1
1
openmpi/ompi/mca/btl/openib/btl_openib.c
Galen Shipman 3401bd2b07 Add optional ordering to the BTL interface.
This is required to tighten up the BTL semantics. Ordering is not guaranteed,
but, if the BTL returns a order tag in a descriptor (other than
MCA_BTL_NO_ORDER) then we may request another descriptor that will obey
ordering w.r.t. to the other descriptor.


This will allow sane behavior for RDMA networks, where local completion of an
RDMA operation on the active side does not imply remote completion on the
passive side. If we send a FIN message after local completion and the FIN is
not ordered w.r.t. the RDMA operation then badness may occur as the passive
side may now try to deregister the memory and the RDMA operation may still be
pending on the passive side. 

Note that this has no impact on networks that don't suffer from this
limitation as the ORDER tag can simply always be specified as
MCA_BTL_NO_ORDER.

This commit was SVN r14768.
2007-05-24 19:51:26 +00:00

1108 строки
38 KiB
C

/*
* Copyright (c) 2004-2007 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2006-2007 Mellanox Technologies. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "ompi_config.h"
#include <string.h>
#include <inttypes.h>
#include "opal/util/output.h"
#include "opal/util/if.h"
#include "opal/util/show_help.h"
#include "ompi/mca/pml/pml.h"
#include "ompi/mca/btl/btl.h"
#include "ompi/mca/btl/base/btl_base_error.h"
#include "btl_openib.h"
#include "btl_openib_frag.h"
#include "btl_openib_proc.h"
#include "btl_openib_endpoint.h"
#include "ompi/datatype/convertor.h"
#include "ompi/datatype/datatype.h"
#include "ompi/mca/mpool/base/base.h"
#include "ompi/mca/mpool/mpool.h"
#include "ompi/mca/mpool/rdma/mpool_rdma.h"
#include "ompi/runtime/params.h"
#include "orte/util/sys_info.h"
#include <errno.h>
#include <string.h>
#include <math.h>
#include <inttypes.h>
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif
#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif
mca_btl_openib_module_t mca_btl_openib_module = {
{
&mca_btl_openib_component.super,
0, /* max size of first fragment */
0, /* min send fragment size */
0, /* max send fragment size */
0, /* btl_rdma_pipeline_offset */
0, /* btl_rdma_pipeline_frag_size */
0, /* btl_min_rdma_pipeline_size */
0, /* exclusivity */
0, /* latency */
0, /* bandwidth */
0, /* TODO this should be PUT btl flags */
mca_btl_openib_add_procs,
mca_btl_openib_del_procs,
mca_btl_openib_register,
mca_btl_openib_finalize,
/* we need alloc free, pack */
mca_btl_openib_alloc,
mca_btl_openib_free,
mca_btl_openib_prepare_src,
mca_btl_openib_prepare_dst,
mca_btl_openib_send,
mca_btl_openib_put,
mca_btl_openib_get,
mca_btl_base_dump,
NULL, /* mpool */
mca_btl_openib_register_error_cb, /* error call back registration */
mca_btl_openib_ft_event
}
};
/*
* Local functions
*/
static int mca_btl_openib_size_queues( struct mca_btl_openib_module_t* openib_btl, size_t nprocs);
static int mca_btl_openib_create_cq_srq(mca_btl_openib_module_t* openib_btl);
static int mca_btl_finalize_hca(struct mca_btl_openib_hca_t *hca);
static void show_init_error(const char *file, int line,
const char *func, const char *dev)
{
if (ENOMEM == errno) {
int ret;
struct rlimit limit;
char *str_limit = NULL;
ret = getrlimit(RLIMIT_MEMLOCK, &limit);
if (0 != ret) {
asprintf(&str_limit, "Unknown");
} else if (limit.rlim_cur == RLIM_INFINITY) {
asprintf(&str_limit, "unlimited");
} else {
asprintf(&str_limit, "%ld", (long)limit.rlim_cur);
}
opal_show_help("help-mpi-btl-openib.txt", "init-fail-no-mem",
true, orte_system_info.nodename,
file, line, func, dev, str_limit);
if (NULL != str_limit) free(str_limit);
} else {
opal_show_help("help-mpi-btl-openib.txt", "init-fail-create-q",
true, orte_system_info.nodename,
file, line, func, strerror(errno), errno, dev);
}
}
/*
* add a proc to this btl module
* creates an endpoint that is setup on the
* first send to the endpoint
*/
int mca_btl_openib_add_procs(
struct mca_btl_base_module_t* btl,
size_t nprocs,
struct ompi_proc_t **ompi_procs,
struct mca_btl_base_endpoint_t** peers,
ompi_bitmap_t* reachable)
{
mca_btl_openib_module_t* openib_btl = (mca_btl_openib_module_t*)btl;
int i,j, rc;
int rem_subnet_id_port_cnt;
int lcl_subnet_id_port_cnt = 0;
int btl_rank = 0;
for(j=0; j < mca_btl_openib_component.ib_num_btls; j++){
if(mca_btl_openib_component.openib_btls[j]->port_info.subnet_id
