Based on a suggestion from George on #31806, use the pre-computed
sizes rather than duplicating the computation math (which may change
someday in the future).
cmr=v1.8.2:ticket=trac:4647
This commit was SVN r31841.
The following Trac tickets were found above:
Ticket 4647 --> https://svn.open-mpi.org/trac/ompi/ticket/4647
a memory leak. Similar changes shuld be applied to all the
other PML that are copies of OB1. This patch is related to
#4653.
This commit was SVN r31838.
MPI_Isend.
I filed an RFC for this optimization some time back. It is a
relatively simple optimization. If the data associated with an
MPI_Isend can be put on the wire without allocating an MPI_Request
then do so. In this case we can legally return omp_request_empty
which will correctly indicate that the request is complete and that is
was not cancelled (these are the only requirements on send requests).
cmr=v1.8.3:reviewer=bosilca
This commit was SVN r31828.
r30343 introduced the optimization of putting the OB1 sendreq and
recvreq on the stack for blocking sends and receives. However, the
requests did not contain enough storage for the data that is normally
immediately ''after'' the request (e.g., BTL data).
This commit changes these requests to be pointers and to use alloca()
to get enough total space for the OB1 request and all the associated
data.
The change is smaller than it looks; most of it is just changing from
"foo.bar" to "foo->bar" notation (etc.).
Submitted by Jeff, reviewed by Nathan. But we want George to look at
this (and get a little soak time on the trunk) before moving to v1.8.
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31806.
The following SVN revision numbers were found above:
r30343 --> open-mpi/ompi@2b57f4227e
An OBJ_DESTRUCT was missing for mca_pml_ob1.send_ranges causing a
memory leak. Identified by valgrind.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31768.
top_ompi_srcdir -> OMPI_TOP_SRCDIR
top_ompi_builddir -> OMPI_TOP_BUILDDIR
We also split the srcdir/builddir flags according to their local tree (e.g., OPAL_TOP_SRCDIR), and tied them all together in configure.ac. Renamed ompi_ignore and ompi_unignore to be opal_<foo> as these are agnostic markers.
Only thing left is ompilibdir being treated similar to what we dif for srcdir/builddir. Coming soon.
This commit was SVN r31678.
We will track #4568 from the 1.8 CMR.
Closes trac:4568
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31535.
The following Trac tickets were found above:
Ticket 4568 --> https://svn.open-mpi.org/trac/ompi/ticket/4568
When compiling --with-ft there are a few compiler warnings about
unused variables. This patch fixes those compiler warnings.
This commit was SVN r30927.
The problem was caused by the static request optimization. The buffered send case
is much like the isend case in that the request structure may be needed after
MPI_Bsend completes. Fix this case by calling isend and freeing the resulting
request.
cmr=v1.7.5:ticket=trac:4149
This commit was SVN r30601.
The following Trac tickets were found above:
Ticket 4149 --> https://svn.open-mpi.org/trac/ompi/ticket/4149
This change does not appear to increase the small message latency of ping-pong
benchmarks and fixes an issue found by our ibm datatype tests.
Fixes trac:4232
cmr=v1.7.5:ticket=trac:4149
This commit was SVN r30598.
The following Trac tickets were found above:
Ticket 4149 --> https://svn.open-mpi.org/trac/ompi/ticket/4149
Ticket 4232 --> https://svn.open-mpi.org/trac/ompi/ticket/4232
btl sendi functions currently can not handle the descriptor being NULL. The
send inline optimization was assuming (incorrectly) that NULL was ok.
cmr=v1.7.5:ticket=trac:4149
This commit was SVN r30364.
The following Trac tickets were found above:
Ticket 4149 --> https://svn.open-mpi.org/trac/ompi/ticket/4149
Per RFC. There are two optimizations in this commit:
- Allocate requests for blocking sends and receives on the stack. This
bypasses the request free list and saves two atomics on the critical path.
This change improves the small message ping-pong by 50-200ns on both AMD
and Intel CPUs.
- For small messages try to use the btl sendi function before intializing a
send request. If the sendi fails or the btl does not have a sendi function
silently fallback on the standard send path.
cmr=v1.7.5:reviewer=brbarret
This commit was SVN r30343.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
http://www.open-mpi.org/community/lists/devel/2013/10/13072.php
Add support for pinning GPU Direct RDMA in openib BTL for better small message latency of GPU buffers.
