ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
14 918 коммитов 3 Ветки 0 Теги 130 MiB
fc4cb0c0c1
Граф коммитов

2186 Коммитов

Автор SHA1 Сообщение Дата
Abhishek Kulkarni
9c5860706f Merge improvements to the "notifier" framework from the OPAL SOS and the ORTE WDC mercurial branches into the SVN trunk. 
A brief description of the improvements can be found at
https://svn.open-mpi.org/trac/ompi/wiki/ORTEWDC#ChangesdonetotheORTEnotifier

This commit was SVN r23157.
 2010-05-17 22:48:05 +00:00
Abhishek Kulkarni
f5b9bc4ff1 Add a new "HNP" component to the notifier framework. 
This component proxies notification messages up to the HNP.  This
component runs in both the HNP and non-HNP processes for ease of
selection (e.g., so you can "--mca notifier hnp" (vs. "--mca
notifier hnp,non_hnp").  It auto-detects where it is running and
does the Right Thing -- if it's in the HNP process, it sets up to
receive incoming proxied messages.  If it's not in the HNP, then it
proxies all messages to the HNP.

This commit was SVN r23156.
 2010-05-17 22:43:43 +00:00
Abhishek Kulkarni
197ec7586d Add a new "file" component to the notifier framework. 
When this component is selected, the notification messages are sent to a file. 
The file can be a plain file or stdout or stderr.

The MCA parameter "notifier_file_name" can be used to specify the suffix of the file the notification messages should be sent to.
The default suffix is "wdc" and the file full name is "output-wdc".

This commit was SVN r23155.
 2010-05-17 22:39:52 +00:00
Ralph Castain
7e6985edbf Cleanup warnings 
This commit was SVN r23150.
 2010-05-16 20:23:26 +00:00
Ralph Castain
de85049477 Cleanup warnings 
This commit was SVN r23149.
 2010-05-16 20:22:18 +00:00
Ralph Castain
88f5217a12 Cleanup the debugger daemon co-launch code and add an ability to test it. Implement ability to co-launch debugger daemons upon attach to a running job for jobs launched under rsh, slurm, and tm environments (others can easily be added if desired). 
Add new mca params to test:

orte_debugger_test_daemon: Name of the executable to be used to simulate a debugger colaunch
orte_debugger_test_attach: Test debugger colaunch after debugger attachment

To test co-launch at job start, just set the orte_debugger_test_daemon param.

To test co-launch upon attach:
set orte_debugger_test_daemon
set orte_debugger_test_attach=1
set orte_enable_debug_cospawn_while_running=1
set orte_debugger_check_rate=<N> - defines the number of seconds to wait before "checking" for a debugger attaching

Added a "debugger" program to orte/test/mpi that just spins to simulate a debugger daemon.

This commit was SVN r23144.
 2010-05-14 18:44:49 +00:00
Ralph Castain
b9f0615727 Correct some logic for tracking launch progress 
This commit was SVN r23122.
 2010-05-12 18:39:10 +00:00
Ralph Castain
7ce34223f1 Per off-list discussion, implement the new OMPI exit status policy (soon to be on wiki) and further cleanup error reporting to cover new cases. 
Implement process migration when failed nodes are detected. Some testing still required

This commit was SVN r23121.
 2010-05-12 18:11:58 +00:00
Ralph Castain
306533fdb8 Replace a missing line that shutdown a peer that failed comm. 
This commit was SVN r23120.
 2010-05-12 18:09:35 +00:00
Ralph Castain
871f445848 Ignore nodes that are "down" when generating maps 
This commit was SVN r23119.
 2010-05-12 18:08:40 +00:00
Ralph Castain
4bd25f587c Begin handling the case of lost connections by having the OOB report it to the errmgr instead of the routed framework. Add an "app" component to t 
he errmgr framework so that it can decide how to respond - which for now at least is just to check for lifeline and abort if so.

Add a new error constant to indicate that the error is "unrecoverable" so the oob can know it needs to abort.

This commit was SVN r23112.
 2010-05-11 00:34:12 +00:00
Ralph Castain
86033074ce Grr...it's a job state, not a proc state 
This commit was SVN r23110.
 2010-05-07 16:50:10 +00:00
Ralph Castain
70bef5ca95 It is possible for the jdata param to be NULL, so protect the verbose output in that case 
This commit was SVN r23109.
 2010-05-07 16:48:44 +00:00
Shiqing Fan
8ea8563462 Include the new component config file for Windows into tarball. 
This commit was SVN r23108.
 2010-05-07 14:30:12 +00:00
Ralph Castain
d6a1d7a082 Little more cleanup on paffinity. Provide a specific error code for affinity not supported so we can better report the problem. Move the error reporting to orterun so we only get one error message. Update the darwin paffinity module to return the correct new error codes. 
This commit was SVN r23107.
 2010-05-07 14:04:55 +00:00
Ralph Castain
d4f56cff61 More cleanup on paffinity....groan 
It is okay to not have a paffinity module IF you aren't using paffinity anyway. So don't error out of MPI_Init because a paffinity module wasn't selected.