== openib_btl->port_info.subnet_id) {
lcl_subnet_id_port_cnt++;
}
if(openib_btl == mca_btl_openib_component.openib_btls[j]) {
btl_rank = j;
}
}
for(i = 0; i < (int) nprocs; i++) {
struct ompi_proc_t* ompi_proc = ompi_procs[i];
mca_btl_openib_proc_t* ib_proc;
mca_btl_base_endpoint_t* endpoint;
if(NULL == (ib_proc = mca_btl_openib_proc_create(ompi_proc))) {
return OMPI_ERR_OUT_OF_RESOURCE;
}
rem_subnet_id_port_cnt = 0;
/* check if the remote proc has a reachable subnet first */
BTL_VERBOSE(("got %d port_infos \n", ib_proc->proc_port_count));
for(j = 0; j < (int) ib_proc->proc_port_count; j++){
BTL_VERBOSE(("got a subnet %016x\n",
ib_proc->proc_ports[j].subnet_id));
if(ib_proc->proc_ports[j].subnet_id ==
openib_btl->port_info.subnet_id) {
BTL_VERBOSE(("Got a matching subnet!\n"));
rem_subnet_id_port_cnt ++;
}
}
if(!rem_subnet_id_port_cnt ) {
/* no use trying to communicate with this endpointlater */
BTL_VERBOSE(("No matching subnet id was found, moving on.. \n"));
continue;
}
#if 0
num_endpoints = rem_subnet_id_port_cnt / lcl_subnet_id_port_cnt +
(btl_rank < (rem_subnet_id_port_cnt / lcl_subnet_id_port_cnt)) ? 1:0;
#endif
if(rem_subnet_id_port_cnt < lcl_subnet_id_port_cnt &&
btl_rank >= rem_subnet_id_port_cnt ) {
BTL_VERBOSE(("Not enough remote ports on this subnet id, moving on.. \n"));
continue;
}
OPAL_THREAD_LOCK(&ib_proc->proc_lock);
/* The btl_proc datastructure is shared by all IB BTL
* instances that are trying to reach this destination.
* Cache the peer instance on the btl_proc.
*/
endpoint = OBJ_NEW(mca_btl_openib_endpoint_t);
if(NULL == endpoint) {
OPAL_THREAD_UNLOCK(&ib_proc->proc_lock);
return OMPI_ERR_OUT_OF_RESOURCE;
}
endpoint->endpoint_btl = openib_btl;
endpoint->use_eager_rdma = openib_btl->hca->use_eager_rdma &
mca_btl_openib_component.use_eager_rdma;
endpoint->subnet_id = openib_btl->port_info.subnet_id;
rc = mca_btl_openib_proc_insert(ib_proc, endpoint);
if(rc != OMPI_SUCCESS) {
OBJ_RELEASE(endpoint);
OPAL_THREAD_UNLOCK(&ib_proc->proc_lock);
continue;
}
orte_pointer_array_add((orte_std_cntr_t*)&endpoint->index,
openib_btl->endpoints, (void*)endpoint);
ompi_bitmap_set_bit(reachable, i);
OPAL_THREAD_UNLOCK(&ib_proc->proc_lock);
peers[i] = endpoint;
}
return mca_btl_openib_size_queues(openib_btl, nprocs);
}
static int mca_btl_openib_size_queues( struct mca_btl_openib_module_t* openib_btl, size_t nprocs)
{
int min_cq_size;
int first_time = (0 == openib_btl->num_peers);
int rc;
openib_btl->num_peers += nprocs;
if(mca_btl_openib_component.use_srq) {
openib_btl->rd_num = mca_btl_openib_component.rd_num + log2(nprocs) * mca_btl_openib_component.srq_rd_per_peer;
if(openib_btl->rd_num > mca_btl_openib_component.srq_rd_max)
openib_btl->rd_num = mca_btl_openib_component.srq_rd_max;
openib_btl->rd_low = openib_btl->rd_num - 1;
min_cq_size = openib_btl->rd_num * 2 * openib_btl->num_peers;
if(!first_time) {
struct ibv_srq_attr srq_attr;
srq_attr.max_wr = openib_btl->rd_num;
rc = ibv_modify_srq(openib_btl->srq[BTL_OPENIB_HP_QP],
&srq_attr, IBV_SRQ_MAX_WR);
if(rc) {
BTL_ERROR(("cannot resize high priority shared receive queue, error: %d", rc));
return OMPI_ERROR;
}
rc = ibv_modify_srq(openib_btl->srq[BTL_OPENIB_LP_QP],
&srq_attr, IBV_SRQ_MAX_WR);
if(rc) {
BTL_ERROR(("cannot resize low priority shared receive queue, error: %d", rc));
return OMPI_ERROR;
}
}
} else
{
min_cq_size = ( mca_btl_openib_component.rd_num > (int32_t) mca_btl_openib_component.eager_rdma_num ?
mca_btl_openib_component.rd_num : (int32_t) mca_btl_openib_component.eager_rdma_num ) *
2 * openib_btl->num_peers;
}
if(min_cq_size > (int32_t) mca_btl_openib_component.ib_cq_size) {
mca_btl_openib_component.ib_cq_size = min_cq_size > openib_btl->hca->ib_dev_attr.max_cq ?
openib_btl->hca->ib_dev_attr.max_cq : min_cq_size;
#if OMPI_MCA_BTL_OPENIB_HAVE_RESIZE_CQ
if(!first_time) {
rc = ibv_resize_cq(openib_btl->ib_cq[BTL_OPENIB_LP_QP], mca_btl_openib_component.ib_cq_size);
if(rc) {
BTL_ERROR(("cannot resize low priority completion queue, error: %d", rc));
return OMPI_ERROR;
}
rc = ibv_resize_cq(openib_btl->ib_cq[BTL_OPENIB_HP_QP],
mca_btl_openib_component.ib_cq_size);
if(rc) {
BTL_ERROR(("cannot resize high priority completion queue, error: %d", rc));
return OMPI_ERROR;
}
}
#endif
}
if(first_time) {
/* never been here before, setup cq and srq */
mca_btl_openib_component.ib_cq_size = (int) mca_btl_openib_component.ib_cq_size >
openib_btl->hca->ib_dev_attr.max_cq ?
