Please verify your components have been updated correctly. Keep in
mind that in terms of threading:
OPAL_FREE_LIST_GET -> opal_free_list_get_st
OPAL_FREE_LIST_RETURN -> opal_free_list_return_st
I used the opal_using_threads() variant anytime it appeared multiple
threads could be operating on the free list. If this is not the case
update to _st. If multiple threads are always in use change to _mt.
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
So we need all the routing code for dealing with cross-job communications, lifelines, etc. The HNP will be directly connected to all daemons as they must callback at startup, and so we need to track those children correctly so we know when it is okay to terminate.
We still have to support direct launch, though, as this is the only component we can use in that scenario. So if the app doesn't have daemon URI info, then it must fall back to directly connecting to everything.
We recognize that this means other users of OPAL will need to "wrap" the opal_process_name_t if they desire to abstract it in some fashion. This is regrettable, and we are looking at possible alternatives that might mitigate that requirement. Meantime, however, we have to put the needs of the OMPI community first, and are taking this step to restore hetero and SPARC support.
Mimick the btl/tcp protocol to solve the race condition that happens
when two peers try to connect to each other at the same time
cmr=v1.8.4:reviewer=rhc
This commit was SVN r32799.
"NULL" doesn't meany anything to the user, and is somewhat confusing
to see in an error message. "<unknown>" at least indicates that
there's an error, and we know who the peer is.
This commit was SVN r32747.
Replace our old, clunky timing setup with a much nicer one that is only available if configured with --enable-timing. Add a tool for profiling clock differences between the nodes so you can get more precise timing measurements. I'll ask Artem to update the Github wiki with full instructions on how to use this setup.
This commit was SVN r32738.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
providing a netmask of 0 to opal_net_samenetwork results in everything
looking like it is on the same network. Hence, we were not retaining any
of the alternative addresses, so we had no other way to check them.
Refs trac:4870
This commit was SVN r32556.
The following Trac tickets were found above:
Ticket 4870 --> https://svn.open-mpi.org/trac/ompi/ticket/4870
This should eliminate the connectivity issues that have been reported, and will make maintenance of this component much easier.
cmr=v1.8.2:reviewer=jsquyres:subject=simplify the OOB/TCP component
This commit was SVN r31956.
grpcomm: fix memory leaks
We were leaking the caddy object used to pass data to the callback
function. This commit fixes these leaks.
oob,rml: fix memory leaks
This commit fixes several leaks:
- Both the oob/base and oob/tcp were leaking objects on their peer
hash tables. Iterate on the hash tables and free any objects.
- Leaked sent messages because of missing OBJ_RELEASE. I placed the
release in ORTE_RML_SEND_COMPLETE to catch all the possible
paths.
ess/base: close the state framework
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31776.
top_ompi_srcdir -> OMPI_TOP_SRCDIR
top_ompi_builddir -> OMPI_TOP_BUILDDIR
We also split the srcdir/builddir flags according to their local tree (e.g., OPAL_TOP_SRCDIR), and tied them all together in configure.ac. Renamed ompi_ignore and ompi_unignore to be opal_<foo> as these are agnostic markers.
Only thing left is ompilibdir being treated similar to what we dif for srcdir/builddir. Coming soon.
This commit was SVN r31678.
The HNP can't know the precise reason, of course - all it knows is that the daemon failed. So output a generic error message that provides guidance on probable causes.
Refs trac:4571
This commit was SVN r31589.
The following Trac tickets were found above:
Ticket 4571 --> https://svn.open-mpi.org/trac/ompi/ticket/4571
http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
Child processes now look clean; I can't find any more fd's that are
leaking from the parent to children.
Refs trac:4550
This commit was SVN r31515.
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
Paul Hargrove pointed out that Stevens tells us that we should
FD_GETFL before FD_SETFL. And so we shall.
Make a new convenience function to do this (opal_fd_set_cloexec()),
just so that we don't have to litter this 2-step process throughout
the code.