Cleanup error reporting in the odls default module to (once and for all!) eliminate messages originating in the fork'd process. Create some new error codes to allow us to pass enough info back to the parent process to provide useful error messages.

This commit was SVN r23106.
 2010-05-06 20:57:17 +00:00
Jeff Squyres
477201e161 Fix "make dist" breakage 
This commit was SVN r23105.
 2010-05-06 18:47:20 +00:00
Shiqing Fan
76726f6094 Update a few module configuration for Windows. 
This commit was SVN r23104.
 2010-05-05 12:22:04 +00:00
Ralph Castain
2ff1ae13e1 Create a new "heartbeat" module in the sensor framework and move the plm_base heartbeat code there. Add new proc and job states for heartbeat_failed. Remove the "heartbeat" cmd line option for orted as this is now done automatically if the --enable-heartbeat configure option is set. 
This commit was SVN r23102.
 2010-05-05 00:48:43 +00:00
Ralph Castain
99f223210d Add some contributed examples of how to start and configure the spread library. Do a little more cleanup on the spread module, and ensure that it isn't selected if spread isn't running. 
This commit was SVN r23101.
 2010-05-04 23:44:00 +00:00
Ralph Castain
43005b88e0 Catch one more spot...thanks to Sam for reporting it 
This commit was SVN r23094.
 2010-05-04 17:21:15 +00:00
Ralph Castain
cd569f8a79 Restore the global restart capability 
This commit was SVN r23089.
 2010-05-04 02:40:29 +00:00
Ralph Castain
8c5f442ee0 Fix some bugs in the spread rmcast component 
This commit was SVN r23086.
 2010-05-04 02:38:37 +00:00
Ralph Castain
8e7faf9119 Add a new test for the db framework, fix some minor bugs in the daemon module 
This commit was SVN r23085.
 2010-05-04 02:38:11 +00:00
Ralph Castain
9dfb5c7c62 Rename the orte state framework to be "db", which more accurately reflects its overall capabilities since it can store any kind of data (not just state, although that will be its primary purpose). Update tools and tests accordingly. Add a daemon module for storing data on the daemons - requires --enable-multicast, so it won't build unless that is set 
This commit was SVN r23082.
 2010-05-03 04:11:03 +00:00
Ralph Castain
5103ffead6 Continue work on local recovery for orteds 
This commit was SVN r23080.
 2010-05-03 04:08:13 +00:00
Ralph Castain
bcff0d6301 Some minor cleanup in the rmcast framework, ensure that a default multicast group is always defined for each app 
This commit was SVN r23079.
 2010-05-03 04:07:14 +00:00
Ralph Castain
f994a7edf4 Add recovery data to the jobdat object 
This commit was SVN r23078.
 2010-05-03 04:06:13 +00:00
Ralph Castain
323224b84b Allow the restart data to be retrieved from a job's app->env or default that given to orterun 
This commit was SVN r23077.
 2010-05-03 04:05:19 +00:00
Ralph Castain
3f262bf0b6 Add a new reliable multicast component based on the "spread" library 
Thanks to Srini Nariangadu (Cisco) for the contribution!

This commit was SVN r23076.
 2010-05-02 17:29:41 +00:00
Ralph Castain
c93af95351 Since there is no defined behavior for the case where all application procs exit normally, but some or all have non-zero returns, just output a warning telling the user how many procs meet that criteria. Let the return code of mpirun in that scenario reflect any errors in OMPI/ORTE itself. 
Clearly a temporary solution until a defined behavior can be established.

This commit was SVN r23075.
 2010-04-30 19:01:10 +00:00
Ralph Castain
c62418d76d Add a new test that checks behavior when we call exit with a non-zero return code after calling finalize - don't ask why. 
Modify the check_complete code so it finds the first non-zero exit status (i.e., the one from the lowest rank) in a job that terminates normally, and sets the mpirun exit code to that status.

This commit was SVN r23071.
 2010-04-29 19:58:44 +00:00
Ralph Castain
5689bd6d30 Remove debug 
This commit was SVN r23062.
 2010-04-28 22:14:23 +00:00
Ralph Castain
319758e3e0 Restore process recovery for procs local to mpirun (first step towards restoring full capability). Define three new MCA params: 
1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis

2. orte_max_local_restarts - default max number of local restarts, can be overridden

3. orte_max_global_restarts - default max number of relocates, can be overridden

Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code.

This commit was SVN r23057.
 2010-04-28 04:06:57 +00:00
Ralph Castain
401fb22847 Fix the pack/unpack of process state values by getting the actual packing size to match the new value size. 
Improve the debug output by printing the string

This commit was SVN r23048.
 2010-04-27 15:58:04 +00:00
Ralph Castain
efc7d3e2f6 Update the LSF PLM module to ensure that the path is correctly passed. 
Many thanks to Teng Lin for the error report - and the patch!

