this commit revamps the internal operations of the sharedfp components.
Specifically, it is focused around removing the second file_open
operation for shared file pointers. This makes the code more efficient.
Because of that, there is no necessity anymore for the sharedfp_lazy_open
mca parameter.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
check for pending I/O operations and invalid modes
and return proper error codes before executing MPI_File_sync
makes the e_sync_1 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
in file_get_byte_offset, return an error code if the offset
leads to an invalid position in file.
Makes the e_get_byte_offset_1 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
and some internal structure elements/components. Along the way,
add support for the cb_nodes Info object.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
since the request code is now being accessed also from the vulcan fcoll
component, the request code was relocated into the common/ompio
directory to avoid ld load problems.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
Per MPI-3.1:8.7.1 p361:11-13, it's valid for MPI_FINALIZED to be
invoked during an attribute destruction callback (e.g., during the
destruction of keyvals on MPI_COMM_SELF during the very beginning of
MPI_FINALIZE). In such cases, MPI_FINALIZED must return "false".
Prior to this commit, we hung in FINALIZED if it were invoked during
a COMM_SELF attribute destruction callback in FINALIZE. See
https://github.com/open-mpi/ompi/issues/5084.
This commit converts the MPI_INITIALIZED / MPI_FINALIZED
infrastructure to use a single enum (ompi_mpi_state, set atomically)
to represent the state of MPI:
- not initialized
- init started
- init completed
- finalize started
- finalize past COMM_SELF destruction
- finalize completed
The "finalize past COMM_SELF destruction" state is what allows us to
return "false" from MPI_FINALIZED before COMM_SELF has been fully
destroyed / all attribute callbacks have been invoked.
Since this state is checked at nearly every MPI API call (to see if
we're outside of the INIT/FINALIZE epoch), care was taken to use
atomics to *set* the ompi_mpi_state value in ompi_mpi_init() and
ompi_mpi_finalize(), but performance-critical code paths can simply
read the variable without needing to use a slow call to an
opal_atomic_*() function.
Thanks to @AndrewGaspar for reporting the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit attempts to update the romio io component to not use
functions removed in MPI-3.0 (2012). This is a first cut and will
probably need to be reviewed for correctness.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
romio assumes that all predefined datatypes are contiguous. Because of
the (terribly named) composed datatypes MPI_SHORT_INT, MPI_DOUBLE_INT,
MPI_LONG_INT, etc this is an incorrect assumption. The simplest way to
fix this is to override the MPI_Type_get_envelope and
MPI_Type_get_contents calls with calls that will work on these
datatypes. Note that not all calls to these MPI functions are
replaced, only the ones used when flattening a non-contiguous
datatype.
References #5009
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
somehow the flag indicating to gather performance data
on collective io operations has changed to 1 accidentally.
Should be 0 ( false) by default.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
this commit fixes an issue observed with romio314 and the hdf5 1.10.x testsuite.
The ADIOI_Datatype_iscontig() routine in romio314/src/io_romio314_module.c
will now return for a datatype of size 0 that it is contiguous, even if the extent
of the datatype is non-zero. This avoids a segmentation fault observed in the
ADIOI_Flatten routine, and fixes this particular with the hdf5 1.10.x testsuite in
OpenMPI with romio314.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
after performing the final OBJ_RELEASE on the request,
reset the user level variable to MPI_REQUEST_NULL.
Otherwise the c_2_f translation step in the fortran
interface fails.
Fixes issue #4807
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
ompio has the unique problem, that mca parameters set in the io/ompio component
have to be accessible from other frameworks as well. This is mostly done to avoid
a replication in the parameter names and to reduce the number of mca parameters that
and end-user has to worry about.
This commit introduces a generic function to retrieve ompio mca parameters, the function pointer
is stored on the file handle. It replaces two functions that used the same concept already for
one parameter each.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
ompio has historically changed the WRONLY flag provided by the applicaiton
to RDWR to allow for the data sieving optimization within the two-phase I/O
fcoll component. This change did not have a performance impact
on regular UNIX file systems, but seems to hurt performance on NFS (and maybe Lustre?)
