Since openib is on its long, slow way out the door, don't let it
complain about not being able to find any NICs at run time.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit updates the patcher component to either use the
__clear_cache intrinsic or the correct assembly to flush the
instruction cache.
Fixes#5631
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug when using the UCT btl with the UCX memory
hooks disabled. We were misssing a call to
opal_mem_hooks_unregister_release to remove the btl memory hook
callback.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Ensure that the project, framework, component, and variable names are
lower than max lengths. This is a follow-on to
992a8e8297, per discussion on
https://github.com/open-mpi/ompi/pull/5642.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
If someone specifies --with-verbs-usnic, actually do a configury check
to ensure that it will compile (vs. assuming that it will compile if
someone asks for it).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Since version hwloc 2.0.0 has a new organization of NUMA nodes on the
topology tree. This commit adds the detection of local NUMA object for
hwloc => 2.0.0, which fixes the procs bindings policy for rmaps mindist
component.
Signed-off-by: Boris Karasev <karasev.b@gmail.com>
bugfix: major: openib send credits returned correctly after a fault for pending frags to dead processes; also tweak the default IB retry timeouts tomake this happen faster
Make it compile in non-debug builds
Mark the IB endpoint as failed when invoking an error; this resolves UDCM connection deadlocks
Changing the default IB retry timeouts is not a good idea.
We'll need to find another way to speedup credit recovery in failure cases.
Remove ULFM specific cases
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
When an error is returned by the socket operations, trigger the
appropriate error path in the PML to give an opportunity for
rerouting/error handling.
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
The write memory barrier was intended to precede setting a fast-box
header but instead follows it. This commit moves the memory barrier to
the intended location.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The Autoconf AC_CONFIG_* macros can only be instantiated exacly once
for any given file, *and* they must be in a code execution path at run
time for the target file to be generated at the end of configure.
For example, if you want to generate file ABC at the end of configure,
you must invoke the AC_CONFIG_FILES(ABC) macro in a code path that
will get executed when configure is run.
That's pretty straightforward.
What's not straightforward is two corner cases:
1. You cannot invoke the AC_CONFIG_FILES(ABC) macro for the same file
more than once. If you do, autoreconf will fail (even before you
can run configure).
2. If AC_CONFIG_FILES(ABC) is not in a code path that is executed by
configure, the file ABC is not registered properly, and ABC will
not be generated at the end of configure.
This applies to hwloc because hwloc's HWLOC_SETUP_CORE macro calls
both AC_CONFIG_FILES and AC_CONFIG_HEADER to setup its Makefiles
(etc.) so that targets like "make distclean" and "make distcheck" will
work properly. Hence, we *have* to invoke HWLOC_SETUP_CORE.
However, the MCA_opal_hwloc_hwloc201_CONFIG macro has a few side
effects. It would be nice to do able to do something like this:
```
if hwloc:extern is going to be used:
Invoke minimal HWLOC_SETUP_CORE (with no side effects)
else
Invoke full HWLOC_SETUP_CORE (with side effects)
fi
```
But we can't, because autoreconf will detect that AC_CONFIG_FILES has
been invoked on the same files more than once (regardless of whether
those code paths will be executed at run time or not). Kaboom.
Similarly, we can't do this:
```
if hwloc:extern is not going to be used:
Invoke full HWLOC_SETUP_CORE (with side effects)
fi
```
Because then hwloc's AC_CONFIG_FILES won't be registered properly when
hwloc:external *is* used (i.e., when the HWLOC_SETUP_CORE macro is not
in a code path that is executed at run time), and targets like "make
distclean" will fail because hwloc's Makefiles won't have been setup.
Kaboom.
But remember that the hwloc framework is a bit special: there will
only ever be 2 comoponents: external and internal. External is
guaranteed to be configured first because of its priority. So the
internal component (i.e., this component) immediately knows if it is
going to be used or not based on whether the external component
configuration succeeded or failed.
Specifically: regardless of whether the internal component (i.e., this
component) is going to be used, we have to invoke HWLOC_SETUP_CORE.