openib_btl->hca->ib_dev_attr.max_cq :
(int) mca_btl_openib_component.ib_cq_size;
return mca_btl_openib_create_cq_srq(openib_btl);
}
return OMPI_SUCCESS;
}
/*
* delete the proc as reachable from this btl module
*/
int mca_btl_openib_del_procs(struct mca_btl_base_module_t* btl,
size_t nprocs,
struct ompi_proc_t **procs,
struct mca_btl_base_endpoint_t ** peers)
{
int i,ep_index;
mca_btl_openib_module_t* openib_btl = (mca_btl_openib_module_t*) btl;
for (i=0 ; i < (int) nprocs ; i++) {
mca_btl_base_endpoint_t* del_endpoint = peers[i];
for(ep_index=0;
ep_index < orte_pointer_array_get_size(openib_btl->endpoints);
ep_index++) {
mca_btl_openib_endpoint_t* endpoint =
orte_pointer_array_get_item(openib_btl->endpoints,ep_index);
if(!endpoint) {
continue;
}
if (endpoint == del_endpoint) {
orte_pointer_array_set_item(openib_btl->endpoints,ep_index,NULL);
OBJ_RELEASE(endpoint);
}
}
}
return OMPI_SUCCESS;
}
/*
*Register callback function to support send/recv semantics
*/
int mca_btl_openib_register(
struct mca_btl_base_module_t* btl,
mca_btl_base_tag_t tag,
mca_btl_base_module_recv_cb_fn_t cbfunc,
void* cbdata)
{
mca_btl_openib_module_t* openib_btl = (mca_btl_openib_module_t*) btl;
OPAL_THREAD_LOCK(&openib_btl->ib_lock);
openib_btl->ib_reg[tag].cbfunc = cbfunc;
openib_btl->ib_reg[tag].cbdata = cbdata;
OPAL_THREAD_UNLOCK(&openib_btl->ib_lock);
return OMPI_SUCCESS;
}
/*
*Register callback function for error handling..
*/
int mca_btl_openib_register_error_cb(
struct mca_btl_base_module_t* btl,
mca_btl_base_module_error_cb_fn_t cbfunc)
{
mca_btl_openib_module_t* openib_btl = (mca_btl_openib_module_t*) btl;
openib_btl->error_cb = cbfunc; /* stash for later */
return OMPI_SUCCESS;
}
/**
* Allocate a segment.
*
* @param btl (IN) BTL module
* @param size (IN) Request segment size.
* @param size (IN) Size of segment to allocate
*
* When allocating a segment we pull a pre-alllocated segment
* from one of two free lists, an eager list and a max list
*/
mca_btl_base_descriptor_t* mca_btl_openib_alloc(
struct mca_btl_base_module_t* btl,
uint8_t order,
size_t size)
{
mca_btl_openib_frag_t* frag = NULL;
mca_btl_openib_module_t* openib_btl;
int rc;
openib_btl = (mca_btl_openib_module_t*) btl;
if(size <= mca_btl_openib_component.eager_limit){
MCA_BTL_IB_FRAG_ALLOC_EAGER(btl, frag, rc);
if(order == MCA_BTL_NO_ORDER) {
order = BTL_OPENIB_HP_QP;
}
frag->base.order = order;
} else if(size <= mca_btl_openib_component.max_send_size) {
if(order == MCA_BTL_NO_ORDER) {
order = BTL_OPENIB_LP_QP;
} else if(order != BTL_OPENIB_LP_QP) {
return NULL;
}
MCA_BTL_IB_FRAG_ALLOC_MAX(btl, frag, rc);
frag->base.order = order;
}
if(NULL == frag)
return NULL;
frag->segment.seg_len =
size <= openib_btl->super.btl_eager_limit ? size : openib_btl->super.btl_eager_limit;
frag->base.des_flags = 0;
return (mca_btl_base_descriptor_t*)frag;
}
/**
* Return a segment
*
* Return the segment to the appropriate
* preallocated segment list
*/
int mca_btl_openib_free(
struct mca_btl_base_module_t* btl,
mca_btl_base_descriptor_t* des)
{
mca_btl_openib_frag_t* frag = (mca_btl_openib_frag_t*)des;
if(((MCA_BTL_OPENIB_SEND_FRAG_FRAG == frag->type) ||
(MCA_BTL_OPENIB_RECV_FRAG_FRAG == frag->type))
&& frag->registration != NULL) {
btl->btl_mpool->mpool_deregister(btl->btl_mpool,
(mca_mpool_base_registration_t*)
frag->registration);
frag->registration = NULL;
}
MCA_BTL_IB_FRAG_RETURN(((mca_btl_openib_module_t*) btl), frag);
return OMPI_SUCCESS;
}
/**
* register user buffer or pack
* data into pre-registered buffer and return a
* descriptor that can be
* used for send/put.
*
* @param btl (IN) BTL module
* @param peer (IN) BTL peer addressing
*
* prepare source's behavior depends on the following:
* Has a valid memory registration been passed to prepare_src?
