they might require special tools (not sure if sed with multiple -e
arguments is totally portable)
- ignore the opalcc.1 man page. Couldn't do this in the previous
man page commit (r12192) because I was removing opalcc.1 in that
commit.
This commit was SVN r12194.
The following SVN revision numbers were found above:
r12192 --> open-mpi/ompi@581a4b0a4e
some issues with the C #defines SEEK_{SET, END, POS}. The workaround
involves some hackery that should work in almost every common use case
for the C stdio constants (and all the legal issues of the MPI constants).
The one issue is that the C stdio constants are now const ints instead
of #defines, which means that #ifdef checks will fail for the constants.
Behavior can be disabled at either configure time or build time.
Refs trac:387
This commit was SVN r12121.
The following Trac tickets were found above:
Ticket 387 --> https://svn.open-mpi.org/trac/ompi/ticket/387
remove requirements on .la files on wrapper scripts
Ticket: #374
extend compilers to support 32 bit and 64 bit in one version of the wrapper
Submitted by: Dan Lacher
Reviewed by: Rolf Vandevaart
This commit was SVN r11908.
8 bytes. Adjust the configure tests to allow for this case.
Refs trac:427
This commit was SVN r11859.
The following Trac tickets were found above:
Ticket 427 --> https://svn.open-mpi.org/trac/ompi/ticket/427
the component is configured successfully. Otherwise, we can end up
trying to run make in the romio directory without any Makefiles. This
really only happens on the targets that recurse into DIST_SUBDIRS - ie
dist, maintainer-clean, and distclean
refs trac:411
This commit was SVN r11807.
The following Trac tickets were found above:
Ticket 411 --> https://svn.open-mpi.org/trac/ompi/ticket/411
* Use $31 instead of mnemonic zero for the gcc inline
assembly test, as the GNU assembler doesn't like
zero, but both Tru64 and GNU assembler should be fine
with $31
* Disable Linux timer component on Alpha. The CPU timer
rolls over every 10 seconds or less, so it's kinda
worthless for our needs.
* Fix some escaping issues when local functions are
denoted with a $
* Remove C++ comments from the Alpha assembly.
* Add base assembly code for the non-inlined functions
on Alpha
This commit was SVN r11764.
CXXFLAGS are set to -Wall -Werror. Thanks to Ralf for the patch.
refs trac:290
This commit was SVN r11762.
The following Trac tickets were found above:
Ticket 290 --> https://svn.open-mpi.org/trac/ompi/ticket/290
LoadLeveler only sets LOADL_PROCESSOR_LIST when there are 128 or less tasks allocated to a job. The POE RAS relied on this variable so I created a new RAS which uses the LoadLeveler API instead of relying on the environment variable. This still needs some testing, so for now we use the POE RAS whenever LOADL_PROCESSOR_LIST, otherwise we fall back on this component.
Unfortunately, this will require an autogen...
This commit was SVN r11732.
so that we include all the ev series on platforms that report more than
just "alpha". Fixes one of many issues on Alpha reported by a user.
refs trac:380
This commit was SVN r11683.
The following Trac tickets were found above:
Ticket 380 --> https://svn.open-mpi.org/trac/ompi/ticket/380
Add --enable-orterun-prefix-by-default (and a synonym:
--enable-mpirun-prefix-by-default) to make orterun always behave as if
"--prefix $prefix" was given on the command line (where $prefix is the
value given to the --prefix option to configure). This prevents many
rsh/ssh users from needing to modify their shell startup files to set
the LD_LIBRARY_PATH for Open MPI (they will still need to set PATH or
otherwise find the OMPI executables to mpicc/mpirun/etc. their MPI
applications).
Also added --noprefix option to orterun to disable this behavior.
Finally, note that even if --enable-orterun-prefix-by-default is
specified, if the user specifies --prefix or /path/to/mpirun, these
options will override the default value of the prefix ($prefix).
This commit was SVN r11669.
The following Trac tickets were found above:
Ticket 377 --> https://svn.open-mpi.org/trac/ompi/ticket/377
This provides support for the Infinipath interconnect using the PSM API.
