It never lived up to its purpose (and has caused amorphous indirect
errors such as https://github.com/open-mpi/ompi/issues/2519), so
delete it.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit dd20174532)
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/usnic and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Updated from master cherry pick: the OFI BTL does not exist on the
v4.0.x branch. Therefore, did not include the OFI BTL changes on
master in this cherry pick.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit f5e1a672cc)
Reset ptypes when cloning a datatype in order to prevent
a double free() in the opal_datatype_t destructor.
This fixes a bug introduced in open-mpi/ompi@7c938f070fFixesopen-mpi/ompi#6346
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@b395342c9f)
The issue was a little complicated due to the internal stack used in the
convertor. The main issue was that in the case where we run out of iov
space to save the raw description of the data while hanbdling a
repetition (loop), instead of saving the current position and bailing out
directly we reading of the next predefined type element. It worked in
most cases, except the one identified by the HDF5 test. However, the
biggest issue here was the drop in performance for all ensuing calls to
the convertor pack/unpack, as instead of handling contiguous loops as a
whole (and minimizing the number of memory copies) we copied data
description by data description.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
(back-ported from commit open-mpi/ompi@5a82c4fd07)
correctly handle the case in which iovec is full and the
last accessed element of the datatype is the beginning of a loop
Refs. open-mpi/ompi#6285
Thanks Axel Huebl for reporting this
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(back-ported from commit open-mpi/ompi@0832ab5acc)
correctly free ptypes if the datatype is not pre-defined.
Thanks Axel Huebl for reporting this.
Refs. open-mpi/ompi#6291
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit 7c938f070f)
opal_config_bottom.h can only be #include'd in opal_config.h,
so there is no need to #include "opal_config.h" inside.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit c8790d29de)
Some macros defined by the embedded hwloc ends up in opal_config.h
because hwloc configury m4 files are slurped into Open MPI. These
macros are not required here, and they might conflict with an external
hwloc install, so simply #undef them in hwloc/external/external.h
after including <opal_config.h> but before including the external
<hwloc.h>.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit f22b7d4f46)
Update the OPAL glue configure code to correctly link the opal/pmix3
component to the hwloc used by OMPI instead of defaulting to the
system-level hwloc. Required a corresponding update to the PMIx hwloc
configure code so we treat hwloc the same way we handle libevent in
embedded scenarios. Roll to PMIx v3.1.2 for plugging of memory leaks and
addition of faster PMIx_Get response
Signed-off-by: Ralph Castain <rhc@pmix.org>
This commit fixes a bug where add_procs can incorrectly return an
error when going through the dynamic add_procs path. This doesn't
happen normally, only when pml/ob1 is not in use.
References #6201
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 30b8336cb4)
The PMIX_MODEX and PMIX_INFO_ARRAY macros were removed from the PMIx 3.1 standard.
Open MPI does not really need them (they are only used to be reported as not supported),
so smply #ifdef protect them to support an external PMIx v3.1
The change only need to be done in ext3x/ext3x.c.
But since this file is automatically generated from pmix3x/pmix3x.c, we have to update
the latter file.
Refs. open-mpi/ompi#6247
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(back-ported from commit open-mpi/ompi@950ba16aa1)
remove whitespace around '=' when setting btl_uct_LIBS
Thanks Ake Sandgren for reporting this
Refs. open-mpi/ompi#6173
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@b89deeb1bb)
Use the PRIsize_t macro to correctly print a size_t
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@78aa6fdd1d)
AC_CHECK_DECLS take a comma separated list of macros/symbols,
so replace the whitespace separator with a comma.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@b715dd2657)
Use PMIX_* macros instead of OPAL_* macros
master does things differently, so this is a one-off commit
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Though not a recommended configuration it is possible to use Open MPI
over UCX over uGNI. This configuration had some issues related to the
connection management and tl selection. This commit fixes those
issues.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit e07a64c52d)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
AC_CHECK_DECLS take a comma separated list of macros/symbols,
so replace the whitespace separator with a comma.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit b715dd2657)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Needed to properly read PMIx job data like the following
- `OPAL_PMIX_LOCALLDR`
- `OPAL_PMIX_RANK`
- `OPAL_PMIX_GLOBAL_RANK`
- `OPAL_PMIX_APPLDR`
- `OPAL_PMIX_APP_RANK`
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
(cherry picked from commit a557c4130c)
It seems in some cases (gcc older than v6.0.0) the __atomic_thread_fence is a
no-op with __ATOMIC_ACQUIRE. This appears to be the case with X86_64 so go
ahead and use __ATOMIC_SEQ_CST for the x86_64 read memory barrier. This should
not cause any performance issues as it is equivalent to the memory barrier
in the hand-written atomics.
