about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
This commit also cleans up the checkpoint and terminate case making it more
precise than before. Previously the application could make a small amount of
progress between checkpoint completion and application termination. Now the
application will make no progress at all in this time span.
Additional minor change:
- Start using OPAL_INT_TO_BOOL instead of if/else logic
This commit was SVN r16952.
methods (in order of precedence):
1. #pragma ident <ident string> (e.g., Intel and Sun)
1. #ident <ident string> (e.g., GCC)
1. static const char ident[] = <ident string> (all others)
By default, the ident string used is the standard Open MPI version string. Only
the following libraries will get the embedded version strings (e.g., DSOs will
not):
* libmpi.so
* libmpi_cxx.so
* libmpi_f77.so
* libopen-pal.so
* libopen-rte.so
* Added two new configure options:
* `--with-package-name="STRING"` (defaults to "Open MPI username@hostname
Distribution"). `STRING` is displayed by `ompi_info` next to the "Package"
heading.
* `--with-ident-string="STRING"` (defaults to the standard Open MPI version
string - e.g., X.Y.Zr######). `%VERSION%` will expand to the Open MPI
version string if it is supplied to this configure option.
This commit was SVN r16644.
has his own range which is defined by a min value and a range. By default
there is no limitation on the port range, which is exactly the same
behavior as before.
This commit was SVN r16584.
If we cannot resolve the route to the peer that we're trying to send
to, don't queue up the message in the TCP OOB -- instead, return it to
the upper layer (e.g., the RML) and let it decide what to do.
In the case of the routed RML, the tree component will queue it up for
later transmission. Hence, we don't want the message queued up both
here in the TCP OOB and the tree routed. Also see some more
discussion / explanation in #1171.
This commit was SVN r16540.
The following SVN revision numbers were found above:
r16513 --> open-mpi/ompi@7ae9589d70
The following Trac tickets were found above:
Ticket 1170 --> https://svn.open-mpi.org/trac/ompi/ticket/1170
Note that this means ALL procs in the parent job are updated, even though they may not be participating in the comm_spawn. This doesn't really hurt anything - just unnecessary.
Comm_spawn still has a problem when a child process shares a node with a parent, so this doesn't fix everything. It only fixes the bug of ensuring all procs know how to talk to each other.
This commit was SVN r16460.
This commit introduces the necessary logic to avoid that conflict. If a PLS component can identify that a daemon has failed, then we will set a flag indicating that fact. The xcast system will subsequently check that flag and, if it is set, will send all messages direct to the recipient. In the case of "kill local procs" and "terminate", the messages will go directly to each orted, thus bypassing any orted that has failed.
In addition, the xcast system will -not- wait for the messages to complete, but will return immediately (i.e., operate in non-blocking mode). Orterun will wait (via an event timer) for a period of time based on the number of daemons in the system to allow the messages to attempt to be delivered - at the end of that time, orterun will simply exit, alerting the user to the problem and -strongly- recommending they run orte-clean.
I could only test this on slurm for the case where all daemons unexpectedly died - srun apparently only executes its waitpid callback when all launched functions terminate. I have asked that Jeff integrate this capability into the OOB as he is working on it so that we execute it whenever a socket to an orted is unexpectedly closed. Meantime, the functionality will rarely get called, but at least the logic is available for anyone whose environment can support it.
This commit was SVN r16451.
variable is not defined. Make sure to set it to something reasonable
so that file preloading still works (instead of seg faulting :)
Thanks to Hiep Bui Hoang for reporting this bug.
This commit was SVN r16433.
For example, if I have an application that, internal to the application, takes
the argument '-mca foo bar' we do not want orterun to pick up this argument and
pass it through the system.
So the following
{{{
shell$ mpirun -np 2 -mca btl tcp,self ./myapp -mca foo bar
}}}
orterun should pick up {{{-mca btl tcp,self}}} but not {{{-mca foo bar}}} which
it was previous to this commit.
I tested command line runs and runs with app files to confirm this patch works.
This commit was SVN r16431.
1. taking advantage of the fact that we no longer create the launch message via a GPR trigger. In earlier times, we had the GPR create the launch message based on a subscription. In that mode of operation, we could not guarantee the order in which the data was stored in the message - hence, we had no choice but to parse the message in a loop that checked each value against a list of possible "keys" until the corresponding value was found.
Now, however, we construct the message "by hand", so we know precisely what data is in each location in the message. Thus, we no longer need to send the character string "keys" for each data value any more. This represents a rather large savings in the message size - to give you an example, we typically would use a 30-char "key" for a 2-byte data value. As you can see, the overhead can become very large.