So provide an option that allows to keep the WRONLY option, and raise an error
if tha fcoll/two-phase would actually like to use the data sieving.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
This commit looks large, but its really mostly a cleanup step.
1. introduce proper error handling for the return values of fcntl and the fbtl_posix_lock function
2. rename a parameter to more accurately reflect what it does
3. introduce an mca parameter in the fs/ufs component that allows to control
what the level of locking the user would like to enforce
4. move the initialization of the fs_block_size parameter from fs/ufs into the
common/ompio component. An fs component might be allowed to overwrite this
value, but none of the actual fs components do that.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
romio314 is a just a component that does not require Fortran bindings,
so simply disable Fortran support to prevent warnings about deprecated flags
Fixesopen-mpi/ompi#4281
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
the new grouping option simple+ performs all calculations used
for the aggregator selection as if the default file view would be used,
thus avoiding communication in file_set_view all together. This mode
is useful for applications that do not set a file view, but use
explicit offset operations on the default file view.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
- change the increment used to test various no. of aggregators
to avoid using only power of two numbers
- convert some paratemers in the cost function from integers to
to floats for providing smoother and more consistent results
- set the FVIEW_IS_SET flag on the file *only* if the user
has set anything else than the default file view.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
adjust how the aggregator nodes are selected depending on whether processes
have been mapped by node or anything else.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
add a new aggregator selection algorithm based on the performance
model described in:
Shweta Jha, Edgar Gabriel,
'Performance Models for Communication in Collective I/O Operations'
Proceedings of the 17th IEEE/ACM Symposium
on Cluster, Cloud and Grid Computing, Workshop on Theoretical
Approaches to Performance Evaluation, Modeling and Simulation, 2017.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
adjust the location on where the fcoll_base_file_select function is
colled to ensure that all fs level parameters are correctly set.
io/ompio: minor fixes to initialization of the stripe_size and an if statement in the
simple_grouping option.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
changing the value of mca_io_ompio_grouping_option lead to a segfault due to
a double-free problem. Remove the erroneous free statements that have been introduced
and add a note ensuring that we are not re-adding them back at that spot.
fixes issue #3903
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
Passed the below set of symbols into a script that added ompi_ to them all.
Note that if processing a symbol named "foo" the script turns
foo into ompi_foo
but doesn't turn
foobar into ompi_foobar
But beyond that the script is blind to C syntax, so it hits strings and
comments etc as well as vars/functions.
coll_base_comm_get_reqs
comm_allgather_pml
comm_allreduce_pml
comm_bcast_pml
fcoll_base_coll_allgather_array
fcoll_base_coll_allgatherv_array
fcoll_base_coll_bcast_array
fcoll_base_coll_gather_array
fcoll_base_coll_gatherv_array
fcoll_base_coll_scatterv_array
fcoll_base_sort_iovec
mpit_big_lock
mpit_init_count
mpit_lock
mpit_unlock
netpatterns_base_err
netpatterns_base_verbose
netpatterns_cleanup_narray_knomial_tree
netpatterns_cleanup_recursive_doubling_tree_node
netpatterns_cleanup_recursive_knomial_allgather_tree_node
netpatterns_cleanup_recursive_knomial_tree_node
netpatterns_init
netpatterns_register_mca_params
netpatterns_setup_multinomial_tree
netpatterns_setup_narray_knomial_tree
netpatterns_setup_narray_tree
netpatterns_setup_narray_tree_contigous_ranks
netpatterns_setup_recursive_doubling_n_tree_node
netpatterns_setup_recursive_doubling_tree_node
netpatterns_setup_recursive_knomial_allgather_tree_node
netpatterns_setup_recursive_knomial_tree_node
pml_v_output_close
pml_v_output_open
intercept_extra_state_t
odls_base_default_wait_local_proc
_event_debug_mode_on
_evthread_cond_fns
_evthread_id_fn
_evthread_lock_debugging_enabled
_evthread_lock_fns
cmd_line_option_t
cmd_line_param_t
crs_base_self_checkpoint_fn
crs_base_self_continue_fn
crs_base_self_restart_fn
event_enable_debug_output
event_global_current_base_
event_module_include
eventops
sync_wait_mt
trigger_user_inc_callback
var_type_names
var_type_sizes
Signed-off-by: Mark Allen <markalle@us.ibm.com>
update the cartesian communicator based grouping strategy to match the other
algorithms used in the aggregator selection process.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
* Add work around support for the following missing ops in ROMIO 3.1.4
- `MPI_File_iread_at_all`
- `MPI_File_iwrite_at_all`
- `MPI_File_iread_all`
- `MPI_File_iwrite_all`
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
The expected sequence of events for processing info during object creation
is that if there's an incoming info arg, it is opal_info_dup()ed into the obj
at obj->s_info first. Then interested components register callbacks for
keys they want to know about using opal_infosubscribe_infosubscribe().