References #6014
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 30119ee339)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Under certain circumstances, ibv_exp_query_device was
returning an error due to uninitialized fields in the
extended attributes struct.
Fixes: #5810Fixes: #5914
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
(cherry picked from commit 8126779a35)
Only default to the external component if its version is
greater or equal than the internal libevent (2.0.22)
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit b205039205)
- Always use the external component when configure'd with --with-libevent=external
- Fix the external libevent library version detection
by testing _EVENT_NUMERIC_VERSION and EVENT__NUMERIC_VERSION macros
- Use the event2/event.h header (event.h is deprecated since libevent 2.0
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit 35e77a286c)
This commit fixes a deadlock that can occur when using a TL that
supports the connect to endpoint model. The deadlock was occurring
while processing an incoming connection requests. This was done from
an active-message callback. For some unknown reason (at this time)
this callback was sometimes hanging. To avoid the issue the connection
active-message is saved for later processing.
At the same time I cleaned up the connection code to eliminate
duplicate messages when possible.
This commit also fixes some bugs in the active-message send path:
- Correctly set all fragment fields in prepare_src.
- Fix bug when using buffered-send. We were not reading the return
code correctly (which is in bytes). This resulted in a message
getting sent multiple times.
- Don't try to progress sends from the btl_send function when in an
active-message callback. It could lead to deep recursion and an
eventual crash if we get a trace like
send->progress->am_complete->ob1_callback->send->am_complete...
Closes#5820Closes#5821
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 707d35deeb)
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
There was a race condition in opal_free_list_get. Code throughout the
Open MPI codebase was assuming that a NULL return from this function
was due to an out-of-memory condition. In some cases this can lead to
a fatal condition (MPI_Irecv and MPI_Isend in pml/ob1 for
example). Before this commit opal_free_list_get_mt looked like this:
```c
static inline opal_free_list_item_t *opal_free_list_get_mt (opal_free_list_t *flist)
{
opal_free_list_item_t *item =
(opal_free_list_item_t*) opal_lifo_pop_atomic (&flist->super);
if (OPAL_UNLIKELY(NULL == item)) {
opal_mutex_lock (&flist->fl_lock);
opal_free_list_grow_st (flist, flist->fl_num_per_alloc);
opal_mutex_unlock (&flist->fl_lock);
item = (opal_free_list_item_t *) opal_lifo_pop_atomic (&flist->super);
}
return item;
}
```
The problem is in a multithreaded environment is *is* possible for the
free list to be grown successfully but the thread calling
opal_free_list_get_mt to be left without an item. The happens if
between the calls to opal_lifo_push_atomic in opal_free_list_grow_st
and the call to opal_lifo_pop_atomic other threads pop all the items
added to the free list.
This commit fixes the issue by ensuring the thread that successfully
grew the free list **always** gets a free list item.
Fixes#2921
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 5c770a7bec)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
It is apparently possible for different instances of the same UCT
transport to have different limits (max short put for example). To
account for this we need to store the attributes per TL context not
per TL. This commit fixes the issue.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 6ed68da870)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit updates the uct btl to change the transports parameter
into a priority list. The dc_mlx5, rc_mlx5, and ud transports to the
priority list. This will give better out of the box performance for
multi-threaded codes beacuse the *_mlx5 transports can avoid the mlx5
lock inside libmlx5_rdmav2.
This commit also fixes a number of leaks and a possible deadlock when
using RDMA.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 39be6ec15c)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Ignore with-hwloc=internal or external as those are meaningless to pmix
(will upstream)
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit c498a7e77a)
If we are using the internal PMIx component and the embedded library fails to configure, then fail - don't silently fail to build and then fail in execution
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit f379ba9c8e)
