Reasoning: The old behavior was a little confusing. mca_base_components_open does not open an output stream so it is a little unexpected that mca_base_components_close does. To add to this several frameworks (that don't use mca_base_components_close) failed to close their output in the framework close function and others closed their output a second time. This change is an improvement to the symantics of mca_base_components_open/close as they are now symetric in their functionality.
This commit was SVN r27570.
pml/v:
- If vprotocol is not being used vprotocol_include_list is leaked. Assume vprotocol never takes ownership (see below) and always free the string.
coll/ml:
- (patch verified) calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
- Need to free mca_coll_ml_component.config_file_name on component close.
btl/openib:
- calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
vprotocol/base:
- There was no way for pml/v to determine if vprotocol took ownership of vprotocol_include_list. Fix by always never ownership (use strdup).
mca/base:
- param_lookup will result in storage->stringval to be a newly allocated string if the mca parameter has a string value. ensure this string is always freed.
cmr:v1.7
This commit was SVN r27569.
It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
Not sure what happened here, but the resulting trunk wouldn't even configure. After spending time fixing that problem, I found it wouldn't compile due to multiple syntax errors that had been introduced in both the OPAL and OMPI layer. This raised questions as to the completeness of the work.
Given that the author is departing, I pinged Jeff about it and we agreed to revert this for now. Hopefully, it can either be fixed by the author prior to actual departure, or someone else can pick it up (now that it is in the history) and fix it.
This commit was SVN r27511.
The following SVN revision numbers were found above:
r27508 --> open-mpi/ompi@12c3c743de
r27509 --> open-mpi/ompi@79e4a8ca38
r27510 --> open-mpi/ompi@1ad5ff625a
- fix the Fortran layer to use new macros to convert Fortran-to-C status
- change the C internals to pull out old OMPI_SET_STATUS* macros
Also, change name of "status" argument in topo_test_f.c to "topo_type".
This commit was SVN r27403.
it to a negative number). Get rid of the multiplication in the critical
path, and keep the functions as simple as possible.
This commit was SVN r26864.
Among other things, this patch deals with the following issues:
* fix ompi-checkpoint argument parsing
* ompi-restart -showme prints an extraneous "Restarted child with PID"
message. Move around the debug statement to avoid this.
* fixes for the state machine changes
This commit was SVN r26770.
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
together, so implement all functions in the MTL interface for all
MTLs. The only places NULL was still being set was for add_comm/del_comm,
and matched probe, both of which are straight forward to implement (or
return ERROR_NOT_IMPLEMENTED, since the PML can't emulate matched probe).
This commit was SVN r26194.
the ompi_message_t structure to properly initialize convertor (the peer
is available in the request in OB1, and wasn't needed when I did the
original implementation).
* Implement matched probe for the Portals4 MTL and add NULL function pointers
for the other MTLs.
* Add add_comm and del_comm functions to portals4 MTL so that direct call
almost works again.
* Add NEWS item that we've implemented matched probe
This commit was SVN r26180.
- MAJOR! get src descriptor leaks if mca_bml_base_send fails
- minor. descriptor leaked in mca_pml_send_request_start_copy if the btl returns OMPI_ERR_RESOURCE_BUSY.
This commit was SVN r26077.
Uses new CUDA IPC support. Also, a few minor changes in PML to take
advantage of it.
This code has no effect unless user asks for it explicitly via
configure arguments. Otherwise, it is either #ifdef'ed out or
not compiled.
This commit was SVN r26039.
supposed to. I.e., half-baked/not complete stuff.
This commit backs out all of r25545. Sorry folks!
This commit was SVN r25546.
The following SVN revision numbers were found above:
r25545 --> open-mpi/ompi@7f9ae11faf
to make MPI_IN_PLACE (and other sentinel Fortran constants) work on OS
X, we need to use the following compiler (linker) flag:
-Wl,-commons,use_dylibs
So if we're compiling on OS X, test to see if that flag works with the
compiler. If so, add it to the wrapper FFLAGS and FCFLAGS (note that
per a future update, we'll only have one Fortran compiler anyway).
Fixes trac:1982.
This commit was SVN r25545.
The following Trac tickets were found above:
Ticket 1982 --> https://svn.open-mpi.org/trac/ompi/ticket/1982
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
they only add the context id to the tag selection of the underlying
messaging meachinsm.
We would like to enable an MTL to maintain its own context data
per-communicator. This way an MTL will be able to queue incoming eager
messages and rendezvous requests per-communicator basis.
The MTL will be allowed to override comm->c_pml_comm member,
since it's unused in pml_cm anyway.
This commit was SVN r24858.
Instead of returning MPI_SUCCESS every time they are called regardless of the status of the call, they should return a value representative of the action. So similar to MPI_Wait/MPI_Test they will return MPI_SUCCESS if the action was successfull, or the value that matches status.MPI_ERROR for the operation if it is unsuccessful.
This was discussed on the [http://www.open-mpi.org/community/lists/devel/2011/03/9109.php ompi-devel list]
This commit was SVN r24551.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
as an argument to a macro which could result in it
being called twice. I did not observe any issues,
but it should be fixed. Also did some minor refactoring
for clarity and following code convention.
This commit was SVN r23886.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
Also, some other changes to bring the csum PML up
to date with changes that happened in ob1 over the
last two years. This includes a few bug
fixes and some minor refactoring.
This commit was SVN r23757.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
status structure or the _ucount field in the status structure.
On 64-bit sparc, the macros resolve into integer array assignments.
For all others, they are just simple assignments. This fixes
possible BUS errors seen when running on the SPARC processor.
This bug was introduced when the _count field changed from an int
into a size_t. See the changes to request.h for additional details.
This commit fixes trac:2514.
This commit was SVN r23554.
The following Trac tickets were found above:
Ticket 2514 --> https://svn.open-mpi.org/trac/ompi/ticket/2514
step is the configure and Fortran mojo that Jeff will put in. Until then I
guess the Fortran interface is broken (at least all functions using the hidden
count firld in the MPI_Status).
This commit was SVN r23467.
#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
allows the BTL to specify a specific ompi_proc_t that had an
error. Also add an optional descriptive string. Currently, arguments
are not used but will be by future failover PML.
Changes based on RFC. Reviewed by George Bosilca.
This commit was SVN r23174.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
ompi_ptr_t by translating into void*. Instead keep it as an ompi_ptr_t all
the way. Thanks to Timur Magomedov for helping to track down this issue and
test the patch.
cmr:v1.4
cmr:v1.5
This commit was SVN r23030.
1. fix a bug that caused an infinite loop in configure when specifying want-ft but not want-ft-thread by removing a stale reference to the opal-progress-thread option
2. add want-ft=orcm so we can build the orcm errmgr component
3. cleanup the use of "ompi_want_ft_xxx" and replace it with "opal_want_ft_xxx" so that naming conventions are preserved
This commit was SVN r22885.
Remove the --enable-progress-threads option as this is no longer functional, and hardcode OPAL_ENABLE_PROGRESS_THREADS to 0.
Replace the --enable-mpi-threads option with --enable-mpi-thread-multiple as this is clearer as to meaning. This option automatically turns "on" opal thread support if it wasn't already so specified. If the user specifies --disable-opal-multi-threads --enable-mpi-thread-multiple, we will error out with a message
Add a new --enable-opal-multi-threads option that turns "on" opal thread support without doing anything wrt mpi-thread-multiple
This commit was SVN r22841.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