Inside info_subscribe_subscribe() the specified callback() is called with
whatever matching k/v is in the object's info, or with the default. The
return string from the callback goes into the new k/v stored in info, and
the input k/v is saved as __IN_<key>/<val>. It's saved the same way
whether the input came from info or whether it was a default. A null return
from the callback indicates an ignored key/val, and no k/v is stored for
it, but an __IN_<key>/<val> is still kept so we still have access to the
original.
At MPI_*_set_info() time, opal_infosubscribe_change_info() is used. That
function calls the registered callbacks for each item in the provided info.
If the callback returns non-null, the info is updated with that k/v, or if
the callback returns null, that key is deleted from info. An __IN_<key>/<val>
is saved either way, and overwrites any previously saved value.
When MPI_*_get_info() is called, opal_info_dup_mpistandard() is used, which
allows relatively easy changes in interpretation of the standard, by looking
at both the <key>/<val> and __IN_<key>/<val> in info. Right now it does
1. includes system extras, eg k/v defaults not expliclty set by the user
2. omits ignored keys
3. shows input values, not callback modifications, eg not the internal values
Currently the callbacks are doing things like
return some_condition ? "true" : "false"
that is, returning static strings that are not to be freed. If the return
strings start becoming more dynamic in the future I don't see how unallocated
strings could support that, so I'd propose a change for the future that
the callback()s registered with info_subscribe_subscribe() do a strdup on
their return, and we change the callers of callback() to free the strings
it returns (there are only two callers).
Rough outline of the smaller changes spread over the less central files:
comm.c
initialize comm->super.s_info to NULL
copy into comm->super.s_info in comm creation calls that provide info
OBJ_RELEASE comm->super.s_info at free time
comm_init.c
initialize comm->super.s_info to NULL
file.c
copy into file->super.s_info if file creation provides info
OBJ_RELEASE file->super.s_info at free time
win.c
copy into win->super.s_info if win creation provides info
OBJ_RELEASE win->super.s_info at free time
comm_get_info.c
file_get_info.c
win_get_info.c
change_info() if there's no info attached (shouldn't happen if callbacks
are registered)
copy the info for the user
The other category of change is generally addressing compiler warnings where
ompi_info_t and opal_info_t were being used a little too interchangably. An
ompi_info_t* contains an opal_info_t*, at &(ompi_info->super)
Also this commit updates the copyrights.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
ompi_communicator_t, ompi_win_t, ompi_file_t all have a super class of type opal_infosubscriber_t instead of a base/super type of opal_object_t (in previous code comm used c_base, but file used super). It may be a bit bold to say that being a subscriber of MPI_Info is the foundational piece that ties these three things together, but if you object, then I would prefer to turn infosubscriber into a more general name that encompasses other common features rather than create a different super class. The key here is that we want to be able to pass comm, win and file objects as if they were opal_infosubscriber_t, so that one routine can heandle all 3 types of objects being passed to it.
