http://www.open-mpi.org/community/lists/devel/2014/05/14822.php
Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root).
This commit was SVN r31916.
top_ompi_srcdir -> OMPI_TOP_SRCDIR
top_ompi_builddir -> OMPI_TOP_BUILDDIR
We also split the srcdir/builddir flags according to their local tree (e.g., OPAL_TOP_SRCDIR), and tied them all together in configure.ac. Renamed ompi_ignore and ompi_unignore to be opal_<foo> as these are agnostic markers.
Only thing left is ompilibdir being treated similar to what we dif for srcdir/builddir. Coming soon.
This commit was SVN r31678.
- This line, and those below, will be ignored--
M opal/mca/event/libevent2021/configure.m4
M opal/mca/hwloc/hwloc172/configure.m4
M configure.ac
M config/opal_setup_libltdl.m4
M config/opal_check_visibility.m4
M config/opal_setup_cc.m4
This commit was SVN r31637.
Nothing is generated in this file; this commit essentially just
renames ompi_config.h.in -> ompi_config.h.
cmr=v1.8.1:reviewer=dgoodell
This commit was SVN r31395.
To accompany r31092 and r310924, also ensure to create a new process
group in the child right after the orted forks. Add trivial configury
to ensure that we have setpgid, and only do the setpgid/getpgid if we
have setpgid.
Without this commit, killing the entire process group can do
unexpected things (e.g., kill the orted, mpirun, and even mpirun's
parent!).
cmr=v1.7.5:reviewer=rhc
This commit was SVN r31132.
The following SVN revision numbers were found above:
r31092 --> open-mpi/ompi@99c9ecaed0
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r310924
* Fixed the AC_ARG_ENABLE for the oshmem option.
* Fixed the AM_CONDITIONALs values for the projects.
* Re-added (and slightly simplified) the use of PROJECT_OSHMEM in
various Makefile.am's to disable building OSHMEM stuff
Submitted by Jeff, reviewed and approved by Ralph.
cmr=v1.7.5:reviewer=ompi-gk1.7
This commit was SVN r31062.
NOTE: I transferred the oshmem-disabled-by-default from the 1.7 branch to the trunk to minimize future disruption if/when we change that option.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31006.
- Move the ptrdiff_t tests up higher in configure.ac to be with the
rest of the type tests.
- Create new OMPI_FIND_MPI_AINT_COUNT_OFFSET for finding the
corresponding types of MPI_Aint, MPI_Count, and MPI_Offset.
Consolidate all the old C and Fortran tests into this new macro (and
.m4 file).
- Fix Fortran MPI_*_KIND tests that incorrectly keyed off assumed
types (e.g., int64_t) rather than whatever the corresponding C
MPI_Aint, MPI_Count, MPI_Offset types turned out to be.
- Add new logic to ensure that sizeof(MPI_Count) <= sizeof(size_t),
because our entire PML, BTL, and convertor infrastructure requires
this. As a side effect, just like MPI_Offset the same type of
MPI_Count (because MPI_Count has to be able to hold an MPI_Offset,
so we can't let MPI_Offset be larger than a MPI_Count).
This commit was SVN r30776.
The following Trac tickets were found above:
Ticket 4205 --> https://svn.open-mpi.org/trac/ompi/ticket/4205
fix the case, to enable oshmem-fortran when "with-shmem" was specified and "ompi-fortran" was enabled and happy.
fixed by Roman, reviewed by Miked
Refs trac:3763
This commit was SVN r30391.
The following Trac tickets were found above:
Ticket 3763 --> https://svn.open-mpi.org/trac/ompi/ticket/3763
The check to enable shmem fortran was too early, MPI can disable fortran but SHMEM fortran check was already done.
Refs trac:3763
This commit was SVN r30340.
The following Trac tickets were found above:
Ticket 3763 --> https://svn.open-mpi.org/trac/ompi/ticket/3763
weren't building the MPI C++ bindings because this causes "CXX=no" to
be passed to the mpicxx wrapper compiler.
