1. It is not sufficient to put the result of m4_toupper() in a
variable and use that variable as the variable name in
AC_DEFINE_UNQUOTED. Instead, just use m4_toupper() directly in
AC_DEFINE_UNQUOTED. Also, save the result value in a "permanent"
variable that isn't erased, just in case autoconf decides to be lazy
about instantiating the body AC_DEFINE_UNQUOTED and move it later
(this is probably overkill :-) ).
1. Use the OMPI Way of always defining macros (to 0 or 1). Then also
slightly change the logic in util/basename.c to just check
OPAL_HAVE_DIRNAME (because it will always be defined).
Refs trac:4894
This commit was SVN r32723.
The following Trac tickets were found above:
Ticket 4894 --> https://svn.open-mpi.org/trac/ompi/ticket/4894
Add a debugging check that ensures that the registered storage is
aligned appropriately for the type that is specified.
When we know that the storage is properly aligned, we can cast the
mbv_storage to the appropriate type and then simply do the assignment.
We used to do this assignment via a union, but clang's
-fsanitizer=alignment complained about this.
This commit was SVN r32716.
The use of restrict in the return type qualifier for mca_btl_vader_reserve_fbox
is being ignored by gnu compiler. for newer gcc, one sees this warning only
with -Wignored-qualifiers set, but for older variants of gcc it was reported
that numerous warning messages about this ignored qualifier were being
generated as vader is being compiled.
The warning reported by gcc is
btl_vader_fbox.h:53:47: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
static inline mca_btl_vader_fbox_t * restrict mca_btl_vader_reserve_fbox (struct mca_btl_base_endpoint_t *ep, const size_t size)
This commit was SVN r32714.
The question of whether or not the openib BTL supports loopback is a separate question. It may be more appropriate to make the modex be PMIX_GLOBAL for cases where openib can support loopback so someone can run without a shared memory component. I'll leave that decision to the IB vendors.
This commit was SVN r32702.
So add a new function for wrapping MCA arguments, and tell the backend parser to ignore/remove leading/trailing quotes.
cmr=v1.8.3:reviewer=jsquyres
This commit was SVN r32686.
- do not have mca_btl_openib_component.default_recv_qps point to the stack
- do not reset mca_btl_openib_component.default_recv_qps in btl_openib_component_open
cmr=v1.8.3:reviewer=miked
This commit was SVN r32642.
opal_process_name_t is an uint64_t which is not equivalent to
an unsigned long on 32 bits systems.
this is now parsed as an unsigned long long.
This commit was SVN r32592.
Per #4874, code review revealed a possible race condition in the
module struct and the connectivity agent. Move the setup of the
connectivity agent listener until the module struct has been fully
setup.
This commit was SVN r32573.
When no components were able to be found, btl_base_select() was
showing the wrong help message -- one that indicated that a specific
component could not be found. And it left off a string argument, so
the end of the help message was garbage.
This commit creates a new help message for this case and updates the
show_help call to use the new message.
This commit was SVN r32572.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
Thanks to Ashley Pittman for pointing the modex should now be zero'ed
cmr=v1.8.2:ticket=trac:4871
This commit was SVN r32568.
The following Trac tickets were found above:
Ticket 4871 --> https://svn.open-mpi.org/trac/ompi/ticket/4871
Decrease the hash table size when an element is removed
cmr=v1.8.2:ticket=trac:4872
This commit was SVN r32566.
The following Trac tickets were found above:
Ticket 4872 --> https://svn.open-mpi.org/trac/ompi/ticket/4872
PGI compilers 2013 and older do not support the following syntax :
mca_btl_scif_modex_t modex = {.port_id = mca_btl_scif_module.port_id};
so split it on two lines
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r32555.
It turns out that we ''can'' get to the endpoint destructor with the
endpoint still on the "endpoints needing ACKs" list. So if it's on
the list, remove it first, and then DESTRUCT the opal_list_item_t.
This prevents an assert() fail in debug builds. We'd like to let this
soak over the weekend.
cmr=v1.8.2:reviewer=dgoodell
This commit was SVN r32546.
Rarely -- but it happens -- the connectivity client gets ECONNREFUSED
because the connectivity agent listen() backlog is too small. Rather
than put in a loop on the client side, take the simple way out for
now: increase the backlog size to an arbitrarily-large number.
Reviewed by Dave Goodell.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32543.
Instead of waiting to destroy the connectivity agent during component
shutdown, have the module shutdown send an "unlisten" command to the
cagent that will tell it to stop listening on a given interface.
