This commit was SVN r30605.
The following SVN revision numbers were found above:
r30600 --> open-mpi/ompi@7d2c4cb468
r30602 --> open-mpi/ompi@9e751a0302
r30604 --> open-mpi/ompi@3012c280cf
Revision number ranges (suitable for "git log"):
r30602-30604 --> open-mpi/ompi@9e751a03^..3012c280
them, but it's going to take a little time (at least one day). So
Nathan says it's ok to .ompi_ignore coll ml until he's able to fix it.
This commit was SVN r30600.
Several changes are contained in this commit:
- Clean up tabs and trailing whitespaces
- Use consistent indentation in changed files
- Remove unused code. None of the removed code will ever have been
used in a trunk build.
- Clean up the smcm code quite a bit
- Do not fflush stderr and use opal_output instead of fprintf.
These changes have been tested on Cray XE-6 and PSM systems.
cmr=v1.7.5:ticket=trac:4158
This commit was SVN r30533.
The following Trac tickets were found above:
Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
This commit fixes one warning that should have caused coll/ml to segfault
on reduce. The fix should be correct but we will continue to investigate.
cmr=v1.7.5:ticket=trac:4158
This commit was SVN r30477.
The following Trac tickets were found above:
Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
After IM with Nathan, apply patch from ticket after verification by Paul Hargrove that it fixes the problem on non-x86 32-bit platforms
Verified by Paul, RM-approved
cmr=v1.7.4:reviewer=ompi-gk1.7
This commit was SVN r30411.
The following Trac tickets were found above:
Ticket 4143 --> https://svn.open-mpi.org/trac/ompi/ticket/4143
allgather.
The new collectives provide a signifigant performance increase over tuned for
small and medium messages. We are initially setting the priority lower than
tuned until this has had some time to soak in the trunk. Please set
coll_ml_priority to 90 for MTT runs.
Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL),
and Nathan Hjelm (LANL).
Commit details (for reference):
Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather.
We need to take the basesmuma header into account when calculating the
ptpcoll small message thresholds. Add a define to bcol.h indicating the
maximum header size so we can take the header into account while not
making ptpcoll dependent on information from basesmuma.
This resolves an issue with allreduce where ptpcoll overwrites the
header of the next buffer in the basesmuma bank.
Fix reduce and make a sequential collective launcher in coll_ml_inlines.h
The root calculation for reduce was wrong for any root != 0. There are
four possibilities for the root:
- The root is not the current process but is in the current hierarchy. In
this case the root is the index of the global root as specified in the
root vector.
- The root is not the current process and is not in the next level of the
hierarchy. In this case 0 must be the local root since this process will
never communicate with the real root.
- The root is not the current process but will be in next level of the
hierarchy. In this case the current process must be the root.
- I am the root. The root is my index.
Tested with IMB which rotates the root on every call to MPI_Reduce. Consider
IMB the reproducer for the issue this commit solves.
Make the bcast algorithm decision an enumerated variable
Resolve various asset failures when destructing coll ml requests.
Two issues:
- Always reset the request to be invalid before returning it to the
free list. This will avoid an asset in ompi_request_t's destructor.
OMPI_REQUEST_FINI does this (and also releases the fortran handle
index).
- Never explicitly construct or destruct the superclass of an opal
object. This screws up the class function tables and will cause
either an assert failure or a segmentation fault when destructing
coll ml requests.
Cleanup allgather.
I removed the duplicate non-blocking and blocking functions and modeled
the cleanup after what I found in allreduce. Also cleaned up the code
somewhat.
Don't bother copying from the send to the recieve buffer in
bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the
same.
The eliminates a warning about memcpy and aliasing and avoids an
unnecessary call to memcpy.
Alwasy call CHECK_AND_RELEASE on memsync collectives.
There was a call to OBJ_RELEASE on the collective communicator but
because CHECK_AND_RECYLCE was never called there was not matching call
to OBJ_RELEASE. This caused coll ml to leak communicators.
Make allreduce use the sequential collective launcher in coll_ml_inlines.h
Just launch the next collective in the component progress.