Note that none of this is compiled in unless CUDA-aware support is requested.
This commit was SVN r29680.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
* add a new MCA param orte_hostname_cutoff to specify the number of nodes at which we stop including hostnames. This defaults to INT_MAX => always include hostnames. If a value is given, then we will include hostnames for any allocation smaller than the given limit.
* remove ompi_proc_get_hostname. Replace all occurrences with a direct link to ompi_proc_t's proc_hostname, protected by appropriate "if NULL"
* modify the OMPI-ORTE integration component so that any call to modex_recv automatically loads the ompi_proc_t->proc_hostname field as well as returning the requested info. Thus, any process whose modex info you retrieve will automatically receive the hostname. Note that on-demand retrieval is still enabled - i.e., if we are running under direct launch with PMI, the hostname will be fetched upon first call to modex_recv, and then the ompi_proc_t->proc_hostname field will be loaded
* removed a stale MCA param "mpi_keep_peer_hostnames" that was no longer used anywhere in the code base
* added an envar lookup in ess/pmi for the number of nodes in the allocation. Sadly, PMI itself doesn't provide that info, so we have to get it a different way. Currently, we support PBS-based systems and SLURM - for any other, rank0 will emit a warning and we assume max number of daemons so we will always retain hostnames
This commit was SVN r29052.
This creates a really bad scaling behavior. Users have found a nearly 20% launch time differential between mpirun and PMI, with PMI being the slower method. Some of the problem is attributable to poor exchange algorithms in RM's like Slurm and Alps, but we make things worse by calling "get" so many times.
Nathan (with a tad advice from me) has attempted to alleviate this problem by reducing the number of "get" calls. This required the following changes:
* upon first request for data, have the OPAL db pmi component fetch and decode *all* the info from a given remote proc. It turned out we weren't caching the info, so we would continually request it and only decode the piece we needed for the immediate request. We now decode all the info and push it into the db hash component for local storage - and then all subsequent retrievals are fulfilled locally
* reduced the amount of data by eliminating the exchange of the OMPI_ARCH value if heterogeneity is not enabled. This was used solely as a check so we would error out if the system wasn't actually homogeneous, which was fine when we thought there was no cost in doing the check. Unfortunately, at large scale and with direct launch, there is a non-zero cost of making this test. We are open to finding a compromise (perhaps turning the test off if requested?), if people feel strongly about performing the test
* reduced the amount of RTE data being automatically fetched, and fetched the rest only upon request. In particular, we no longer immediately fetch the hostname (which is only used for error reporting), but instead get it when needed. Likewise for the RML uri as that info is only required for some (not all) environments. In addition, we no longer fetch the locality unless required, relying instead on the PMI clique info to tell us who is on our local node (if additional info is required, the fetch is performed when a modex_recv is issued).
Again, all this only impacts direct launch - all the info is provided when launched via mpirun as there is no added cost to getting it
Barring objections, we may move this (plus any required other pieces) to the 1.7 branch once it soaks for an appropriate time.
This commit was SVN r29040.
value to signal that the operation of retrieving the element from the free list
failed. However in this case the returned pointer was set to NULL as well, so the
error code was redundant. Moreover, this was a continuous source of warnings when
the picky mode is on.
The attached parch remove the rc argument from the OMPI_FREE_LIST_GET and
OMPI_FREE_LIST_WAIT macros, and change to check if the item is NULL instead of
using the return code.
This commit was SVN r28722.
This patch reshape the way we deal with topologies completely. Where
our topologies were mainly storage components (they were not capable
of creating the new communicator), the new version is built around a
[possibly] common representation (in mca/topo/topo.h), but the functions
to attach and retrieve the topological information are specific to each
component. As a result the ompi_create_cart and ompi_create_graph functions
become useless and have been removed.
In addition to adding the internal infrastructure to manage the topology
information, it updates the MPI interface, and the debuggers support and
provides all Fortran interfaces.
This commit was SVN r28687.
