Nothing is generated in this file; this commit essentially just
renames ompi_config.h.in -> ompi_config.h.
cmr=v1.8.1:reviewer=dgoodell
This commit was SVN r31395.
Also, since I put some of the macros for these silent/verbose rules up
in the top-level Makefile.man-page-rules file, I renamed it to
Makefile.ompi-rules.
I've had this sitting around for a while; now seems like as good a
time as any to commit it.
This commit was SVN r31271.
Also added some missing values and sentinels.
cmr=v1.8:ticket=trac:4470
This commit was SVN r31263.
The following SVN revision numbers were found above:
r31260 --> open-mpi/ompi@69036437b7
The following Trac tickets were found above:
Ticket 4470 --> https://svn.open-mpi.org/trac/ompi/ticket/4470
See https://svn.mpi-forum.org/trac/mpi-forum-web/ticket/377
This ticket adds the following functions to the standard:
- MPI_T_cvar_get_index, MPI_T_pvar_get_index, and MPI_T_category_get_index
The ticket has passed and the functions are part of MPI-3.1 that will
be released sometime later this year. In Open MPI the functions expose
existing internal functionality so they are low-risk to add to 1.8.0. I
will leave it up to Ralph whether he wants to accept these into 1.8.
cmr=v1.8:reviewer=rhc
This commit was SVN r31037.
Dave Goodell correctly pointed out that it is unusual to return MPI
error classes from internal ompi functions. Correct this in the RMA
case by adding an internal error code to match MPI_ERR_RMA_SYNC.
This does change OMPI_ERR_MAX. I don't think this will cause any
problems with ABI.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31012.
- Move the ptrdiff_t tests up higher in configure.ac to be with the
rest of the type tests.
- Create new OMPI_FIND_MPI_AINT_COUNT_OFFSET for finding the
corresponding types of MPI_Aint, MPI_Count, and MPI_Offset.
Consolidate all the old C and Fortran tests into this new macro (and
.m4 file).
- Fix Fortran MPI_*_KIND tests that incorrectly keyed off assumed
types (e.g., int64_t) rather than whatever the corresponding C
MPI_Aint, MPI_Count, MPI_Offset types turned out to be.
- Add new logic to ensure that sizeof(MPI_Count) <= sizeof(size_t),
because our entire PML, BTL, and convertor infrastructure requires
this. As a side effect, just like MPI_Offset the same type of
MPI_Count (because MPI_Count has to be able to hold an MPI_Offset,
so we can't let MPI_Offset be larger than a MPI_Count).
This commit was SVN r30776.
The following Trac tickets were found above:
Ticket 4205 --> https://svn.open-mpi.org/trac/ompi/ticket/4205
Ensure that these two flags are in all of mpif.h, the mpi module, and
the mpi_f08 module. Thanks to Rolf Rabenseifner for pointing out the
issue.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30519.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
should have been all along and fix one place that uses the file
Update opal_portable_platform.h with changes to mpi_portable_platform.h made
in r29608.
Make mpi_portable_platform.h a symlink to opal_portable_platform.h, so that
they won't get out of sync. I'd like to remove mpi_portable_platform.h, but
we don't automatically add -I${includedir}/openmpi/ to make that sane from
a header include point of view, so that's future work.
This commit was SVN r29618.
The following SVN revision numbers were found above:
r29608 --> open-mpi/ompi@b71bd51cdd
patch. See ticket #3885, comment 10 for an explination of why calling
_STRINGIFY on something that's not a numerical constant is always a bad idea.
This commit was SVN r29613.
The following SVN revision numbers were found above:
r29608 --> open-mpi/ompi@b71bd51cdd
MPI_Comm_idup.
As part of this work I implemented a basic request scheduler in
ompi/comm/comm_request.c. This scheduler might be useful for more
than just communicator requests and could be moved to ompi/request
if there is a demand. Otherwise I will leave it where it is.
Added a non-blocking version of ompi_comm_set to support ompi_comm_idup.
The call makes a recursive call to comm_dup and a non-blocking version
was needed. To simplify the code the blocking version calls the nonblocking
version and waits on the resulting request if one exists.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29334.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
arrays.
The MPI 3.0 standard added const to all in buffers in the C bindings. This
commit adds the const keyword and in most cases casts const away. We will
eventually should go through and update the various interfaces (coll, pml,
io, etc) to take the const keyword. The group, comm, win, and datatype
interfaces have been updated with const.
cmr=v1.7.4:ticket=trac:3785:reviewer=jsquyres
This commit was SVN r29266.
