Cannot start the data clearing at the root object level as the root object has a different struct attached to userdata.
This commit was SVN r27357.
The following Trac tickets were found above:
Ticket 3322 --> https://svn.open-mpi.org/trac/ompi/ticket/3322
This now results in the procs being bound within their assigned location. It also causes us to use only the 0th HT on a core unless --use-hwthread-cpus has been specified (in which case, we use all the HTs in a core). Bind to core binds you to all HTs regardless - the --use-hwthread-cpus only impacts the oversubscribed determination and when binding to HT.
cmr:v1.7
This commit was SVN r27342.
We ran into a case where the OMPI SVN trunk grew a new acceptable MCA
parameter value, but this new value was not accepted on the v1.6
branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts
the value "silent", but on the older v1.6 branch, it doesn't). If you
set "hwloc_base_mem_bind_failure_action=silent" in the default MCA
params file and then accidentally ran with the v1.6 branch, every OMPI
executable (including ompi_info) just failed because hwloc_base_open()
would say "hey, 'silent' is not a valid value for
hwloc_base_mem_bind_failure_action!". Kaboom.
The only problem is that it didn't give you any indication of where
this value was being set. Quite maddening, from a user perspective.
So we changed the ompi_info handles this case. If any framework open
function return OMPI_ERR_BAD_PARAM (either because its base MCA params
got a bad value or because one of its component register/open
functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out
a warning that it received and error, and then dump out the parameters
that it has received so far in the framework that had a problem.
At a minimum, this will show the user the MCA param that had an error
(it's usually the last one), and ''where it was set from'' (so that
they can go fix it).
We updated ompi_info to check for O???_ERR_BAD_PARAM from each from
the framework opens. Also updated the doxygen docs in mca.h for this
O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS
and MCA_ERR_??? codes. Why? I think we used them in exactly one
place in the code base (mca_base_components_open.c). So we deleted
those and just used the normal OPAL_* codes instead.
While we were doing this, we also cleaned up a little memory
management during ompi_info/orte-info/opal-info finalization.
Valgrind still reports a truckload of memory still in use at ompi_info
termination, but they mostly look to be components not freeing
memory/resources properly (and outside the scope of this fix).
This commit was SVN r27306.
The following Trac tickets were found above:
Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
* NULL's out the hwloc_obj_t->userdata in
hwloc_base_util.c:free_object() and
hwloc_base_util.c:opal_hwloc_base_free_topology() after it has been
OBJ_RELEASE'd.
* Adds a userdata field to opal_hwloc_topo_data_t. This field will
be used in an upcoming rmaps component ("lama") to cache some
associated data during hardware tree traversals.
This commit was SVN r26938.
Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework.
Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one.
This commit was SVN r26678.
* Add new configure command line options and deprecate some old ones:
* --with-verbs replaces --with-openib
* --with-verbs-libdir replaces --with-openib-libdir
* If you specify --with-openib[-libdir] without
--with-verbs[-libdir], you'll get a "these options have been
deprecated!" warning, but then they'll act just like
--with-verbs[--libdir].
'''Sidenote:''' Note that we are not renaming any components at this
time, nor are we renaming the top-level OMPI_CHECK_OPENIB m4 macro
(which is pretty strongly tied to the openib BTL and is bastaridzed
by the ofud BTL). Note that there will likely be more changes in
this area coming soon (next week?) when some long-standing changes
move to the SVN trunk: some openib BTL infrastructure will move to
ompi/mca/common, and its configury gets split up / refactored.
We extend our philosophy of other --with-<foo> configure options of
--with-verbs to ''all'' verbs-lovin components:
* If you specify --with-verbs, then all verbs-lovin' components must
configure successfully (or abort). This currently means: OOB ud,
BTL ofud, BTL openib.
* If you specify --with-verbs=DIR, then all verbs-lovin' component
must configure successfully (or abort), and will use DIR to find
verbs headers and libraries.
* If you specify --without-verbs, then all verbs-lovin' components
will be ignored.