I am a little unsure about this patch. There appears to be some sort
of race between collectives that causes buffer exhaustion in some cases
(IMB Allreduce is a reproducer). Changing progress to only launch the
next bcol seems to resolve the issue but might not be the best fix.
Note that I see little-no performance penalty for this change.
Fix allreduce when there are extra sources.
There was an issue with the buffer offset calculation when there are
extra sources. In the case of extra sources == 1 the offset was set
to buffer_size (just past the header of the next buffer). I adjusted
the buffer size to take into accoun the maximum header size (see the
earlier commit that added this) and simplified the offset calculation.
Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup
to work correctly.
This has been tested with various layouts using the ibm testsuite and
imb and appears to have the same performance as the old blocking version.
Fix allgather for non-contiguous layouts and simplify parsing the
topology.
Some things in this patch:
- There were several comments to the effect that level 0 of the
hierarchy MUST contain all of the ranks. At least one function
made this assumption but it was not true. I changed the sbgp
components and the coll ml initization code to enforce this
requirement.
- Ensure that hierarchy level 0 has the ranks in the correct
scatter gather order. This removes the need for a separate
sort list and fixes the offset calculation for allgather.
- There were several passes over the hierarchy to determine
properties of the hierarchy. I eliminated these extra passes
and the memory allocation associated with them and calculate the
tree properties on the fly. The same DFS recursion also handles
the re-order of level 0.
All these changes have been verified with MPI_Allreduce, MPI_Reduce, and
MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests.
coll/ml: correct pointer usage for MPI_BOTTOM
Since contiguous datatypes are copied via memcpy (bypassing the convertor) we
need to adjust for the lb of the datatype. This corrects problems found testing
code that uses MPI_BOTTOM (NULL) as the send pointer.
Add fallback collectives for allreduce and reduce.
cmr=v1.7.5:reviewer=pasha
This commit was SVN r30363.
Adds coll_hcoll_np mca parameter similar to that of fca component (defaults to 32). Those who use hcoll be aware that from now on the communicators less than 32 procs will run w/o hcoll by default. - Resolves fallback issue in case libhcoll runs out of allowed contexts. The solution is moving hcoll_context_create from comm_enable to comm_query. Shortly, comm_enable should never return OMPI_ERROR in the coll component with highest priority (hcoll). Otherwise the ompi coll_base_select will unselect the coll funtion pointers and module references leaving the communicator w/o coll pointer. This will cause the fail. Same behavior can be reproduced even with tuned if one would hardcore some "return OMPI_ERROR" into it's module_enable funtion. - Additionally, removed all the dead code under #if 0; removed unused variables (path for library, active_modules list) and classes (module list wrapper)
Fixed by Val, Reviewed by Devendar/Josh/Miked
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30341.
Set comm attribute with keyval.
Wait for pending hcoll module tasks in comm delete callback where PML
still valid on the communicator. safely destroy hcoll context during
hcoll module destructor.
Author: Devendar Bureddy
reviewed by miked
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30175.
- HCOLL close without init
- Call hcoll progress after comm finalize
- mpirun default for coll_hcoll_enable is 1
fixed by Igor, reviewed by miked
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30156.
configury/Makefile.am changes; this commit renames the internal
installdirs.h framework struct field names to match the configry macro
names:
* pkgdatdir -> ompidatadir
* pkglibdir -> ompilibdir
* pkgincludedir -> ompiincludedir
This commit was SVN r30145.
The following SVN revision numbers were found above:
r30140 --> open-mpi/ompi@8b778903d8
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
- Modifications to coll/hcoll component related to the changes in the libhcoll API.
Now, hcoll_destroy_context accepts one more parameter that indicates if the context was
really destroyed as a result of the call.
This new "non-blocking" context destruction fixes hang discovered in IMB with mcast enabled.
- Clean up all the left contexts (if any) on the comm_world destruction.
fixed by Val, reviewed by miked
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30055.
(aka the root). This commit is based on a patch provided by Pierre
Jolivet.
Fix all the output to match the failing MPI call.
This commit was SVN r29761.