The following Trac tickets were found above:
Ticket 3785 --> https://svn.open-mpi.org/trac/ompi/ticket/3785
Blocking versions are simple linear algorithms implemented in coll/basic. Non-
blocking versions are from libnbc 1.1.1. All algorithms have been tested with
simple test cases.
cmr=v1.7.4:reviewer=jsquyres
This commit was SVN r29265.
This commit changes the underlying opal complex datatypes to match the
C99 types: float _Complex, double _Complex, and long double _Complex. The
fortran and C++ types now are aliases to these basic types instead of
structure types. The operators in ompi/mca/op/base now work on only the
C99 types and the fortran types use these operators if the fortran type
matches a C complex type (this should almost always be the case.)
C99 is not is use in both the datatype and operator code and should make
the code both cleaner and much less fragile.
This commit was SVN r29193.
Add support for MPI_Count type and MPI_COUNT datatype and add the required
MPI-3 functions MPI_Get_elements_x, MPI_Status_set_elements_x,
MPI_Type_get_extent_x, MPI_Type_get_true_extent_x, and MPI_Type_size_x.
This commit adds only the C bindings. Fortran bindins will be added in
another commit. For now the MPI_Count type is define to have the same size
as MPI_Offset. The type is required to be at least as large as MPI_Offset
and MPI_Aint. The type was initially intended to be a ssize_t (if it was
the same size as a long long) but there were issues compiling romio with
that definition (despite the inclusion of stddef.h).
I updated the datatype engine to use size_t instead of uint32_t to support
large datatypes. This will require some review to make sure that 1) the
changes are beneficial, 2) nothing was broken by the change (I doubt
anything was), and 3) there are no performance regressions due to this
change.
Increase the maximum number of predifined datatypes to support MPI_Count
Put common get_elements code to ompi/datatype/ompi_datatype_get_elements.c
Update MPI_Get_count to reflect changes in MPI-3 (return MPI_UNDEFINED when the count is too large for an int)
This commit was SVN r28932.
This commit adds an API for registering and querying performance
variables (mca_base_pvar) in the MCA base. The existing MCA variable
system API has been updated to reflect the new API: MCA variable
groups have performance variables, and new types have been added (double,
unsigned long long) to reflect what is required by the MPI_T
interface. Additionally, the MCA variable group code has been split
into its own set of files: mca_base_var_group.[ch].
Details of the new API can be found in doxygen comments in the header:
mca_base_pvar.h.
Other changes to the variable system:
- Use an opal_hash_table to speed up variable/group lookup.
- Clean up code associated with MCA variable types.
- Registered performance variables are printed by ompi_info -a. In the
future an option should be added to control this behavior.
Changes to OMPI:
- Added full support for the MPI_T performance variable interface.
This commit was SVN r28800.
This patch reshape the way we deal with topologies completely. Where
our topologies were mainly storage components (they were not capable
of creating the new communicator), the new version is built around a
[possibly] common representation (in mca/topo/topo.h), but the functions
to attach and retrieve the topological information are specific to each
component. As a result the ompi_create_cart and ompi_create_graph functions
become useless and have been removed.
In addition to adding the internal infrastructure to manage the topology
information, it updates the MPI interface, and the debuggers support and
provides all Fortran interfaces.
This commit was SVN r28687.
MPI constants, which led to also find that MPI_ERR_WIN was mistakenly
not defined in the Fortran MPI constants.
This fix also needs to be applied to v1.7. Brian -- can you review?
cmr:v1.7
This commit was SVN r28102.
Not sure what happened here, but the resulting trunk wouldn't even configure. After spending time fixing that problem, I found it wouldn't compile due to multiple syntax errors that had been introduced in both the OPAL and OMPI layer. This raised questions as to the completeness of the work.
Given that the author is departing, I pinged Jeff about it and we agreed to revert this for now. Hopefully, it can either be fixed by the author prior to actual departure, or someone else can pick it up (now that it is in the history) and fix it.
This commit was SVN r27511.
The following SVN revision numbers were found above:
r27508 --> open-mpi/ompi@12c3c743de
r27509 --> open-mpi/ompi@79e4a8ca38
r27510 --> open-mpi/ompi@1ad5ff625a
vals.
* Note that the pre-defined Info objects don't need to have fortran
indexes assigned; they should already be assigned in the
constructor. So add an assert() to ensure that this really happens
properly.
* Add MPI_ENV_INFO to the Fortran interfaces
This commit was SVN r27039.
"num_app_ctx" - the number of app_contexts in the job
"first_rank" - the MPI rank of the first process in each app_context
"np" - the number of procs in each app_context
Still need clarification on the MPI_Init portion of the ticket. Specifically, does the ticket call for returning an error is someone calls MPI_Init more than once in a program? We set a flag to tell us that we have been initialized, but currently never check it.
This commit was SVN r27005.
