Without this, an `--enable-debug` build would hit an assertion in the
list code when run under valgrind with `--malloc-fill=0xff` or any other
case where malloc returned non-zeroed buffers.
Also allow the normal OBJ_ machinery to handle the constructor
invocation ordering for us instead of doing it by hand (which could have
led to future bugs).
Reviewed-by: jsquyres@cisco.com
cmr=v1.7.4
Depends on trunk functionality in r29095 and r29096. Refs trac:3740,#3741.
This commit was SVN r29127.
The following SVN revision numbers were found above:
r29095 --> open-mpi/ompi@d1b5940e97
r29096 --> open-mpi/ompi@a552921171
The following Trac tickets were found above:
Ticket 3740 --> https://svn.open-mpi.org/trac/ompi/ticket/3740
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
The usnic BTL now builds cleanly under `--enable-picky` when `MSGDEBUG1`
is set.
Reviewed-by: jsquyres
cmr=v1.7.4:reviewer=jsquyres
This commit was SVN r29097.
The free list code called the constructor for each object it
slab allocated in ompi_free_list_grow. This permits free list-managed
elements to safely allocate/deallocate resources in their
constructors/destructors without leaking.
It's probably best to let this soak on the trunk a little while before
moving it over to v1.7.
Reviewed-by: bosilca
cmr=v1.7.4:reviewer=bosilca
This commit was SVN r29096.
Calling OMPI_REQUEST_INIT puts the request into an _INACTIVE state
instead of an _INVALID state, which we don't want if it's been
simply been constructed, e.g., in a free_list. Without this change a
future change to call destructors at free list destruction time will
result in request dtor state assertion failures.
Reviewed-by: bosilca
cmr=v1.7.4:reviewer=bosilca
This commit was SVN r29095.
osc_pt2pt_data_move.c: In function 'ompi_osc_pt2pt_sendreq_recv_accum_long_cb':
osc_pt2pt_data_move.c:643:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
osc_rdma_data_move.c: In function 'ompi_osc_rdma_control_send_cb':
osc_rdma_data_move.c:1312:37: warning: variable 'header' set but not used [-Wunused-but-set-variable]
This commit was SVN r29092.
oob_tcp_connection.c: In function 'mca_oob_tcp_peer_accept':
oob_tcp_connection.c:725:9: warning: variable 'cmpval' set but not used [-Wunused-but-set-variable]
Refs trac:3696
This commit was SVN r29091.
The following Trac tickets were found above:
Ticket 3696 --> https://svn.open-mpi.org/trac/ompi/ticket/3696
the output of ompi_info.
A variable is disabled if its component will never be selected due to
a component selection parameter (eg. -mca btl self). The old behavior
of ompi_info was to not print these parameters at all. Now we print the
parameters. After some discussion with George it was decided that there
needed to be some way to see what parameters will not be used. This was
the comprimise.
This commit also fixes a bug and a typo in the pvar sytem. The enum_count
value in mca_base_pvar_dump was being used without being set. The full_name
in mca_base_pvar_t was not being used.
cmr=v1.7.3:ticket=trac:3734
This commit was SVN r29078.
The following Trac tickets were found above:
Ticket 3734 --> https://svn.open-mpi.org/trac/ompi/ticket/3734
endpoint_rfstart was being initialized from a value which was not yet
set. Also ensure that rfstart is a valid index in the range
0..WINDOW_SIZE-1, since it is used as the index into endpoint_rcvd_segs,
which has WINDOW_SIZE elements.
Without this change there is significant risk of memory corruption or
segfaults, resulting in hangs or crashes, if malloc ever returns us a
value >=WINDOW_SIZE (4096). Right now we seem to be getting lucky that
the malloc is returning zero-pages to us when we are allocating endpoint
structures (possibly because the freelist performs a single large
allocation for all endpoints).
Fixes Cisco bug CSCui88781.
Reviewed-by: rfaucett@cisco.com
Reviewed-by: jsquyres@cisco.com
cmr=v1.7.3:reviewer=jsquyres
This commit was SVN r29075.
memory hooks.
The MIC has a /dev/scif device and the host has /dev/mic/scif. I do not
know if this device exists when no MIC is connected.
cmr=v1.7.4:ticket=trac:3733:reviewer=jsquyres
This commit was SVN r29071.