* if so we attempt to use the pre-registered user-buffer, if the memory registration
* is too small (only a portion of the user buffer) then we must reregister the user buffer
* Has the user requested the memory to be left pinned?
* if so we insert the memory registration into a memory tree for later lookup, we
* may also remove a previous registration if a MRU (most recently used) list of
* registrations is full, this prevents resources from being exhausted.
* Is the requested size larger than the btl's max send size?
* if so and we aren't asked to leave the registration pinned, then we register the memory if
* the users buffer is contiguous
* Otherwise we choose from two free lists of pre-registered memory in which to pack the data into.
*
*/
mca_btl_base_descriptor_t* mca_btl_openib_prepare_src(
struct mca_btl_base_module_t* btl,
struct mca_btl_base_endpoint_t* endpoint,
mca_mpool_base_registration_t* registration,
struct ompi_convertor_t* convertor,
uint8_t order,
size_t reserve,
size_t* size
)
{
mca_btl_openib_module_t *openib_btl;
mca_btl_openib_frag_t *frag = NULL;
mca_btl_openib_reg_t *openib_reg;
struct iovec iov;
uint32_t iov_count = 1;
size_t max_data = *size;
int rc;
openib_btl = (mca_btl_openib_module_t*)btl;
if(ompi_convertor_need_buffers(convertor) == false && 0 == reserve) {
if(registration != NULL || max_data > btl->btl_max_send_size) {
MCA_BTL_IB_FRAG_ALLOC_SEND_FRAG(btl, frag, rc);
if(NULL == frag) {
return NULL;
}
iov.iov_len = max_data;
iov.iov_base = NULL;
ompi_convertor_pack(convertor, &iov, &iov_count, &max_data);
*size = max_data;
if(NULL == registration) {
rc = btl->btl_mpool->mpool_register(btl->btl_mpool,
iov.iov_base, max_data, 0, &registration);
if(OMPI_SUCCESS != rc || NULL == registration) {
MCA_BTL_IB_FRAG_RETURN(openib_btl, frag);
return NULL;
}
/* keep track of the registration we did */
frag->registration = (mca_btl_openib_reg_t*)registration;
}
openib_reg = (mca_btl_openib_reg_t*)registration;
frag->base.des_flags = 0;
frag->base.des_src = &frag->segment;
frag->base.des_src_cnt = 1;
frag->base.des_dst = NULL;
frag->base.des_dst_cnt = 0;
frag->base.des_flags = 0;
frag->sg_entry.length = max_data;
frag->sg_entry.lkey = openib_reg->mr->lkey;
frag->sg_entry.addr = (unsigned long)iov.iov_base;
frag->segment.seg_len = max_data;
frag->segment.seg_addr.pval = iov.iov_base;
frag->segment.seg_key.key32[0] = (uint32_t)frag->sg_entry.lkey;
if(MCA_BTL_NO_ORDER == order) {
frag->base.order = BTL_OPENIB_LP_QP;
} else {
frag->base.order = order;
}
BTL_VERBOSE(("frag->sg_entry.lkey = %lu .addr = %llu "
"frag->segment.seg_key.key32[0] = %lu",
frag->sg_entry.lkey, frag->sg_entry.addr,
frag->segment.seg_key.key32[0]));
return &frag->base;
}
}
if(max_data + reserve <= btl->btl_eager_limit) {
/* the data is small enough to fit in the eager frag and
* memory is not prepinned */
MCA_BTL_IB_FRAG_ALLOC_EAGER(btl, frag, rc);
if(MCA_BTL_NO_ORDER == order) {
frag->base.order = BTL_OPENIB_LP_QP;
} else {
frag->base.order = order;
}
}
if(NULL == frag) {
/* the data doesn't fit into eager frag or eager frag is
* not available */
if(MCA_BTL_NO_ORDER == order) {
order = BTL_OPENIB_LP_QP;
} else if(BTL_OPENIB_HP_QP == order){
return NULL;
}
MCA_BTL_IB_FRAG_ALLOC_MAX(btl, frag, rc);
frag->base.order = order;
if(NULL == frag) {
return NULL;
}
if(max_data + reserve > btl->btl_max_send_size) {
max_data = btl->btl_max_send_size - reserve;
}
}
iov.iov_len = max_data;
iov.iov_base = (unsigned char*)frag->segment.seg_addr.pval + reserve;
rc = ompi_convertor_pack(convertor, &iov, &iov_count, &max_data);
if(rc < 0) {
MCA_BTL_IB_FRAG_RETURN(openib_btl, frag);
return NULL;
}
*size = max_data;
frag->segment.seg_len = max_data + reserve;
frag->segment.seg_key.key32[0] = (uint32_t)frag->sg_entry.lkey;
frag->base.des_src = &frag->segment;
frag->base.des_src_cnt = 1;
frag->base.des_dst = NULL;
frag->base.des_dst_cnt = 0;
frag->base.des_flags = 0;
return &frag->base;
}
/**
* Prepare the dst buffer
*
* @param btl (IN) BTL module
* @param peer (IN) BTL peer addressing
* prepare dest's behavior depends on the following:
* Has a valid memory registration been passed to prepare_src?
* if so we attempt to use the pre-registered user-buffer, if the memory registration
* is to small (only a portion of the user buffer) then we must reregister the user buffer
* Has the user requested the memory to be left pinned?