This commit was SVN r23047.
 2010-04-27 03:46:04 +00:00
Ralph Castain
55889934d8 After hours spent chasing the stupid "abort" file, it became clear that we were always going to be plagued by that idiot contraption when trying to be good citizens and properly cleanup. So get rid of it by instead doing a messaging handshake with the local daemon. 
Note that this isn't a problem since MPI_Abort and orte_abort are only called under controlled circumstances - i.e., we are doing an orderly abort and not segfaulting. If we can't get the message out for some reason, then too bad - we'll still see an abnormal process termination and act accordingly.

This commit was SVN r23045.
 2010-04-27 03:39:32 +00:00
Ralph Castain
b9893aacc5 Add a sensor framework to ORTE that monitors applications and notifies the errmgr when they exceed specified boundaries. Two modules are included here: 
1. file activity - can monitor file size, access and modification times. If these fail to change over a specified number of sampling iterations (rate is an mca param), then the errmgr is notified.

2. memory usage - checks amount of memory used by a process. Limit and sampling rate can be set.

This support must be enabled by configuring --enable-sensors.

ompi_info and orte-info have been updated to include the new framework.

Also includes some initial steps toward restoring the recovery capability. Most notably, the ODLS API has been extended to include a "restart_proc" entry for restarting a local process, and organizes the various ERRMGR framework globals into a single struct as we do in the other ORTE frameworks. Fix an oversight in the ERRMGR framework where a pointer array was constructed, but not initialized.

Implementation continues.

This commit was SVN r23043.
 2010-04-26 22:15:57 +00:00
Ralph Castain
43a89bbace Extend the process and job states by adding values for exceeding sensor bounds. This changes the job state field to 32-bit to also provide room for future expansion. 
This commit was SVN r23036.
 2010-04-26 12:36:40 +00:00
Ralph Castain
e3164d2ac1 For the autogen-challenged (i.e., Jeff), create a new ORTE constant that tells the user that a required module was not found. Update the errmgr select function to output the error if no module is found. 
This commit was SVN r23032.
 2010-04-24 01:39:26 +00:00
Ralph Castain
b62ebb8b94 Enable these to build so others can more easily begin implementation 
This commit was SVN r23031.
 2010-04-23 22:46:33 +00:00
Ralph Castain
9c69900bbc Ensure we get the jdata object when updating proc state so we don't segv if report-progress is set. Thanks to Sam for reporting it! 
This commit was SVN r23029.
 2010-04-23 15:14:21 +00:00
George Bosilca
95394456ca No Windows EOF. 
This commit was SVN r23024.
 2010-04-23 05:51:29 +00:00
Ralph Castain
efbb5c9b7c Revamp the errmgr framework to provide a greater range of optional behaviors, including different behaviors for daemons, and remove several looping messages across the code base: 
* add hnp and orted modules to the errmgr framework. The HNP module contains much of the code that was in the errmgr base since that code could only be executed by the HNP anyway.

* update the odls to report process states directly into the active errmgr module, thus removing the need to send messages looped back into the odls cmd processor. Let the active errmgr module decide what to do at various states.

* remove the code to track application state progress from the plm_base_launch_support.c code. Update the plm modules to call the errmgr directly when a launch fails.

* update the plm_base_receive.c code to call the errmgr with state updates from remote daemons

* update the routed modules to reflect that process state is updated in the errmgr

* ensure that the orted's open the errmgr and select their appropriate module

* add new pretty-print utilities to print process and job state. Move the pretty-print of time info to a globally-accessible place

* define a global orte_comm function to send messages from orted's to the HNP so that others can overlay the standard RML methods, if desired.

* update the orterun help output to reflect that the "term w/o sync" error message can result from three, not two, scenarios

This commit was SVN r23023.
 2010-04-23 04:44:41 +00:00
Ralph Castain
86228aee38 Provide two new opal paffinity utilities for printing a hex representation of the cpu set and parsing that string back into a cpu set on the other end. Also add a new MCA param for passing the cpu set applied to a process during launch down to that process so it can know what we attempted to do. 
All to be used in some new MPI extensions provided by Jeff so that users can easily query their binding situation.

This commit was SVN r22998.
 2010-04-19 22:16:35 +00:00
Ralph Castain
4d06125a33 Establish a method by which a process knows if it has been bound by mpirun. This helps resolve a problem where a process gets "bound" to all available resources, which looks to the opal paffinity system as "not bound". This can cause mpi_init to attempt to "bind" the process itself, causing unintended behavior. 
This commit was SVN r22985.
 2010-04-17 01:58:26 +00:00
Ralph Castain
41428e6b61 Issue a warning if a requested binding operation results in processes being bound to all available processes, which is the equivalent of not being bound at all. 
See the following email thread for further details:

http://www.open-mpi.org/community/lists/devel/2010/04/7745.php

This commit was SVN r22984.
 2010-04-17 01:02:41 +00:00
Ralph Castain
6c379fed2e IOF components should not assume they will be selected when queried - thus, they should not perform init functions until after selection. Create init/finalize entry points for that purpose, and have select init the module after it has been selected. 
This commit was SVN r22982.
 2010-04-16 18:51:27 +00:00
Ralph Castain
2ecc9fc2b3 Additional diag output 
This commit was SVN r22981.
 2010-04-16 14:48:37 +00:00
Ralph Castain
4308922f59 Ensure that any application-specific selection of ess module doesn't get overridden by what is given to the orted or orterun 
Cleanup tool name determination for CM