This macro is only used on the failure path so the additional if statement
should not have any affect on performance.
cmr:v1.7
This commit was SVN r28292.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
Reasoning: The old behavior was a little confusing. mca_base_components_open does not open an output stream so it is a little unexpected that mca_base_components_close does. To add to this several frameworks (that don't use mca_base_components_close) failed to close their output in the framework close function and others closed their output a second time. This change is an improvement to the symantics of mca_base_components_open/close as they are now symetric in their functionality.
This commit was SVN r27570.
pml/v:
- If vprotocol is not being used vprotocol_include_list is leaked. Assume vprotocol never takes ownership (see below) and always free the string.
coll/ml:
- (patch verified) calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
- Need to free mca_coll_ml_component.config_file_name on component close.
btl/openib:
- calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
vprotocol/base:
- There was no way for pml/v to determine if vprotocol took ownership of vprotocol_include_list. Fix by always never ownership (use strdup).
mca/base:
- param_lookup will result in storage->stringval to be a newly allocated string if the mca parameter has a string value. ensure this string is always freed.
cmr:v1.7
This commit was SVN r27569.
It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
Not sure what happened here, but the resulting trunk wouldn't even configure. After spending time fixing that problem, I found it wouldn't compile due to multiple syntax errors that had been introduced in both the OPAL and OMPI layer. This raised questions as to the completeness of the work.
Given that the author is departing, I pinged Jeff about it and we agreed to revert this for now. Hopefully, it can either be fixed by the author prior to actual departure, or someone else can pick it up (now that it is in the history) and fix it.
This commit was SVN r27511.
The following SVN revision numbers were found above:
r27508 --> open-mpi/ompi@12c3c743de
r27509 --> open-mpi/ompi@79e4a8ca38
r27510 --> open-mpi/ompi@1ad5ff625a
- fix the Fortran layer to use new macros to convert Fortran-to-C status
- change the C internals to pull out old OMPI_SET_STATUS* macros
Also, change name of "status" argument in topo_test_f.c to "topo_type".
This commit was SVN r27403.
it to a negative number). Get rid of the multiplication in the critical
path, and keep the functions as simple as possible.
This commit was SVN r26864.
Among other things, this patch deals with the following issues:
* fix ompi-checkpoint argument parsing
* ompi-restart -showme prints an extraneous "Restarted child with PID"
message. Move around the debug statement to avoid this.
* fixes for the state machine changes
This commit was SVN r26770.
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
together, so implement all functions in the MTL interface for all
MTLs. The only places NULL was still being set was for add_comm/del_comm,
and matched probe, both of which are straight forward to implement (or
return ERROR_NOT_IMPLEMENTED, since the PML can't emulate matched probe).
This commit was SVN r26194.
the ompi_message_t structure to properly initialize convertor (the peer
is available in the request in OB1, and wasn't needed when I did the
original implementation).
* Implement matched probe for the Portals4 MTL and add NULL function pointers
for the other MTLs.
* Add add_comm and del_comm functions to portals4 MTL so that direct call
almost works again.
* Add NEWS item that we've implemented matched probe
This commit was SVN r26180.
- MAJOR! get src descriptor leaks if mca_bml_base_send fails
- minor. descriptor leaked in mca_pml_send_request_start_copy if the btl returns OMPI_ERR_RESOURCE_BUSY.
This commit was SVN r26077.
Uses new CUDA IPC support. Also, a few minor changes in PML to take
advantage of it.
This code has no effect unless user asks for it explicitly via
configure arguments. Otherwise, it is either #ifdef'ed out or
not compiled.
This commit was SVN r26039.
supposed to. I.e., half-baked/not complete stuff.
This commit backs out all of r25545. Sorry folks!
This commit was SVN r25546.
The following SVN revision numbers were found above:
r25545 --> open-mpi/ompi@7f9ae11faf
to make MPI_IN_PLACE (and other sentinel Fortran constants) work on OS
X, we need to use the following compiler (linker) flag:
-Wl,-commons,use_dylibs
So if we're compiling on OS X, test to see if that flag works with the
compiler. If so, add it to the wrapper FFLAGS and FCFLAGS (note that
per a future update, we'll only have one Fortran compiler anyway).
Fixes trac:1982.
This commit was SVN r25545.
The following Trac tickets were found above:
Ticket 1982 --> https://svn.open-mpi.org/trac/ompi/ticket/1982
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
they only add the context id to the tag selection of the underlying
messaging meachinsm.
