It was agreed that opal_init_util had wound up being used in unintended ways, which raised the problem of getting reference counts to work right. However, fixing it would involve more pain than it was worth - and so long as the other layers are made to behave similarly, I have no preference either way.
Complete implementation will follow - for now, this just reverts the prior changes.
This commit was SVN r24886.
The following SVN revision numbers were found above:
r24862 --> open-mpi/ompi@aa92e0c4eb
r24864 --> open-mpi/ompi@a5062385c2
Add a WANT_FT_CR flag different from WANT_FT so tools like *-checkpoint are not built when a different FT technique is requested.
Also fix the C/R thread check so that it is only enabled if C/R is enabled, not generally when threads are enabled.
This commit was SVN r24769.
* Protect the '->bitmap' field if init() is called more than once [it shouldn't be, but if it is then this avoids a memory leak].
* Some new functions
* opal_bitmap_bitwise_and_inplace
* opal_bitmap_bitwise_or_inplace
* opal_bitmap_bitwise_xor_inplace
* opal_bitmap_are_different
* opal_bitmap_get_string
Adding these features to the trunk so others have access to them if they need them. A couple off trunk branches make use of them.
This commit was SVN r24767.
Fix a bug in the new code that prevented the system from correctly matching addresses.
Remove comments in the show-help text indicating that we would continue in the face of incorrect specifications - leave that to the calling layer to decide.
Modify the new opal_ifmatches so it returns error codes letting the caller better understand the result.
Modify the oob to ensure we abort if we don't find interfaces matching specified constraints, and that we do so without multiple error messages.
NOTE: we have a conflict in our standards. We have been using comma-delimited lists of interfaces for all our params. However, one param - opal_net_private_ipv4 - now uses semicolons instead of comma separators. No idea why, but it is confusing.
This commit was SVN r24755.
Interested readers can quench their curiosity either with one
of the Richard Stevens books (ISBN 9780201633467) or the
Wikipedia page (http://en.wikipedia.org/wiki/Subnetwork).
This commit was SVN r24680.
Correctly check the dependencies of MSYS env.
Set up configure include and lib path for building the package.
update a few more CMake scripts.
This commit was SVN r24663.
that enabling "local_only" by default could cause excessive
by-NUMA-node paging and/or OOMs (rather than allowing memory
allocations to spill over to other NUMA nodes).
This brought home the very real-world example of people buying servers
with more processors/cores than they need, just to get more memory.
We wouldn't want Badness to occur in such scenarios by default.
Instead, let people turn on "only allow memory allocations on my local
NUMA node" if their application would benefit from it.
This commit was SVN r24648.
After a long period of development with many starts and stops, we
finally got this where we wanted it.
This commit introduces 2 new MCA params (note that the
"maffinity_libnuma_policy" MCA param introduced by r24290 was removed
when libnuma support was removed). Remember that maffinity policies
are only in effect when paffinity is enaabled -- i.e., when processes
are bound to processors!
* '''maffinity_base_alloc_policy:''' Policy that determines how
general memory allocations are bound after MPI_INIT. A value of
"none" means that no memory policy is applied. A value of
"local_only" means that all memory allocations will be restricted
to the local NUMA node where each process is placed. Note that
operating system paging policies are unaffected by this setting.
For example, if "local_only" is used and local NUMA node memory is
exhausted, a new memory allocation may cause paging.
* '''maffinity_base_bind_failure_action:''' What Open MPI will do if
it explicitly tries to bind memory to a specific NUMA location, and
fails. Note that this is a different case than the general
allocation policy described by maffinity_base_alloc_policy. A
value of "warn" means that Open MPI will warn the first time this
happens, but allow the job to continue (possibly with degraded
performance). A value of "error" means that Open MPI will abort
the job if this happens.
This needs at least a little soak time on the trunk before going to
v1.5.
This commit was SVN r24639.
The following SVN revision numbers were found above:
r24290 --> open-mpi/ompi@afa654746c
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
Upgrade to hwloc 1.2 (from hwloc 1.1.2). This should fix the problems
Nathan's seeing in #2778.
Let's let this soak on the trunk for a little while and see how LANL's
MTT's work out. If that works, then we can CMR this to v1.5.
This commit was SVN r24635.
The following Trac tickets were found above:
Ticket 2778 --> https://svn.open-mpi.org/trac/ompi/ticket/2778
Nth core, so it fell over to try to find the Nth PU.