* if so we insert the memory registration into a memory tree for later lookup, we
* may also remove a previous registration if a MRU (most recently used) list of
* registrations is full, this prevents resources from being exhausted.
*/
mca_btl_base_descriptor_t* mca_btl_openib_prepare_dst(
struct mca_btl_base_module_t* btl,
struct mca_btl_base_endpoint_t* endpoint,
mca_mpool_base_registration_t* registration,
struct ompi_convertor_t* convertor,
uint8_t order,
size_t reserve,
size_t* size)
{
mca_btl_openib_module_t *openib_btl;
mca_btl_openib_frag_t *frag;
mca_btl_openib_reg_t *openib_reg;
int rc;
openib_btl = (mca_btl_openib_module_t*)btl;
MCA_BTL_IB_FRAG_ALLOC_RECV_FRAG(btl, frag, rc);
if(NULL == frag) {
return NULL;
}
ompi_convertor_get_current_pointer( convertor, (void**)&(frag->segment.seg_addr.pval) );
if(NULL == registration){
/* we didn't get a memory registration passed in, so we have to
* register the region ourselves
*/
rc = btl->btl_mpool->mpool_register(btl->btl_mpool,
frag->segment.seg_addr.pval, *size, 0, &registration);
if(OMPI_SUCCESS != rc || NULL == registration) {
MCA_BTL_IB_FRAG_RETURN(openib_btl, frag);
return NULL;
}
/* keep track of the registration we did */
frag->registration = (mca_btl_openib_reg_t*)registration;
}
openib_reg = (mca_btl_openib_reg_t*)registration;
frag->sg_entry.length = *size;
frag->sg_entry.lkey = openib_reg->mr->lkey;
frag->sg_entry.addr = (unsigned long) frag->segment.seg_addr.pval;
frag->segment.seg_len = *size;
frag->segment.seg_key.key32[0] = openib_reg->mr->rkey;
frag->base.des_dst = &frag->segment;
frag->base.des_dst_cnt = 1;
frag->base.des_src = NULL;
frag->base.des_src_cnt = 0;
frag->base.des_flags = 0;
if(MCA_BTL_NO_ORDER == order) {
frag->base.order = BTL_OPENIB_LP_QP;
} else {
frag->base.order = order;
}
BTL_VERBOSE(("frag->sg_entry.lkey = %lu .addr = %llu "
"frag->segment.seg_key.key32[0] = %lu",
frag->sg_entry.lkey, frag->sg_entry.addr,
frag->segment.seg_key.key32[0]));
return &frag->base;
}
static int mca_btl_finalize_hca(struct mca_btl_openib_hca_t *hca)
{
#if OMPI_ENABLE_PROGRESS_THREADS == 1
if(hca->progress) {
hca->progress = false;
if (pthread_cancel(hca->thread.t_handle)) {
BTL_ERROR(("Failed to cancel OpenIB progress thread"));
}
opal_thread_join(&hca->thread, NULL);
}
if (ibv_destroy_comp_channel(hca->ib_channel)) {
BTL_VERBOSE(("Failed to close comp_channel"));
return OMPI_ERROR;
}
#endif
#if OMPI_HAVE_POSIX_THREADS
if (pthread_cancel(hca->async_thread)) {
BTL_ERROR(("Failed to cancel OpenIB async thread"));
}
pthread_join(hca->async_thread, NULL);
#endif
if (OMPI_SUCCESS != mca_mpool_base_module_destroy(hca->mpool)) {
BTL_VERBOSE(("Failed to release mpool"));
return OMPI_ERROR;
}
if (ibv_dealloc_pd(hca->ib_pd)) {
BTL_VERBOSE(("Failed to release PD"));
return OMPI_ERROR;
}
if (ibv_close_device(hca->ib_dev_context)) {
if (ompi_mpi_leave_pinned || ompi_mpi_leave_pinned_pipeline) {
BTL_VERBOSE(("Warrning! Failed to close HCA"));
} else {
BTL_ERROR(("Error! Failed to close HCA"));
}
return OMPI_ERROR;
}
OBJ_DESTRUCT(&hca->hca_lock);
free(hca);
return OMPI_SUCCESS;
}
int mca_btl_openib_finalize(struct mca_btl_base_module_t* btl)
{
mca_btl_openib_module_t* openib_btl;
mca_btl_openib_endpoint_t* endpoint;
int ep_index, rdma_index, i;
openib_btl = (mca_btl_openib_module_t*) btl;
/* Remove the btl from component list */
if ( mca_btl_openib_component.ib_num_btls > 1 ) {
for(i = 0; i < mca_btl_openib_component.ib_num_btls; i++){
if (mca_btl_openib_component.openib_btls[i] == openib_btl){
mca_btl_openib_component.openib_btls[i] =
mca_btl_openib_component.openib_btls[mca_btl_openib_component.ib_num_btls-1];
break;
}
}
}
mca_btl_openib_component.ib_num_btls--;
/* Release eager RDMAs */
for(rdma_index=0;
rdma_index < orte_pointer_array_get_size(openib_btl->eager_rdma_buffers);
rdma_index++) {