This commit was SVN r22980.
 2010-04-15 18:10:50 +00:00
Ralph Castain
c3e4c40cdf Add another multicast tag for updating state 
This commit was SVN r22979.
 2010-04-15 18:08:53 +00:00
Ralph Castain
eeccf2f15c Some minor changes to support vm's 
This commit was SVN r22975.
 2010-04-14 01:20:43 +00:00
Ralph Castain
854dc12fc0 Add a tag for multicasting IOF messages 
This commit was SVN r22972.
 2010-04-13 22:51:26 +00:00
Ralph Castain
81329c637e Indentation corrections 
This commit was SVN r22971.
 2010-04-13 17:47:34 +00:00
Ralph Castain
8da781af84 Continue developing support for distributed virtual machines - minor changes to ensure correct jobid gets used and that dvm's can communicate with tools 
This commit was SVN r22958.
 2010-04-12 22:33:09 +00:00
Shiqing Fan
96b20a29b5 An easy solution to make singleton work on Windows. 
This commit was SVN r22952.
 2010-04-10 16:30:59 +00:00
Ralph Castain
d3ed4e68b7 Utilize a non-used mapping policy bit to define a policy that uses only existing alive daemons to support virtual machines and restarting processes on already-active nodes 
This commit was SVN r22951.
 2010-04-10 05:02:47 +00:00
Ralph Castain
4f8279df3d Enable substitution of the communication calls in the orted when sending messages back to the HNP by creating a function for this purpose and saving the pointer to it in orte_odls_base. Higher level libraries can then override the default function to use their own method. 
This commit was SVN r22950.
 2010-04-09 18:50:10 +00:00
Terry Dontje
282a537cf7 This commit fixes 2370, by having the solaris paffinity module return error codes for get_physical_processor_id and having odls_default_fork_local_proc check get_physical_processor_id for OPAL_ERROR 
This commit was SVN r22948.
 2010-04-09 15:10:46 +00:00
Brad Benton
101b896f2e IBM has approved the release of the LoadLeveler sample code under the 
BSD license.  Consequently, a more restrictive licensing clause that was 
originally associated with the LoadLeveler sample code documentation and
replicated in a comment block in this file has been removed.

This commit was SVN r22947.
 2010-04-08 19:41:44 +00:00
Terry Dontje
929c58e38d This commit fixes trac:2073 
This commit was SVN r22946.

The following Trac tickets were found above:
  Ticket 2073 --> https://svn.open-mpi.org/trac/ompi/ticket/2073
 2010-04-08 18:17:44 +00:00
Ralph Castain
75e99e6118 Do a better job of selecting cm ess component, handle tool and daemon issues 
This commit was SVN r22942.
 2010-04-07 18:59:21 +00:00
Ralph Castain
f1fc344336 Add some diagnostics 
This commit was SVN r22941.
 2010-04-07 18:58:17 +00:00
Ralph Castain
8e29a6858a Properly handle the case when a daemon is given both parts of its name 
This commit was SVN r22935.
 2010-04-06 22:41:18 +00:00
Ralph Castain
a1e82e9d05 Per discussion with Josh, cleanup the errmgr API by creating separate modules for the public vs internal APIs. This mirrors the architecture used in other frameworks that had similar requirements. 
Remove the orcm errmgr module - moving to the orcm code base so it can utilize orcm communications and not interfere with ompi-related operations.

This commit was SVN r22931.
 2010-04-05 22:59:21 +00:00
Ralph Castain
1caba7af2f Fix a bunch of compiler warnings reported by Jeff 
This commit was SVN r22930.
 2010-04-03 00:20:19 +00:00
Ralph Castain
84c7973df8 Update the #procs in the job prior to assigning vpids for each app_context. 
This commit was SVN r22929.
 2010-04-03 00:03:35 +00:00
Ralph Castain
6b43b76f9d Some updates required for generating a LAM-style virtual machine. Retain the local node if requested. Properly setup the daemon job map for a VM launch. 
This commit was SVN r22928.
 2010-04-03 00:03:01 +00:00
Ralph Castain
ed0f42fa49 Fix a bug courtesy of Jeff - since check_job_complete removes the child object and releases it, preserve the pointer to the next item on the list prior to working with it 
This commit was SVN r22924.
 2010-04-02 07:08:34 +00:00
Josh Hursey
62f8d3c471 r22885 missed a few symbol updates when it changed ompi_want_ft to opal_want_ft 
This commit was SVN r22916.