But we can manage the side effects: allow the side effects when
this/internal component is going to be used, and avoid the side
effects when this/internal component is not going to be used.
This is a little less clean than I would have liked, but because of
Autoconf's oddity about its AC_CONFIG_* macros, this is the only
solution I could come up with.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
In order to make "make distclean" (and friends) work, we need to
*always* invoke the embedded configure script -- even if we know that
we're not going to use this component.
But in cases where we know we're not going to use this component, we
also need to avoid the side effects of the code path that is used when
we *do* want to use this component. So split the two possibilities
into two different macros:
1. MCA_opal_event_libevent2022_FAKE_CONFIG: which does almost nothing
except invoke the underlying "configure" script.
2. MCA_opal_event_libevent2022_REAL_CONFIG: which does all the real
work (including invoking the underlying "configure" script).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
We know that event:external will be configured first (because of its
priority). Take advantage of that here in libevent2022 by having it
refuse to configure / politely fail if event:external succeeded.
Also print out some additional lines in configure output indicating
what is going on (i.e., event:external succeeded, so this component
will be skipped, or event:external failed, so this component will be
used).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
We know that hwloc:external will be configured first (because of its
priority). Take advantage of that here in hwloc201 by having it
refuse to configure / politely fail if hwloc:external succeeded.
Also print out some additional lines in configure output indicating
what is going on (i.e., hwloc:external succeeded, so this component
will be skipped, or hwloc:external failed, so this component will be
used).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The 2 sided communication support is added for non-tagmatching provider
to take advantage of this BTL and PML OB1. The current state is
"functional" and not optimized for performance.
Two sided support is disabled by default and can be turned on by mca
parameter: "mca_btl_ofi_mode".
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
Things got a little out of whack and we weren't actually processing the map-by modifiers, plus an error crept into the display of the binding report. So clean those up.
Thanks to @tonyreina for the error report
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Per https://github.com/open-mpi/ompi/issues/5031, if the user didn't specify a particular PMIx installation, then default back to the internal version if it is newer than the discovered external one. PMIx doesn't yet provide a full signature so we have to just get as close as possible for now.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Due to decreasing support by vendors/other orgs for the OpenIB BTL,
only look for iWarp/RoCE devices by default. Allow IB HCAs
with ports configured for ethernet.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
OFI BTL uses context for completion but never ask for it in
fi_getinfo(3). This commit makes sure that we always ask for FI_CONTEXT
to eliminate any potential error.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
This commit fixes two bugs in the RMA/atomic emulation code:
1) Fix a fragment leak when using AMO emulation.
2) Always initialize the single-copy emulation code. This is required
to use the AMO support.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
If OMPI is configured with `--with-hwloc=external` or `--with-hwloc=DIR`
and gfortran is used, I see a lot of warnings when compiling files
under the `ompi/mpi/fortran` directory.
```
f951: Warning: Nonexistent include directory
'BUILD_DIR/opal/mca/hwloc/external/hwloc/include' [-Wmissing-include-dirs]
```
There is no such `include` directory in the source tree and `configure`-
created tree. I think these lines in the `configure.m4` file are wrongly
copied from that for the embedded `hwlocXXX` component in the past.
The `-Wmissing-include-dirs` option is enabled in gfortran by default
but it is not enabled by default (or even with `-Wall`) in gcc and g++.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
- added common logging infrastructure for all
UCX modules
- all UCX modules are switched to new infra
Signed-off-by: Sergey Oblomov <sergeyo@mellanox.com>
The descriptor flags field in a fragment were being ready after the
fragment may have been freed. This commit reads the flags before
calling the user callback.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for atomic operations as well as rdma for
systems without rdma support. This support is implemented using an
internal send tag.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
- some common functionality of del_procs calls is moved into
mca_common module
- blocking ucp_put call is replaced by non-blocking routine
Signed-off-by: Sergey Oblomov <sergeyo@mellanox.com>
The current cast is *functional*, but isn't really the way it should
be done. This commit makes the cast the way it should be done.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Fix two facepalms:
1. The "uint32" in the hash map functions refer to the *key* size, not
the *value* size. The values are always 64 bits.
