C compiler.
Moves some built / run time errors to configure time, which is
nice and should help with the debugging
* Remove unneeded -F option when building the XGrid components,
which started causing problems with LT 2.0.
* Try to use the XGridFoundation library, rather than just seeing
if we can give -framework XGridFoundation. Should make the
test slightly more accurate
* Don't assume XGrid is unavailable on 64 bit platforms, as that
won't be true on Leopard
* Require AM 1.10 or newer if using AC 2.60 or newer, so that
we don't have a split of AC supporting Objective C and AM
not doing so
This commit was SVN r12701.
for prefetch and branch prediction work. A non-happy compiler could
just think these were functions and we wouldn't get the error, because
we didn't try to link.
Refs trac:287
This commit was SVN r11333.
The following Trac tickets were found above:
Ticket 287 --> https://svn.open-mpi.org/trac/ompi/ticket/287
before checking if we are able to compile the test program. This is required
for windows as the C++ conftest.c file generated by configure cannot be
compiled with the Microsoft cl.exe compiler (because of the exit function
prototype). So if we detect a vendor equal to microsoft we will assume
that the compiler is correctly installed (which is true on Windows most
of the time anyway).
This commit was SVN r11268.
releases on Linux and OS X) don't handle const_cast<> of 2-dimensional
arrays properly. If we're using one of the compilers that isn't friendly
to such casts, fall back to a standard C-style cast.
refs: #271
This commit was SVN r11263.
We have repeatedly seen users inadvertantly try to use a C compiler
for $CXX (e.g., using icc instead of icpc in recent versions of the
Intel compiler). Unfortunately, this would "sorta work", meaning that
configure would complete successfully and the build would fail much
later in the process (when $CXX was used to try to link a C++
compiler). This was further compounded by the fact that many C
compilers will switch into "C++ mode" when they compile files that end
in .cc -- meaning that they'll *compile* C++ codes properly, but they
won't *link* properly. Hence, users would get all the way down to
compiling the C++ MPI bindings or ompi_info (i.e., very late in the
build process) before the problem became evident.
We already have a test in configure that tries to compile, link, and
run a sample C++ program. This helped ensure that $CXX was a valid
compiler, but it did not catch if the user accidentally supplied a C
compiler instead of a C++ compiler because the test program was simply
"return 0". This commit updates the test program to use some
C++-specific constructs (std::string) so that if the user supplies a C
compiler in $CXX, the program may *compile*, but it will definitely
fail to *link*.
Hence, the process will fail early in configure (with a descriptive
message about how the compiler failed to work properly) rather than
late in the build.
This commit was SVN r10829.
are 3 arguments: the pointer to the memory location to prefetch, the type of
operation that will be done on the memory (read or write) and the expected
locality.
This commit was SVN r10294.
whether an if statement is likely to be taken and for prefetching memory.
Current macros:
OPAL_LIKELY(expression)
OPAL_UNLIKELY(expression)
OPAL_PREFETC(address)
This commit was SVN r10278.
situations) before going on to tests that run executables with the
compiler. Print a friendly error message if it fails. Hopefully, this
will help people with borked compilers.
This commit was SVN r8898.
C / C++ tests now use the caching scheme. Only exception is C++ exception
handling code, which is disabled by default, so I'm not too worried about making
that configure faster :)
This commit was SVN r7403.
of flags to configure. Now don't need to specify the contrib/platform
part of the path if you don't want to
* Add "optimized" platform setting that will undo all the performance-
affecting things that a developer build sets up.
This commit was SVN r6946.
having it in config/ompi_setup_cxx.m4
2. Adding --enable-coverage option. This will add teh flags -ftest-coverage
and -fprofile-arcs to the flags. Also, one needs to compile with
debug and static only to enable code coverage
3. Adding the coverage flag options to WRAPPER_*_FLAGS so that mpicc and co.,
will add these to teh executables when they are compiled
This commit was SVN r5416.