MPI_INFO_NULL is still an ompi_predefined_info_t type since an MPI_Info is part of ompi but the internal details of the underlying information concept is part of opal.
An ompi_info_t type still exists for exposure to the user, but it is simply a wrapper for the opal object.
Routines such as ompi_info_dup, etc have all been moved to opal_info_dup and related to the opal directory.
Fortran to C translation tables are only used for MPI_Info that is exposed to the application and are therefore part of the ompi_info_t and not the opal_info_t
The data structure changes are primarily in the following files:
communicator/communicator.h
ompi/info/info.h
ompi/win/win.h
ompi/file/file.h
The following new files were created:
opal/util/info.h
opal/util/info.c
opal/util/info_subscriber.h
opal/util/info_subscriber.c
This infosubscriber concept is that communicators, files and windows can have subscribers that subscribe to any changes in the info associated with the comm/file/window. When xxx_set_info is called, the new info is presented to each subscriber who can modify the info in any way they want. The new value is presented to the next subscriber and so on until all subscribers have had a chance to modify the value. Therefore, the order of subscribers can make a difference but we hope that there is generally only one subscriber that cares or modifies any given key/value pair. The final info is then stored and returned by a call to xxx_get_info.
The new model can be seen in the following files:
ompi/mpi/c/comm_get_info.c
ompi/mpi/c/comm_set_info.c
ompi/mpi/c/file_get_info.c
ompi/mpi/c/file_set_info.c
ompi/mpi/c/win_get_info.c
ompi/mpi/c/win_set_info.c
The current subscribers where changed as follows:
mca/io/ompio/io_ompio_file_open.c
mca/io/ompio/io_ompio_module.c
mca/osc/rmda/osc_rdma_component.c (This one actually subscribes to "no_locks")
mca/osc/sm/osc_sm_component.c (This one actually subscribes to "blocking_fence" and "alloc_shared_contig")
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Conflicts:
AUTHORS
ompi/communicator/comm.c
ompi/debuggers/ompi_mpihandles_dll.c
ompi/file/file.c
ompi/file/file.h
ompi/info/info.c
ompi/mca/io/ompio/io_ompio.h
ompi/mca/io/ompio/io_ompio_file_open.c
ompi/mca/io/ompio/io_ompio_file_set_view.c
ompi/mca/osc/pt2pt/osc_pt2pt.h
ompi/mca/sharedfp/addproc/sharedfp_addproc.h
ompi/mca/sharedfp/addproc/sharedfp_addproc_file_open.c
ompi/mca/topo/treematch/topo_treematch_dist_graph_create.c
ompi/mpi/c/lookup_name.c
ompi/mpi/c/publish_name.c
ompi/mpi/c/unpublish_name.c
opal/mca/mpool/base/mpool_base_alloc.c
opal/util/Makefile.am
When we updated UFS and others we left NFS alone. HDF group would like
a fix, so here we go.
Signed-off-by: Ken Raffenetti <raffenet@mcs.anl.gov>
(back-ported from upstream commit pmodels/mpich@684df9f4c9)
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
since Open MPI now requires a C99, and ptrdiff_t type is part of C99,
there is no more need for the abstract OPAL_PTRDIFF_TYPE type.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
this commit brings over the behavior from the 2.x series to master, mostly with the fork for the 3.x series in mind.
Also, use strncasecmp instead of two strncmps
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
As we changed the ABI (forcing a major release), we can limit
the size of the predefined communicators by moving the collective
structure outside the communicator. This might have a minimal,
but unnoticeable, impact on performance. This approach has been
discussed during the January 2017 devel meeting.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Revert the logic of io_ompio_sharedfp_lazy_open. The user now has to explicitely
disable shared fp in order for the structures not to be allocated.
Otherwise, resetting the shared fp e.g. in case the file was opened
in append mode will not work correctly, the code could deadlock.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