The following SVN revision numbers were found above:
  r22885 --> open-mpi/ompi@522a23d6a3
 2010-03-30 16:47:39 +00:00
Ralph Castain
f6bfaa76ba Add some debug output to job_complete. If no session dirs were created, then cannot check for abort file - which wouldn't be created anyway 
This commit was SVN r22903.
 2010-03-29 23:21:03 +00:00
Ralph Castain
2603bd8a47 Eliminate a race condition (first reported by Josh) when deliberately killing procs. Need to cancel the waitpid callback for the proc, then properly flag it as dead (both not-alive and waitpid-fired) so that the system cleans up properly. 
This commit was SVN r22900.
 2010-03-28 16:08:05 +00:00
Ralph Castain
4f9db20d94 Couple of minor cleanups 
This commit was SVN r22899.
 2010-03-28 15:41:27 +00:00
Ralph Castain
522a23d6a3 A few changes to the FT-related configure options: 
1. fix a bug that caused an infinite loop in configure when specifying want-ft but not want-ft-thread by removing a stale reference to the opal-progress-thread option

2. add want-ft=orcm so we can build the orcm errmgr component

3. cleanup the use of "ompi_want_ft_xxx" and replace it with "opal_want_ft_xxx" so that naming conventions are preserved

This commit was SVN r22885.
 2010-03-25 22:53:48 +00:00
Josh Hursey
e4f2d03d28 ErrMgr Framework redesign to better support fault tolerance development activities. 
Explained in more detail in the following RFC:
  http://www.open-mpi.org/community/lists/devel/2010/03/7589.php

This commit was SVN r22872.
 2010-03-23 21:28:02 +00:00
Ralph Castain
0b9552cd4e Expand the ESS framework's API to include a new function "query_sys_info" that allows the caller to retrieve key-value pairs of info on the local system capabilities (e.g., cpu type/model). Have each daemon and the HNP "sense" that information and provide it to their local procs to avoid having every proc querying the system directly. 
This commit was SVN r22870.
 2010-03-23 20:47:41 +00:00
Ralph Castain
62e751a95c Add a tag 
This commit was SVN r22862.
 2010-03-22 15:46:00 +00:00
Ralph Castain
d49f93b743 Cleanup the initialization handshake for multicast apps 
This commit was SVN r22855.
 2010-03-19 20:15:01 +00:00
Ralph Castain
74bd4adc6b Add some diagnostics, correctly check for existing channel 
This commit was SVN r22854.
 2010-03-19 08:21:01 +00:00
Ralph Castain
abbdc2b527 Pass the job family to tools that need to connect to specific HNPs 
This commit was SVN r22853.
 2010-03-19 04:01:33 +00:00
Ralph Castain
a479e6c320 Provide the sender's name for blocking recv's 
This commit was SVN r22852.
 2010-03-19 04:00:34 +00:00
Ralph Castain
e291fc2c69 With Jeff's help, get the libraries to link as required. 
Update ompi_info and orte-info to include the new framework.

Fix some selection logic and a typo'd variable name

Still remains ompi_ignored until we complete testing

This commit was SVN r22848.
 2010-03-18 02:12:59 +00:00
Ralph Castain
3cd96928a9 Use the OMPI_CHECK_PACKAGE macro to check both header file and library existence before building the component. 
Still haven't gotten the right libraries linked in...so add ompi_ignore/unignore until we get it all fully integrated.

This commit was SVN r22843.
 2010-03-17 00:46:12 +00:00
Ralph Castain
ffd5be6aa1 Add a new framework to ORTE for saving and recovering state information. Two components are included that use the db or dbm library for storing the data, with a distributed hash table component coming later. 
Note that each of these components will only be selected if specifically requested - otherwise, a "NULL" component will be used.  The framework is only opened by the HNP and orteds, though neither is currently coded to save/restore state

This commit was SVN r22839.
 2010-03-16 20:59:48 +00:00
Rainer Keller
814fb9399f - Further patches for support on NetBSD (and DragonFly) by 
Aleksej Saushev.
   Dont use bash or bashism in shell scripts
   We should use Posix' setpgid(0,0), which is equivalent to setpgrp().

This commit was SVN r22829.
 2010-03-15 05:33:42 +00:00
Josh Hursey
e9b5162d79 Fix the configure logic for --with-ft so that it properly takes a comma separated list. 
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.

The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.

