Looks like this script was left over from quite a long time ago, and
was expecting CLI params from the "old"-style Automake test engine.
Update it to look for `--test-name` to get the test name, and update a
few other minor style things.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit e8277d9d06)
As indicated in the MPI3.2 document 14.3.10 page 599 line 1, the only
MPI error code possible is MPI_SUCCESS. All other errors must be in the
error class MPI_T_ERR*.
Fix the return of few pvar/cvar function that failed to correctly
convert to an MPI error code.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
(cherry picked from commit f4af1848c9)
These variables were renamed in
904276bb44caec207638247f23139bc21bc6a09e; update them to use the new
names.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 2ab8109be1)
The issue was a little complicated due to the internal stack used in the
convertor. The main issue was that in the case where we run out of iov
space to save the raw description of the data while hanbdling a
repetition (loop), instead of saving the current position and bailing out
directly we reading of the next predefined type element. It worked in
most cases, except the one identified by the HDF5 test. However, the
biggest issue here was the drop in performance for all ensuing calls to
the convertor pack/unpack, as instead of handling contiguous loops as a
whole (and minimizing the number of memory copies) we copied data
description by data description.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
(back-ported from commit open-mpi/ompi@5a82c4fd07)
correctly handle the case in which iovec is full and the
last accessed element of the datatype is the beginning of a loop
Refs. open-mpi/ompi#6285
Thanks Axel Huebl for reporting this
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(back-ported from commit open-mpi/ompi@0832ab5acc)
Thanks Zoltan Mizsei for bringing this to our attention.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@a02be5e91a)
This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
The mpool/memkind component was using a deprecated "partitions" API.
This commit refactors the memkind component to make use of the
supported public API.
The public API uses 3 parameters to specify a mpool "kind":
- a memkind type (which for now is just default or HBM)
- a memkind policy
- a memkind_bits (partly to specify pagesize)
The MCA parameters were changed to reflect these memkind
parameters.
Add a make check test for sanity checking of the memkind component.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This commit adds support for fetch-and-op atomics. This is needed
because and and or are irreversible operations so there needs to be a
way to get the old value atomically. These are also the only semantics
supported by C11 (there is not atomic_op_fetch, just
atomic_fetch_op). The old op-and-fetch atomics have been defined in
terms of fetch-and-op.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a new set of compare-and-exchange functions. These
functions have a signature similar to the functions found in C11. The
old cmpset functions are now deprecated and defined in terms of the
new compare-and-exchange functions. All asm backends have been
updated.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the atomic compare-and-swap functions to indicate
the return value. This is in preperation for adding support for a
compare-and-swap that returns the old value. At the same time the
return type has been changed to bool.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Cisco wrote a bipartite graph solver to properly solve
interface pair selection for usNIC. Using the reachable
framework, the TCP BTL (and possibly the runtime network
code) can use the graph solver to make more optimal pair
selection. Jeff was happy to have the code more broadly
used, but didn't have time to do the move, hence this
commit.
There are a couple of minor changes to the code compared
to the usNIC version. Obviously, the functions have
been renamed to match naming convention for their new
home. Since it's easier to write unit tests for
util/ code, the unit tests have been made first class
tests run at "make check" time. This last bit required
moving some of the definitions into a new header,
bipartite_graph_internal.h, so that they could be
included in both the library code and the test code.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This test used to have fixed-sized arrays for the mounts that it was
checking. However, we periodically run across machines with more
mounts than can fit into those fixed-size arrays. Rather than
periodically increasing the size of those arrays (after re-discovering
that the error is due to fixed-size arrays), just count how many
entries there are and make arrays that are big enough.
Additionally, add a check to ensure that we don't go over the max size
of the array when reading/filling them.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This test has proven to produce too many false positives so far. I hope
to re-enable it in the future, but until it has a longer history of not
producing false postivies it doesn't need to produce false nuisance
failures for everybody.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Someone posted an MTT test where libmpi_usempi_ignore_tkr.so ended
up with symbols like these being identifed as errors:
[error] MPI
[error] _Cmpi_fortran_status_ignore
[error] _Cmpi_fortran_statuses_ignore
those must be compiler-generated names so we shouldn't identify them
as problematic.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
The linker of Linux/AArch64 (at least) generates `__bss_start__`,
`__bss_end__`, `_bss_end__`, and `__end__` symbols.