2. Pass the straight value to the "set" functions -- not the pointer
to the value.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit changed the way btl/ofi call progress. Before, we force
progression with every rdma/atomic call. This gives performance boost in
some case and slow down on others. Now we only force progression after
some number of rdma calls which result in better performance overall.
Also added new MCA parameter 'mca_btl_ofi_progress_threshold' to set
the threshold number. The new default is 64.
Also:
Added FI_DELIVERY_COMPLETE to tx_rtx flags to ensure that the completion
is generated after the message has been received on the remote side.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
This commit improves the injection rate and latency for RDMA
operations. This is done by the following improvements:
- If C11's _Thread_local keyword is available then always use the
same virtual device index for the same thread when using RDMA. If
the keyword is not available then attempt to use any device that
isn't already in use. The binding support is enabled by default but
can be disabled via the btl_ugni_bind_devices MCA variable.
- When posting FMA and RDMA operations always attempt to reap
completions after posting the operation. This allows us to
better balance the work of reaping completions across all
application threads.
- Limit the total number of outstanding BTE transactions. This
fixes a performance bug when using many threads.
- Split out RDMA and local SMSG completion queue sizes. The RDMA
queue size is better tuned for performance with RMA-MT.
- Split out put and get FMA limits. The old btl_ugni_fma_limit MCA
variable is deprecated. The new variable names are:
btl_ugni_fma_put_limit and btl_ugni_fma_get_limit.
- Change how post descriptors are handled. They are no longer
allocated seperately from the RDMA endpoints.
- Some cleanup to move error code out of the critical path.
- Disable the FMA sharing flag on the CDM when we detect that there
should be enough FMA descriptors for the number of virtual devices
we plan will create. If the user sets this flag we will not unset
it. This change should improve the small-message RMA performance by
~ 10%.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a new btl for one-sided and two-sided. This btl
uses the uct layer in OpenUCX. This btl makes use of multiple uct
contexts and per-thread device pinning to provide good performance
when using threads and osc/rdma. This btl has been tested extensively
with osc/rdma and passes all MTT tests on aries and IB hardware.
For now this new component disables itself but can be enabled by
setting the btl_ucx_transports MCA variable with a comma-delimited
list of supported memory domains/transport layers. For example:
--mca btl_uct_memory_domains ib/mlx5_0. The specific transports used
can be selected using --mca btl_uct_transports. The default is to use
any available transport.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The giant size of the TCP proc struct is causing a problem in some
environments (because it is allocated on the stack), and it was too
big, anyway.
Instead, use a hash map. That way, it starts small and can grow if it
needs to. It also makes no assumptions about the values of the kernel
interface indexes.
Fixes#5292.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Since the new binding option is tied to the --cpu-list orterun CLI
option, make the --bind-to option reflect the same name (vs. the
--cpu-set CLI option, which is entirely different). For example:
mpirun --bind-to cpu-list:ordered ...
Note that "--bind-to cpulist:ordered" is accepted as a synonym,
because people will be lazy.
Also add some minor updates to the orterun.1in man page for
clarification.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Allow users to request that procs be bound to a cpu in a given cpu-list based on their corresponding local rank
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cover all data types for OPAL-to-PMIx conversion, generating error logs when we hit something we don't support
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
In the opal list parsing behavior paths should be separated by ':' while files are separated by ','. In the opal and pmix code (the pmix fix is in a separate commit) there was a mistake in the parsing such that files were being separated by ':' when they should be separated by ','s. This commit attempts to address this mismatch.
Signed-off-by: Noah Evans <noah.evans@gmail.com>
This commit add support for scalable endpoint to enhance multithreaded
application performance. The BTL will detect the support from ofi
provider and will fallback to normal usage of scalable endpoint is not
supported.
NEW MCA parameters:
- mca_btl_ofi_disable_sep: force the btl to not use scalable endpoint.
- mca_btl_ofi_num_contexts_per_module: number of communication context
to create (should be the same as number of thread).