This commit was SVN r22824.
 2010-03-12 23:57:50 +00:00
Josh Hursey
b43d621f30 Remove an errant '$' in the configure.m4 files. Was causing problems with configure. 
This commit was SVN r22821.
 2010-03-12 20:08:22 +00:00
Ralph Castain
7105207b1c If we only have one app participating in a all_gather (which lies under a modex as well), then we need to ensure that the returned buffer has the proper packing order so it can be unpacked correctly. 
This commit was SVN r22815.
 2010-03-10 19:22:06 +00:00
Ralph Castain
7ebf72b4aa Trivial cleanup 
This commit was SVN r22813.
 2010-03-10 18:24:38 +00:00
Ralph Castain
7fd7b7a8cc Fix the load_balance mapper so that it sets the #procs in the job before attempting to compute vpids 
This commit was SVN r22812.
 2010-03-10 17:52:19 +00:00
Ralph Castain
17936e6e5f Ensure we cleanly terminate if an executable cannot be found 
This commit was SVN r22805.
 2010-03-10 16:45:08 +00:00
Josh Hursey
b73237c92a Identify the process sending the update in the verbose message (helps debugging of process control). 
This commit was SVN r22804.
 2010-03-10 00:23:24 +00:00
Ralph Castain
4355134991 Let the vm launcher specify the mapping policy 
This commit was SVN r22797.
 2010-03-08 19:13:21 +00:00
Ralph Castain
bfa39d7f7e Update the seq mapper to support lists from -host. Reorg the dash_host code to provide an ordered list as required by the seq mapper 
This commit was SVN r22795.
 2010-03-08 09:54:49 +00:00
Ralph Castain
9e7f621a98 Port Brad's paffinity change to the 1.4 branch over to the trunk so we don't lose it going forward. 
This commit was SVN r22794.
 2010-03-07 18:44:22 +00:00
Ralph Castain
2a0f7e95ee Don't double account for the killed local proc - only adjust num_local_procs when the proc actually dies. 
This commit was SVN r22787.
 2010-03-05 13:53:18 +00:00
Ralph Castain
b2e24693c4 Check the return status when we forward stdin and remove the recipient when they are no longer alive 
This commit was SVN r22786.
 2010-03-05 13:41:28 +00:00
Ralph Castain
f2c65dc70f Ensure that the errmgr does not take action if the process was terminated by a "kill_procs" command as this can lead to circular logic. 
Cleanup the kill_procs command by removing a no-longer-used param. We update the process state when the proc actually exits.

This commit was SVN r22783.
 2010-03-05 13:22:12 +00:00
Ralph Castain
ef6c432e22 Fix a nasty bug where we would hang if an application trapped signals such as SIGTERM - a permissible thing to do. In such cases, we removed the process from the waitpid system and then sent it a SIGTERM. If the application trapped that and attempted to cleanly terminate, it would send us a sync message - and the daemon would then add it back to its local child list, causing both the daemon and the process to hang. 
In this revision, we let the process terminate/exit however it can, and then pick it up via the usual waitpid.

This commit was SVN r22781.
 2010-03-05 04:14:56 +00:00
Shiqing Fan
db747e4390 Remove the old timing parameter but using orte_timing instead. Thanks for Rainer. 
This commit was SVN r22775.
 2010-03-04 15:00:03 +00:00
Ralph Castain
c88fe1ea54 Create a new mca parameter to control creation of session directories. Defaults to true so that the current behavior of always creating them is preserved. If set to false (0), then don't create session directories. Helps in those environments where session directories are a problem. 
Tell the sm btl that it cannot run if no session directories were created.

This commit was SVN r22756.
 2010-03-02 15:18:33 +00:00
Ralph Castain
cd1efbb41e Try and do a better job of cleanup in abnormal termination. Ensure the daemons whack session directories prior to disabling signal traps. Ensure that the HNP and daemons all cleanup when they are doing an internal abort. 
This commit was SVN r22755.
 2010-03-02 14:51:23 +00:00
Ralph Castain
69fe5ca69b Correctly compute bynode mapping, even in the presence of a $#$%#@^$ rankfile 
This commit was SVN r22748.
 2010-03-02 05:21:42 +00:00
Ralph Castain
bef06d52bc Silence compiler warning 
This commit was SVN r22747.
 2010-03-01 21:04:26 +00:00
Ralph Castain
5514d9c673 Fix the stupid rankfile mapper again, hopefully not breaking everything else to accommodate it. Looks like the round-robin mappers still work, at least... 
This commit was SVN r22746.
 2010-03-01 20:40:47 +00:00
Ralph Castain
96590b9fad Filter multicast messages to avoid cross-job confusion 
This commit was SVN r22729.
 2010-02-28 18:22:56 +00:00
Ralph Castain
359dc5cad3 Complete the app_idx change by cleaning up warnings in mappers 
This commit was SVN r22728.
 2010-02-27 18:14:27 +00:00
Ralph Castain
2541aa98ab Change the app_idx type to uint32_t to support users who use large numbers of app_contexts. Set it up as a new typedef so we can change it later without as much effort. 
This commit was SVN r22727.
 2010-02-27 17:37:34 +00:00
Ralph Castain
6c0d7940c7 Add a new MCA param (and corresponding mpirun cmd line option) to output the debugger proctable info after launch. The output is just the job map with the process pid included, so you get a node-by-node list of the process ranks on that node and thier pids. 
Works for initial launch and comm_spawn. xml and non-xml output is available

