to let the PML (or io, more generally the low level request manager)
to have it's own release function (what was before the req_fini). This
function will only be called from the low level while the req_free will
be called from the upper level (MPI layer) in order to mark the request
as not used by the user anymore.
From the request point of view the requests will be marked as inactive
everytime we read their status (true for persistent as well). As
MPI_REQUEST_NULL is already marked as inactive, the test and wait functions
are simpler. The drawback is that now we have to change in the
ompi_request_{test|wait} the req_status of the request once we get it's
status.
This commit was SVN r9290.
installation directories) in configure, the files that depend on this
information are not properly rebuilt. If you need this information,
don't setup a -D in the Makefile.am - instead, include
opal/install_dirs.h.
* Use the : option in AC_CONFIG_FILES to avoid needing to expose that
we are playing around with temporary files with our headers to avoid
rebuilding
* Clean up the version file information a bit, and like the install
directory stuff, make sure that there is a dependency so that
ompi_info gets rebuilt properly when a version number changes.
This commit was SVN r9256.
- initial support for gm progress thread
- corrected threading issue in pml
- added polling progress for a configurable number of cycles to wait for threaded case
This commit was SVN r9188.
Buffer first descriptor on the sendreq until postive ACK
Set bytes delivered only after postive ACK, removed num_acks, etc, in general
trying to remove as much state as possible so that rolling things back isn't
such a nightmare
This commit was SVN r9187.
around, since OB1 currently doesn't do the right thing there, but that should
not happen in the near future because the R2 BML should not make any RDMA
networks available between machines with different architectures
* Clean up the #ifs a little bit so that we don't do unneeded work when
on big endian machines and heterogeneous support is disabled...
This commit was SVN r9184.
- moved hton64 and ntoh64 from the bunch of places it had been copied
into one header file
- properly set and use the btl_tcp's nbo option to put things in
network byte order on the wire if both sides don't have the same
endianness
- Put the OB1 PML's headers (with a couple exceptions I need to discuss
with Tim) in network byte order on the wire if both sides don't have
the same endianness
- since it was needed for the TCP BTL, move the orte_process_name_t
HTON and NTOH macros from the TCP OOB to ns_types.h
This commit was SVN r9145.
working on creating a uniform retransmission mechanism otherwise each type of
send ends up needing a special case for retransmission.
Removed NACK for individual transmissions, we just aggregate these and send
them at the end of a vfrag
This commit was SVN r9141.
Note, the checksums are not enabled currently, setting to zero as the
convertor is not ready for checksums yet.
Also, we can't call unpack/pack on convertor with 0 bytes, otherwise it
crashes.
This commit was SVN r9062.
counterparts, the reset to MPI_REQUEST_NULL of the upper
struct ompi_request_t was broken. Nightly mpi_test_suite
failed, e.g.
mpirun -np 2 ./mpi_test_suite -t "Ring Isend"
This commit was SVN r9028.
The following SVN revision numbers were found above:
r8945 --> open-mpi/ompi@83f83e5730
progress function in the mca_pml to the BML progress one, avoid having a cascade of
call to the progress function and speed up a little bit the execution.
This commit was SVN r9007.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
Correct the problem introduced by the commit 8933 (thanks Tim). In order to avoid to much
trafic on the bus we do not compute the bytes_delivered (require an atomic size_t add)
we have to set it in the begining or otherwise we will report the wrong count in the
MPI status.
This commit was SVN r8968.
1. remove all useless macros from the proc header file
2. merge 2 of the match macros (they share the same logic except one list)
This commit was SVN r8946.
of request we are playing with (send or receive). Therefore, it's useless to have another
switch inside this macro and make the code bigger. Now, we have 2 versions
MCA_PML_OB1_SEND_REQUEST_FREE and MCA_PML_OB1_RECV_REQUEST_FREE.
This commit was SVN r8945.
and add a new macro that can be used for both sends and receives.
Move to atomic operations to manage the length of the sended or received
status. There is one instance where the atomic operation is not required
as the code can cannot be executed in same time by 2 differents threads.
This commit was SVN r8933.
second instance of the ompi_proc from the send and receive request. This
information is already available on the base request, so there is no
need for duplication. The drawback is that now (in order to avoid a
second lookup in the communicator array of procs) we have to set the base
proc in the PML's _ALLOC macro.