Unfortunately, this optimization was brought to the v1.7 branch, and
therefore if you --disable-mpi-cxx on the v1.7 branch, the same
problem will happen. So this needs to be CMR'ed to v1.7 as well.
Submitted by Jeff, reviewed by Brian. RM approved by Brian.
Fixes trac:4120.
cmr=v1.7.4:reviewer=ompi-gk1.7:subject=Fix mpicxx wrapper compiler
This commit was SVN r30302.
The following Trac tickets were found above:
Ticket 4120 --> https://svn.open-mpi.org/trac/ompi/ticket/4120
* Fix some typos in macro names.
* Add case for OS's that have statfs() but no struct statfs (!).
* Add case for NetBSD with struct statvfs.f_fstypename.
Many thanks to Paul Hargrove who developed the majority of this patch.
Reviewed by Jeff Squyres.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30255.
As noted by Paul Hargrove, the #if's surrounding the use of statfs()
and statvfs() in opal/util/path.c have apparently gotten stale (e.g.,
modern flavors of *BSD OSs no longer define __BSD). Changes:
* Add statfs and statvfs to the AC_CHECK_FUNCS in configure.ac
* Add a sanity check to ensure that we have at least one of statfs()
or statvfs(). Add a similar sanity check in opal/util/path.c, just
as defensive programming.
* Use AC_CHECK_MEMBERS in configure.ac to check for specific struct
statfs/struct statvfs members that we use in opal/util/path.c
* In path.c, add some #includes as listed on the OS man page for
statfs(2) (OS X 10.8.5/Mountain Lion)
* The previous code used statvfs() on Solaris and statfs() everywhere
else. Attempting to replicate this with behavior-based configure
testing led to fairly complicted if/else logic, so the new code
uses whichever of the two are available (i.e., it might actually
use both -- OS X 10.8.5 and RHEL 6.5 have both statfs() and
statvfs()). The rationale here is that we don't really care which
of the two functions report the answer; we'll take the answer
regardless of where it comes from. For example, if one function
returns a failure and the other does not, we'll use the results
from the successful function and ignore the failed one.
This new code seems to work on OS X and Linux. We'll have to see what
happens with MTT and future Paul Hargrove testing...
cmr=v1.7.4:reviewer=ompi-rm1.7:subject=Make statfs/statvfs more robust
This commit was SVN r30198.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
more:
- Remove OPAL_ENABLE_MULTI_THREADS, since it didn't really do anything
correctly. Opal always has threads enabled at this point.
- Remove OMPI_ENABLE_PROGRESS_THREADS, since this hasn't worked in
8 years and it has performance issues we'll never be able to
overcome. Note that we have plans for re-adding async progress, using
a hybrid protocol of async and sync sends.
- OMPI_ENABLE_THREAD_MULTIPLE now determines whether the thread lock
macros do the check or not.
- Condition variables are ALWAYS polling right now, which fixes the thread
live-lock currently found when THREAD_MULTIPLE is turned on.
This commit was SVN r29891.
This is helpful in the work for #3694: ensure that many places that
eventually end up in configure don't overly-pollute the global shell
variable space (because debugging accidental shell variable pollution
can be a real pain).
Refs trac:3694
This commit was SVN r29830.
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
The chmod action statements need to be put in individual
AC_CONFIG_FILE statements that generate the target file in question.
With the original code, the 2 chmod statements were executed for
''each'' file in the AC_CONFIG_FILES block (resulting in both error
messages before the files were created, and needless chmods after the
files were created).
This commit was SVN r29829.
2. Oshmem examples moved to 'mpi' build target.
3. Oshmem examples renamed as 'shmem' => 'oshmem'.
4. Fixed warnings in oshmem_info.
Refs: 3763
This commit was SVN r29663.
unfortunately the debian packaging files should reside in the root folder
and cannot be placed under contrib/dist/... tree.
developed by Aleksey, reviewed by miked
cmr=v1.7.4:reviewer=ompi-gk1.7
This commit was SVN r29615.