2. sending node-specific data only once. Again, because we used to construct the message via subscriptions that were done on a per-proc basis, the data for each node (e.g., the daemon's name, whether or not the node was oversubscribed) would be included in the data for each proc. Thus, the node-specific data was repeated for every proc.
Now that we construct the message "by hand", there is no reason to do this any more. Instead, we can insert the data for a specific node only once, and then provide the per-proc data for that node. We therefore not only save all that extra data in the message, but we also only need to parse the per-node data once.
The savings become significant at scale. Here is a comparison between the revised trunk and the trunk prior to this commit (all data was taken on odin, using openib, 64 nodes, unity message routing, tested with application consisting of mpi_init/mpi_barrier/mpi_finalize, all execution times given in seconds, all launch message sizes in bytes):
Per-node scaling, taken at 1ppn:
#nodes original trunk revised trunk
time size time size
1 0.10 819 0.09 564
2 0.14 1070 0.14 677
3 0.15 1321 0.14 790
4 0.15 1572 0.15 903
8 0.17 2576 0.20 1355
16 0.25 4584 0.21 2259
32 0.28 8600 0.27 4067
64 0.50 16632 0.39 7683
Per-proc scaling, taken at 64 nodes
ppn original trunk revised trunk
time size time size
1 0.50 16669 0.40 7720
2 0.55 32733 0.54 11048
3 0.87 48797 0.81 14376
4 1.0 64861 0.85 17704
Condensing those numbers, it appears we gained:
per-node message size: 251 bytes/node -> 113 bytes/node
per-proc message size: 251 bytes/proc -> 52 bytes/proc
per-job message size: 568 bytes/job -> 399 bytes/job
(job-specific data such as jobid, override oversubscribe flag, total #procs in job, total slots allocated)
The fact that the two pre-commit trunk numbers are the same confirms the fact that each proc was containing the node data as well. It isn't quite the 10x message reduction I had hoped to get, but it is significant and gives much better scaling.
Note that the timing info was, as usual, pretty chaotic - the numbers cited here were typical across several runs taken after the initial one to avoid NFS file positioning influences.
Also note that this commit removes the orte_process_info.vpid_start field and the handful of places that passed that useless value. By definition, all jobs start at vpid=0, so all we were doing is passing "0" around. In fact, many places simply hardwired it to "0" anyway rather than deal with it.
This commit was SVN r16428.
1. --with-sge, always builds
2. --without-sge, never builds
3. if neither is specified, build if and only if either SGE_ROOT is set or "qrsh" is found in the path
This commit was SVN r16422.
This patch also fixes a minor bug discovered along the way: we had "lost" the passing of the oversubscribed condition flag from the mapper to the orteds. Thus, we were not setting sched_yield correctly when in oversubscribed conditions (except when a hostfile was specified - different logic there because we treat the number of slots allocated on the node as "uncertain")
I did not modify the process component in this patch - I will send a proposed patch to the maintainers of that component so they can review it first.
This commit was SVN r16418.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
necessary (it already uses blocking semantics while waiting for events
on fd's, so it's not taking more cycles from MPI applications than
necessary), or this can/will cause lengthy delays in orted processing.
The problem we most recently saw was with routed OOB messages getting
significantly delayed before being delivered to the target MPI
processes. This was problematic for BTLs that use OOB messaging for
wireup. There is a lengthy comment in orted_main.c that describes
this in more detail.
Setting the orted to not voluntarily call yield() prevents this bad
behavior. The orted only runs in small bursts anyway (and blocks the
rest of the time), so this is not harmful to application performance.
This commit was SVN r16365.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
working with Automake 1.10. This is a new hack, which should be much
more flexible. The ras doesn't contain any Objective C, so remove the
hack entirely from that Makefile.am.
This commit was SVN r16269.
(Someday I'll learn to do this before committing)
This commit was SVN r16260.
The following SVN revision numbers were found above:
r16252 --> open-mpi/ompi@e10f476c87
and implementation. This has shown drastic performance benefit when
transferring Many files at roughly the same time.
I tested this for many different filem operations and everything was working
fine. Let me know if you have any problems with this functionality.
Some Notes:
- opal-checkpoint now has a 'quiet' flag to keep it from being too verbose.
- FileM RSH component is fully non-blocking.
- FileM RSH component has incomming connection throttling since by default
ssh only allows 10 concurrent scp connections to any single host. This
default can be adjusted via an MCA parameter.
{{{-mca filem_rsh_max_incomming 10}}}
- There is an MCA parameter for max outgoing connections, but it is currently
not implemented. If someone needs it then it should not be hard to implement.