This commit was SVN r32536.
1. After we receive N abnormally-short messages (meaning: corrupted),
print a show_help message about it. N defaults to 25. N can be set
to 0 disable the message via btl_usnic_max_short_packets.
1. If we receive a completion error for something other than a
receive, display a show_help message.
Reviewed by Dave Goodell.
CMR'ing to v1.8.3, but it will require a custom patch because of the
OMPI->OPAL BTL move.
cmr=v1.8.3
This commit was SVN r32522.
use HAVE_STRINGS_H to protect <strings.h> include
cmr=v1.8.2:reviewer=rhc:ticket=trac:4853
This commit was SVN r32510.
The following Trac tickets were found above:
Ticket 4853 --> https://svn.open-mpi.org/trac/ompi/ticket/4853
There were remaining references to size of MPI_COMM_WORLD,
etc. in ugni btl which prevented building of opal library
following btl move to opal.
Eventually another mechanism will need to be found for
providing hints to BTLs about how to setup internal
resources relevant to max. number possible endpoints, etc.
Conflicts:
opal/mca/btl/ugni/btl_ugni_component.c
This commit was SVN r32507.
Show an example of using the btl_usnic_connectivity_map option. Also,
mention that another reason for the "total connectivity failure" may
be due to asymmetric / unexpected routing.
Reviewed by Dave Goodell.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32465.
The contrib/check-help-strings.pl gets confused if the topic is an
inline logic check, so separate it into two calls to show_help.
This commit was SVN r32455.
The _strdup usage in opal/util/basename looks like it was a product of
Windows compatibility (see r11336), which we don't care about any
more. Further, opal/win32/win_compat.h, which we sitll maintain for
cygwin compatibility, #define's strdup to _strdup (which is what
Microsoft wants you to use).
So this old _strdup in opal/util/basename.c (and its corresponding
check in configure.ac) should just be removed.
This commit was SVN r32450.
The following SVN revision numbers were found above:
r11336 --> open-mpi/ompi@a28b025150
r32449 --> open-mpi/ompi@d5a3448b8b
_strdup is not part of any include file i could find on Solaris 10.
manually add the _strdup prototype if needed.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r32449.
In core library portions of the configury (e.g., top-level
configure.ac itself), we were calling AC_CHECK_LIB and
OPAL_CHECK_FUNC_LIB to check for various libraries.
'''SIDENOTE:''' It turns out that modern Autoconf has AC_SEARCH_LIBS,
which does just about exactly what OPAL_CHECK_FUNC_LIB does. So this
commit effectively replaces OPAL_CHECK_FUNC_LIB with AC_SEARCH_LIBS.
However, we never bothered to add these found libraries to the wrapper
compiler list of libraries used for static linking (doh!). We've been
getting lucky for quite a while that components were adding the same
libraries to their wrapper compiler LIBS list.
This is problematic, however, if we don't build some of these
components. For example, Paul Hargrove noticed that if he configured
with --disable-shared --enable-static --disable-io-romio, ROMIO was no
longer adding some libraries to the wrapper LIBS list -- libraries
that just happened to also be needed by core OPAL/ORTE/OMPI layers.
The solution is not to use AC_CHECK_LIB or OPAL_CHECK_FUNC_LIB, but
use a pair of new macros:
* OPAL_SEARCH_LIBS_CORE: a wrapper around AC_SEARCH_LIBS. If we add
something to $LIBS, then also add it to the wrapper list of static
libraries. This is the main piece of functionality that was
wrong/missing.
* OPAL_SEARCH_LIBS_COMPONENT: similar to OPAL_SEARCH_LIBS_CORE, but
instead of directly adding it to the wrapper list of static
libaries, add it to <framework>_<component>_LIBS (which eventually
gets slurped up into the wrapper list of static libraries. See the
lengthy comment in config/opal_setup_wrappers.m4 near the beginning
of OPAL_SETUP_WRAPPER_INIT() for a more detailed explanation).
Most components did this correctly already, but one or two weren't
right, so I implemented this second macro quite similar to the
first and put it everywhere we already used AC_SEARCH_LIBS or
OPAL_CHECK_FUNC_LIB.
This needs to soak for a day or two on the trunk before moving to the
v1.8 branch.
Refs trac:4834
cmr=v1.8.2:reviewer=ggouaillardet
This commit was SVN r32447.