-----
hwloc isn't able to find cores on all platforms. Example: PPC64
running RHEL 5.4 (linux kernel 2.6.18) only reports NUMA nodes and
PU's. Fine.
However, note that hwloc_get_obj_by_type() will return NULL in 2
(effectively) different cases:
- no objects of the requested type were found
- the Nth object of the requested type was not found
So first we have to see if we can find *any* cores by looking for the
0th core. If we find it, then try to find the Nth core. Otherwise,
try to find the Nth PU.
This commit was SVN r24632.
Rename the memusage sensor plugin to "resusage" as it will soon be updated to include full process stat monitoring.
Extend the heartbeat sensor to report node and process stats in the heartbeat.
Store the process and node stats in their respective orte_xxx_t object.
This commit was SVN r24629.
released):
backport hwloc r 3416 from trunk: Add cache info entry _after_ checking
that we need one, thanks Andriy Gapon for the fix
This commit was SVN r24612.
The following SVN revision numbers were found above:
r3418 --> open-mpi/ompi@9972663a12
--disable-dlopen is used. Thanks to David Gunter for reporting the
issue.
This commit was SVN r24603.
The following Trac tickets were found above:
Ticket 2768 --> https://svn.open-mpi.org/trac/ompi/ticket/2768
appeared multiple times in ompi_info output (so did others, but this
is the one that was noticed). Ensure that we don't repeat
opal_paffinity_base_register_params() multiple times.
This commit was SVN r24569.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
* Convert from AC_TRY_RUN to AC_RUN_IFELSE.
* Excellent suggestion from Paul Hargrove: use AC_CHECK_FUNC to look
for a Linuxthreads-specific symbol when we're cross compiling to
see if threads will have different PIDs (because AC_CHECK_FUNC
works properly even when in cross-compiling environments).
Background: the old/Linuxthreads-based pthreads implementation used
the Linux clone() call to make threads, which effectively meant that
each thread had a different PID. The new NPTL pthreads implementation
does things better, meaning that threads have the same PID.
Open MPI no longer supports threads with different PIDs -- we ripped
out the supporting code for threads with different PIDs because we
don't have systems available to test this on anymore (anyone who still
has such a system can still use older versions of Open MPI). Hence,
configure needs to determine whether the target system will have the
same PID for threads or not -- even if we're cross-compiling. The
current test compiles and runs a multi-threaded app that checks PIDs
of different threads, but we clearly can't do that in a
cross-compiling environment. So use AC_CHECK_FUNC in cross-compiling
environments.
Simple, no?
This commit was SVN r24537.
There was no compelling reason to support such old kernels. Accordingly, convert the test to print a nice error message indicating we no longer support old kernels (but indicate that earlier OMPI versions do) and error out. Remove all code that was protected by "if have different pids" since it can no longer be compiled.
This commit was SVN r24531.
fix will be included in hwloc 1.1.2.
Brad -- can you verify that this fixes the issue for you?
Fixes trac:2732.
This commit was SVN r24450.
The following Trac tickets were found above:
Ticket 2732 --> https://svn.open-mpi.org/trac/ompi/ticket/2732
filenames -- don't include the project name ("opal")
* Don't link maffinity/hwloc and paffinity/hwloc against the common
hwloc in the static build case (because this will result in
duplicate symbols)
This commit was SVN r24447.
hopefully, this now compiles for libnuma 0.9.x and libnuma 2.0.x.
Fixes for the strategy discussed in the commit message for r24442
(i.e., check against numa_get_mems_allowed(), which only exists in
libnuma 2.0.x) and the new new new plan on #2698 coming in a separate
commit.
This commit was SVN r24443.
The following SVN revision numbers were found above:
r24442 --> open-mpi/ompi@90a8fe4aad
(with libnuma-2.0.4 / LIBNUMA_API_VERSION 2): numa_get_run_node_mask
returns a struct bitmask *.
Whether it's a good idea to blindly pass that on to
numa_set_membind() is another matter: one might want to match against
the list returned by numa_get_mems_allowed(), which may be set by the
outside environment.
Refs trac:2698.
This commit was SVN r24442.
The following SVN revision numbers were found above:
r24421 --> open-mpi/ompi@31510e683b
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
Update the CMake script for checking mca subdirs.
Add windows support for __attribute__ packed structures.
Define usleep and posix_memalign with equivalent windows functions.
And a few minor fixes, type casts.
This commit was SVN r24429.
what memory node the process is running on (which is guaranteed to be
a good answer because maffinity won't be invoked unless the process is
already bound to a specific processor), and then bind our memory to
that.