endpoint=orte_pointer_array_get_item(openib_btl->eager_rdma_buffers,rdma_index);
if(!endpoint) {
continue;
}
OBJ_RELEASE(endpoint);
}
/* Release all QPs */
for(ep_index=0;
ep_index < orte_pointer_array_get_size(openib_btl->endpoints);
ep_index++) {
endpoint=orte_pointer_array_get_item(openib_btl->endpoints,ep_index);
if(!endpoint) {
continue;
}
OBJ_RELEASE(endpoint);
}
/* Release SRQ */
if(mca_btl_openib_component.use_srq) {
if (ibv_destroy_srq(openib_btl->srq[BTL_OPENIB_HP_QP])) {
BTL_VERBOSE(("Failed to close HP SRQ"));
return OMPI_ERROR;
}
if (ibv_destroy_srq(openib_btl->srq[BTL_OPENIB_LP_QP])) {
BTL_VERBOSE(("Failed to close LP SRQ"));
return OMPI_ERROR;
}
}
/* Release CQs */
if (ibv_destroy_cq(openib_btl->ib_cq[BTL_OPENIB_HP_QP])) {
BTL_VERBOSE(("Failed to close HP CQ %p",openib_btl->ib_cq[BTL_OPENIB_HP_QP]));
return OMPI_ERROR;
}
if (ibv_destroy_cq(openib_btl->ib_cq[BTL_OPENIB_LP_QP])) {
BTL_VERBOSE(("Failed to close LP CQ"));
return OMPI_ERROR;
}
/* Release pending lists */
MCA_BTL_OPENIB_CLEAN_PENDING_FRAGS(openib_btl,
&openib_btl->pending_frags[BTL_OPENIB_HP_QP]);
OBJ_DESTRUCT(&openib_btl->pending_frags[BTL_OPENIB_HP_QP]);
MCA_BTL_OPENIB_CLEAN_PENDING_FRAGS(openib_btl,
&openib_btl->pending_frags[BTL_OPENIB_LP_QP]);
OBJ_DESTRUCT(&openib_btl->pending_frags[BTL_OPENIB_LP_QP]);
/* Destroy free lists */
OBJ_DESTRUCT(&openib_btl->send_free[BTL_OPENIB_HP_QP]);
OBJ_DESTRUCT(&openib_btl->send_free[BTL_OPENIB_LP_QP]);
OBJ_DESTRUCT(&openib_btl->send_free_frag);
OBJ_DESTRUCT(&openib_btl->send_free_control);
OBJ_DESTRUCT(&openib_btl->recv_free[BTL_OPENIB_HP_QP]);
OBJ_DESTRUCT(&openib_btl->recv_free[BTL_OPENIB_LP_QP]);
if (!(--openib_btl->hca->btls)) {
/* All btls for the HCA were closed
* Now we can close the HCA
*/
if (OMPI_SUCCESS != mca_btl_finalize_hca(openib_btl->hca)) {
BTL_VERBOSE(("Failed to close HCA"));
return OMPI_ERROR;
}
}
OBJ_DESTRUCT(&openib_btl->ib_lock);
free(openib_btl);
BTL_VERBOSE(("Success to close BTL resources"));
#if 0
if(openib_btl->send_free_eager.fl_num_allocated !=
openib_btl->send_free_eager.super.opal_list_length){
opal_output(0, "btl ib send_free_eager frags: %d allocated %d returned \n",
openib_btl->send_free_eager.fl_num_allocated,
openib_btl->send_free_eager.super.opal_list_length);
}
if(openib_btl->send_free_max.fl_num_allocated !=
openib_btl->send_free_max.super.opal_list_length){
opal_output(0, "btl ib send_free_max frags: %d allocated %d returned \n",
openib_btl->send_free_max.fl_num_allocated,
openib_btl->send_free_max.super.opal_list_length);
}
if(openib_btl->send_free_frag.fl_num_allocated !=
openib_btl->send_free_frag.super.opal_list_length){
opal_output(0, "btl ib send_free_frag frags: %d allocated %d returned \n",
openib_btl->send_free_frag.fl_num_allocated,
openib_btl->send_free_frag.super.opal_list_length);
}
if(openib_btl->recv_free_eager.fl_num_allocated !=
openib_btl->recv_free_eager.super.opal_list_length){
opal_output(0, "btl ib recv_free_eager frags: %d allocated %d returned \n",
openib_btl->recv_free_eager.fl_num_allocated,
openib_btl->recv_free_eager.super.opal_list_length);
}
if(openib_btl->recv_free_max.fl_num_allocated !=
openib_btl->recv_free_max.super.opal_list_length){
opal_output(0, "btl ib recv_free_max frags: %d allocated %d returned \n",
openib_btl->recv_free_max.fl_num_allocated,
openib_btl->recv_free_max.super.opal_list_length);
}
#endif
return OMPI_SUCCESS;
}
/*
* Initiate a send.
*/
int mca_btl_openib_send(
struct mca_btl_base_module_t* btl,
struct mca_btl_base_endpoint_t* endpoint,
struct mca_btl_base_descriptor_t* descriptor,
mca_btl_base_tag_t tag)
{
mca_btl_openib_frag_t* frag = (mca_btl_openib_frag_t*)descriptor;
frag->endpoint = endpoint;
frag->hdr->tag = tag;
frag->wr_desc.sr_desc.opcode = IBV_WR_SEND;
return mca_btl_openib_endpoint_send(endpoint, frag);
}
/*
* RDMA WRITE local buffer to remote buffer address.