This commit was SVN r22725.
 2010-02-27 08:32:25 +00:00
Shiqing Fan
4a3f42d159 Correctly initialize the CCP command line buffer. 
This commit was SVN r22721.
 2010-02-26 15:53:00 +00:00
Ralph Castain
c6448587fe It is okay to not select an rmcast module 
This commit was SVN r22719.
 2010-02-26 02:39:04 +00:00
Ralph Castain
b89a21f0fa Grrr....cleanup the new module 
This commit was SVN r22711.
 2010-02-25 06:08:04 +00:00
Ralph Castain
8954700845 No, we don't have a .windows file... 
This commit was SVN r22710.
 2010-02-25 02:18:54 +00:00
Ralph Castain
18c7aaff08 Update the grpcomm framework to be more thread-friendly. 
Modify the orte configure options to specify --enable-multicast such that it directs components to build or not instead of littering the code base with #if's. Remove those #if's where they used to occur.

Add a new grpcomm "mcast" module to support multicast operations. Still some work required to properly perform daemon collectives for comm_spawn operations. New module only builds when --enable-multicast is provided, and when specifically selected.

This commit was SVN r22709.
 2010-02-25 01:11:29 +00:00
Shiqing Fan
7a5a5ce024 Add a global option for inputing the head node name for Windows CCP trough command line. 
This commit was SVN r22688.
 2010-02-23 19:42:51 +00:00
Jeff Squyres
f65eebf53d More changes for NetBSD. Thanks to Aleksej Saushev for this patch. 
This commit was SVN r22680.
 2010-02-22 15:05:09 +00:00
Ralph Castain
65a8ab4267 Cleanup the kill_procs command. Send a SIGTERM initially to allow C/R operations, and to be polite. Correctly update proc state if there is a problem so we don't hang. 
The change to just using SIGKILL was originally done due to problems whereby waitpid thought a proc had died, but it hadn't. We'll continue debugging that problem separately, but SIGTERM is required for C/R to work properly.

This commit was SVN r22674.
 2010-02-21 19:35:32 +00:00
Ralph Castain
2be03b4fb6 Cleanup a few bugs in the rmcast subsystem 
This commit was SVN r22650.
 2010-02-18 01:54:45 +00:00
Ralph Castain
9a5fdbb622 Continue development of reliable multicast 
This commit was SVN r22616.
 2010-02-14 19:20:56 +00:00
Josh Hursey
a3583b8f57 Fix --bynode option to remember for subsequent jobs where it left off last time. 
Add a ''map_bynode'' info key to determine if the job to be started by comm_spawn* should be mapped by node or by slot. Default is to map according to the default policy set when the parent job was started.

cmr:v1.5.1

This commit was SVN r22564.
 2010-02-05 15:37:49 +00:00
Iain Bason
28f03a2d86 Suspend/resume enhancements: 
Have orte call setpgrp after forking (but before exec) when
orte_forward_job_control is set. Then have it send signals to the
child's process group.  This allows suspending jobs that fork.

If a SIGTSTP arrives before the processes have been launched, then
record it and suspend them right after launching.

This commit was SVN r22557.
 2010-02-04 15:47:20 +00:00
Shiqing Fan
bbcf1f71c4 Remove a incorrect callback, which was based on the old source base without WMI. This makes no harm on 32 bit Windows, but it seems causing exceptions on 64 bit Windows sometimes. What this callback does is just waiting on the given pid which actually is a remote pid, so it won't work as expected. 
cmr:v1.4.2
cmr:v1.5

This commit was SVN r22549.
 2010-02-04 10:47:28 +00:00
Ralph Castain
16b7bc7a82 Sigh...get the order right to match unpack 
This commit was SVN r22539.
 2010-02-03 15:50:43 +00:00
Ralph Castain
e88627a7ca Ensure we don't go through rml open/select more than once. 
Open the rml to get the uri when bootstrapping daemons

This commit was SVN r22538.
 2010-02-03 15:38:32 +00:00
Ralph Castain
cb1007b5a9 Pass back the number of daemons in the system 
This commit was SVN r22537.
 2010-02-03 14:31:16 +00:00
Shiqing Fan
bdc13dacb1 A type cast. 
This commit was SVN r22520.
 2010-01-31 20:22:22 +00:00
Ralph Castain
7badff9d2d Okay to return no available nodes for mapping when launching daemons - just means there is nothing to do 
This commit was SVN r22509.
 2010-01-28 22:58:28 +00:00
Ralph Castain
86dd1d41af Handle zero-length iovecs in multicast messages 
This commit was SVN r22507.
 2010-01-28 15:29:43 +00:00
Ralph Castain
f66b6cae23 Enable the boot of an orted "virtual machine". Modify the mapper framework to allow mapping of only daemons. Remove the cm ras module as no longer required. Modify the orted code to always send back node arch info. Remove the "--enable-bootstrap" configure option as this feature will now always be available. 
This commit was SVN r22480.
 2010-01-25 22:25:13 +00:00
Josh Hursey
b749ecbab8 This commit fixes trac:2190. 
Originally the patch was to improve the error message, but when digging into the code I found a subtle bug. If the daemon does not tell the HNP what CRS component it used, then the HNP tries to figure it out from the metadata (this is an uncommon case). The path the HNP used was not complete, so it was unable to find the metadata information. This patch fixes this by adding the 'snapshot_reference' to the 'snapshot_location' which completes the path for this search.

cmr:v1.4 (needs a custom patch)

cmr:v1.5

This commit was SVN r22479.