To support the new mpool two changes were made to the mpool infrastructure:
1) Added an mpool flag to indicate that an mpool does not need the memory
hooks to use the leave pinned protocols. This flag is checked in the
mpool lookup.
2) Add a mpool context to the base registration. This new member is used
by the udreg mpool to store the udreg context associated with the
particular registration. The new member will not break the ABI
compatibility as the new member is only currently used by the udreg
mpool.
Dynamics support for Cray systems makes use of the global rank provided by
orte to give the ugni library a unique rank for each process. Dynamics
support is not available under direct-launch (srun.)
cmr=v1.7.4
This commit was SVN r29719.
Only use Portals on communicators with more than one rank
Fix computation of number of children when using the hypercube tree
This commit was SVN r29616.
and tuned to correctly handle 0 recvcounts.
Tested with the reproducer from #1550.
Refs trac:1559
This commit was SVN r29542.
The following Trac tickets were found above:
Ticket 1559 --> https://svn.open-mpi.org/trac/ompi/ticket/1559
The algorithms are intended for MPI-3.0 compliance and are not
optimized. We should aim to add better algorithms in the future through
cheetah.
MPI_Iallreduce and MPI_Igatherv on intercommunicators are required for
MPI_Comm_idup support.
cmr=v1.7.4:reviewer=brbarret:ticket=trac:2715
This commit was SVN r29333.
The following Trac tickets were found above:
Ticket 2715 --> https://svn.open-mpi.org/trac/ompi/ticket/2715
1. Change in rte api implementation: now comm_world used to do p2p.
This allows to not worry about other comms being destroyed.
2. added a notification mechanism with a help of which runtime can say libhcoll that RTE api can not be used any longer.
pass a pointer to a flag, and its size to libhcoll.
The flag changes when the RTE is no longer available.
Currently this flag is just ompi_mpi_finalized global bool value.
cmr=v1.7.3:reviewer=jladd
This commit was SVN r29331.
Blocking versions are simple linear algorithms implemented in coll/basic. Non-
blocking versions are from libnbc 1.1.1. All algorithms have been tested with
simple test cases.
cmr=v1.7.4:reviewer=jsquyres
This commit was SVN r29265.
of MPI_Alltoall.
- add support for MPI_IN_PLACE in the self collective component.
- fix the extent usage in the tuned collective component.
- correctly use the peer counts instead of local - add support for MPI_IN_PLACE in the self collective component.
- fix the extent usage in the tuned collective component.
- correctly use the peer counts instead of local.
Thanks to Fujitsu for the patch.
This commit was SVN r29187.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
option to autodetect whether fragmentation should be enabled
cmr=v1.7.3:ticket=trac:3717
This commit was SVN r29065.
The following Trac tickets were found above:
Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
Working on faster algorithms for tuned that will come at a later time.
cmr=v1.7.3:ticket=trac:2965
This commit was SVN r28952.
The following Trac tickets were found above:
Ticket 2965 --> https://svn.open-mpi.org/trac/ompi/ticket/2965
many builds. I am temporarily .ompi_ignore'ing this component until
it can be fixed by its owner.
* It calls AC_MSG_ERROR, which configure.m4 scripts are ''never''
supposed to do. If you don't want to build, then call $2.
* All static and --disable-dlopen builds are broken; they fall afoul
of whatever test configure.m4 is doing and therefore error out of
configure entirely (vs. simply disabling the hcoll component).
* There appear to be multiple shell scripting errors in the
configure.m4. Here's the output of "./configure --disable-dlopen":
{{{
--- MCA component coll:hcoll (m4 configuration macro)
checking for MCA component coll:hcoll compile mode... static
checking --with-hcoll value... simple ok (unspecified)
./configure: line 421: test: basic: integer expression expected
configure: error: Can not use coll/hcoll and coll/ml (static build)
simultaneously. You have two options:
1. Use static build & disable ml with:
--enable-mpi-no-build=coll-ml
2. Use dso build for ML & disable ml at runtime: -mca
coll self
./configure: line 310: return: basic: numeric argument required
./configure: line 320: exit: basic: numeric argument required
}}}
Finally, all of these configure.m4 errors aside, I don't understand
why there is a ''compile-time'' exclusion between the hcoll and ml
components. Why isn't this a ''run-time'' decision? Having what
seems to be an unnecessary compile-time exclusion goes against the
general Open MPI philosophy.