Refs trac:2698.
This commit was SVN r24421.
The following SVN revision numbers were found above:
r24290 --> open-mpi/ompi@afa654746c
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
OMPI supports multiple different repository systems (SVN, hg, git).
But the VERSION file has listed "want_svn" and "svn_r" as fields, even
though the actual repo system and version may not be SVN.
So search/replace those fields (and derrivative values that come from
those fields) with "want_repo_rev" and "repo_rev", respectively.
This commit was SVN r24405.
Add some new proc/job states
Rename a constant to reflect coming change - remove the arbitrary difference between restarting a proc locally and relocating it to another node in terms of the number of restarts allowed.
Add pretty-print of signals for "proc aborted due to signal" reports.
This commit was SVN r24378.
The following SVN revision numbers were found above:
r24371 --> open-mpi/ompi@93d28a5792
This means that the converters (opal_err2str, orte_err2str) can now
return NULL as a "silent error". The return value of opal_err2str_fn_t
is the status of the operation (OPAL_SUCCESS or OPAL_ERROR).
This fixes the "Unknown error" message issues on the trunk.
This commit was SVN r24371.
Temporarily remove hwloc's internal version of myriexpress.h. It is
causing a problem when compiling Open MPI with MX support because
hwloc uses AC_CONFIG_HEADER in hwloc's hwloc.m4 to generate
opal/mca/paffinity/hwloc/hwloc/include/hwloc/config.h.
AC_CONFIG_HEADER apparently has the (undocumented) side effect of
adding -I$(top_builddir)/opal/mca/paffinity/hwloc/hwloc/include/hwloc
to OMPI's compilation flags. Hence, when the OMPI MX components are
compiled and #include "myriexpress.h" (or <myriexpress.h>) they see
hwloc's myriexpress.h before the system one. Badness ensures.
This removal is temporary because we need to figure out a better
solution. But for now, OMPI is not using hwloc's myriexpress.h file --
so it's safe to remove. I'll push this issue upstream to hwloc to
figure out a better solution...
This commit was SVN r24354.
The following Trac tickets were found above:
Ticket 2690 --> https://svn.open-mpi.org/trac/ompi/ticket/2690
Short Version:
--------------
Event engine needs to be flushed so it does not use old/stale file descriptors.
Long Version:
-------------
The problem was that the restarted process was waiting for the socket to the local daemon to finish establishing during the 'sync' operation. The core problem was that the daemon was sending a header of 36 bytes, but the restarted process only received 35 bytes of the message. So the restarted process became stuck waiting for the last byte to arrive.
After many hours of digging, I figured out that the event engine was using the same file descriptor for its evsig_cb functionality (to signal itself when a signal arrives). So when the daemon wrote in to the new fd the event engine was stealing the first byte (*shakes fist at event engine*) before the recv() could be posted.
The solution is to use the event_reinit() function on restart to re-establish the now-stale file descriptors in the event engine. This seems to have fixed the problem.
A few other minor things:
-------------------------
* Add a check to make sure the event engine is balanced in its init/finalize
* Add the opal_event_base_close() to the BLCR restart exec function (still not 100% sure it is needed, but there it is).
This commit was SVN r24296.
last December. :-(
Add new MCA param: maffinity_libnuma_policy. Thanks to David
Singleton for the suggestion. Here's the help text about it:
{{{
MCA maffinity: parameter "maffinity_libnuma_policy" (current value:
<loose>, data source: default value)
Binding policy that determines what happens if memory
is unavailable on the local NUMA node. A value of
"strict" means that the memory allocation will fail;
a value of "loose" means that the memory allocation
will spill over to another NUMA node.
}}}
This commit was SVN r24290.
either direct link to these basic predefined types, or a combination of them.
Anyway, the first items in the datatype list belong to OPAL, the second round
are MPI datatypes created by composing basic OPAL datatypes, and the last
batch are mapped datatype (direct correspondance between an OMPI datatype and
an OPAL one such as int -> int32_t).
Modify the op to fit this new scheme.
This commit was SVN r24247.
the module to use the new hwloc bitmap API (the cpuset API is both
klunkier and deprecated), which simplified a few things.
This commit was SVN r24217.