The following Trac tickets were found above:
Ticket 4834 --> https://svn.open-mpi.org/trac/ompi/ticket/4834
These messages were committed in the v1.8 branch in r32341, but were
never committed to the trunk (because we were waiting for the OPAL BTL
move). This commit brings the trunk and v1.8 help messages in line
with each other.
This commit was SVN r32445.
The following SVN revision numbers were found above:
r32341 --> open-mpi/ompi@5e752b4aba
Ensure that the connectivity checker agent only uses pointers from the
client that is the same process as the agent.
Not necessary for the v1.8 branch -- this is a trunk/v1.9-only problem.
This commit was SVN r32438.
Make the del_procs, module finalize, and endpoint destructors be the
same between trunk and v1.8, with one exception: the very beginning of
v1.8 module_finalize calls del_procs for each proc to simulate/pretend
the trunk/v1.9 PML behavior of calling del_procs before module_finalize.
This commit was SVN r32437.
Fixes an assertion failure in --enable-debug builds and SEGVs in normal
builds.
I'm not 100% sure I like this model, but it at least seems to be
consistent. Some variation on this scheme will need to be adapted to
the trunk, where usnic_del_procs() is called by the PML instead of
internally in usnic_finalize().
A related bug (but with different mechanics) is #4832.
This commit was SVN r32424.
Per patch from aryzhikh, initialize a copule of fields in the openib ini struct
Hard to understand why this has sat there for so long...
cmr=v1.8.2:reviewer=rhc:subject=initialize a copule of fields in the openib ini struct
This commit was SVN r32417.
The following Trac tickets were found above:
Ticket 4377 --> https://svn.open-mpi.org/trac/ompi/ticket/4377
Previously, the connectivity agent was pretty dumb: it took whatever
pings it got and ACKed them. Then we added an agent check to ensured
that the ping actually came from the source interface that it said it
came from. Now we add another check such that when a ping is received
on interface X that corresponds to usnic module Y, we ensure that the
source interface of the ping is on the all_endpoints list for module Y
(i.e., module Y expects to be able to talk to that peer interface).
This detects cases where peers have come to different conclusions
about which interfaces should be used to communicate (which is bad!).
This usually reflects a network misconfiguration.
Fixes CSCuq05389.
This commit was SVN r32383.
Ensure that incoming "ping" messages came from the IP address that
they think they came from. If they don't, drop them (because it is
probably routing error), which will likely eventually cause the
connectivity checker to timeout, and therefore cause the job to abort.
This commit was SVN r32368.
Update compat.h to only handle compatability between v1.7/v1.8 and
v1.9/2.0 (i.e., the current trunk). Remove what seems to be the last
vestiages of OMPI/ORTE pollution in the now-OPAL-ized usnic BTL.
Currently use a hard-coded constant for the MCW size (i.e.,
MPI_COMM_WORLD size) for some initialization values in the v1.9/2.0
series; still need to figure out something better there.
This commit was SVN r32365.
Adapt to moving down to OPAL: find a PML-registered error callback,
and use that when we don't have a module context and we need to abort.
Failing that, just call exit().
This commit was SVN r32362.
communication library should use to initialize itself.
Ralph will champion this change back with an RFC if there is a realistic
need/use case from the community.
This commit was SVN r32361.
The following SVN revision numbers were found above:
r32355 --> open-mpi/ompi@c903917f47
If --with-usnic is specified and we can't build the usnic BTL, abort.
If --without-usnic is specified, gracefully skip building the usnic
BTL. If neither is specified, do the OMPI-default behavior: try to
configure/build the usnic BTL, and if we can't, skip it.
Fixes CSCuq13889.
This commit was SVN r32349.
The only user of this code was coll/sm. I implemented a basic replacement
for the removed code. This gets the trunk compiling again with
--disable-dlopen.
This commit was SVN r32333.
common/ofacm is only used by the iboffload code in ompi. This code does
not currently work so it is safe to ignore these components until it is
fixed.
This commit was SVN r32331.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
turned out to be a nightmare, as the pointers to the classes are
located in shared libraries memory areas, and are not accesible
after the shared library is unloaded. Thus, OPAL cannot cleanup
the left-over classes from the other shared libraries.
This commit was SVN r32248.
The following SVN revision numbers were found above:
r32236 --> open-mpi/ompi@59017433e1
new automake requires subdirs-object directive, to resolve this:
09:43:37 automake: warning: possible forward-incompatibility.