Refs trac:4550
This commit was SVN r31513.
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
This pipe is used to communicate between threads in this process.
Mark both fd as close-on-exec so that children don't inherit this
pipe.
Refs trac:4550
This commit was SVN r31512.
The following Trac tickets were found above:
Ticket 4550 --> https://svn.open-mpi.org/trac/ompi/ticket/4550
Without this patch running ring_c with the usnic BTL under valgrind will
cause the orteds to segfault.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Ralph Castain <rhc@open-mpi.org>
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r31161.
With enabled fault tolerance code different functions
are selected during compilation. Most of the ft
code is #ifdef'd out. This #ifdef's more code out
so that compiler warnings like
warning: unused variable 'item' [-Wunused-variable]
opal_list_item_t *item;
are removed.
This commit was SVN r30747.
VERY tentatively schedule this for 1.7.5 - only to be applied if we see no troubles AND the branch is ready in advance.
cmr=v1.7.5:reviewer=rhc:subject=Add unix socket component to OOB
This commit was SVN r30742.
Wire the security check into ORTE's OOB handshake, and add a "version" check to ensure that both ends are from the same ORTE version. If not, report the mismatch and refuse the connection
Fixes trac:4171
cmr=v1.7.5:reviewer=jsquyres:subject=Add a security framework for authenticating connections
This commit was SVN r30551.
The following Trac tickets were found above:
Ticket 4171 --> https://svn.open-mpi.org/trac/ompi/ticket/4171
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
No review will be required as this is just debug code for those helping us debug the 1.7.4 release candidates
cmr-=v1.7.4:reviewer=ompi-gk1.7
This commit was SVN r30043.
Thanks to Dave Love and Ashley Pittman for pointing out the problem.
cmr=v1.7.4:reviewer=jsquyres:subject=Fix tool communications with mpirun
This commit was SVN r29959.
The following Trac tickets were found above:
Ticket 3963 --> https://svn.open-mpi.org/trac/ompi/ticket/3963
Noticed these as part of #3694: external libevent's don't cause argv.h
to automatically get included.
Refs trac:3694
This commit was SVN r29897.
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
Create a new required key in the OMPI layer for retrieving a "node id" from the database. ALL RTE'S MUST DEFINE THIS KEY. This allows us to compute locality in the MPI layer, which is necessary when we do things like intercomm_create.
cmr:v1.7.4:reviewer=rhc:subject=Cleanup handling of modex data
This commit was SVN r29274.
The intercomm "merge" function can create a linkage between procs that was not reflected anywhere in a modex, and so at least some of the procs in the resulting communicator don't know how to talk to some of the new communicator's peers.
For example, consider the case where:
1. parent job A comm_spawns a process (job B) - these processes exchange modex and can communicate
2. parent job A now comm_spawns another process (job C) - again, these can communicate, but the proc in C knows nothing of B
3. do an intercomm merge across the communicators created by the two comm_spawns. This puts B and C into the same communicator, but they know nothing about how to talk to each other as they were not involved in any exchange of contact info. Hence, collectives on that communicator now fail.
This fix adds an API to the ompi/dpm framework that (a) exchanges the modex info across the procs in the merge to ensure all procs know how to communicate, and (b) calls add_procs to give the btl's a chance to select transports to any new procs.
cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29166.
The following Trac tickets were found above:
Ticket 2904 --> https://svn.open-mpi.org/trac/ompi/ticket/2904
onflict that can cause messages to be lost. Add detection of this condition, and have both processes cancel their connect operations. The process with the higher rank will
reconnect, while the lower rank process will simply wait for the connection to be created.
Refs trac:3696
This commit was SVN r29139.
The following Trac tickets were found above:
Ticket 3696 --> https://svn.open-mpi.org/trac/ompi/ticket/3696
oob_tcp_connection.c: In function 'mca_oob_tcp_peer_accept':
oob_tcp_connection.c:725:9: warning: variable 'cmpval' set but not used [-Wunused-but-set-variable]
Refs trac:3696
This commit was SVN r29091.