This commit was SVN r8900.
if-clause, getting rid of local schedule variable.
This commit was SVN r8778.
The following SVN revision numbers were found above:
r8771 --> open-mpi/ompi@2fadddebc8
Get the diff down as close as possible, so only whitespace and a few
rearrangements of code (in mca_pml_teg_add_procs, uniq is nicer to
read), so awked diff of both is minimal.
This commit was SVN r8489.
- remove windows socket initialization (it's already in the TCP component)
- protect all used header files
- remove the unused ones.
This commit was SVN r8434.
- when processing out of order list - reset match to null on each iteration
- check matched request type and if probe - complete probe and queue fragment
on unexpected list
This commit was SVN r8339.
* turns out (duh!) that there was a reason that the <projectdir>dir
variable was set in the AM conditional. If not, stupid directories
are created and not needed... duh.
This commit was SVN r8205.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
the base send and receive request from the pml_base, we can solve our problem
if we construct the convertor attached to any request in the pml_base_construct
function. At the end of the life time for each request (here life time is
related to one utilisation, without taking in account the cache) we release
all information attached to the convertors in the _FINI macro by calling the
ompi_convertor_cleanup.
This commit was SVN r7910.
convertor (when prepared) increase the reference count on the used datatype. This reference count
will be released only when the OBJ_DESTRUCT is called on a convertor. However, having to call
OBJ_CONSTRUCT and OBJ_DESTRUCT on each request every time we want to use it (even when it come
from the cache) is an expensive operation. This can be avoided is the OBJ_DESTRUCT will leave the
convertor in exactly the same state as OBJ_CONSTRUCT. With this approach we just have to call
OBJ_CONSTRUCT for each convertor once when we initially create the request.
This commit was SVN r7813.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
- corrected memory hook callback to catch all allocations (need to optimize this)
- don't attempt to consolidate allocations
This commit was SVN r7600.
any NICs to use
* Make mvapi, gm, and mx components all publish information, even if there
are no NICs available so that modex_recv doesn't hang. If there are no
NICs available, don't set the reachable bit, but don't do anything
to fail. This unfortunately doesn't cover the hangs that will result if
different procs load different sets of components, but it's a start
This commit was SVN r7550.
searching the tree. Modified the memory callback to search the tree at each
page boundary for registrations. This is necessary as an application may
malloc memory and send out of any portion of that memory, even discontiguous
regions.
This commit was SVN r7510.
add misc asserts to check for proper reference counting.
ugly hack 1 -- use mallopt to never release memory ala sbrk - this is
commented out in mca_btl_mvapi_component_init
ugly hack 2 -- test registrations comming out of the tree via rcache_find, for
an unknown reason the tree is returning registrations where the address is not
within the base or bound of the registration. If this happens, we return
NULL.
comment out code to enable mem hooks if leave_pinned is set, note we can do
this via an mca param and will default it to leave_pinned with mem_hooks when
we iron out these issues.
I am adding a unit test for the rcache. Note that we have a unit test for the
rb tree but the compare function is significantly different than that used for
registrations. After we have tracked down the issues with rcache_rb we will
remove the above hacks.
This commit was SVN r7499.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
1. Added OMPI_PROC_ARCH as a defined registry key and added the code so that the architecture info gets properly transmitted across all processes using the startup message.
2. Added an OMPI_MODEX_KEY definition and removed the hard-coded "modex" key from pml_modex_exchange
This commit was SVN r7129.
add a -I to find the included ltdl.h (vs. a system-installed ltdl.h)
- Clean up kruft in a bunch of Makefile.am's to remove now-unnecessary
AM_CPPFLAGS settings to get static-components.h for each framework
- Move the component_repository API functions out of opal/mca/base/base.h
and into opal/mca/base/mca_base_component_repository.h in order to
decrease unnecessary dependencies (e.g., before this, almost
everything in the tree depended on ltdl.h, which is unnecessary --
only a small number of files really need ltdl.h)
This commit was SVN r7127.
Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears.
In addition, the commit contains the following:
1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe
2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well.
In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first).
This commit was SVN r7118.
* don't know what I was thinking, but can't use the MCA_PML_CALL macro on
the two data values, as they don't have things that the macro can
expand into
This commit was SVN r6868.
the values to the PML structure. This will allow PMLs that want to do
hardware matching at the cost of a smaller range of valid tags and cids.