This commit also fixes a problem where the --with-openib=DIR form
would not use DIR for ''all'' verbs-lovin' components (I think only
BTL openib and BTL ofud used that DIR). Now all of them do, as does
hwloc (because hwloc has some !OpenFabrics helper functions that
require ibv types from verbs.h).
There's a little new m4 infrastructure worth mentioning:
* If you create a new verbs-lovin' component (i.e., a component that
need verbs), your configure.m4 should
AC_REQUIRE([OPAL_CHECK_VERBS_DIR]).
* You can then use three global shell variables: $opal_want_verbs,
$opal_verbs_dir, $opal_verbs_libdir, which will be set as follows:
* opal_want_verbs will be "yes" and opal_verbs_dir and
opal_verbs_libdir will both be set to directory values, '''OR'''
* opal_want_verbs will be "no" and opal_verbs_dir and
opal_verbs_libdir will both be set empty
This commit was SVN r26640.
* opal_hwloc_base_cset2str(): Make a human-readable string of a
hwloc_cpuset_t (e.g., socket 2[core 3[hwt 1]])
* opal_hwloc_base_cset2mapstr(): Make a map-like string of a
hwloc_cpuset_t (e.g., [B./..])
This commit was SVN r26532.
will be the final solution. But I'm committing it now so that
Oracle's Solaris Studio builds can resume.
The issue is that the C++ bindings are now (eventually) including
<hwloc.h>. We use !__hwloc_inline__ and #define it to an appropriate
value at compile-time. The issue is that when we're compiling C++
code, we should just set !__hwloc_inline__ to "inline", because that's
a keyword in the C++ language (as opposed to !__inline__, or
somesuch).
This commit was SVN r26418.
helper file, even if we find that the system has <infiniband/verbs.h>.
The reason is because there are some inline functions in that verbs
helper file that invoke ibv_* functions. Some linkers (e.g., Solaris
Studio Compilers) will instantiate those static inline functions --
even if we don't use them -- and therefore we need to be able to
resolve the ibv_* symbols at link time.
But since -libverbs is only specified in places where we use other
ibv_* functions (e.g., the OpenFabrics-based BTLs), that means that
linking random executables can/will fail (e.g., orterun).
So instead, introduce a new #define: OPAL_HWLOC_WANT_VERBS_HELPER. If
this macro is set to 1 before including opal/mca/hwloc/hwloc.h, then
you'll also get the hwloc OpenFabrics verbs helper header file (*if*
hwloc found <infiniband/verbs.h> -- otherwise, it'll #error).
This commit was SVN r26417.
* Remove paffinity, maffinity, and carto frameworks -- they've been
wholly replaced by hwloc.
* Move ompi_mpi_init() affinity-setting/checking code down to ORTE.
* Update sm, smcuda, wv, and openib components to no longer use carto.
Instead, use hwloc data. There are still optimizations possible in
the sm/smcuda BTLs (i.e., making multiple mpools). Also, the old
carto-based code found out how many NUMA nodes were ''available''
-- not how many were used ''in this job''. The new hwloc-using
code computes the same value -- it was not updated to calculate how
many NUMA nodes are used ''by this job.''
* Note that I cannot compile the smcuda and wv BTLs -- I ''think''
they're right, but they need to be verified by their owners.
* The openib component now does a bunch of stuff to figure out where
"near" OpenFabrics devices are. '''THIS IS A CHANGE IN DEFAULT
BEHAVIOR!!''' and still needs to be verified by OpenFabrics vendors
(I do not have a NUMA machine with an OpenFabrics device that is a
non-uniform distance from multiple different NUMA nodes).
* Completely rewrite the OMPI_Affinity_str() routine from the
"affinity" mpiext extension. This extension now understands
hyperthreads; the output format of it has changed a bit to reflect
this new information.
* Bunches of minor changes around the code base to update names/types
from maffinity/paffinity-based names to hwloc-based names.
* Add some helper functions into the hwloc base, mainly having to do
with the fact that we have the hwloc data reporting ''all''
topology information, but sometimes you really only want the
(online | available) data.
This commit was SVN r26391.