The following Trac tickets were found above:
  Ticket 2190 --> https://svn.open-mpi.org/trac/ompi/ticket/2190
 2010-01-25 20:28:38 +00:00
Ralph Castain
e4bf33dcab Just a slight efficiency improvement - why check a flag twice? 
This commit was SVN r22472.
 2010-01-23 03:57:56 +00:00
Ralph Castain
3fe5e3e142 Propagate the user's callback data during non-blocking sends 
This commit was SVN r22432.
 2010-01-15 20:02:47 +00:00
Shiqing Fan
ad763c327d Restore several linked libraries that were deleted by mistake in r22405. 
This commit was SVN r22415.

The following SVN revision numbers were found above:
  r22405 --> open-mpi/ompi@872a4047ba
 2010-01-14 21:50:42 +00:00
Shiqing Fan
872a4047ba Fix the bug that caused by ADD_DEPENDENCIES() from different version of CMake. 
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.

This commit was SVN r22405.
 2010-01-14 18:10:20 +00:00
Ralph Castain
cec840f6b9 The ability to add procs to a running job was unfortunately borked when we added the detection of a proc exiting before calling init. Re-enable it here, ensuring that procs that are being restarted and/or added to a job do -not- call barrier during orte_init. 
This commit was SVN r22404.
 2010-01-14 17:59:42 +00:00
Shiqing Fan
0259fa0b9c Correct a few variable names. 
This commit was SVN r22401.
 2010-01-14 10:55:15 +00:00
Ralph Castain
adb2430e24 Missed one place, of course 
This commit was SVN r22400.
 2010-01-13 23:11:44 +00:00
Ralph Castain
c782c98433 Rename the "basic" rmcast component "udp" to more accurately reflect its operation 
This commit was SVN r22399.
 2010-01-13 23:01:25 +00:00
Ralph Castain
237eb4e8df For some strange reason, every so often it appears possible for the event library to trip the read event on a socket, yet have the read itself yield an error. If/when that happens, report the error and continue on. 
This happens rarely, but it does seem to happen.

This commit was SVN r22398.
 2010-01-13 19:23:28 +00:00
Ralph Castain
ae1719306b Fix a bug in non-blocking sends 
This commit was SVN r22395.
 2010-01-13 05:37:36 +00:00
Ralph Castain
b35486d945 The CM ess module needs to open the sysinfo framework and select modules prior to when others need it. Thus, setup a flag to avoid multiple open/select within that framework. 
This commit was SVN r22393.
 2010-01-12 22:03:49 +00:00
Ralph Castain
48486df4fe Cleanup some diagnostics 
This commit was SVN r22389.
 2010-01-12 01:25:19 +00:00
Ralph Castain
9f3ccebeaa We need to barrier for orte apps when the job is initially started, but we must not do the barrier when a proc is restarted as the other procs in the job won't know to participate. 
This commit was SVN r22388.
 2010-01-10 02:21:30 +00:00
Ralph Castain
16b16c5cb8 Fix a silly typo 
This commit was SVN r22387.
 2010-01-09 15:34:49 +00:00
Ralph Castain
add84178ef Fix a silly typo that prevented tcp multicast messages from being delivered 
This commit was SVN r22384.
 2010-01-08 20:30:27 +00:00
Brian Barrett
86d8356b13 Updates to allow OMPI to build on Cray XT platforms running Catamount 
This commit was SVN r22381.
 2010-01-07 18:14:03 +00:00
Ralph Castain
09763ec711 Since we modified ORTE to declare that any process that terminates after calling "init" while at least one other process has not yet called "init" is an error, we have to ensure that non-MPI ORTE apps (i.e., apps that call orte_init but not mpi_init) include a barrier in orte_init. Otherwise, fast ORTE apps almost always wind up triggering the "abnormal termination" condition. 
The barrier is protected with a test to ensure that MPI apps don't execute it and wind up doing two barriers during their init.

This commit was SVN r22378.
 2010-01-07 06:58:01 +00:00
Ralph Castain
ef1bfaa823 Add the ability to track how many times a process has been restarted, and to communicate that value to a process when it is restarted in case it needs to take action when it is restarted as opposed to being started for the first time. 
This commit was SVN r22377.
 2010-01-07 01:19:44 +00:00
Ralph Castain
a12de9d1e8 Oh, the pain one little word can make...sigh. 
This commit was SVN r22364.
 2010-01-05 23:29:56 +00:00
Ralph Castain
5faf857840 Add a new tag for pnp/multicast send of direct messages 
This commit was SVN r22352.
 2009-12-31 20:34:58 +00:00