09:43:37 automake: At least a source file is in a subdirectory, but the 'subdir-objects'
09:43:37 automake: automake option hasn't been enabled. For now, the corresponding output
09:43:37 automake: object file(s) will be placed in the top-level directory. However,
09:43:37 automake: this behaviour will change in future Automake versions: they will
09:43:37 automake: unconditionally cause object files to be placed in the same subdirectory
09:43:37 automake: of the corresponding sources.
09:43:37 automake: You are advised to start using 'subdir-objects' option throughout your
09:43:37 automake: project, to avoid future incompatibilities.
09:43:37 tools/otfmerge/Makefile.common:13: warning: source file '$(OTFMERGESRCDIR)/otfmerge.c' is in a subdirectory,
09:43:37 tools/otfmerge/Makefile.common:13: but option 'subdir-objects' is disabled
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32225.
new flag to ompi_info that allows a user to print all MCA variables of a specific type.
--type version_string
This command will print all MCA variables of type version_string.
This feature was developed by Elena Shipunova and was reviewed by Josh Ladd.
This commit was SVN r32166.
mpirun ... -x env_foo1=val1 -x env_foo2 -x env_foo3=val3 should now be expressed as
mpirun ... -mca mca_base_env_list env_foo1=val1+env_foo2+env_foo3=val3.
The motivation for doing this is so that a list of environment variables may be set via standard MCA mechanisms such as mca parameter files, amca lists, etc.
This feature was developed by Elena Shipunova and was reviewed by Josh Ladd.
This commit was SVN r32163.
After discussion with Nathan, change the ERR_VALUE_OUT_OF_BOUNDS to be
ERR_NOT_FOUND, for two reasons:
1. It's consistent with other uses of ERR_NOT_FOUND in the code.
1. In this case, we could have just looked up a variable that is
basically a "hole" -- e.g., var indexes 0, 1, 2 are valid, and 4,
5, and 5 are valid, but 3 is invalid (e.g., 3 was de-registered --
remember that MPI_T explicitly does not allow re-using indexes).
So returning ERR_OUT_OF_BOUNDS seems weird -- returning
ERR_NOT_FOUND seems a bit more natural.
cmr=v1.8.2:ticket=trac:4587
This commit was SVN r32158.
The following Trac tickets were found above:
Ticket 4587 --> https://svn.open-mpi.org/trac/ompi/ticket/4587
The alps ras and plm components were broken by recent changes in ORTE. This
commit resolves those issues.
Changes:
- Define PMI2_SUCCESS if it isn't defined. This fixes a problem with Cray's
PMI implementation which does not define (for some reason) PMI2_SUCCESS. We
had previously just used PMI_SUCCESS.
- Add missing definition and a typo in pml_alps_module.
- launch_id is no longer available in the orte_node_t structure. Use the
attribute lookup to get the value.
- Do not use an O(n^2) sorting algorithm when putting alps nodes in order. Use
opal_list_sort instead (O(nlogn)).
This commit was SVN r32076.
(a) default binding policy is in effect. In this case, we will emit a
warning and default to not binding unless the user provided the
"oversubscribe" or "overload" modifier to the "bind-to" option.
(b) user-specified binding policy is in effect. In this case, we will
error out unless the user provided the "oversubscribe" or "overload"
modifier to the "bind-to" option as we cannot meet the directive.
Either "bind-to" modifier (oversubscribe or overload) will be accepted for
now - in 1.9, we will deprecate the "overload" term in favor of
"oversubscribe".
Also added the ability to accept a --bind-to modifier without specifying the binding policy itself so a user can specify overload-allowed with the default policy.
Closes trac:4345
cmr=v1.8.2:reviewer=rhc:subject=resolve handling of overload conditions
This commit was SVN r32005.
The following Trac tickets were found above:
Ticket 4345 --> https://svn.open-mpi.org/trac/ompi/ticket/4345
* allow users to specify just a modifier for map-by instead of requiring that they also specify a policy. Thus, we now accept --map-by :pe=3 as indicating that we should use the default mapping policy, but bind 3 cpus/proc.
* if users specify a pe's/proc but no policy, default to --map-by NUMA to ensure we have access to multiple cpus for the request. This won't guarantee we have access to enough to meet the request, but gives us a chance. In addition, we know that binding a proc to multiple cpus will work best if those cpus are all in the same NUMA, so this provides some degree of optimized behavior.
Per a request from Jeff, define "oversubscribe" for binding as a synonym for the "overload" modifier.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31967.
http://www.open-mpi.org/community/lists/devel/2014/05/14822.php
Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root).
This commit was SVN r31916.
during the unpack and during the positioning.
