check for providing a data representation that is actually supported
by ompio.
Add also one check for a non-NULL pointer in mpi/c/file_set_view
for the data representation.
Also fixes parts of issue #5643
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
Several fixes to string handling:
1. strncpy() -> opal_string_copy() (because opal_string_copy()
guarantees to NULL-terminate, and strncpy() does not)
2. Simplify a few places, such as:
* Since opal_string_copy() guarantees to NULL terminate, eliminate
some memsets(), etc.
* Use opal_asprintf() to eliminate multi-step string creation
There's more work that could be done; e.g., this commit doesn't
attempt to clean up any strcpy() usage.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
OpenJDK 11 changed the default javadoc output HTML version to HTML 5
from HTML 4.01. It causes an error on building Open MPI configured
with `--enable-mpi-java` (default: disable). This fix is compatible
with older OpenJDK.
I don't know whether this problem exists with other vender's JDKs.
But this fix should be compatible with other JDKs because the new
syntax is used in other places in the same file.
Thanks to Siegmar Gross for the bug report.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
On OS X, where #pragma ident and #ident aren't supported, the
use of a static const star that was never used was generating
a warning (and, it should be noted, was useless, because the
compiler would optimize it away). Fix up the ident declaration
so that it is only created once in libmpi_mpifh.la.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Following the commit f750c6932c, I compared
`ompi/mpi/fortran/use-mpi-f08/*.F90` and
`ompi/mpi/fortran/use-mpi-f08/profile/p*.F90`, and
`ompi/mpi/fortran/use-mpi-f08/mod/mpi-f08-interfaces.F90` and
`ompi/mpi/fortran/use-mpi-f08/mod/pmpi-f08-interfaces.F90`.
There are many differences. Some are bugs of `MPI_*`, some are
bugs of `PMPI_*`. I'm not sure how these bugs affect applications.
To make it easy to compare these files future, I also removed
editorial differences.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The old/deprecated form of the file errhandler typedef used "fn" as a
suffix. The new form uses the name "function".
The MPI API typedef name has already been updated to use "function";
this commit updates the internal Open MPI typedef to use the name
"function" to match the MPI API name and avoid confusion.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Corrected the signatures of the collectives used by the Fortran 2008
interface to state correct intent for inout arguments and use the
ASYNCHRONOUS attribute in non-blocking collective calls.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Corrected the signatures of the collectives used by the Fortran 2008
interface to state correct intent for inout arguments and use the
ASYNCHRONOUS attribute in non-blocking collective calls. Also corrected
the C-bindings in Fortran accordingly
Signed-off-by: Philipp Otte <philipp.j.otte@googlemail.com>
- do not generate bindings for pompi_FOO_f symbols
(they are simply not used anywhere)
- move ompi_FOO_f bindings out of mpi_f08.mod into
ompi_mpifh_bindings.mod that is only used at build time
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
We previously needed to have empty targets because AM couldn't handle
having an AM_CONDITIONAL was targets in the "if" statement but not in the
"else". :-(
That now appears as an old automake bug that has been fixed,
so cleanup some Makefile.am
Thanks Jeff for the pointer.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Having the "make_manpage.pl" script in the ompi/ tree broke
"./autogen.pl --no-ompi" (specifically: "make distcheck" of --no-ompi
builds would break).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Blocking `MPI_SCATTER` and `MPI_SCATTERV` were fixed in 506d0e96f4
but noblocking `MPI_ISCATTER` and `MPI_ISCATTERV` were not fixed yet.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
so latest ROM-IO can be used with Open MPI.
Note this first and naive implementation does not use the wait_fn callback.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
the interface if file_get_type_extent did not check
whether the input datatype is valid or not.
Makes the e_get_type_extend_2 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
If a subroutine of the Fortran `use-mpi-f08` binding in an MPI extension
have a `LOGICAL` parameter and no `TYPE(MPI_Status)` parameter,
it needs to use the `mpi_ext` module and call its corresponding subroutine
in the `mpif-h` directory, as explained in
`ompi/mpi/fortran/use-mpi-f08/mpi-f-interfaces-bind.h`.