{{{
base/paffinity_base_service.c: In function ‘opal_paffinity_base_cset2mapstr’:
base/paffinity_base_service.c:623: warning: unused variable ‘range_last’
base/paffinity_base_service.c:623: warning: unused variable ‘range_first’
base/paffinity_base_service.c:622: warning: unused variable ‘count’
base/paffinity_base_service.c:622: warning: unused variable ‘m’
}}}
{{{
connect/btl_openib_connect_oob.c: In function ‘init_ud_qp’:
connect/btl_openib_connect_oob.c:1111: warning: control reaches end of non-void function
connect/btl_openib_connect_oob.c: In function ‘init_device’:
connect/btl_openib_connect_oob.c:1235: warning: unused variable ‘i’
connect/btl_openib_connect_oob.c: In function ‘get_pathrecord_sl’:
connect/btl_openib_connect_oob.c:1323: warning: unused variable ‘i’
}}}
This commit was SVN r24196.
It is statically initialized to the real back-end OPAL show_help
function. During orte_show_help_init(), the variable is re-assigned
with the value of the back-end ORTE show_help function (the one that
does error message aggregation).
Therefore, anything that calls opal_show_help() after a certain point
in orte_init() will have their show_help messages be aggregated.
w00t! Even code down in OPAL -- that has no knowledge of ORTE -- will
have their messages aggregated. '''Double w00t!'''
During orte_show_help_finalize(), we restore the original pointer
value so that it something calls opal_show_help() after
orte_finalize(), it'll still work properly (but it won't be
aggregated).
This commit was SVN r24185.
1. Remove it from libevent207.h because it is not needed.
2. Add compat to the include list so it can use queue.h when needed.
This commit was SVN r24144.
Change OMPI code in libevent to not use bool.
Add some comments to indicate OMPI specific code.
This should fix compiles on Sun Studio Solaris.
This commit was SVN r24062.
As memmove is slower than memcpy, I added the required logic to only use it when
really necessary.
No modification from developers point of view, you should always call
opal_datatype_copy_content_same_ddt.
This commit was SVN r24047.
It's not possible to combine two shared libraries on Windows, so we have to do it a bit different. First generate a small event static library by just linking the object files, and link it into other libraries that needs the libevent API.
This commit was SVN r24039.
handles more modern versions of Autoconf's --program-transform
arguments. Also make it clear that the message is coming from Open
MPI logic, so that we don't blame Autoconf, Red Hat, or anyone else
next time!
This commit was SVN r24024.
The following Trac tickets were found above:
Ticket 2611 --> https://svn.open-mpi.org/trac/ompi/ticket/2611
1. create DLL A, export symbols of A, import nothing (A normally is OPAL)
should define _USRDLL , A_EXPORT
2. create DLL B, export symbols of B, import A.lib (B could be ORTE, OMPI or other ompi tools)
should define _USRDLL, B_EXPORT
3. create DLL C, import B.dll (C could be external libs or apps)
should define B_IMPORT
This commit was SVN r24016.
libevent creates its event-config.h during "make all" (vs. during
configure). The prior method around this didn't work because it wrote
an event-config.h.in in the source tree -- a Bad Idea(tm). The new
way uses AC_CONFIG_COMMAND to get stuff executed at the end of
config.status to create event-config.h. This seems to work properly
during make distcheck.
This commit was SVN r23975.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
After talking with Brian, we're pretty sure that this is only because
really, really old libevent didn't allow bitwise or-ing of the other
loop types, because what we really need is (EVLOOP_ONCE |
EVLOOP_NONBLOCK). And that's what EVLOOP_ONELOOP did (i.e., we
changed the logic of libevent's event.c to let ONELOOP do both ONCE
and NONBLOCK things).
In the new libevent version, we didn't implement EVLOOP_ONELOOP
properly. As a result, and we got hangs in the SM BTL add_procs
function. Note that the SM BTL wasn't to blame -- it was purely a
side-effect of bad ONELOOP integration (i.e., if you got past the SM
BTL add_procs, you may well have hung somewhere else).
This commit removes all ONELOOP customizations from event.c and
returns it to (almost) its original state from the libevent 2.0.7-rc
distribution. Everwhere in the code base where we used ONELOOP, we
now use (ONCE | NONBLOCK).
This commit was SVN r23957.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
* Update to be safe for AC 2.68 by using AC_LINK_IFELSE instead of
AC_TRY_LINK
* If enable visibility was used, ensure we fail if the compiler
doesn't support it
* Rename OMPI_CHECK_VISIBILITY -> OPAL_CHECK_VISIBILITY (and all
internal variables)
This commit was SVN r23923.