Note: Open MPI 1.7 is also broken in all the same ways. I suggest
that the RM's .ompi_ignore hcoll over there, too.
Mellanox: please fix.
This commit was SVN r28748.
value to signal that the operation of retrieving the element from the free list
failed. However in this case the returned pointer was set to NULL as well, so the
error code was redundant. Moreover, this was a continuous source of warnings when
the picky mode is on.
The attached parch remove the rc argument from the OMPI_FREE_LIST_GET and
OMPI_FREE_LIST_WAIT macros, and change to check if the item is NULL instead of
using the return code.
This commit was SVN r28722.
of individual regions (each region is a multiple of page size in
length), and each process claims its own regions by binding it to its
local memory. Each process would end up membining something like 16
individual regions in the overall shmem segment.
There were two errors in this code relating to the memory affinity
pinning. Some combination of these two errors would lead to kernel
panics (!) on my RHEL 6.2 x86_64 machines when used with mmap'ed
shared memory (not posix or sysv shared memory, curiously enough):
1. The shared memory segment is initially divided into two regions:
control and data. The control starts at the beginning of the shmem
segment, the data starts after that. The data portion, unfortunately,
was ''not'' aligned to a page. So all the multiple-of-page-size
regions that we divvy up were also not alined on page boundaries. And
therefore all the regions we tried to membind were not on page
boundaries.
The solution was to ensure that the data portion started on a page
boundary. Then all of the individual regions were on page boundaries,
too.
That being said, in my tests, Linux mbind() fails gracefully when the
address is not on a page boundary. So I'm not sure how this worked at
all / led to a kernel panic...
2. There was some bad pointer math that resulted in membinding regions
larger than they should have been, resulting in region overlaps.
There were definitely overlaps between regions in the same process;
it's likely that there were overlaps between regions of multiple
processes, too -- I'm not sure (and don't care to figure out :-) ).
The solution was to fix the pointer math so that each region membinds
exactly only itself and no neighboring/overlapping regions.
cmr:v1.7.2:reviewer=samuel
This commit was SVN r28442.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
flags, and mca flags are kept seperate until the very end. The main configure
wrapper flags should now be modified by using the OPAL_WRAPPER_FLAGS_ADD
macro. MCA components should either let <framework>_<component>_{LIBS,LDFLAGS}
be copied over OR set <framework>_<component>_WRAPPER_EXTRA_{LIBS,LDFLAGS}.
The situations in which WRAPPER CPPFLAGS can be set by MCA components was
made very small to match the one use case where it makes sense.
This commit was SVN r27950.
Reasoning: The old behavior was a little confusing. mca_base_components_open does not open an output stream so it is a little unexpected that mca_base_components_close does. To add to this several frameworks (that don't use mca_base_components_close) failed to close their output in the framework close function and others closed their output a second time. This change is an improvement to the symantics of mca_base_components_open/close as they are now symetric in their functionality.
This commit was SVN r27570.
pml/v:
- If vprotocol is not being used vprotocol_include_list is leaked. Assume vprotocol never takes ownership (see below) and always free the string.
coll/ml:
- (patch verified) calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
- Need to free mca_coll_ml_component.config_file_name on component close.
btl/openib:
- calling mca_base_param_lookup_string after mca_base_param_reg_string is unnecessary. The call to mca_base_param_lookup_string causes the value returned by mca_base_param_reg_string to be leaked.
vprotocol/base:
- There was no way for pml/v to determine if vprotocol took ownership of vprotocol_include_list. Fix by always never ownership (use strdup).
mca/base:
- param_lookup will result in storage->stringval to be a newly allocated string if the mca parameter has a string value. ensure this string is always freed.
cmr:v1.7
This commit was SVN r27569.
