recvreq->req_recv.req_base.req_type should always be set before invoking
MCA_PML_OB1_RECV_REQUEST_INIT(recvreq, ...) otherwise, the previous type
might be set, and you could end up with MPC_PML_REQUEST_IMPROBE when
MCA_PML_REQUEST_RECV is expected.
Thanks Chris Pattison for the report and test case.
Fixesopen-mpi/ompi#2275
- pass field_mask to ucp_init().
- use non-blocking disconnect.
- recv() with pre-allocated request.
- call opal_progress() from iprobe() and improbe().
- use shift pattern in connect/disconnect.
This commit fixes an issue that can occur if a target gets overwhelmed with
requests. This can cause osc/pt2pt to go into deep recursion with a stack
like req_complete_cb -> ompi_osc_pt2pt_callback -> start -> req_complete_cb
-> ... . At small scale this is fine as the recursion depth stays small but
at larger scale we can quickly exhaust the stack processing frag requests.
To fix the issue the request callback now simply puts the request on a
list and returns. The osc/pt2pt progress function then handles the
processing and reposting of the request.
As part of this change osc/pt2pt can now post multiple fragment receive
requests per window. This should help prevent a target from being overwhelmed.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit updates the btl selection logic for the RDMA and RDMA
pipeline protocols to use a btl iff: 1) the btl is also used for eager
messages (high exclusivity), or 2) no other RDMA btl is available on
an endpoint and the pml_ob1_use_all_rdma MCA variable is true. This
fixes a performance regression with shared memory when an RDMA capable
network is available.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
On start we were not correctly resetting all request fields. This was
leading to a double-completion on persistent receives. This commit
updates the base start code to reset the receive req_bytes_packed and
the send request convertor.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
It was introduced in PR https://github.com/open-mpi/ompi/pull/1228
in particular in commit 041a6a9f53.
Original solution was using "flexible array member" called "mxm_base"
to "fall-through" to the "mxm" send/recv member that located in the
outer structure.
After changing number of elements in "mxm_base" from 0 to 1 we actually
allocating 2 mxm_req_base_t elements which leads to increased overal
size and harms cache performance.
It also brakes "mca_pml_yalla_check_request_state" function.
This commit fixes two bugs in pml/ob1:
- Do not called MCA_PML_OB1_PROGRESS_PENDING from
mca_pml_ob1_send_request_start_copy as this may lead to a recursive
call to mca_pml_ob1_send_request_process_pending.
- In mca_pml_ob1_send_request_start_rdma return the rdma frag object
if a btl fragment can not be allocated. This fixes a leak
identified by @abouteiller and @bosilca.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* mpi/start: fix bugs in cm and ob1 start functions
There were several problems with the implementation of start in Open
MPI:
- There are no checks whatsoever on the state of the request(s)
provided to MPI_Start/MPI_Start_all. It is erroneous to provide an
active request to either of these calls. Since we are already
looping over the provided requests there is little overhead in
verifying that the request can be started.
- Both ob1 and cm were always throwing away the request on the
initial call to start and start_all with a particular
request. Subsequent calls would see that the request was
pml_complete and reuse it. This introduced a leak as the initial
request was never freed. Since the only pml request that can
be mpi complete but not pml complete is a buffered send the
code to reallocate the request has been moved. To detect that
a request is indeed mpi complete but not pml complete isend_init
in both cm and ob1 now marks the new request as pml complete.
- If a new request was needed the callbacks on the original request
were not copied over to the new request. This can cause osc/pt2pt
to hang as the incoming message callback is never called.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* osc/pt2pt: add request for gc after starting a new request
Starting a new receive may cause a recursive call into the pt2pt
frag receive function. If this happens and the prior request is
on the garbage collection list it could cause problems. This commit
moves the gc insert until after the new request has been posted.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
The request code was setting the request as pml_complete before
calling MCA_PML_OB1_SEND_REQUEST_MPI_COMPLETE. This was causing
MCA_PML_OB1_SEND_REQUEST_RETURN to be called twice in some cases. The
code now mirrors the recvreq code and only sets the request as pml
complete if the request has not already been freed.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Regarding BFO it should be mentionned that this component is currently
unmaintained, and that despite my efforts I could not make it compile
(it would not compile before this patch either).
This fixes a hang caused by the request refactor work. The cm pml was
not updated and was hanging is most cases.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Remodel the request.
Added the wait sync primitive and integrate it into the PML and MTL
infrastructure. The multi-threaded requests are now significantly
less heavy and less noisy (only the threads associated with completed
requests are signaled).
* Fix the condition to release the request.
If during the request completion callback we post another request that
completes right away (such a small send or a match for an unexpected
short message) we will try to complete the second request while holding
the lock for the completion of the first. For performance reasons
(mainly to avoid unlocking and locking the request mutex several times)
we have made the request lock recursive.
Added mca parameter to turn progress thread on/off
Add a flag to check if we have btl progress thread.
Added macro for ob1 matching lock.
Update the AUTHORS file.
This commit adds code to detect when procs are unreachable when using
the dynamic add_procs functionality.
Fixes#1501
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit rewrites both the mpool and rcache frameworks. Summary of
changes:
- Before this change a significant portion of the rcache
functionality lived in mpool components. This meant that it was
impossible to add a new memory pool to use with rdma networks
(ugni, openib, etc) without duplicating the functionality of an
existing mpool component. All the registration functionality has
been removed from the mpool and placed in the rcache framework.
- All registration cache mpools components (udreg, grdma, gpusm,
rgpusm) have been changed to rcache components. rcaches are
allocated and released in the same way mpool components were.
- It is now valid to pass NULL as the resources argument when
creating an rcache. At this time the gpusm and rgpusm components
support this. All other rcache components require non-NULL
resources.
- A new mpool component has been added: hugepage. This component
supports huge page allocations on linux.
- Memory pools are now allocated using "hints". Each mpool component
is queried with the hints and returns a priority. The current hints
supported are NULL (uses posix_memalign/malloc), page_size=x (huge
page mpool), and mpool=x.
- The sm mpool has been moved to common/sm. This reflects that the sm
mpool is specialized and not meant for any general
allocations. This mpool may be moved back into the mpool framework
if there is any objection.
- The opal_free_list_init arguments have been updated. The unused0
argument is not used to pass in the registration cache module. The
mpool registration flags are now rcache registration flags.
- All components have been updated to make use of the new framework
interfaces.
As this commit makes significant changes to both the mpool and rcache
frameworks both versions have been bumped to 3.0.0.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix segfault due to mca_pml_ob1_cuda_need_buffers not handling the case of the
endpoint not being there. Calling mca_bml_get_endpoint() seems to fix the problem.
Fixesopen-mpi/ompi#1402
This commit removes the --with-mpi-thread-multiple option and forces
MPI_THREAD_MULTIPLE support. This cleans up an abstration violation
in opal where OMPI_ENABLE_THREAD_MULTIPLE determines whether the
opal_using_threads is meaningful. To reduce the performance hit on
MPI_THREAD_SINGLE programs an OPAL_UNLIKELY is used for the
check on opal_using_threads in OPAL_THREAD_* macros.
This commit does not clean up the arguments to the various functions
that take whether muti-threading support is enabled. That should be
done at a later time.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