(http://www.open-mpi.org/community/lists/devel/2012/04/10905.php), set
opal_cache_line_size via hwloc data, if we have it.
opal_cache_line_size will be set to an hwloc-inspired value by the end
of orte_init(), but will always have a safe value to use (i.e., a
default value 128) -- even before opal_init() has completed.
Default to the same value of 128 that Open MPI has used for several
years if a) we have no hwloc data, or b) we weren't able to find L2
objects in the hwloc data.
This commit was SVN r26322.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
Worked with Oracle to verify that hwloc PCI detection is correctly
disabled on the Suse 10/64 bit platform and is enabled by default on
all other platforms. The --[en|dis]able-hwloc-pci switch is also
available for manual override of the configure decision about hwloc
PCI support.
This commit was SVN r26175.
This commit was SVN r26165.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4402
hwloc component weren't reverse applied to the external hwloc
component. Additionaly, if we add stuff to LDFLAGS/LIBS, we also may
need to append (DY)LD_LIBRARY_PATH (here in this configure process
only), otherwise future configure tests may fail because they can't
find libhwloc.so (e.g., if you --with-hwloc=/some/path, we need to add
/some/path/lib to (DY)LD_LIBRARY_PATH).
This commit was SVN r26082.
The following Trac tickets were found above:
Ticket 3043 --> https://svn.open-mpi.org/trac/ompi/ticket/3043
This commit was SVN r26037.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4340
This commit was SVN r25987.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4319
This commit was SVN r25986.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4314
1. no binding support - indicated by a negative return code from get_cpubind
2. binding supported, but not bound - the bitset returned by get_cpubind is the same as the available cpuset
3. binding supported and bound - bitset from get_cpubind is a subset of available cpuset
4. only one cpu is available - in this case, get_cpubind matches the available cpuset, but we are effectively bound
This commit was SVN r25957.
in the tarball. Thanks to Paul Hargrove for the fix.
This commit was SVN r25952.
The following Trac tickets were found above:
Ticket 2951 --> https://svn.open-mpi.org/trac/ompi/ticket/2951
problem on SuSE 10 (which might be related to Oracle's dual-bitness
builds, but we aren't completely sure yet).
So just turn it off for now, and bring this over to v1.5. Find a
proper fix (that enables pci support properly) for trunk/v1.7 later.
This commit was SVN r25769.
The following Trac tickets were found above:
Ticket 2952 --> https://svn.open-mpi.org/trac/ompi/ticket/2952
This commit was SVN r25759.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4094
This commit was SVN r25707.
The following SVN revision numbers were found above:
r4102 --> open-mpi/ompi@8961ca568d
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4104
.ompi_ignored to allow other developers to test with it. It is
expected that we'll remove the .ompi_ignore here soon, and
simultaneously remove the hwloc 1.2.2ompi component.
There was one very minor patch added to stock hwloc 1.3.1 in
hwloc/config/hwloc.m4:
{{{
--- hwloc-1.3.1/config/hwloc.m4 2011-12-14
+++ ompi3/opal/mca/hwloc/hwloc131/hwloc/config/hwloc.m4
@@ -583,6 +583,7 @@
])
fi
AC_SUBST(HWLOC_PCI_LIBS)
+ HWLOC_LIBS="$HWLOC_LIBS $HWLOC_PCI_LIBS"
# If we asked for pci support but couldn't deliver, fail
AS_IF([test "$enable_pci" = "yes" -a "$hwloc_pci_happy" = "no"],
[AC_MSG_WARN([Specified --enable-pci switch, but could
not])
}}}
This will be pushed upstream to hwloc.
This commit was SVN r25706.
supposed to. I.e., half-baked/not complete stuff.
This commit backs out all of r25545. Sorry folks!
This commit was SVN r25546.
The following SVN revision numbers were found above:
r25545 --> open-mpi/ompi@7f9ae11faf
to make MPI_IN_PLACE (and other sentinel Fortran constants) work on OS
X, we need to use the following compiler (linker) flag:
-Wl,-commons,use_dylibs
So if we're compiling on OS X, test to see if that flag works with the
compiler. If so, add it to the wrapper FFLAGS and FCFLAGS (note that
per a future update, we'll only have one Fortran compiler anyway).
Fixes trac:1982.
This commit was SVN r25545.