It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
* Only register the progress function on first call to a non-blocking
collective operation, to try to reduce overall performance impact
* Fix tag management in roll-over case
This commit was SVN r27498.
ompi/mca/sbgp/basesmsocket
orte/mca/rmaps/lama
Remove stale configure.params files from the sbgp framework as the OMPI build system no longer looks at those files.
This commit was SVN r27377.
The project includes following components and frameworks:
- ML Collective component
- NETPATTERNS and COMMPATTERNS common components
- BCOL framework
- SBGP framework
Note: By default the ML collective component is disabled. In order to enable
new collectives user should bump up the priority of ml component (coll_ml_priority)
=============================================
Primary Contributors (in alphabetical order):
Ishai Rabinovich (Mellanox)
Joshua S. Ladd (ORNL / Mellanox)
Manjunath Gorentla Venkata (ORNL)
Mike Dubman (Mellanox)
Noam Bloch (Mellanox)
Pavel (Pasha) Shamis (ORNL / Mellanox)
Richard Graham (ORNL / Mellanox)
Vasily Filipov (Mellanox)
This commit was SVN r27078.
technically this is a necessary thing to do, it wasn't a tragedy that
we didn't have it because err was initialize to 0 in the beginning of
the functions where this problem occurred. Also, OMPI will likely
abort if one of the MCA_PML_CALLs actually incurs an error (or, even
if it doesn't, MPI doesn't define the behavior anyway ;-) ).
But looking forward to an FT-aware world, fixing this issue is a Good
Thing. Many thanks to Hristo Iliev for pointing out the issue.
This commit was SVN r27070.
alignment, which typically causes problems on SPARC. Further, the pointer
manipulation to access elements in a round schedule was clumsy. This change
introduces macros to facilitate addressing and make it more portable.
This commit was SVN r26802.
* Use proper tag space (the negatives below the blocking communicators)
instead of the point-to-point space
* Use the PML interface instead of the MPI interface, since the MPI
interface 1) shouldn't be used by components and 2) doesn't like
negative tags
This commit was SVN r26693.
* Remove paffinity, maffinity, and carto frameworks -- they've been
wholly replaced by hwloc.
* Move ompi_mpi_init() affinity-setting/checking code down to ORTE.
* Update sm, smcuda, wv, and openib components to no longer use carto.
Instead, use hwloc data. There are still optimizations possible in
the sm/smcuda BTLs (i.e., making multiple mpools). Also, the old
carto-based code found out how many NUMA nodes were ''available''
-- not how many were used ''in this job''. The new hwloc-using
code computes the same value -- it was not updated to calculate how
many NUMA nodes are used ''by this job.''
* Note that I cannot compile the smcuda and wv BTLs -- I ''think''
they're right, but they need to be verified by their owners.
* The openib component now does a bunch of stuff to figure out where
"near" OpenFabrics devices are. '''THIS IS A CHANGE IN DEFAULT
BEHAVIOR!!''' and still needs to be verified by OpenFabrics vendors
(I do not have a NUMA machine with an OpenFabrics device that is a
non-uniform distance from multiple different NUMA nodes).
* Completely rewrite the OMPI_Affinity_str() routine from the
"affinity" mpiext extension. This extension now understands
hyperthreads; the output format of it has changed a bit to reflect
this new information.
* Bunches of minor changes around the code base to update names/types
from maffinity/paffinity-based names to hwloc-based names.
* Add some helper functions into the hwloc base, mainly having to do
with the fact that we have the hwloc data reporting ''all''
topology information, but sometimes you really only want the
(online | available) data.
This commit was SVN r26391.
algorithm to pairwise exchange instead of the default one. This might
improve the scheduling and relax the pressure on the network.
This commit was SVN r26246.
zeroes);
if so, use it for bit-operations like opal_cube_dim and opal_hibit.
Implement two versions of power-of-two.
In case of opal_next_poweroftwo, this reduces the average execution
time from 83 cycles to 4 cycles (Intel Nehalem, icc, -O2, inlining,
measured rdtsc, with loop over 2^27 values).