`libmpi_usempi_ignore_tkr.so` is added but `libmpi_usempif08.so`
is not added because `use-mpi-f08` has `contains` statements
in modules and compilers automatically generate compiler-specific
symbols for them. For example, gfortran 4.9 generates
`__mpi_f08_callbacks_MOD_mpi_comm_dup_fn` etc.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Every modern compiler supports either inline assembly or builtin atomic
operations. Because of this it is time to delete all the code associated
with pre-built atomics.
This commit also clean out the DEC and XLC asm checks. Neither check
does anything and the XLC compiler supports GCC ASM.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This checks the main libs that would be directly or indirectly linked
against the users executable (libmpi.so, libmpi_mpifh.so, libmpi_usempi.so,
libopen-rte, libopen-pal) using "nm" and looking for symbols without ompi_
opal_ mpi_ etc prefixes.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Add a monitoring PML, OSC and IO. They track all data exchanges between processes,
with capability to include or exclude collective traffic. The monitoring infrastructure is
driven using MPI_T, and can be tuned of and on any time o any communicators/files/windows.
Documentations and examples have been added, as well as a shared library that can be
used with LD_PRELOAD and that allows the monitoring of any application.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* add ability to querry pml monitorinting results with MPI Tools interface
using performance variables "pml_monitoring_messages_count" and
"pml_monitoring_messages_size"
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Fix a convertion problem and add a comment about the lack of component
retain in the new component infrastructure.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Allow the pvar to be written by invoking the associated callback.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Various fixes for the monitoring.
Allocate all counting arrays in a single allocation
Don't delay the initialization (do it at the first add_proc as we
know the number of processes in MPI_COMM_WORLD)
Add a choice: with or without MPI_T (default).
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Cleanup for the monitoring module.
Fixed few bugs, and reshape the operations to prepare for
global or communicator-based monitoring. Start integrating
support for MPI_T as well as MCA monitoring.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Adding documentation about how to use pml_monitoring component.
Document present the use with and without MPI_T.
May not reflect exactly how it works right now, but should reflects
how it should work in the end.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Change rank into MPI_COMM_WORLD and size(MPI_COMM_WORLD) to global variables in pml_monitoring.c.
Change mca_pml_monitoring_flush() signature so we don't need the size and rank parameters.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Improve monitoring support (including integration with MPI_T)
Use mca_pml_monitoring_enable to check status state. Set mca_pml_monitoring_current_filename iif parameter is set
Allow 3 modes for pml_monitoring_enable_output: - 1 : stdout; - 2 : stderr; - 3 : filename
Fix test : 1 for differenciated messages, >1 for not differenciated. Fix output.
Add documentation for pml_monitoring_enable_output parameter. Remove useless parameter in example
Set filename only if using mpi tools
Adding missing parameters for fprintf in monitoring_flush (for output in std's cases)
Fix expected output/results for example header
Fix exemple when using MPI_Tools : a null-pointer can't be passed directly. It needs to be a pointer to a null-pointer
Base whether to output or not on message count, in order to print something if only empty messages are exchanged
Add a new example on how to access performance variables from within the code
Allocate arrays regarding value returned by binding
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add overhead benchmark, with script to use data and create graphs out of the results
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix segfault error at end when not loading pml
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Start create common monitoring module. Factorise version numbering
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix microbenchmarks script
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Improve readability of code
NULL can't be passed as a PVAR parameter value. It must be a pointer to NULL or an empty string.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add osc monitoring component
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add error checking if running out of memory in osc_monitoring
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Resolve brutal segfault when double freeing filename
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Moving to ompi/mca/common the proper parts of the monitoring system
Using common functions instead of pml specific one. Removing pml ones.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add calls to record monitored data from osc. Use common function to translate ranks.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix test_overhead benchmark script distribution
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix linking library with mca/common
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add passive operations in monitoring_test
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix from rank calculation. Add more detailed error messages
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix alignments. Fix common_monitoring_get_world_rank function. Remove useless trailing new lines
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix osc_monitoring mget_message_count function call
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Change common_monitoring function names to respect the naming convention. Move to common_finalize the common parts of finalization. Add some comments.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add monitoring common output system
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add error message when trying to flush to a file, and open fails. Remove erroneous info message when flushing wereas the monitoring is already disabled.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Consistent output file name (with and without MPI_T).