{{{-mca filem_rsh_max_outgoing 10}}}
- Changed the FileM request structure so that it is a bit more explicit and
flexible.
- Moved the 'preload-binary' and 'preload-files' functionality into odls/base
allowing for code reuse in the 'process' and 'default' ODLS components.
- Fixed a bug in the process name resolution which broke the 'preload-*'
functionality due to GPR table structure changes.
- The FileM RSH component might be able to see even more speedup from using a
thread pool to operate on the work_pool structures, but that is for future
work.
- Added a 'opal-show-help' file to ODLS Base
This commit was SVN r16252.
performance characterization, and should not be used by anyone doing anything
else since it will not produce a globally consistent checkpoint in this mode.
This commit was SVN r16192.
2. Remove some unnecessary code that was causing a SEGV.
There may be some more work to be done, but at least orte-clean is functional again.
This commit was SVN r16111.
It is masking a bug that I'm tracking down in the SNAPC FULL - FILEM interations
Also make sure to cleanout the filem structure before asking for another
checkpoint file when not storing the files in place.
This commit was SVN r16109.
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
Tie stdin to /dev/null to prevent stdin from being closed and thus making stdin not work in slurm allocations.
This commit was SVN r15892.
The following Trac tickets were found above:
Ticket 1047 --> https://svn.open-mpi.org/trac/ompi/ticket/1047
needs to override the default umask. By default, this is not used
since most environments do what the user would expect without any
help.
* Have TM use the newly added umask hook, so that processes inherit
the user's umask from mpirun rather than the pbs_mom's umask, which
the user has no control over.
This commit was SVN r15858.
Application Level Placement Scheduler (ALPS).
This commit was tested under two Cray machines at ORNL: Jaguar (Catamount)
and Rizzo (CNL Test cage). Both machines performed as they should across
the commit.
It is likely that mor changes will follow this the work and environment
stabilizes.
Most of the infrastructure works the same for Catamount and CNL
except for a few bits. Below are the highlights:
Default IFACE Change:
On Catamount we can use PTL_IFACE_DEFAULT, but on the CNL system we have access
to will fail on this interface, and should be set to:
IFACE_FROM_BRIDGE_AND_NALID(PTL_BRIDGE_UK,PTL_IFACE_SS).
So if we detect that we are running with YOD then use the former interface
and if we detect that we are running with ALPS then use the latter.
We will want to pursue a more elegant solution if this interface continues to
change across machines.
PtlGetId and cnos_register_ptlid:
The header suggests that these should never be called when launching with YOD.
But in the ALPS environment the cnos_barrier() will hang forever if these
functions are not called after PtlNIInit(). Since these functions only need to
be called once, and the orte rmgr/cnos component is loaded before the ompi
common/portals componet then just call these functions once in the rmgr/cnos
component.
cnos_barrier_init():
This is a noop for YOD, but critical for ALPS. So be sure to call it before
calling the first barrier in the rmgr/cnos component.
cnos_barrier vs cnos_pm_barrier:
It is suggested the cnos_pm_barrier only be used during finalization
as it will indicate to the launcher (yod or aprun) that the app is about
to complete. It was suggested that we use the regular cnos_barrier() instead.
I want to look into this a bit more to make sure there are not adverse
side effects. A note has been placed in the code to indicate this reasoning.
This commit was SVN r15756.
from orte_ns.compare_fields(), not 0 (yes, they're the same [today],
but it is much better to check for symbolic names...).
This commit was SVN r15731.
to light: we weren't ack'ing properly for streams that originated (or
originated via proxy) and terminated within the HNP. This commit
fixes that.
It also fixes a few style issues, and added some more opal_outputs for
debugging. Also, fixed a bug where the fact that we forwarded (and
therefore might need to update the ack) was not correctly reported if
there were multiple forwards (which there are not as the system is
currently using IOF, but there could be).
Refs trac:1098 -- want to get another pair of eyes to look at this before
I close the ticket.
This commit was SVN r15730.
The following Trac tickets were found above:
Ticket 1098 --> https://svn.open-mpi.org/trac/ompi/ticket/1098
int to void. This function call exit at the end, so there is no way to
return from there. Apply the same thing to the errmsg_abort function and
update all components.
This commit was SVN r15704.
- If one wants to use this solution, remember to unload the project 'orte-restart' which is currently not working for Windows.
This commit was SVN r15680.
grpcomm cnos component
- Remove the .ompi_ignore
- add a configure.m4 that should keep it from building on any system
other than Cray XT* (copied from rml/cnos)
- Fix some mis-named symbols resulting from cut/paste errors.
This patch brings the Cray build back into 'working' order.
This commit was SVN r15651.