Numbers for other functions are similar (but of course heavily depend
on the usage, e.g. opal_hibit() with a start of 4 does not save
much). The bsr instruction on AMD Opteron is also not as fast.
- Replace various places where the next power-of-two is computed.
Tested on Intel Nehalem Cluster with openib, compilers GNU-4.6.1 and
Intel-12.0.4 using mpi_testsuite -t "Collective" with 128 processes.
This commit was SVN r25270.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
* change comm_init API - no need to pass local rank groups, fca calculates that on its own.
* remove local rank list from module - libfca maintains that now.
* in fca_bcast and fca_reduce - pass root rank index and let libfca figure out the local rank index.
This commit was SVN r23716.
* fixup lookup of supported ops by name:
in ompi 1.5.x the op string representation were changed from MPI_XXX to MPI_OP_XXX (relative to OMPI 1.4.x)
* keep compat between diff versions of FCA
* better error handling (return error if symbol not found)
* register to opal_progress and call fca_progress API
This commit was SVN r23597.
case individual entries aren't used, but dynamic rules are enabled
(i.e., at least one or more of them are not NULL, meaning that they'll
all be assumed to be either NULL or a valid value).
This commit was SVN r23361.
#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
Configure Option:
--enable-sysv
MCA Parameter:
mpi_common_sm
mpi_common_sm accepts a comma delimited list of: [sysv],mmap (order
dependent). The first component that is successfully selected is used. For
example, -mca mpi_common_sm sysv,mmap will first try sysv. If sysv is not
successfully selected, then mmap will be used. mmap will be used if
mpi_common_sm is not provided.
Notes:
Please make certain that your system's shmmax limit, or equivalent, is larger
than mpool_sm_min_size. Otherwise, shmget may fail.
This commit was SVN r23260.
make sure that we do not call coll_gather and coll_bcast in the very same
instances, since some collective (intra) modules do not seem to like the fact
if they are called for scount or rcount being zero (for regular
intra-communicator operations, this is handled on the MPI API layer).
Fixes trac:2405
This commit was SVN r23188.
The following Trac tickets were found above:
Ticket 2405 --> https://svn.open-mpi.org/trac/ompi/ticket/2405
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
INTERNAL to EXTRA_RETAIN, because not all "internal" communicators
have this flag set (only internal communicators with CIDs less than
their parent). Hence, what this flag ''really'' means is that there
was an extra RETAIN performed on it. So name the flag just that --
EXTRA_RETAIN -- indicating that an extra RETAIN has occurred.
This commit was SVN r22690.
The following SVN revision numbers were found above:
r22671 --> open-mpi/ompi@61dee816db
communicator that we created has a lower CID than the parent comm. This can
happen when using the hierarch collective communication module or for
inter-communicators (since we make a duplicate of the original communicator).
This is not a problem as long as the user calls MPI_Comm_free on the parent
communicator. However, if the communicators are not freed by the user but
released by Open MPI in MPI_Finalize, we walk through the list of still
available communicators and free them one by one. Thus, local_comm is freed
before the actual inter-communicator. However, the local_comm pointer in the
inter communicator will still contain the 'previous' address of the local_comm
and thus this will lead to a segmentation violation. In order to prevent that
from happening, we increase the reference counter local_comm by one if its CID
is lower than the parent. We cannot increase however its reference counter if
the CID of local_comm is larger than the CID of the inter communicators, since
a regular MPI_Comm_free would leave in that the case the local_comm hanging
around and thus we would not recycle CID's properly, which was the reason and
the cause for this trouble.
This commit fixes tickets 2094 and 2166. Note however, that I want to close
them manually, since a slightly different patch is required for the 1.4
series. This commit will have to be applied for the 1.5 series. And I will
need a volunteer to review it.
This commit was SVN r22671.
other process should ignore this value. Thanks to Michael Hofmann
for investigating this issue.
This commit closes trac:2268.
This commit was SVN r22639.
The following Trac tickets were found above:
Ticket 2268 --> https://svn.open-mpi.org/trac/ompi/ticket/2268