The following Trac tickets were found above:
Ticket 3733 --> https://svn.open-mpi.org/trac/ompi/ticket/3733
and improve the behavior of ompi_info.
This commit changes the default behavior of ompi_info --all when a
level is not specified. Instead of assuming level 1 in this case we
now assume level 9. This change is due to feedback from the community
after the introduction of the --level option.
I also added a new option: --selected-only. This option will limit the
displayed variables to components that can be selected (ie. if there
is a selection parameter set-- btl self,sm)
cmr=v1.7.3:reviewer=jsquyres
This commit was SVN r29070.
is enabled and fix a bug in the handling of watermark performance
variables.
cmr=v1.7.3:ticket=trac:3725:reviewer=jsquyres
This commit was SVN r29068.
The following Trac tickets were found above:
Ticket 3725 --> https://svn.open-mpi.org/trac/ompi/ticket/3725
option to autodetect whether fragmentation should be enabled
cmr=v1.7.3:ticket=trac:3717
This commit was SVN r29065.
The following Trac tickets were found above:
Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
* paccept - establish a persistent listening port for async connect requests
* pconnect - async connect to remote process that has posted a paccept port. Provides a timeout mechanism, and allows the underlying implementation to retry until timeout
* pclose - shuts down a prior paccept posting
Includes example programs paccept.c and pconnect.c in orte/test/mpi. New MPI extension interfaces coming...
This commit was SVN r29063.
Turns out that AC_CHECK_DECLS is one of the "new style" Autoconf
macros that #defines the output to be 0 or 1 (vs. #define'ing or
#undef'ing it). So don't check for "#if defined(..."; just check for
"#if ...".
This commit was SVN r29059.
The following Trac tickets were found above:
Ticket 3730 --> https://svn.open-mpi.org/trac/ompi/ticket/3730
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
So shift the cutoff param to the MPI layer, and have it solely determine whether or not we call modex_recv on the hostname. If comm_world is of size greater than the cutoff, then we don't automatically retrieve the hostname when we build the ompi_proc_t for a process - instead, we fill the hostname entry on first call to modex_recv for that process.
The param is now "ompi_hostname_cutoff=N", where N=number of procs for cutoff.
Refs trac:3729
This commit was SVN r29056.
The following Trac tickets were found above:
Ticket 3729 --> https://svn.open-mpi.org/trac/ompi/ticket/3729
Commit r27211 added ifdef checks for #define
HAVE_IBV_LINK_LAYER_ETHERNET, which is incorrect. The correct #define
is HAVE_DECL_IBV_LINK_LAYER_ETHERNET. This broke OMPI over iWARP.
This fixes trac:3726 and should be added to cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29053.
The following SVN revision numbers were found above:
r27211 --> open-mpi/ompi@b27862e5c7
The following Trac tickets were found above:
Ticket 3726 --> https://svn.open-mpi.org/trac/ompi/ticket/3726
* add a new MCA param orte_hostname_cutoff to specify the number of nodes at which we stop including hostnames. This defaults to INT_MAX => always include hostnames. If a value is given, then we will include hostnames for any allocation smaller than the given limit.
* remove ompi_proc_get_hostname. Replace all occurrences with a direct link to ompi_proc_t's proc_hostname, protected by appropriate "if NULL"
* modify the OMPI-ORTE integration component so that any call to modex_recv automatically loads the ompi_proc_t->proc_hostname field as well as returning the requested info. Thus, any process whose modex info you retrieve will automatically receive the hostname. Note that on-demand retrieval is still enabled - i.e., if we are running under direct launch with PMI, the hostname will be fetched upon first call to modex_recv, and then the ompi_proc_t->proc_hostname field will be loaded
* removed a stale MCA param "mpi_keep_peer_hostnames" that was no longer used anywhere in the code base
* added an envar lookup in ess/pmi for the number of nodes in the allocation. Sadly, PMI itself doesn't provide that info, so we have to get it a different way. Currently, we support PBS-based systems and SLURM - for any other, rank0 will emit a warning and we assume max number of daemons so we will always retain hostnames
This commit was SVN r29052.