The following Trac tickets were found above:
Ticket 1982 --> https://svn.open-mpi.org/trac/ompi/ticket/1982
https://svn.open-mpi.org/trac/ompi/wiki/ProcessPlacement
The wiki page is incomplete at the moment, but I hope to complete it over the next few days. I will provide updates on the devel list. As the wiki page states, the default and most commonly used options remain unchanged (except as noted below). New, esoteric and complex options have been added, but unless you are a true masochist, you are unlikely to use many of them beyond perhaps an initial curiosity-motivated experimentation.
In a nutshell, this commit revamps the map/rank/bind procedure to take into account topology info on the compute nodes. I have, for the most part, preserved the default behaviors, with three notable exceptions:
1. I have at long last bowed my head in submission to the system admin's of managed clusters. For years, they have complained about our default of allowing users to oversubscribe nodes - i.e., to run more processes on a node than allocated slots. Accordingly, I have modified the default behavior: if you are running off of hostfile/dash-host allocated nodes, then the default is to allow oversubscription. If you are running off of RM-allocated nodes, then the default is to NOT allow oversubscription. Flags to override these behaviors are provided, so this only affects the default behavior.
2. both cpus/rank and stride have been removed. The latter was demanded by those who didn't understand the purpose behind it - and I agreed as the users who requested it are no longer using it. The former was removed temporarily pending implementation.
3. vm launch is now the sole method for starting OMPI. It was just too darned hard to maintain multiple launch procedures - maybe someday, provided someone can demonstrate a reason to do so.
As Jeff stated, it is impossible to fully test a change of this size. I have tested it on Linux and Mac, covering all the default and simple options, singletons, and comm_spawn. That said, I'm sure others will find problems, so I'll be watching MTT results until this stabilizes.
This commit was SVN r25476.
Use hwloc to obtain the cpuset for each process during mpi_init, and share that info in the modex. As it arrives, use a new opal_hwloc_base utility function to parse the value against the local proc's cpuset and determine where they overlap. Cache the value in the pmap object as it may be referenced multiple times.
Thus, the return value from orte_ess.proc_get_locality is a 16-bit bitmask that describes the resources being shared with you. This bitmask can be tested using the macros in opal/mca/paffinity/paffinity.h
Locality is available for all procs, whether launched via mpirun or directly with an external launcher such as slurm or aprun.
This commit was SVN r25331.
match similar stuff in the event framework; only add CPPFLAGS /
LDFLAGS / LIBS / and WRAPPER_EXTRA_* of the same for the one, single,
winning component (because this framework is compile-time,
one-of-many).
This commit was SVN r25199.
* change components from setting <framework>_base_include to
opal_<framework>_<component>_include; the framework m4 will figure
out the winning component and pick the right "include" shell
variable. Ditto for the other shell variables (cppflags, ldflags,
etc.).
* misc fixes to hwloc/external
* add a bunch of missing "opal_" prefixes to shell variables
* add a few more / update a few comments in framework m4's
This commit was SVN r25174.
maffinity_base_bind_failure_action MCA params to the hwloc base
(hwloc_base_alloc_polocy and hwloc_base_bind_failure_action). Since
these MCA parameters were never on a release branch, I'm just
moving/renaming them outright and not leaving aliases to the old
names.
Note that some upper layer needs to call
opal_hwloc_base_set_process_membind_policy() to set the
set-by-MCA-param process-wide memory affinity policy. We can't do
this automatically during hwloc_base_open() because, for reasons
described elsewhere, opal_hwloc_topology is not automatically filled
during hwloc_base_open() (in short: potential scalability issues when
launching many MPI processes simultaneously on a single machine, for
example).
This commit was SVN r25156.
the command line, hwloc is just like any other external dependency
in OMPI: if we find it, we'll use it. If we don't find it, we'll
ignore it. See comments in opal/mca/hwloc/configure.m4 for an
explanation.
* Fix some copy-n-paste errors in opal/mca/hwloc/configure.m4
w.r.t. flags coming in from the winning component.
* Add another line in ompi_info's output about whether hwloc support
is included or not.
This commit was SVN r25134.