The following common shared libraries did not have versioning:
* ompi/common/ofacm
* ompi/common/verbs
* ompi/common/ugni
Additionally, we still had shared library versions in VERSION for the
following libraries, which no longer exist:
* ompi/common/portals
* opal/common/hwloc
This commit was SVN r29421.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
Add support for MPI_Count type and MPI_COUNT datatype and add the required
MPI-3 functions MPI_Get_elements_x, MPI_Status_set_elements_x,
MPI_Type_get_extent_x, MPI_Type_get_true_extent_x, and MPI_Type_size_x.
This commit adds only the C bindings. Fortran bindins will be added in
another commit. For now the MPI_Count type is define to have the same size
as MPI_Offset. The type is required to be at least as large as MPI_Offset
and MPI_Aint. The type was initially intended to be a ssize_t (if it was
the same size as a long long) but there were issues compiling romio with
that definition (despite the inclusion of stddef.h).
I updated the datatype engine to use size_t instead of uint32_t to support
large datatypes. This will require some review to make sure that 1) the
changes are beneficial, 2) nothing was broken by the change (I doubt
anything was), and 3) there are no performance regressions due to this
change.
Increase the maximum number of predifined datatypes to support MPI_Count
Put common get_elements code to ompi/datatype/ompi_datatype_get_elements.c
Update MPI_Get_count to reflect changes in MPI-3 (return MPI_UNDEFINED when the count is too large for an int)
This commit was SVN r28932.
http://www.open-mpi.org/community/lists/users/2013/02/21356.php and a
helpful tip from Dave Goodell, set the precious variables for
compilers to "no" that we don't want. Libtool's m4 configry will
interpret this as "I won't be using this language; don't bother
setting it up."
This commit was SVN r28047.
flags, and mca flags are kept seperate until the very end. The main configure
wrapper flags should now be modified by using the OPAL_WRAPPER_FLAGS_ADD
macro. MCA components should either let <framework>_<component>_{LIBS,LDFLAGS}
be copied over OR set <framework>_<component>_WRAPPER_EXTRA_{LIBS,LDFLAGS}.
The situations in which WRAPPER CPPFLAGS can be set by MCA components was
made very small to match the one use case where it makes sense.
This commit was SVN r27950.
around OMPI_SETUP_MPI_FORTRAN in r27817 when removing the OPAL hacks for the
no-Fortran case. Then r27821 worked around a build issue caused by
r27817 in a sub-optimal way.
This commit was SVN r27826.
The following SVN revision numbers were found above:
r27817 --> open-mpi/ompi@fc3df11e08
r27821 --> open-mpi/ompi@0ede5be003
OMPI_WANT_FORTRAN_BINDINGS to 0 so that all the Fortran tests that
examine that variable have a numeric value to compare against.
This commit was SVN r27821.
actually care if opal_pointer_array is limited to handle_max already passes
that in as the max_size during init, so don't need it there. The arch
constant was a bit more difficult, so pass that in during MPI init and
leave empty otherwise.
This is to help with the effort to allow building ompi against an external
opal or orte.
This commit was SVN r27817.
to compile. With recent Autoconf versions, AC_CHECK_HEADERS only succeeds
if the header compiles, so need to check these two with sys/param.h
explicitly included in the search list...
This commit was SVN r27715.
* We always build OPAL, so always do the filesystem case-sensitivity
check
* Protect the extra ORTE/OMPI macros with "if we're building this
project..." tests
This commit was SVN r27699.
additional functionality. Rationale (refs trac:3422):
* Normal MPI applications only ever use the MPI API. Hence, -lmpi is
sufficient (they'll never directly call ORTE or OPAL
functions). This is arguably the most common case.