The following Trac tickets were found above:
Ticket 3696 --> https://svn.open-mpi.org/trac/ompi/ticket/3696
* paccept - establish a persistent listening port for async connect requests
* pconnect - async connect to remote process that has posted a paccept port. Provides a timeout mechanism, and allows the underlying implementation to retry until timeout
* pclose - shuts down a prior paccept posting
Includes example programs paccept.c and pconnect.c in orte/test/mpi. New MPI extension interfaces coming...
This commit was SVN r29063.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
Reasoning: The old behavior was a little confusing. mca_base_components_open does not open an output stream so it is a little unexpected that mca_base_components_close does. To add to this several frameworks (that don't use mca_base_components_close) failed to close their output in the framework close function and others closed their output a second time. This change is an improvement to the symantics of mca_base_components_open/close as they are now symetric in their functionality.
This commit was SVN r27570.
Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework.
Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one.
This commit was SVN r26678.
* Add new configure command line options and deprecate some old ones:
* --with-verbs replaces --with-openib
* --with-verbs-libdir replaces --with-openib-libdir
* If you specify --with-openib[-libdir] without
--with-verbs[-libdir], you'll get a "these options have been
deprecated!" warning, but then they'll act just like
--with-verbs[--libdir].
'''Sidenote:''' Note that we are not renaming any components at this
time, nor are we renaming the top-level OMPI_CHECK_OPENIB m4 macro
(which is pretty strongly tied to the openib BTL and is bastaridzed
by the ofud BTL). Note that there will likely be more changes in
this area coming soon (next week?) when some long-standing changes
move to the SVN trunk: some openib BTL infrastructure will move to
ompi/mca/common, and its configury gets split up / refactored.
We extend our philosophy of other --with-<foo> configure options of
--with-verbs to ''all'' verbs-lovin components:
* If you specify --with-verbs, then all verbs-lovin' components must
configure successfully (or abort). This currently means: OOB ud,
BTL ofud, BTL openib.
* If you specify --with-verbs=DIR, then all verbs-lovin' component
must configure successfully (or abort), and will use DIR to find
verbs headers and libraries.
* If you specify --without-verbs, then all verbs-lovin' components
will be ignored.
This commit also fixes a problem where the --with-openib=DIR form
would not use DIR for ''all'' verbs-lovin' components (I think only
BTL openib and BTL ofud used that DIR). Now all of them do, as does
hwloc (because hwloc has some !OpenFabrics helper functions that
require ibv types from verbs.h).
There's a little new m4 infrastructure worth mentioning:
* If you create a new verbs-lovin' component (i.e., a component that
need verbs), your configure.m4 should
AC_REQUIRE([OPAL_CHECK_VERBS_DIR]).
* You can then use three global shell variables: $opal_want_verbs,
$opal_verbs_dir, $opal_verbs_libdir, which will be set as follows:
* opal_want_verbs will be "yes" and opal_verbs_dir and
opal_verbs_libdir will both be set to directory values, '''OR'''
* opal_want_verbs will be "no" and opal_verbs_dir and
opal_verbs_libdir will both be set empty
This commit was SVN r26640.
Restore enable-static-ports option by default - the Cray will have to disable it to get around their library issues, but that's just a warning problem as opposed to blocking the build.
This commit was SVN r26606.
it succeeds and run $1 or $2, accordingly. This allows "make dist" to
run properly on machines that do not have OpenFabrics stuff installed
(e.g., the nightly tarball build machine).
There's still more to be done here -- it doesn't check for non-uniform
directories where the OpenFabrics headers/libraries might be
installed. We might need to re-tool/combine
ompi/config/ompi_check_openib.m4 (which checks for way more than
oob/ud needs) and move it up to config/ompi_check_ofa.m4, or
something...?