However, as shown in the figure below, the required directories are dependent
on each other, and "Can't open module file" error occurs at build time.
ompi/mpiext/{extension name}/use-mpi-f08
A |
| |
| V
ompi/mpi/fortran/use-mpi-f08 <--- ompi/mpi/fortran/mpiext (mpi_ext.mod)
In order to solve this problem, change the configuration and the build order.
- divide Fortran extension directory (`ompi/mpi/fortran/mpiext`)
into the directories for `use-mpi` and for `use-mpi-08`
- `ompi/mpi/fortran/mpiext-use-mpi` : for `use-mpi` (mpi_ext.mod)
- `ompi/mpi/fortran/mpiext-use-mpi-f08` : for `use-mpi-08` (mpi_f08_ext.mod)
- change to the following build order about Fortran `use-mpi` and
`use-mpi-f08` bindings in `ompi`
1. mpi_ext bindings of MPI extensions (`mpiext/{extension name}/use-mpi` directory)
2. Fortran use-mpi (`mpi/fortran/use-mpi-[ignore-]tkr` directory)
3. Fortran extension for use-mpi (`mpi/fortran/mpiext-use-mpi` directory)
4. Fortran use-mpi-f08 modules only (`mpi/fortran/use-mpi-f08/mod` directory)
5. mpi_f08_ext bindings of MPI extensions (`mpiext/{extension name}/use-mpi-f08` directory)
6. Fortran use-mpi-f08 (`mpi/fortran/use-mpi-f08` directory)
7. Fortran extension for use-mpi-f08 (`mpi/fortran/mpiext-use-mpi-f08` directory)
Signed-off-by: Kurita, Takehiro <fj6370fp@aa.jp.fujitsu.com>
There was a race condition in 35438ae9b5: if multiple threads invoked
ompi_mpi_init() simultaneously (which could happen from both MPI and
OSHMEM), the code did not catch this condition -- Bad Things would
happen.
Now use an atomic cmp/set to ensure that only one thread is able to
advance ompi_mpi_init from NOT_INITIALIZED to INIT_STARTED.
Additionally, change the prototype of ompi_mpi_init() so that
oshmem_init() can safely invoke ompi_mpi_init() multiple times (as
long as MPI_FINALIZE has not started) without displaying an error. If
multiple threads invoke oshmem_init() simultaneously, one of them will
actually do the initialization, and the rest will loop waiting for it
to complete.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This checkin mainly concerns our internal info keys that are registering
for callbacks via opal_infosubscribe_subscribe(). Those keys need to have
an extra __IN_<key>/val stored to preserve their pre-callback value. So
that means our internal keys are limited to 5 chars shorter than the usual
key length limit.
The code previously would have been silently inactive if a large key happened
to come in, now it warns and also uses snprintf() to avoid compiler warnings.
I'm also making the top-level MPI_Info_set warn if the user uses our reserved
"__IN_" prefix. I had wanted the feature to be more invisible than that, but
it would require a more sophisticated approach to change that.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Per MPI-3.1:8.7.1 p361:11-13, it's valid for MPI_FINALIZED to be
invoked during an attribute destruction callback (e.g., during the
destruction of keyvals on MPI_COMM_SELF during the very beginning of
MPI_FINALIZE). In such cases, MPI_FINALIZED must return "false".
Prior to this commit, we hung in FINALIZED if it were invoked during
a COMM_SELF attribute destruction callback in FINALIZE. See
https://github.com/open-mpi/ompi/issues/5084.
This commit converts the MPI_INITIALIZED / MPI_FINALIZED
infrastructure to use a single enum (ompi_mpi_state, set atomically)
to represent the state of MPI:
- not initialized
- init started
- init completed
- finalize started
- finalize past COMM_SELF destruction
- finalize completed
The "finalize past COMM_SELF destruction" state is what allows us to
return "false" from MPI_FINALIZED before COMM_SELF has been fully
destroyed / all attribute callbacks have been invoked.
Since this state is checked at nearly every MPI API call (to see if
we're outside of the INIT/FINALIZE epoch), care was taken to use
atomics to *set* the ompi_mpi_state value in ompi_mpi_init() and
ompi_mpi_finalize(), but performance-critical code paths can simply
read the variable without needing to use a slow call to an
opal_atomic_*() function.
Thanks to @AndrewGaspar for reporting the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
appends MPI1 compatible source files instead of redefining all the source files
fix a typo from open-mpi/ompi@89da9651bb
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