* That being said, we do have some test programs (e.g., those in
orte/test/mpi) that call MPI functions but also call ORTE/OPAL
functions. I've also written the occasional MPI test program that
calls opal_output, for example (there even might be a few tests in
the IBM test suite that directly call ORTE/OPAL functions).
* Even though this is not a common case, these applications should
also compile/link with mpicc.
* So we should add a --openmpi:linkall option that will also link
in whatever is necessary to call ORTE/OPAL functions
* Yes, we could hard-code "-lopen-rte -lopen-pal" in Makefiles, but
we do reserve the right to change those library names and/or add
others someday, so it's better to abstract out the names and let
the wrapper supply whatever is necessary.
* ORTE programs, however, are different. They almost always call OPAL
functions (e.g., if they want to send a message, they must use the
OPAL DSS). As such, it seems like the ORTE programs should always
link in OPAL.
Therefore:
* Add undocumented --openmpi:linkall flag to the wrapper compilers.
See the comment in opal_wrapper.c for an explanation of what it
does. This flag is only intended for Open MPI developers -- not
end users. That's why it's undocumented.
* Update orte/test/mpi/Makefile.am to add --openmpi:linkall
* Make ortecc/ortec++'s wrapper data text files always explicitly
link in libopen-pal
This commit was SVN r27670.
The following SVN revision numbers were found above:
r27668 --> open-mpi/ompi@cf845897aa
The following Trac tickets were found above:
Ticket 3422 --> https://svn.open-mpi.org/trac/ompi/ticket/3422
1. Restore libopen-pal.la, libopen-rte.la, and libmpi.la to be
separate entities (i.e., don't have libopen-rte.la include
libopen-pal.la, and don't have libmpi.la include libopen-pal.la).
Yay!
1. Consequently, make the wrapper compilers look for flags indicating
that the user wants to compile statically (currently: -static,
!--static, -Bstatic, and "-Wl," in front of all of those). If it
is, follow a 6-way matrix for determinining which libraries to
list on the underlying command line.
1. To support that, add the name of a token static and dynamic
library to look for in each of the wrapper compiler data files.
1. Fix a long-standing typo in the opalcc wrapper data file.
This commit was SVN r27662.
- fix the Fortran layer to use new macros to convert Fortran-to-C status
- change the C internals to pull out old OMPI_SET_STATUS* macros
Also, change name of "status" argument in topo_test_f.c to "topo_type".
This commit was SVN r27403.
particularly with respect to threading flags.
Before this change, the following scenario would fail (e.g., on Linux
with pthreads):
{{{
$ ./configure --disable-shared --enable-static ...
$ make clean install
$ cd examples
$ make clean all
}}}
Linking the Fortran examples would fail with missing pthread symbols.
This commit was SVN r26927.
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
either direct link to these basic predefined types, or a combination of them.
Anyway, the first items in the datatype list belong to OPAL, the second round
are MPI datatypes created by composing basic OPAL datatypes, and the last
batch are mapped datatype (direct correspondance between an OMPI datatype and
an OPAL one such as int -> int32_t).
Modify the op to fit this new scheme.
This commit was SVN r24247.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
* Update to be safe for AC 2.68 by using AC_LINK_IFELSE instead of
AC_TRY_LINK
* If enable visibility was used, ensure we fail if the compiler
doesn't support it
* Rename OMPI_CHECK_VISIBILITY -> OPAL_CHECK_VISIBILITY (and all
internal variables)
This commit was SVN r23923.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
operations, not ints.
Sorry for the mid-day configure.ac change, folks...
This commit was SVN r23449.
The following Trac tickets were found above:
Ticket 2472 --> https://svn.open-mpi.org/trac/ompi/ticket/2472
rename OMPI_CHECK_ATTRIBUTES -> OPAL_CHECK_ATTRIBUTES, because it's in
OPAL (somehow that name must have gotten missed in the Great M4 split
of '10...?)
This commit was SVN r23267.
got missed in r23189. It's part of the --with-libltdl changes.
This commit was SVN r23191.