Updated all the places that used the MPI_TAG_UB_VALUE constant to instead
look at the pml struct.
This commit was SVN r6778.
Change all the places where they are used to fit the new name.
Remove the code to check the remote arch from the PML. We will have a GPR mechanism
in ompi_mpi_initialize to do that.
This commit was SVN r6750.
support in OMPI. Currently only enables/disables the architecture
sharing modex in ob1 pml.
* Add sds framework to ompi_info
* Figure out table ids to use for Portals BTL at configure time, since
we should use 30 & 31 on Red Storm, but the reference implementation
only supports 0-8.
* Some bug fixes in Portals UTCP sds
This commit was SVN r6650.
- only call sched_yield if it exists
- don't fail out if modex doens't work in ob1
- bunch of fixes for Portals BTL
- add cnos rml component
- add NULL gpr component (should only be used if replica AND proxy
fail to load)
This commit was SVN r6629.
1. Modify the registry to eliminate redundant data copying for startup messages.
2. Revise the subscription/trigger system to avoid redundant storage of triggers and subscriptions. This dramatically reduces the search time when a registry action occurs - to illustrate the point, there are now only a handful of triggers on the system for each job. Before, there were a handful of triggers for each PROCESS in the job, all of which had to be checked every time something happened on the registry. This is much, much faster now.
3. Update all subscriptions to the new format. There are now "named" subscriptions - this allows you to "name" a subscription that all the processes will be using. The first one to hit the registry actually defines the subscription. From then on, any subsequent "subscribes" to the same name just cause that process to "attach" to the existing subscription. This keeps the number of subscriptions being tracked by the registry to a minimum, while ensuring that each process still gets notified.
4. Do the same for triggers.
Also fixed a duplicate subscription problem that was causing people to receive data equal to the number of processes times the data they should have received from a trigger/subscription. Sorry about that... :-( ...but it's all better now!
Uncovered a situation where the modex data seems to be getting entered on the registry a second time - the latter time coming after the compound command has been "fired", thereby causing all the subscriptions to fire. Asked Tim and Jeff to look into this.
Second phase of the changes will involve modifying the xcast system so that the same message gets sent to all processes. This will further reduce the message traffic, and - once we have a true "broadcast" version of xcast - really speed things up and improve scalability.
This commit was SVN r6542.
multiple components to share a single mpool module (e.g., the
ptl/btl and coll sm components).
- Re-tool the ptl, btl, and coll sm components to first look for the
target mpool module, and if they don't find it, to create it.
- coll sm component now correctly identifies when it is supposed to
run or not (i.e., if all the processes in the communicator are on
the same host). Now we just need to fill in some algorithms. :-)
This commit was SVN r6530.
is a lot more difficult than a PTL, and it can adapt it's behavior to the level of threading required
by the user. In this case the behavior is the priorit of the PML. Therefore this information is never
availale before the init function (of the PML) is called. So I try to keep nearly the same structure
as it was before, with one change. When a PML get initialized it does not necessarily means it has been
selected, so it does not means it has to create all it's internal structures (and select the PTL and
all this stuff). They can all be done later, when a PML knows that it definitively get selected
(when the enable function is called with the argument set to true). Thus, in the case of a PML close
one have to check if the PML has been selected or not before trying to clean up the internals.
I had to change the MPI_Init function to allow the PML to be enabled before we start adding procs inside.
This commit was SVN r6434.
components to succeed with --enable-dist. Instead, just add them to
all_components and make dist will still work - we're going to stamp out
the Makefiles no matter what
* Add missing header to ob1 pml for make dist
* Clean up the Portals BTL configure code
This commit was SVN r6413.
- After long discussions and ruminations on how we run components in
LAM/MPI, made the decision that, by default, all components included
in Open MPI will use the version number of their parent project
(i.e., OMPI or ORTE). They are certaint free to use a different
number, but this simplification makes the common cases easy:
- components are only released when the parent project is released
- it is easy (trivial?) to distinguish which version component goes
with with version of the parent project
- removed all autogen/configure code for templating the version .h
file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
same version number (i.e., they all come from the same top-level
VERSION file). But this paves the way for the Great Configure
Reorganization, where, among other things, each project will have
its own version number.
So all in all, we went from a boatload of version numbers to
[effectively] three. That's pretty good. :-)
This commit was SVN r6344.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