Fixes trac:4610.
This commit was SVN r31904.
The following Trac tickets were found above:
Ticket 4610 --> https://svn.open-mpi.org/trac/ompi/ticket/4610
Two leaks are fixed by this commit:
- opal_dss.lookup_data_type returns an allocated string. Free it.
- opal_ifaddrtokindex was leaking a struct addrinfo. Ensure that is
released before returning.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31777.
Either we need to ensure that all events are deleted (which may prove difficult), or find another way to release the base memory.
This commit was SVN r31775.
The following SVN revision numbers were found above:
r31765 --> open-mpi/ompi@75fb6dbba9
Need to remove the items of the list to avoid an assert in debug builds.
cmr=v1.8.2:ticket=trac:4628
This commit was SVN r31769.
The following SVN revision numbers were found above:
r31764 --> open-mpi/ompi@13fd6ae774
The following Trac tickets were found above:
Ticket 4628 --> https://svn.open-mpi.org/trac/ompi/ticket/4628
This fixes a series of leaks identified by valgrind. Since
opal_event_base_open was creating the event base it follows that
opal_event_base_close should release the event base.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31765.
list
This commit updates the behavior of opal_free_list_t to match the
behavior of ompi_free_list_t. opal_free_list_t constructed items
placed on the free list but never destructed them.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31764.
Bring down 3aa0ed6 from the hwloc v1.7 branch: Stevens says we should
GETFD before we SETFD, so we do
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31683.
top_ompi_srcdir -> OMPI_TOP_SRCDIR
top_ompi_builddir -> OMPI_TOP_BUILDDIR
We also split the srcdir/builddir flags according to their local tree (e.g., OPAL_TOP_SRCDIR), and tied them all together in configure.ac. Renamed ompi_ignore and ompi_unignore to be opal_<foo> as these are agnostic markers.
Only thing left is ompilibdir being treated similar to what we dif for srcdir/builddir. Coming soon.
This commit was SVN r31678.
- This line, and those below, will be ignored--
M opal/mca/event/libevent2021/configure.m4
M opal/mca/hwloc/hwloc172/configure.m4
M configure.ac
M config/opal_setup_libltdl.m4
M config/opal_check_visibility.m4
M config/opal_setup_cc.m4
This commit was SVN r31637.
have any impact on the type signature.
Fixes trac:4597.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31635.
The following Trac tickets were found above:
Ticket 4597 --> https://svn.open-mpi.org/trac/ompi/ticket/4597
Several fixes:
- I was allowing an MPI_T_cvar_handle to be created for an invalid
variable. Fixed this by checking if the variable is valid in
mca_base_var_get.
- Use a better error code when the caller tries to create an unbound
pvar handle for a bound variable.
- Return the verbosity level in MPI_T_cvar_get_info.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31576.
http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
code.
This commit fixes minor errors in the incorrectly-committed r31513
(new fd close-on-exec convenience function).
Refs trac:4550
This commit was SVN r31514.
The following SVN revision numbers were found above:
r31513 --> open-mpi/ompi@e1655ae68d
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
Paul Hargrove pointed out that Stevens tells us that we should
FD_GETFL before FD_SETFL. And so we shall.
Make a new convenience function to do this (opal_fd_set_cloexec()),
just so that we don't have to litter this 2-step process throughout
the code.
Refs trac:4550
This commit was SVN r31513.
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
Make sure that an internal, long-lived hwloc fd is marked as
close-on-exec so that children don't inherit it. This patch is
committed upstream in the hwloc master and v1.9 branches as 7489287
and b654e19, respectively. The patch applied here is the exact same
logic, but the surrounding code changed slightly since the hwloc v1.7
series, so the patch doesn't apply cleanly.
Refs trac:4550
This commit was SVN r31511.
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
completed. As we need to have the right displacement at the beginning
of the next call, we should save the position relative to the beginning
of the buffer and not to the last loop.
This commit was SVN r31387.
Aside from comments, these help files are empty -- so just remove
them. Also remove a few inclusions of show_help.h, since it isn't
used in those source files.
This commit was SVN r31328.
The contents of this file were superceded by mca-help-var.txt.
Indeed, this file was already removed from Makefile.am; it looks like
it was accidentally left in SVN.
This commit was SVN r31327.
Also:
* fix formatting error at top (make the emacs format line begin
with a comment character)
* Remove blank lines between topics and replace them with empty
comment lines (so that the help messages are not displayed with a
trailing blank line)
This commit was SVN r31324.
