Retain the hetero-nodes flag for those cases where the user *knows* that there are differences and our automated system isn't good enough to see it.
Will obviously require further refinement as we find out which variances it can detect, and which it cannot.
We recognize that this means other users of OPAL will need to "wrap" the opal_process_name_t if they desire to abstract it in some fashion. This is regrettable, and we are looking at possible alternatives that might mitigate that requirement. Meantime, however, we have to put the needs of the OMPI community first, and are taking this step to restore hetero and SPARC support.
These two macros set the MCA prefix and MCA cmd line id,
respectively. Specifically, MCA parameters will be named
PREFIX<foo> in the environment, and the cmd line will use
-ID foo bar.
These macros must be called during configure.ac and a value
supplied. In the case of Open MPI, the values given are
PREFIX=OMPI_MCA_ and ID=mca.
Other projects (such as ORCM) will call these macros with
their own unique values. For example, ORCM uses PREFIX=ORCM_MCA_
and ID=omca
This scheme is necessary to allow running Open MPI applications under
systems that use their own versions of ORTE and OPAL. For example,
when running OMPI applications under ORCM, we need the MCA params passed
to the ORCM daemons to be separated from those recognized by the OMPI application.
When using the native aprun launcher, it was observed that
there were frequent memory corruption errors occuring either
during a PMI kvs-fence operation, or at mpi termation during
opal cleanup of allocated objects. This was especially bad
when using
aprun --c none
In some cases, the application would even just hang in finalize
if using ptmalloc, owing to some kind of infinite loop in
cleanup of small blocks, etc.
It turns out that the proble was in orte_ess_base_proc_binding's
improper use of opal_hwloc_base_get_available_cpus. The cpuset
(bitmap) returned from that function is not meant to be freed
by the caller.
This problem is likely never observed when using the mpirun launcher
as there's an early exit if the OMPI_MCA_orte_bound_at_launch
environment variable is set.
This commit was SVN r32809.
during RTE abort as that is happening in a thread, and (at least in some
environments) doesn't result in the main thread being immediately
terminated. Instead, we wind up going thru orte_finalize in the main
thread, which isn't what we want.
So replace the call to "exit" with the "quick exit" variant "_exit", which
causes the entire process to exit immediately.
(custom patch has been posted for 1.8.3)
This commit was SVN r32780.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
do not invoke orte_session_dir_finalize(...) so
orte_ess_base_app_abort(...) can successfully createi
<orte_process_info.proc_session_dir>/aborted
cmr=v1.8.2:reviewer=rhc
This commit was SVN r32498.
The following SVN revision numbers were found above:
r32460 --> open-mpi/ompi@abedb97be4
http://www.open-mpi.org/community/lists/devel/2014/05/14822.php
Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root).
This commit was SVN r31916.
grpcomm: fix memory leaks
We were leaking the caddy object used to pass data to the callback
function. This commit fixes these leaks.
oob,rml: fix memory leaks
This commit fixes several leaks:
- Both the oob/base and oob/tcp were leaking objects on their peer
hash tables. Iterate on the hash tables and free any objects.
- Leaked sent messages because of missing OBJ_RELEASE. I placed the
release in ORTE_RML_SEND_COMPLETE to catch all the possible
paths.
ess/base: close the state framework
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31776.
Fixes trac:4596
Reviewed by rhc, RM-approved
cmr=v1.8.2:reviewer=ompi-gk1.8
This commit was SVN r31626.
The following Trac tickets were found above:
Ticket 4596 --> https://svn.open-mpi.org/trac/ompi/ticket/4596
http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
This provides full locality - i.e., not just node-level, but all the way down to whatever common binding level exists between the procs.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31106.
Running orte-restart requires an initialized sstore.
This opens the sstore component for FT builds just like
the snapc component.
This commit was SVN r30796.
The function
int orte_snapc_base_select(bool seed, bool app);
wants to know if it called by an application or not. Therefore
it expects as second paremeter 'bool app'. It used to be
'!ORTE_PROC_IS_DAEMON' which is not always correct if it is
a tool or a HNP. This patch changes it to ORTE_PROC_IS_APP, which
has the correct information if it is an application.
This commit was SVN r30404.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
Thanks to Dave Love and Ashley Pittman for pointing out the problem.
cmr=v1.7.4:reviewer=jsquyres:subject=Fix tool communications with mpirun
This commit was SVN r29959.
The following Trac tickets were found above:
Ticket 3963 --> https://svn.open-mpi.org/trac/ompi/ticket/3963
includes various fixes all over the C/R code which are
hard to group like the other patches.
Changes from V1:
* explain why mca_base_component_distill_checkpoint_ready no longer works
* compare return result of opal functions with OPAL_* values
Changes from V2:
* use orte_rml_oob_ft_event() instead of referencing through the modules
* properly protect variable (thanks to --enable-picky)
This commit was SVN r29922.