*/
int mca_btl_openib_put( mca_btl_base_module_t* btl,
mca_btl_base_endpoint_t* endpoint,
mca_btl_base_descriptor_t* descriptor)
{
int rc = OMPI_SUCCESS;
struct ibv_send_wr* bad_wr;
mca_btl_openib_frag_t* frag = (mca_btl_openib_frag_t*) descriptor;
mca_btl_openib_module_t* openib_btl = (mca_btl_openib_module_t*) btl;
/* setup for queued requests */
frag->endpoint = endpoint;
frag->wr_desc.sr_desc.opcode = IBV_WR_RDMA_WRITE;
/* check for a send wqe */
if (OPAL_THREAD_ADD32(&endpoint->sd_wqe[BTL_OPENIB_LP_QP],-1) < 0) {
OPAL_THREAD_ADD32(&endpoint->sd_wqe[BTL_OPENIB_LP_QP],1);
OPAL_THREAD_LOCK(&endpoint->endpoint_lock);
opal_list_append(&endpoint->pending_put_frags, (opal_list_item_t *)frag);
OPAL_THREAD_UNLOCK(&endpoint->endpoint_lock);
return rc;
/* post descriptor */
} else {
frag->wr_desc.sr_desc.send_flags = IBV_SEND_SIGNALED;
frag->wr_desc.sr_desc.wr.rdma.remote_addr = frag->base.des_dst->seg_addr.lval;
frag->wr_desc.sr_desc.wr.rdma.rkey = frag->base.des_dst->seg_key.key32[0];
frag->sg_entry.addr = (unsigned long) frag->base.des_src->seg_addr.pval;
frag->sg_entry.length = frag->base.des_src->seg_len;
if(ibv_post_send(endpoint->lcl_qp[BTL_OPENIB_LP_QP],
&frag->wr_desc.sr_desc,
&bad_wr)){
rc = OMPI_ERROR;
}
if(mca_btl_openib_component.use_srq) {
mca_btl_openib_post_srr(openib_btl, 1, BTL_OPENIB_HP_QP);
mca_btl_openib_post_srr(openib_btl, 1, BTL_OPENIB_LP_QP);
} else {
btl_openib_endpoint_post_rr(endpoint, 1, BTL_OPENIB_HP_QP);
btl_openib_endpoint_post_rr(endpoint, 1, BTL_OPENIB_LP_QP);
}
}
return rc;
}
/*
* RDMA READ remote buffer to local buffer address.
*/
int mca_btl_openib_get( mca_btl_base_module_t* btl,
mca_btl_base_endpoint_t* endpoint,
mca_btl_base_descriptor_t* descriptor)
{
int rc;
struct ibv_send_wr* bad_wr;
mca_btl_openib_frag_t* frag = (mca_btl_openib_frag_t*) descriptor;
mca_btl_openib_module_t* openib_btl = (mca_btl_openib_module_t*) btl;
frag->endpoint = endpoint;
frag->wr_desc.sr_desc.opcode = IBV_WR_RDMA_READ;
/* check for a send wqe */
if (OPAL_THREAD_ADD32(&endpoint->sd_wqe[BTL_OPENIB_LP_QP],-1) < 0) {
OPAL_THREAD_ADD32(&endpoint->sd_wqe[BTL_OPENIB_LP_QP],1);
OPAL_THREAD_LOCK(&endpoint->endpoint_lock);
opal_list_append(&endpoint->pending_get_frags, (opal_list_item_t*)frag);
OPAL_THREAD_UNLOCK(&endpoint->endpoint_lock);
return OMPI_SUCCESS;
/* check for a get token */
} else if(OPAL_THREAD_ADD32(&endpoint->get_tokens,-1) < 0) {
OPAL_THREAD_ADD32(&endpoint->sd_wqe[BTL_OPENIB_LP_QP],1);
OPAL_THREAD_ADD32(&endpoint->get_tokens,1);
OPAL_THREAD_LOCK(&endpoint->endpoint_lock);
opal_list_append(&endpoint->pending_get_frags, (opal_list_item_t*)frag);
OPAL_THREAD_UNLOCK(&endpoint->endpoint_lock);
return OMPI_SUCCESS;
} else {
frag->wr_desc.sr_desc.send_flags = IBV_SEND_SIGNALED;
frag->wr_desc.sr_desc.wr.rdma.remote_addr = frag->base.des_src->seg_addr.lval;
frag->wr_desc.sr_desc.wr.rdma.rkey = frag->base.des_src->seg_key.key32[0];
frag->sg_entry.addr = (unsigned long) frag->base.des_dst->seg_addr.pval;
frag->sg_entry.length = frag->base.des_dst->seg_len;
if(ibv_post_send(endpoint->lcl_qp[BTL_OPENIB_LP_QP],
&frag->wr_desc.sr_desc,
&bad_wr)){
BTL_ERROR(("error posting send request errno (%d) says %s", errno, strerror(errno)));
rc = ORTE_ERROR;
} else {
rc = ORTE_SUCCESS;
}
if(mca_btl_openib_component.use_srq) {
mca_btl_openib_post_srr(openib_btl, 1, BTL_OPENIB_HP_QP);
mca_btl_openib_post_srr(openib_btl, 1, BTL_OPENIB_LP_QP);
} else {
btl_openib_endpoint_post_rr(endpoint, 1, BTL_OPENIB_HP_QP);
btl_openib_endpoint_post_rr(endpoint, 1, BTL_OPENIB_LP_QP);
}
}
return rc;
}
/*
* create both the high and low priority completion queues
* and the shared receive queue (if requested)
*/
int mca_btl_openib_create_cq_srq(mca_btl_openib_module_t *openib_btl)
{
/* Allocate Protection Domain */