The following SVN revision numbers were found above:
r23189 --> open-mpi/ompi@e597c4f9cd
supports a wide variety of operating systems and platforms; see the
opal/mca/paffinity/hwloc/hwloc/README file for details.
This component includes an embedded copy of hwloc, currently based on
hwloc-1.0rc6. But note that hwloc is properly SVN imported into the
/vendor branch, so it will be easy to update when 1.0 GA is released.
Note that the hwloc tree embedded in opal/mca/paffinity/hwloc/hwloc is
identical to a hwloc distribution tarball, except that much of the
documentation was rm -rf'ed (because we don't need it for the embedded
case).
Since the paffinity framework currently does not understand hardware
threads, the hwloc component compensates for this by identifying cores
by the "first" hardware thread on that core. Hopefully we'll update
paffinity someday to understand hardware threads. :-)
configure grew a --with-hwloc option, analogous to what we do for many
other external libraries that OMPI supports. However, there's a new
feature: due to the request of several distros, OMPI can be configured
to build with its internal copy of hwloc or with an external copy of
hwloc (e.g., a system-installed hwloc).
1. If --with-hwloc is not specified, Open MPI will try to use its
internal copy (but silently fail/ignore hwloc if that fails).
1. If --with-hwloc=<dir> is supplied, Open MPI looks for hwloc
support in <dir> (and --with-hwloc-libdir=<dir>, if specified).
1. If --with-hwloc=external is supplied, Open MPI will look for hwloc
in a compiler/linker default external location.
1. If --with-hwloc=internal is supplied, Open MPI will use its
internal copy of hwloc.
Some of OMPI's main configury had to be slightly re-arranged in the
bootstrapping phase to accomodate hwloc's configry needs.
This commit was SVN r23125.
Remove the --enable-progress-threads option as this is no longer functional, and hardcode OPAL_ENABLE_PROGRESS_THREADS to 0.
Replace the --enable-mpi-threads option with --enable-mpi-thread-multiple as this is clearer as to meaning. This option automatically turns "on" opal thread support if it wasn't already so specified. If the user specifies --disable-opal-multi-threads --enable-mpi-thread-multiple, we will error out with a message
Add a new --enable-opal-multi-threads option that turns "on" opal thread support without doing anything wrt mpi-thread-multiple
This commit was SVN r22841.
Note that each of these components will only be selected if specifically requested - otherwise, a "NULL" component will be used. The framework is only opened by the HNP and orteds, though neither is currently coded to save/restore state
This commit was SVN r22839.
If file does not exist, check the directory it lives in...
Maybe used by caller, trying to open mmap() on NFS, Lustre or
Panasas (thanks Sam).
For now, this is used to warn about the usage of mmap on such FS.
Please note, that Ralph mentioned the orte_no_session_dir parameter.
The help message includes a reference to this.
Tested on NFS and Lustre on Linux on
smoky: mpirun --mca orte_tmpdir_base $HOME/tmp -np 2 ./mpi_stub
jaguar: mpirun ... --mca orte_tmpdir_base /tmp/work/$USER ...
Fixes trac:1354
This should cmr:v1.5 once it has soaked and is shown to work on
Solaris
This commit was SVN r22604.
The following Trac tickets were found above:
Ticket 1354 --> https://svn.open-mpi.org/trac/ompi/ticket/1354
projects and don't push CPPFLAGS into WRAPPER_FLAGS (for now, removes
-D_REENTRANT).
refs trac:2201
This commit was SVN r22535.
The following Trac tickets were found above:
Ticket 2201 --> https://svn.open-mpi.org/trac/ompi/ticket/2201
use the new Automake "silent rules" if available.
If you are using an Automake prior to v1.11, you won't see the new
silent rules -- it will automatically default back to the "verbose"
rules.
Note, too, that even with these changes, you can enable the verbose
"make all" output in one of two ways:
1. Add "V=1" to your "make" command line
{{{
shell$ make all V=1
}}}
2. Add "--disable-silent-rules" to your "configure" command line:
{{{
shell$ ./configure --disable-silent-rules ...