We would like to enable an MTL to maintain its own context data
per-communicator. This way an MTL will be able to queue incoming eager
messages and rendezvous requests per-communicator basis.
The MTL will be allowed to override comm->c_pml_comm member,
since it's unused in pml_cm anyway.
This commit was SVN r24858.
Instead of returning MPI_SUCCESS every time they are called regardless of the status of the call, they should return a value representative of the action. So similar to MPI_Wait/MPI_Test they will return MPI_SUCCESS if the action was successfull, or the value that matches status.MPI_ERROR for the operation if it is unsuccessful.
This was discussed on the [http://www.open-mpi.org/community/lists/devel/2011/03/9109.php ompi-devel list]
This commit was SVN r24551.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
as an argument to a macro which could result in it
being called twice. I did not observe any issues,
but it should be fixed. Also did some minor refactoring
for clarity and following code convention.
This commit was SVN r23886.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
Also, some other changes to bring the csum PML up
to date with changes that happened in ob1 over the
last two years. This includes a few bug
fixes and some minor refactoring.
This commit was SVN r23757.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
status structure or the _ucount field in the status structure.
On 64-bit sparc, the macros resolve into integer array assignments.
For all others, they are just simple assignments. This fixes
possible BUS errors seen when running on the SPARC processor.
This bug was introduced when the _count field changed from an int
into a size_t. See the changes to request.h for additional details.
This commit fixes trac:2514.
This commit was SVN r23554.
The following Trac tickets were found above:
Ticket 2514 --> https://svn.open-mpi.org/trac/ompi/ticket/2514
step is the configure and Fortran mojo that Jeff will put in. Until then I
guess the Fortran interface is broken (at least all functions using the hidden
count firld in the MPI_Status).
This commit was SVN r23467.
#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
allows the BTL to specify a specific ompi_proc_t that had an
error. Also add an optional descriptive string. Currently, arguments
are not used but will be by future failover PML.
Changes based on RFC. Reviewed by George Bosilca.
This commit was SVN r23174.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
ompi_ptr_t by translating into void*. Instead keep it as an ompi_ptr_t all
the way. Thanks to Timur Magomedov for helping to track down this issue and
test the patch.
cmr:v1.4
cmr:v1.5
This commit was SVN r23030.
1. fix a bug that caused an infinite loop in configure when specifying want-ft but not want-ft-thread by removing a stale reference to the opal-progress-thread option
2. add want-ft=orcm so we can build the orcm errmgr component
3. cleanup the use of "ompi_want_ft_xxx" and replace it with "opal_want_ft_xxx" so that naming conventions are preserved
This commit was SVN r22885.
Remove the --enable-progress-threads option as this is no longer functional, and hardcode OPAL_ENABLE_PROGRESS_THREADS to 0.
Replace the --enable-mpi-threads option with --enable-mpi-thread-multiple as this is clearer as to meaning. This option automatically turns "on" opal thread support if it wasn't already so specified. If the user specifies --disable-opal-multi-threads --enable-mpi-thread-multiple, we will error out with a message
Add a new --enable-opal-multi-threads option that turns "on" opal thread support without doing anything wrt mpi-thread-multiple
This commit was SVN r22841.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
http://www.open-mpi.org/community/lists/devel/2009/08/6618.php
lower the default priority of PML/cm to allow _defined_ behaviour
for systems, where both MTLs and BTLs are available (Portals and MX).
Keep the previous behaviour of favoring in case of PSM.
Still, the user may select --mca pml cm for apps where applicable.
This commit was SVN r21834.
variables that are not initialized and are declared in a file that
doesn't export any globally visible function are marked as
non-initialized constants, i.e. uninitialized common symbols. For some
obscure reasons, they get removed from the object files on Mac OS X.
So far I found two solution to this problem. One require the addition
of "-c" to the linker command, the second one (corresponding to this
patch) force them to became a common initialized symbol.
This commit was SVN r21739.
Add ability to store the RM's jobid string to tag the notifier message so that the sys admin knows what job had the problem.
This commit was SVN r21687.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
the debugger plugins into files suffixed by _dbg.h.
This commit was SVN r21404.
The following Trac tickets were found above:
Ticket 1931 --> https://svn.open-mpi.org/trac/ompi/ticket/1931
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