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
FI_MR_UNSPEC is not supposed to be used beyond ofi version 1.5. This
commit replaces FI_MR_UNSPEC with the new FI_MR_BASIC mode bits
(FI_MR_PROV_KEY | FI_MR_ALLOCATED | FI_MR_VIRT_ADDR).
The btl functionality remains the same.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
OFI sockets provider will sometime return FI_EINTR. Apparently this flag
does not exist in OFI version 1.5. This commit added an ifdef check.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
This commit adds patcher support of aarch64. The current
implementation uses mov, movk, and br to perform the jump. This uses 5
instructions.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes problem where users have libfabric version < 1.5
installed and build failed because the new MR modebits does not exist.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
Get the OMPI rte/pmix component working. This was tested using PRRTE as the RM, configuring OMPI using:
* autogen --no-orte
* with external libevent, external hwloc, and external PMIx master
* configuring PMIx master with the same libevent and hwloc
* execute the application using PRRTE's "prun" launcher, which has the same cmd line as ORTE's mpirun
Note that PMIx master appears to have a bug in the event notification system that caches job termination events. Thus, the first execution runs fine, but subsequent executions cause an "abort" when the OMPI default error handler is invoked upon notification of the prior job's termination. Will work that separately.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit 134cca9ac0de092d767999357573a31703f72292)
This commit added new transport layer to be used with osc rdma module.
This BTL provides put, get, atomic and fetch atomic operations. It can
be used with multiple hardware vendors as long as they have their
provider under Libfabric and have the right capabilities.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
Don't do a recursive search (hence no need for *idx anymore).
Find the level depth, to hide cache-issues first.
Then iterate over that level to find the objects we want.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
df_search_min_bound() would need to be fixed for hwloc 2.0,
but it's only used in opal_hwloc_base_find_min_bound_target_under_obj()
which isn't used anymore. So just remove all of them.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
As @hjelmn and I discussed, this is a little hacky. However, it is the only solution that can be done solely from the OMPI side.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
The mpool/memkind component was using a deprecated "partitions" API.
This commit refactors the memkind component to make use of the
supported public API.
The public API uses 3 parameters to specify a mpool "kind":
- a memkind type (which for now is just default or HBM)
- a memkind policy
- a memkind_bits (partly to specify pagesize)
The MCA parameters were changed to reflect these memkind
parameters.
Add a make check test for sanity checking of the memkind component.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This commit fixes a segfault in btl-portals4 add_procs(). The segfault
occurs if add_procs() is called after a del_procs() call that reduces
the proc count to zero which would cause PT and NI resources to be
freed. This commit resolves the segfault by using a common
initiailization boolean and only freeing module resources in
finalize().
Signed-off-by: Todd Kordenbrock (thkgcode@gmail.com)
Have Open MPI's PMIx component to set PMIx's "show_load_errors" to do
the same thing that Open MPI's "show_load_errors" does.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Some of the show_help() messages that were added in 40afd525f8 were
really normal / expected behavior (e.g., if 2 peers connect in the TCP
BTL more-or-less simultaneously, one of them will drop the connection
-- no need to show_help() about this; it's expected behavior). Roll
back these messages to be opal_output_verbose() kinds of messages.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The strtoul function returns the pointer to the first non-digit character, which is a '.' in this case. Calling strtoul at that point will always yield a zero - you have to move past it to get the remaining number
Thanks to Greg Lee for the detailed analysis of the problem.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Simple MCA vars for ext1, ext2, and pmix3 components to reflect what
the underlying PMIx library version is. For example:
```
$ ompi_info --param pmix pmix3x --parsable --level 9 | grep
library_version
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:value:PMIx library version 3.0.0 (embedded in Open MPI)
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:source:default
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:status:writeable
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:level:4
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:help:Version of the underlying PMIx library
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:deprecated:no
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:type:string
mca:pmix:pmix3x:param:pmix_pmix3x_library_version:disabled:false
```
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
sizeof(addrs[0].addr_inet)==16 (so that it can handle IPv6 addresses),
but the memory that we are copying from (my_ss->sin_addr) is only 4
bytes long. Don't copy beyond the end of that source buffer.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit fixes the case when local client asks for the key from the
process on the remote node. The local server don't have commit count for
remote ranks, it is maintained by another PMIx server, so commit count
should be ignored for remote requests.