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Always output to a file when flushing at pvar_stop(flush).
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Update the monitoring documentation.
Complete informations from HowTo. Fix a few mistake and typos.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Use the world_rank for printf's.
Fix name generation for output files when using MPI_T. Minor changes in benchmarks starting script
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Clean potential previous runs, but keep the results at the end in order to potentially reprocess the data. Add comments.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add security check for unique initialization for osc monitoring
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Clean the amout of symbols available outside mca/common/monitoring
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Remove use of __sync_* built-ins. Use opal_atomic_* instead.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Allocate the hashtable on common/monitoring component initialization. Define symbols to set the values for error/warning/info verbose output. Use opal_atomic instead of built-in function in osc/monitoring template initialization.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Deleting now useless file : moved to common/monitoring
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add histogram ditribution of message sizes
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add histogram array of 2-based log of message sizes. Use simple call to reset/allocate arrays in common_monitoring.c
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add informations in dumping file. Separate per category (pt2pt/osc/coll (to come)) monitored data
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add coll component for collectives communications monitoring
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix warning messages : use c_name as the magic id is not always defined. Moreover, there was a % missing. Add call to release underlying modules. Add debug info messages. Add warning which may lead to further analysis.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix log10_2 constant initialization. Fix index calculation for histogram array.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add debug info messages to follow more easily initialization steps.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Group all the var/pvar definitions to common_monitoring. Separate initial filename from the current on, to ease its lifetime management. Add verifications to ensure common is initialized once only. Move state variable management to common_monitoring.
monitoring_filter only indicates if filtering is activated.
Fix out of range access in histogram.
List is not used with the struct mca_monitoring_coll_data_t, so heritate only from opal_object_t.
Remove useless dead code.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix invalid memory allocation. Initialize initial_filename to empty string to avoid invalid read in mca_base_var_register.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Don't install the test scripts.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix missing procs in hashtable. Cache coll monitoring data.
* Add MCA_PML_BASE_FLAG_REQUIRE_WORLD flag to the PML layer.
* Cache monitoring data relative to collectives operations on creation.
* Remove double caching.
* Use same proc name definition for hash table when inserting and
when retrieving.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Use intermediate variable to avoid invalid write while retrieving ranks in hashtable.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add missing release of the last element in flush_all. Add release of the hashtable in finalize.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Use a linked list instead of a hashtable to keep tracks of communicator data. Add release of the structure at finalize time.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Set world_rank from hashtable only if found
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Use predefined symbol from opal system to print int
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Move collective monitoring data to a hashtable. Add pvar to access the monitoring_coll_data. Move functions header to a private file only to be used in ompi/mca/common/monitoring
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix pvar registration. Use OMPI_ERROR isntead of -1 as returned error value. Fix releasing of coll_data_t objects. Affect value only if data is found in the hashtable.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add automated check (with MPI_Tools) of monitoring.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix procs list caching in common_monitoring_coll_data_t
* Fix monitoring_coll_data type definition.
* Use size(COMM_WORLD)-1 to determine max number of digits.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add linking to Fortran applications for LD_PRELOAD usage of monitoring_prof
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add PVAR's handles. Clean up code (visibility, add comments...). Start updating the documentation
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix coll operations monitoring. Update check_monitoring accordingly to the added pvar. Fix monitoring array allocation.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Documentation update.
Update and then move the latex and README documentation to a more logical place
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Aggregate monitoring COLL data to the generated matrix. Update documentation accordingly.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix monitoring_prof (bad variable.vector used, and wrong array in PMPI_Gather).