openib_btl->poll_cq = false;
if (mca_btl_openib_component.use_srq) {
struct ibv_srq_init_attr attr;
attr.attr.max_wr = mca_btl_openib_component.srq_rd_max;
attr.attr.max_sge = mca_btl_openib_component.ib_sg_list_size;
openib_btl->srd_posted[BTL_OPENIB_HP_QP] = 0;
openib_btl->srd_posted[BTL_OPENIB_LP_QP] = 0;
openib_btl->srq[BTL_OPENIB_HP_QP] =
ibv_create_srq(openib_btl->hca->ib_pd, &attr);
if (NULL == openib_btl->srq[BTL_OPENIB_HP_QP]) {
show_init_error(__FILE__, __LINE__, "ibv_create_srq",
ibv_get_device_name(openib_btl->hca->ib_dev));
return OMPI_ERROR;
}
openib_btl->srq[BTL_OPENIB_LP_QP] =
ibv_create_srq(openib_btl->hca->ib_pd, &attr);
if (NULL == openib_btl->srq[BTL_OPENIB_LP_QP]) {
show_init_error(__FILE__, __LINE__, "ibv_create_srq",
ibv_get_device_name(openib_btl->hca->ib_dev));
return OMPI_ERROR;
}
} else {
openib_btl->srq[BTL_OPENIB_HP_QP] = NULL;
openib_btl->srq[BTL_OPENIB_LP_QP] = NULL;
}
/* Create the low and high priority queue pairs */
#if OMPI_ENABLE_PROGRESS_THREADS == 1
#if OMPI_MCA_BTL_OPENIB_IBV_CREATE_CQ_ARGS == 3
openib_btl->ib_cq[BTL_OPENIB_LP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, openib_btl->hca->ib_channel);
#else
openib_btl->ib_cq[BTL_OPENIB_LP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, openib_btl, openib_btl->hca->ib_channel, 0);
#endif
#else /* OMPI_ENABLE_PROGRESS_THREADS DISABLED */
#if OMPI_MCA_BTL_OPENIB_IBV_CREATE_CQ_ARGS == 3
openib_btl->ib_cq[BTL_OPENIB_LP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, NULL);
#else
openib_btl->ib_cq[BTL_OPENIB_LP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, NULL, NULL, 0);
#endif
#endif /* OMPI_ENABLE_PROGRESS_THREADS */
if (NULL == openib_btl->ib_cq[BTL_OPENIB_LP_QP]) {
show_init_error(__FILE__, __LINE__, "ibv_create_cq",
ibv_get_device_name(openib_btl->hca->ib_dev));
return OMPI_ERROR;
}
#if OMPI_ENABLE_PROGRESS_THREADS == 1
if(ibv_req_notify_cq(openib_btl->ib_cq[BTL_OPENIB_LP_QP], 0)) {
show_init_error(__FILE__, __LINE__, "ibv_req_notify_cq",
ibv_get_device_name(openib_btl->hca->ib_dev));
return OMPI_ERROR;
}
#if OMPI_MCA_BTL_OPENIB_IBV_CREATE_CQ_ARGS == 3
openib_btl->ib_cq[BTL_OPENIB_HP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, openib_btl->hca->ib_channel);
#else
openib_btl->ib_cq[BTL_OPENIB_HP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, openib_btl, openib_btl->hca->ib_channel, 0);
#endif
#else /* OMPI_ENABLE_PROGRESS_THREADS DISABLED */
#if OMPI_MCA_BTL_OPENIB_IBV_CREATE_CQ_ARGS == 3
openib_btl->ib_cq[BTL_OPENIB_HP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, NULL);
#else
openib_btl->ib_cq[BTL_OPENIB_HP_QP] =
ibv_create_cq(openib_btl->hca->ib_dev_context,
mca_btl_openib_component.ib_cq_size, NULL, NULL, 0);
#endif
#endif /* OMPI_ENABLE_PROGRESS_THREADS */
if(NULL == openib_btl->ib_cq[BTL_OPENIB_HP_QP]) {
show_init_error(__FILE__, __LINE__, "ibv_create_cq",
ibv_get_device_name(openib_btl->hca->ib_dev));
return OMPI_ERROR;
}
#if OMPI_ENABLE_PROGRESS_THREADS == 1
if(ibv_req_notify_cq(openib_btl->ib_cq[BTL_OPENIB_HP_QP], 0)) {
show_init_error(__FILE__, __LINE__, "ibv_req_notify_cq",
ibv_get_device_name(openib_btl->hca->ib_dev));
return OMPI_ERROR;
}
OPAL_THREAD_LOCK(&openib_btl->hca->hca_lock);
if (!openib_btl->hca->progress){
int rc;
openib_btl->hca->progress = true;
if(OPAL_SUCCESS != (rc = opal_thread_start(&openib_btl->hca->thread))) {
BTL_ERROR(("Unable to create progress thread, retval=%d", rc));
return rc;
}
}
OPAL_THREAD_UNLOCK(&openib_btl->hca->hca_lock);
#endif
return OMPI_SUCCESS;
}
int mca_btl_openib_ft_event(int state) {
if(OPAL_CRS_CHECKPOINT == state) {
;
}
else if(OPAL_CRS_CONTINUE == state) {
;
}
else if(OPAL_CRS_RESTART == state) {
;
}
else if(OPAL_CRS_TERM == state ) {
;
}
else {
;
}
return OMPI_SUCCESS;
}