Signed-off-by: Boris Karasev <karasev.b@gmail.com>
The current code path for PMIx_Resolve_peers and PMIx_Resolve_nodes executes a threadshift in the preg components themselves. This is done to ensure thread safety when called from the user level. However, it causes thread-stall when someone attempts to call the regex functions from _inside_ the PMIx code base should the call occur from within an event.
Accordingly, move the threadshift to the client-level functions and make the preg components just execute their algorithms. Create a new pnet/test component to verify that the prge code can be safely accessed - set that component to be selected only when the user directly specifies it. The new component will be used to validate various logical extensions during development, and can then be discarded.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit 456ac7f7af3d9ba09888e3c899eb001daaa24aef)
This is a point-in-time update that includes support for several new PMIx features, mostly focused on debuggers and "instant on":
* initial prototype support for PMIx-based debuggers. For the moment, this is restricted to using the DVM. Supports direct launch of apps under debugger control, and indirect launch using prun as the intermediate launcher. Includes ability for debuggers to control the environment of both the launcher and the spawned app procs. Work continues on completing support for indirect launch
* IO forwarding for tools. Output of apps launched under tool control is directed to the tool and output there - includes support for XML formatting and output to files. Stdin can be forwarded from the tool to apps, but this hasn't been implemented in ORTE yet.
* Fabric integration for "instant on". Enable collection of network "blobs" to be delivered to network libraries on compute nodes prior to local proc spawn. Infrastructure is in place - implementation will come later.
* Harvesting and forwarding of envars. Enable network plugins to harvest envars and include them in the launch msg for setting the environment prior to local proc spawn. Currently, only OmniPath is supported. PMIx MCA params control which envars are included, and also allows envars to be excluded.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Important note :
According to the man page
"On success, process_vm_readv() returns the number of bytes read and
process_vm_writev() returns the number of bytes written. This return
value may be less than the total number of requested bytes, if a
partial read/write occurred. (Partial transfers apply at the
granularity of iovec elements. These system calls won't perform a
partial transfer that splits a single iovec element.)"
So since we use a single iovec element, the returned size should either
be 0 or size, and the do loop should not be needed here.
We tried on various Linux kernels with size > 2 GB, and surprisingly,
the returned value is always 0x7ffff000 (fwiw, it happens to be the size
of the larger number of pages that fits a signed 32 bits integer).
We do not know whether this is a bug from the kernel, the libc or even
the man page, but for the time being, we do as is process_vm_readv() could
return any value.
Thanks Heiko Bauke for the bug report.
Refs. open-mpi/ompi#4829
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Fix case where the btl_tcp_links MCA parameter is used to create multiple TCP connections between peers.
Three issues were resulting in hangs during large message transfer:
* The 2nd..btl_tcp_link connections were dropped during establishment because the per-process
address check was binary, rather than a count
* The accept handler would not skip a btl module that was already in use, resulting in all
connections for a given address being vectored to a single btl
* Multiple addresses in the same subnet caused connections to be
stalled, as the receiver would always use the same (first) address
found. Binding the outgoing connection solves this issue
* Lastly fix race condition created by connections being started at the exact same time
by accpeting connections not in the closed state, allowing endpoint_accept to resolve
dispute
Signed-off-by: Jordan Cherry <cherryj@amazon.com>
This commit replaces the current VMA tree implementation with one that
uses the new opal_interval_tree_t class. Since the VMA tree lock is no
longer used this commit also updates rcache/grdma and btl/vader to
take better care when searching for existing registrations.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Follow-on to 8097d09858: now that BTL_VERSION is defined in btl.h, be
a little smarter about whether we define it or not.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit adds a new optional function to the BTL module:
btl_flush. This function takes an optional BTL endpoint. When called
this function completes all outstanding RDMA and atomic operations
started prior to the call to btl_flush.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This header file was meant to be autogenerated, and for
some reasons, was never removed from the repository.