This commit was SVN r26350.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
Brian dealt with this in the past by creating platform files and using "no-build" to block the components. This was clunky, but acceptable when only one organization was using that option. However, that number has now expanded to at least two more locations.
Accordingly, make --without-rte-support actually work by adding appropriate configury to prevent components from building when they shouldn't. While doing so, remove two frameworks (db and rmcast) that are no longer used as ORCM comes to a close (besides, they belonged in ORCM now anyway). Do some minor cleanups along the way.
This commit was SVN r25497.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
specify btl_tcp_if_include because btl_tcp_if_exclude is defaulted to
the loopback devices.
This commit does a few things:
* Introduce a new OPAL MCA base function:
mca_base_param_check_exclusive_string(). It checks to see that the
''user'' does not set two MCA parameters that are mutually
exclusive by checking the source of those MCS param values.
* Use the above function in many BTLs (and the OOB TCP) to ensure
that <foo>_if_include and <foo>_if_exclude are not both specified
''by the user''.
* Re-arrange many of these BTLs to move their MCA registration code
into a separate component_register() function (vs. the
component_open() function).
This code has been nominally reviewed and checked by Ralph, George,
Terry, and Shiqing.
This commit was SVN r25043.
The following SVN revision numbers were found above:
r24976 --> open-mpi/ompi@8f4ac54336
Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again.
Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines.
This commit was SVN r24860.
Fix a bug in the new code that prevented the system from correctly matching addresses.
Remove comments in the show-help text indicating that we would continue in the face of incorrect specifications - leave that to the calling layer to decide.
Modify the new opal_ifmatches so it returns error codes letting the caller better understand the result.
Modify the oob to ensure we abort if we don't find interfaces matching specified constraints, and that we do so without multiple error messages.
NOTE: we have a conflict in our standards. We have been using comma-delimited lists of interfaces for all our params. However, one param - opal_net_private_ipv4 - now uses semicolons instead of comma separators. No idea why, but it is confusing.
This commit was SVN r24755.
I want to thank Hugo Meyer for reporting this/these bugs.
Notes:
* Moved over a patch from the stabilization branch that makes sure we close the peer socket in the OOB TCP component fully during shutdown (after the de-registration sync). It also ensures that we free the rml_uri only after we are done communicating with the peer (in the odls_base deregister sync operation).
* When an error is detected while delivering messages, we really want to bail out of the loop since the error manager is likely mutating the orte_local_children data structure, so it is no longer safe to iterate over in the orte_odls_base_default_deliver_message() function.
* When the HNP is hosting processes make sure it accounts for processes that may have failed locally in the ErrMgr HNP component by decrementing the num_local_procs. This makes it match the orted ErrMgr component accounting. This is what was causing the modex to fail (the number of participants was wrong on a rolling recovery.
* The crmig and autor features of the hnp ErrMgr component now check for the jobid from both the 'job' parameter and from the process name (since one may be there and not the other). This caused some additional error messages during startup.
* If we fail to migrate (e.g., due to invalid node specification), print only the error message, not the error and success messages. This can be misleading.
This commit was SVN r24317.
* Improve the FTB notifier to publish (C/R, process/communication failure) events to the FTB with the
OMPI jobid as the associated payload.
* Add notifier calls for C/R events and process status events in SnapC and ErrMgr components.
* Fix a bug where the SnapC states and process states collide before being thrown out over the notifier.
This commit was SVN r24251.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
This required modification of the errmgr.update_state API so the pid could be passed in to the function that could update the proper data record(s). All calls to that API have been updated as well, but I obviously couldn't test them all.
Thanks to Dong Ahn (LLNL) for catching this problem!
Also fixed debugger daemon cospawn, both for initial launch and attach-while-running modes. Tested and verified on rsh and slurm.
This commit was SVN r23300.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
he errmgr framework so that it can decide how to respond - which for now at least is just to check for lifeline and abort if so.
Add a new error constant to indicate that the error is "unrecoverable" so the oob can know it needs to abort.
This commit was SVN r23112.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