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add reduce_scatter and reduce_scatter_block monitoring. Reduce memory footprint of monitoring_prof. Unify OSC related outputs.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add the use of a machine file for overhead benchmark
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Check for out-of-bound write in histogram
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Fix common_monitoring_cache object init for MPI_COMM_WORLD
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add RDMA benchmarks to test_overhead
Add error file output. Add MPI_Put and MPI_Get results analysis. Add overhead computation for complete sending (pingpong / 2).
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add computation of average and median of overheads. Add comments and copyrigths to the test_overhead script
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add technical documentation
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Adapt to the new definition of communicators
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Update expected output in test/monitoring/monitoring_test.c
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add dumping histogram in edge case
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Adding a reduce(pml_monitoring_messages_count, MPI_MAX) example
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add consistency in header inclusion.
Include ompi/mpi/fortran/mpif-h/bindings.h only if needed.
Add sanity check before emptying hashtable.
Fix typos in documentation.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* misc monitoring fixes
* test/monitoring: fix test when weak symbols are not available
* monitoring: fix a typo and add a missing file in Makefile.am
and have monitoring_common.h and monitoring_common_coll.h included in the distro
* test/monitoring: cleanup all tests and make distclean a happy panda
* test/monitoring: use gettimeofday() if clock_gettime() is unavailable
* monitoring: silence misc warnings (#3)
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
* Cleanups.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Changing int64_t to size_t.
Keep the size_t used accross all monitoring components.
Adapt the documentation.
Remove useless MPI_Request and MPI_Status from monitoring_test.c.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add parameter for RMA test case
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Clean the maximum bound computation for proc list dump.
Use ptrdiff_t instead of OPAL_PTRDIFF_TYPE to reflect the changes from commit fa5cd0dbe5.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add communicator-specific monitored collective data reset
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
* Add monitoring scripts to the 'make dist'
Also install them in the build and the install directories.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
The library that is installed is specific to Open MPI, so put an
"ompi_" prefix on it.
Also do some minor line wrappings and cleanups of text.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* Don't overflow the internal datatype count.
Change the type of the count to be a size_t (it does not alter the total
size of the internal structures, so has no impact on the ABI).
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Optimize the datatype creation.
The internal array of counts of predefined types is now only created
when needed, which is either in a heterogeneous environment, or when
one call get_elements. It saves space and makes the convertor creation a
little faster in some cases.
Rearrange the fields in the datatype description structs.
The macro OPAL_DATATYPE_INIT_PTYPES_ARRAY had a bug, and the
static array was only partially created. All predefined types should
have the ptypes array created and initialized.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Fix the boundary computation.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* test/datatype: add test for short unpack on heteregeneous cluster
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Trying to reduce the cost of creating a convertor.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Respect the unpack boundaries.
As Gilles suggested on #2535 the opal_unpack_general_function was
unpacking based on the requested count and not on the amount of packed
data provided.
Fixes#2535.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
since Open MPI now requires a C99, and ptrdiff_t type is part of C99,
there is no more need for the abstract OPAL_PTRDIFF_TYPE type.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
* Complete rewrite of opal_pointer_array
Instead of a cache oblivious linear search use a bits array
to speed up the management of the free space. As a result we
slightly increase the memory used by the structure, but we get a
significant boost in performance.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Do not register datatypes in the f2c translation table.
The registration is now done up into the Fortran layer, by
forcing a call to MPI_Type_c2f.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Add a configure time option to rename libmpi(_FOO).*
- `--with-libmpi-name=STRING`
* This commit only impacts the installed libraries.
Internal, temporary libraries have not been renamed to limit the
scope of the patch to only what is needed.
For example:
```shell
shell$ ./configure --with-libmpi-name=wookie
...
shell$ find . -name "libmpi*"
shell$ find . -name "libwookie*"
./lib/libwookie.so.0.0.0
./lib/libwookie.so.0
./lib/libwookie.so
./lib/libwookie.la
./lib/libwookie_mpifh.so.0.0.0
./lib/libwookie_mpifh.so.0
./lib/libwookie_mpifh.so
./lib/libwookie_mpifh.la
./lib/libwookie_usempi.so.0.0.0
./lib/libwookie_usempi.so.0
./lib/libwookie_usempi.so
./lib/libwookie_usempi.la
shell$
```