Update .gitignore as well
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Since open-mpi/ompi@47fd2313ab
the backing file is now in /dev/shm by default. As a consequence,
the backing file name has to include the jobid so more than one job
can run at a time.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Resolve a race condition between registering for a file to be removed upon termination and actual creation of that file by providing attributes that identify whether the path is a file or directory. This removes the need for PMIx to detect the difference.
Refs #4686
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit fixes an issue when a registration is created for a large
region and then invalidated while part of it is in use.
References #4509
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit moves the backing files to /dev/shm to avoid limitations
that may be set on /tmp. The files are registered with pmix to ensure
they are cleaned up after an erroneous exit.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 48101278160672317ade352365592f56ef3b8977)
If available, have apps use registration capability to cleanup their session directories. Setup capability for vader to register its shared memory file location - let someone familiar with that code do so.
Final cleanup to track uid/gid, update the opal/pmix API to pass flags for ignore and leave top directory alone
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
It is possible to have parts of an in-use registered region be passed
to munmap or madvise. This does not necessarily mean the user has made
an error but does mean the entire region should be invalidated. This
commit checks that the munmap or madvise base matches the beginning of
the cached region. If it does and the region is in-use then we print
an error. There will certainly be false-negatives where a user
unmaps something that really is in-use but that is preferrable to a
false-positive.
References #4509
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
There were multiple paths that could lead to a fast box
allocation. One of them made little sense (in-place send) so it has
been removed to allow a rework of the fast-box send function. This
should fix a number of issues with hanging/crashing when using the
vader btl.
References #4260
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
set the key of all mpool_tree_item objects, so they can be retrieved
in mpool_base_free and then returned back to the
mca_mpool_base_tree_item_free_list free list.
Refs. open-mpi/ompi#4567
Thanks Philip Blakely for the bug report.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit adds support for fetch-and-op atomics. This is needed
because and and or are irreversible operations so there needs to be a
way to get the old value atomically. These are also the only semantics
supported by C11 (there is not atomic_op_fetch, just
atomic_fetch_op). The old op-and-fetch atomics have been defined in
terms of fetch-and-op.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit eliminates the old opal_atomic_bool_cmpset functions. They
have been replaced by the opal_atomic_compare_exchange_strong
functions.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
if PMIx (version > 1.x) is active since all diagnostic messages will instead flow thru
the PMIx connection. Unfortunately, PMIx v1 does not support this
feature, but we can remove the stddiag support once PMIx v1 slides out
of the support window
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
of "unset".
mtl/psm2: Update some shadow mca parameters to use the default "unset".
mtl/psm2: Add new shadow parameter to allow specifying the service level.
Signed-off-by: Matias A Cabral <matias.a.cabral@intel.com>
Store the pointer to the object handle and not the pointer to the
pointer.
We should not assert(0) in the code !
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
This commit renames the atomic compare-and-swap functions to indicate
the return value. This is in preperation for adding support for a
compare-and-swap that returns the old value. At the same time the
return type has been changed to bool.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The problem is that the waiting thread is cycling using OMPI_LAZY_WAIT_FOR_COMPLETION so it can exercise opal_progress. This probably isn't as critical for the modex step, but definitely necessary for the barrier at the end of mpi_init. The problem this creates is that the lazy macro exits as soon as "active" becomes false, and then we destruct the lock.
However, wakeup_thread sets "active" to false - and then calls the condition broadcast to wakeup any waiting threads. So there is a race condition between that broadcast and the lock destruct.
Add OPAL_ACQUIRE_OBJECT and OPAL_POST_OBJECT memory barriers to help protect against thread race conditions on some platforms
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Search external libevent library in both DIR/lib64 and DIR/lib
when --with-libevent=DIR is specified but --with-libevent-libdir=DIR is not
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Fix an apparent typo in external libevent configury
Require external libevent for install of separate libpmix
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
