Some parameters were ommited and compilation failed if
configured with --disable-weak-symbols
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32064.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
1: find/create procs, and create associated endpoint for each
2: resolve peer addresses
The 2nd part is done as a separate loop so that the address lookups
can be parallelized.
The overall result is to split usnic_add_procs() into two smaller,
simpler parts.
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32062.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
When ibv_create_ah() fails due to an address resolution failure, it
really only means that we can't reach that one peer -- so we should
just ignore that one peer. If ibv_create_ah() fails for some other
reason, then give up on the entire usnic_X device.
Change the show_help() message that is displayed when ibv_create_ah()
fails due to address resolution failure; indicate that it's likely a
routing problem. Also opal_output_verbose() the same info, since
show_help() is de-duplicated (and this particular show_help() message
can be squelched).
Fixes Cisco bugs CSCup35851 and CSCup35872.
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32061.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
Use the appropriate modules, don't use mpif-config.h.
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32052.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
There is more comprehensive work regarding MPI_SIZEOF coming, but the
Fortran working group in the MPI Forum is debating this internally,
and I'm still doing more testing to get a final solution. So for the
moment, just remove real*16 and complex*32 support so that it compiles
porperly with older compilers (that do not support real*16 and
complex*32).
This commit was SVN r32048.
Move them all to fortran/use-mpi-f08, since that's the only directory
that uses them (the use-mpi-f08-desc directory has been disabled).
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32045.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
Thanks to Michael Rachner for pointing out the issue.
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32042.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
This is part one of several Fortran improvements and fixes. This
first part removes the now-defunct scripts that are used to generate
the .f90 files in the use-mpi-tkr implementation, and just commits the
output from those scripts. This makes long-term maintenance of the
use-mpi-tkr implementation simpler.
cmr=v1.8.2:reviewer=jsquyres:subject=Various Fortran fixes/improvements
This commit was SVN r32040.
Move away from verbs-specific terms "device" and "port" in the usnic
BTL help messages. Replace them with "usNIC interface" (since usNIC
has no concept of a port).
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32029.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
Move MACLEN and IPV4LEN into _util.h and rename them to be MACSTRLEN
and IPV4STRLEN, respectively.
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32028.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
The post and start window calls are supposed to be matching. The code
did not check to see that an incoming post matched with the start call.
This commit fixes the bug by placing the post on a pending list that
will be checked by the next call to start.
cmr=v1.8.2:reviewer=dgoodell
This commit was SVN r32017.
The replace callback did not increment the incoming frag counter. This
leads to a hang during synchronization. This commit adds the increment
and also puts the request on the garbage collection list to fix a leak.
This fixes a hang found when running the mpich test suite.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32016.
The wrong type was used when calculating the amount of space needed
for an accumulate fragment. Fixed the calculation and took the
opportunity to eliminate the get_acc header as it is identical to the
acc header.
This fixes trac:4719 and #4718
Tracking these fixes for 1.8.2 in this CMR.
Throwing this to Brad for review as he is the one who ran into the issue.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32015.
The following Trac tickets were found above:
Ticket 4719 --> https://svn.open-mpi.org/trac/ompi/ticket/4719
This changeset :
- always call the low/level implementation for :
* MPI_Alltoallv
* MPI_Neighbor_alltoallv
* MPI_Alltoallw
* MPI_Neighbor_alltoallv
- fix mca_coll_tuned_alltoallv_intra_basic_inplace
so zero size types are correctly handled
cmr=v1.8.2:reviewer=bosilca:ticket=4715
This commit was SVN r32013.
The following Trac tickets were found above:
Ticket 4715 --> https://svn.open-mpi.org/trac/ompi/ticket/4715
in self optimization
This addresses an issue found with the MPICH pscw_ordering test. Eager sends
were not yet active (which is ok for the standard path) but not ok for the
self optimization. Fixed by waiting for all post messages before checking
the sync state.
Fixes trac:4724
Tracking the 1.8.2 issue in this CMR.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32012.
The following Trac tickets were found above:
Ticket 4724 --> https://svn.open-mpi.org/trac/ompi/ticket/4724
It is valid to lock/unlock MPI_PROC_NULL. It probably isn't work tracking
whether MPI_PROC_NULL is locked for MPI_PROC_NULL RMA operations so this
is probably the permanent solution.
Closes trac:4720
Tracking the 1.8.2 issue with this CMR.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32011.
The following Trac tickets were found above:
Ticket 4720 --> https://svn.open-mpi.org/trac/ompi/ticket/4720
Brad correctly pointed out that the total window size should not be an
int. Changed it to an unsigned long.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32010.
Only one field is valid for RMA requests: MPI_ERROR. This field is set
to the correct value in ompi_request_empty so there is no reason to
allocate and keep track of osc/sm requests because they are always
complete on return. Since we are no longer using the osc/sm request
structure or free list they are now removed.
Closes trac:4723
Tracking this issue with the CMR. Brad, can you verify the issue is indeed fixed.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32009.
The following Trac tickets were found above:
Ticket 4723 --> https://svn.open-mpi.org/trac/ompi/ticket/4723
Correctly handle the corner case in MPI_Alltoallv when
some tasks have no data to transfer and some other tasks
do have data to transfer.
This test case is covered in ibm/collective/alltoallv_somezeros
from the ompi-tests repo.
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31985.
is really special as the weights can be one of the following three
values (NULL, EMPTY or some legal value). As such, we need a complex
if to correctly convert the Fortran value to the corresponding C
value. Thus, always defining the c_ array is the simplest and most
straighforward approach.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31955.
Issue noted by Walter Spector on the user's mailing list.
Throwing to Craig Rasmussen for review.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31933.
This would be a really, really weird case if it ever happens (i.e.,
you have usnics but the agent process failed somewhere in MPI_INIT
such that the agent never appears), but having an infinite loop
doesn't seem like a good idea.
(does not need to go to v1.8 because v1.8 still uses RML for
communication for the connectivity checker)
This commit was SVN r31932.
This conservative fixes tries to fetch info from both
opal_dstore_nonpeer and opal_dstore_peer.
This is required is task A spawns tasks B and C.
B was previously unable to find info from C, this caused locality
info not being set and a hang in coll/ml init.
no CMR is required since v1.8 uses a unique dstore
This commit was SVN r31923.
if eager rdma is used, endpoint reference_count is greater than one.
this commit is a temporary fix that OBJ_RELEASE the endpoint as much as needed.
thought this is likely correct, it can be suboptimal and hence needs to be reviewed
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r31922.
http://www.open-mpi.org/community/lists/devel/2014/05/14822.php
Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root).
This commit was SVN r31916.
We were still leaking 1) file descriptors for data files, and 2) some
control files. I fixed both of these leaks and everything is looking
good. This should fix the bug where we are running out of file
descriptors when running the loop_spawn test. I also too the
opportunity to refactor the code a bit to make the mapping/unmapping
simpler. This should help avoid these sorts of issues in the future.
Depends on #4678
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31893.