}}}
The one down side of using the silent rules by default is that we'll
get less diagnostic information when users send their build logs. I
think we should update the web page to request that users send build
logs of "make V=1", but I'm guessing that not everyone will do it.
Note that I did ''not'' silent-ize the libltdl build (which is a dozen
or so files in the beginning of the build) because we wholly import
libltdl at autogen time. I therefore didn't want to patch libltdl
(further) after importing it a) to remain as forward- compatible as
possible, and b) patching the imported libltdl build system might be
tricky in terms of timestamps / dependencies. So those dozen-or-so
files will still be "verbose", but the rest of the files in OMPI will
be "silent".
This commit was SVN r22189.
Continue the reorganization of the configure system. Move files from the main config directory to their appropriate level-specific config directories. Modify the configure system to correctly handle compiler detection, test, and setup so that all things pertaining to opal and orte are done at the lower level, with the ompi configure system only looking at mpi-specific options.
Ensure the wrapper compilers for orte and ompi only get built when appropriate. Add support for c++ to the orte wrapper compilers, both script and non-script versions.
This commit was SVN r22138.
therefore the m4 test really belongs on orte/config. Thank Terry!
Additionally, I took the opprotunity to rename the variable so that
"TOTALVIEW" is not in the name anymore (because it applies to all
variables, not just Totalview).
This commit was SVN r22134.
and not hardcode /bin/true or /bin/false in the configure.ac
This updates the changes from r22113.
This commit was SVN r22130.
The following SVN revision numbers were found above:
r22113 --> open-mpi/ompi@214e26b539
Re-enable "./autogen.sh -no-ompi" again. If you -no-ompi, the entire OMPI
configury is skipped and the entire ompi/ subtree is not built. There's
some simple m4-isms that prune out the relevant parts.
I added ompi/config/, orte/config/, and opal/config/ directories. I moved a
bunch of m4 files from the top-level config/ dir into ompi/config/, and a few
into orte/config/.
Note that all 3 <project>/config directories have a config_files.m4 file. This
file contains the AC_CONFIG_FILES list for that project. The AC_CONFIG_FILES
call cannot be in an AC_DEFUN macro and conditionally called -- if it is
included at all, Autoconf will process it. Hence, these config_files.m4 files
don't AC_DEFUN -- they just have AC_CONFIG_FILES. m4_ifdef() is used to
conditionally include the files or not.
I moved a bunch of obvious OMPI-only m4 files from config/ to ompi/config/,
but I'm sure that there's more that could go. A ticket will be filed with
thoughts on future work in this area.
This commit was SVN r22113.
* No need for OPAL_SIZEOF_BOOL and OPAL_SIZEOF_INT in comm_inln.h --
just use sizeof()
* Fix logic in ompi_setup_cxx.m4 to account for the case where we
''do'' have a C++ compiler (duh!!)
* Fix spelling error in a shell variable that ended up making a
bad/empty #define
This should bring the trunk back to being functional. Sorry for the
interruption, folks...
This commit was SVN r21758.
The following SVN revision numbers were found above:
r21755 --> open-mpi/ompi@90d6491737
C++ compiler in configure. If we have a C++ compiler, then the MPI
C++ bindings are built by default. If we don't have a C++ compiler,
then the MPI C++ bindings are not built by default.
--enable-mpi-cxx will now force an error if there is no C++ compiler
available. --disable-mpi-cxx (or the lack of a C++ compiler) will now
disable many of the C++ compiler checks in configure.
Note that there are a few items to clean up regarding the difference
between C's _Bool type and C++'s bool type. Right now, we assume that
they are the same. But they aren't, and they shouldn't be treated as
such. This cleanup will be forced in MPI-2.2 with the introduction of
the MPI_C_BOOL MPI datatype.
This commit was SVN r21755.
