There was a duplicated subnet check in the sender hash lookup routine.
This caused receivers to always fail the sender hash lookup if the
sender was in a different subnet, so the receiver would discard the
packet as though it were coming from a different job.
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30841.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
If ibv_create_ah fails, we will not initialize the `endpoint->proc`.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30840.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This functionality is required for routable UDP/IP usnic traffic.
Previously we would only setup endpoints for remote interfaces on the
same subnet as the current module's local interface. This behavior
still holds if two processes share any common subnets. However, if the
two processes only have no subnets in common then we assume that all
interfaces are reachable from all other interfaces and wire them up in a
1-1, randomly-matched order somewhat similarly to the "tcp" BTL's
behavior.
Only match in different subnets if we detect UDP support in the lower
layer.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30839.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This commit decouples OMPI deployment from the version(s) of the lower
layers of the stack by probing for UDP support.
Verbs applications assume a 40-byte header (there is no current
mechanism for querying payload offset). So to support a 42-byte UDP
header without causing existing applications like ibv_ud_pingpong or
older versions of OMPI to crash, we must inform libusnic_verbs that we
are aware of the nonstandard payload offset. We do this by overriding
the `transport_type` field of the device to be 42 before calling
`ibv_open_device`. If the library resets it to something else, then we
know the lower layers are UDP capable. Otherwise we use the older
custom-L2 format.
This necessitated some minor ugliness in common_verbs, but it's as tidy
as Jeff and I know how to make it right now.
This commit only adds support for UDP headers and connectivity over the
same L2 network, it does not touch routing or interface pairing.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30838.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Just trying to be deliberate about keeping fastpath-accessed fields
grouped together to fit into the same 64-byte cache line.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30837.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30836.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30835.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30834.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30833.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Valgrind showed this one, just a bit of sloppiness with the reference
counting.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30832.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
The logic did not correctly perform the OR behavior that is described
in the doxy docs for this function. This commit fixes the logic so
that a port will be included if it has supports any of the
capabilities indicated by the passed-in flags.
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30831.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
oshmem collective can select MPI collectives modules as provider.
Developed by Elena, reviewed by Miked
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30808.
1. Changed rng_buff_t --> opal_rng_buff_t
2. All global variables obey the prefix rule
3. Old code has been removed
4. Found a couple of unnecessary includes
Refs trac:4298
This commit was SVN r30807.
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
We're going to be bringing a bunch of usnic code to the SVN trunk
soon, and I basically brought this commit over out of order. So I'm
reverting it for now; the same functionality will come back shortly.
This commit was SVN r30805.
The following SVN revision numbers were found above:
r30804 --> open-mpi/ompi@5bedcc15bf
These constants are now upstream (see
https://git.kernel.org/cgit/libs/infiniband/libibverbs.git/commit/?id=f57a9c67eabb9e7f19c624ac3c8c27b7be55796c),
so let's support them properly in Open MPI.
Added bonus: consolidating these checks up in
ompi_check_openfabrics.m4 allowed removing some custom checks and
AC_DEFINE's from the usnic configure.m4 script.
Also change the usnic/configure.m4 check for IBV_EVENT_GID_CHANGE to
use AC_CHECK_DECLS (vs. AC_CHECK_DECL).
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r30804.
* Use the prefix rule for global variables
* Elimiante seed_prng() since it isn't necessary any more
These files will need to get edited again then the RNG type obeys the
prefix rule.
Refs trac:4298
This commit was SVN r30803.
The following SVN revision numbers were found above:
r30801 --> open-mpi/ompi@e39d9f4080
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
- fix mxm/tl selection logic
- do not require memory registration if mxm/ud was selected
fixed by Alex, reviewed by Miked
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30802.
r of slots remaing to be assigned being only one/node. Regardless, it didn't work for the case where nodes were defined in ascending order of slots.
Tetsuya's proposed patch didn't solve the problem for me, but it did correct the case where cpus/proc > 1. The final patch requires that we loop over the assignment
algo until all procs are assigned or all nodes are filled - any remaining procs are then handled in the cleanup loop.
cmr=v1.7.5:reviewer=rhc:subject=fix map-by node for different cases
This commit was SVN r30798.
Running orte-restart requires an initialized sstore.
This opens the sstore component for FT builds just like
the snapc component.
This commit was SVN r30796.
better error message when there is only one socket available
fixed by Elena, reviewed by Miked
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30787.
fix: do not fail on blm allocation error, wait for some puts to complete and retry
fixed by Roman, reviewed by Mike/Alex
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30779.
- Move the ptrdiff_t tests up higher in configure.ac to be with the
rest of the type tests.
- Create new OMPI_FIND_MPI_AINT_COUNT_OFFSET for finding the
corresponding types of MPI_Aint, MPI_Count, and MPI_Offset.
Consolidate all the old C and Fortran tests into this new macro (and
.m4 file).
- Fix Fortran MPI_*_KIND tests that incorrectly keyed off assumed
types (e.g., int64_t) rather than whatever the corresponding C
MPI_Aint, MPI_Count, MPI_Offset types turned out to be.
- Add new logic to ensure that sizeof(MPI_Count) <= sizeof(size_t),
because our entire PML, BTL, and convertor infrastructure requires
this. As a side effect, just like MPI_Offset the same type of
MPI_Count (because MPI_Count has to be able to hold an MPI_Offset,
so we can't let MPI_Offset be larger than a MPI_Count).
This commit was SVN r30776.
The following Trac tickets were found above:
Ticket 4205 --> https://svn.open-mpi.org/trac/ompi/ticket/4205
This adds the code to actually checkpoint a process using CRIU
with the necessary variables to control the behaviour.
Right now only --np 1 is supported and --mca oob tcp.
Following parameters are supported:
* crs_criu_log: name of the log file
* crs_criu_log_level: verbosity level in the log file
* crs_criu_tcp_established: C/R established TCP connections
* crs_criu_shell_job: C/R shell jobs
* crs_criu_ext_unix_sk: allow external unix connections
* crs_criu_leave_running: leave tasks in running state after checkpoint
This commit was SVN r30772.
- MXM uses libtool versioning scheme which is enough, no need additional in OMPI
reviewed by yossi
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30768.