http://www.open-mpi.org/community/lists/devel/2010/02/7496.php
Increase the required versions of AM, AC, and LT:
* Autoconf: 2.65
* Automake: 1.11.1
* Libtool: 2.2.6b
And therefore removed a bunch of patches that we used to apply to make
older versions of these tools work.
Also updated the HACKING document to match these version numbers,
specifically mentioned Mercurial in a few places, and removed some
outdated language about running autogen.sh in subdirectories.
This commit was SVN r22896.
error if the file-based dloader (e.g., dlopen) fails to load a DSO for
a complex reason (e.g., unresolved symbol).
This has been widely reported upstream to the libltdl maintainers - a
general solution is difficult. This is very definitely an
OMPI-specific solution. Since our embedded libltdl is hidden behind
visibility flags, that's ok.
Note that this is a change to autogen.sh, but this commit does not
force re-running autogen.sh. You'll just get the new functionality
the next time you re-run autogen.sh.
This commit was SVN r22806.
continuation mark in column 6 is enough to split the lines, we do
the same continuation mark in column 73.
Now, while that would fit any msg., this would produce warnings when
including mpif-config.h with -Wall in gfortran and -warn in ifort.
Just get the SVN Version string short and forget it. Let's see
make check choke on that.
This additionally fixes the HG version string...
(Will mention this in ticket #2259)
This commit was SVN r22620.
* Fix typo in echo message
* Only traverse into orte/ and ompi/ if they exist (i.e., properly
handle --no-orte and --no-ompi tarballs). Note that this was only
a minor error -- before, they just output error messages and
(correctly) kept going. This fix just removes the error messages.
This commit was SVN r22353.
Continue the reorganization of the configure system. Move files from the main config directory to their appropriate level-specific config directories. Modify the configure system to correctly handle compiler detection, test, and setup so that all things pertaining to opal and orte are done at the lower level, with the ompi configure system only looking at mpi-specific options.
Ensure the wrapper compilers for orte and ompi only get built when appropriate. Add support for c++ to the orte wrapper compilers, both script and non-script versions.
This commit was SVN r22138.
Re-enable "./autogen.sh -no-ompi" again. If you -no-ompi, the entire OMPI
configury is skipped and the entire ompi/ subtree is not built. There's
some simple m4-isms that prune out the relevant parts.
I added ompi/config/, orte/config/, and opal/config/ directories. I moved a
bunch of m4 files from the top-level config/ dir into ompi/config/, and a few
into orte/config/.
Note that all 3 <project>/config directories have a config_files.m4 file. This
file contains the AC_CONFIG_FILES list for that project. The AC_CONFIG_FILES
call cannot be in an AC_DEFUN macro and conditionally called -- if it is
included at all, Autoconf will process it. Hence, these config_files.m4 files
don't AC_DEFUN -- they just have AC_CONFIG_FILES. m4_ifdef() is used to
conditionally include the files or not.
I moved a bunch of obvious OMPI-only m4 files from config/ to ompi/config/,
but I'm sure that there's more that could go. A ticket will be filed with
thoughts on future work in this area.
This commit was SVN r22113.
NOTE: the IPv6 support is currently marginally working and has problems when IPv6 headers are present but the interfaces are not configured to use that protocol, per several reports from users. It is unclear that anyone is willing/able to support this capability. Should that situation change, this change can be reconsidered.
This commit was SVN r22039.
* No need for OPAL_SIZEOF_BOOL and OPAL_SIZEOF_INT in comm_inln.h --
just use sizeof()
* Fix logic in ompi_setup_cxx.m4 to account for the case where we
''do'' have a C++ compiler (duh!!)
* Fix spelling error in a shell variable that ended up making a
bad/empty #define
This should bring the trunk back to being functional. Sorry for the
interruption, folks...
This commit was SVN r21758.
The following SVN revision numbers were found above:
r21755 --> open-mpi/ompi@90d6491737
C++ compiler in configure. If we have a C++ compiler, then the MPI
C++ bindings are built by default. If we don't have a C++ compiler,
then the MPI C++ bindings are not built by default.
--enable-mpi-cxx will now force an error if there is no C++ compiler
available. --disable-mpi-cxx (or the lack of a C++ compiler) will now
disable many of the C++ compiler checks in configure.
Note that there are a few items to clean up regarding the difference
between C's _Bool type and C++'s bool type. Right now, we assume that
they are the same. But they aren't, and they shouldn't be treated as
such. This cleanup will be forced in MPI-2.2 with the introduction of
the MPI_C_BOOL MPI datatype.
This commit was SVN r21755.
automatically pick up stdint.h by using AC_INCLUDES_DEFAULT. This is needed
for the types like int8_t which were added last week.
This commit was SVN r21721.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
Tests based on preprocessor CPP output, won't help either, as they
don't spit out nice computed numerical values, but rather the
#define itselve.
This commit was SVN r21364.
produced object file does not contain external sumbols -- bad for the
configure tests to find out external symbols.
The only way to check for Fortran naming convention is to rid of
-ipo and -fast in case of ifort...
Thanks to Michel Devel for bringing this up.
This commit was SVN r21363.
Yes, friends, our favorite PCIE BTL has resurfaced as mgmt vacillates over its existence. This is an updated version that actually mostly works, in its final stages of debugging.
Some generalization still remains to be done...
This commit was SVN r21358.
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
well..)
- As Jeff suggested, for m4 macros, dont use _ OPAL, but
rather OPAL_ prefix
- Set the variable before AC_SUBST, so that replacement happens
in f77 header-file, too.
This commit was SVN r21316.
MPI_MAX_PROCESSOR_NAME
MPI_MAX_ERROR_STRING
MPI_MAX_OBJECT_NAME
MPI_MAX_INFO_KEY
MPI_MAX_INFO_VAL
MPI_MAX_PORT_NAME
MPI_MAX_DATAREP_STRING
Defaults stay as theyr currently are -- and now give an explanation on the
min/max values being used in a central place...
m4-macro _OPAL_WITH_OPTION_MIN_MAX_VALUE may be benefical in other parts
of the configure system.
- We need some of these in the lower level OPAL for an upcoming commit!
All other levels base their values on them.
This commit was SVN r21292.