Of note:
This version has a "hackaround" we always return 1 or greater from
the MTL PSM progress function, this should be examined further.
This commit was SVN r11655.
for prefetch and branch prediction work. A non-happy compiler could
just think these were functions and we wouldn't get the error, because
we didn't try to link.
Refs trac:287
This commit was SVN r11333.
The following Trac tickets were found above:
Ticket 287 --> https://svn.open-mpi.org/trac/ompi/ticket/287
before checking if we are able to compile the test program. This is required
for windows as the C++ conftest.c file generated by configure cannot be
compiled with the Microsoft cl.exe compiler (because of the exit function
prototype). So if we detect a vendor equal to microsoft we will assume
that the compiler is correctly installed (which is true on Windows most
of the time anyway).
This commit was SVN r11268.
releases on Linux and OS X) don't handle const_cast<> of 2-dimensional
arrays properly. If we're using one of the compilers that isn't friendly
to such casts, fall back to a standard C-style cast.
refs: #271
This commit was SVN r11263.
to cause them to miscompile TCP-related code.
refs trac:276
This commit was SVN r11258.
The following Trac tickets were found above:
Ticket 276 --> https://svn.open-mpi.org/trac/ompi/ticket/276
on almost all platforms (except OS X... sigh...). This is the merge
of r10846 - 10894 from the tmp/f90-shared branch to the trunk.
This commit was SVN r11103.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r10846
.proc/.endp-declarations for functions in order to be able to
link successfully.
Currently used in configure, only.
There has not been found another arch, where this is necessary.
So asm-data.txt and base/default.conf has not been changed.
This commit was SVN r11068.
of send/receives outstanding.
Use ibv_cq_resize if available after initial creation of completion queue if
cq_size is too small (based on number of peers).
This commit was SVN r11053.
libevent-1.1a.
svn merge -r10917:11006 https://svn.open-mpi.org/svn/ompi/tmp/libevent-update
This commit was SVN r11022.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r10917
r11006
than $(LN_S). This causes problems with with Windows and probably
elsewhere (re: #200). So use a slightly different trick to get the
right header selected for the MEMCPY and TIMER components.
* Using the same trick used to solve the AC_CONFIG_LINKS problem,
stop using a separate header file for direct calling in the
PML and MTL. This lets me remove some icky code in ompi_mca.m4
that was more fragile than I really liked.
This commit was SVN r10841.
We have repeatedly seen users inadvertantly try to use a C compiler
for $CXX (e.g., using icc instead of icpc in recent versions of the
Intel compiler). Unfortunately, this would "sorta work", meaning that
configure would complete successfully and the build would fail much
later in the process (when $CXX was used to try to link a C++
compiler). This was further compounded by the fact that many C
compilers will switch into "C++ mode" when they compile files that end
in .cc -- meaning that they'll *compile* C++ codes properly, but they
won't *link* properly. Hence, users would get all the way down to
compiling the C++ MPI bindings or ompi_info (i.e., very late in the
build process) before the problem became evident.
We already have a test in configure that tries to compile, link, and
run a sample C++ program. This helped ensure that $CXX was a valid
compiler, but it did not catch if the user accidentally supplied a C
compiler instead of a C++ compiler because the test program was simply
"return 0". This commit updates the test program to use some
C++-specific constructs (std::string) so that if the user supplies a C
compiler in $CXX, the program may *compile*, but it will definitely
fail to *link*.
Hence, the process will fail early in configure (with a descriptive
message about how the compiler failed to work properly) rather than
late in the build.
This commit was SVN r10829.
interconnects that provide matching logic in the library.
Currently includes support for MX and some support for
Portals
* Fix overuse of proc_pml pointer on the ompi_proc structuer,
splitting into proc_pml for pml data and proc_bml for
the BML endpoint data
* bug fixes in bsend init code, which wasn't being used by
the OB1 or DR PMLs...
This commit was SVN r10642.
on platforms without a 32-bit compare and swap implementation. There isn't
such a thing on Sparc v8 chips, so we can't support those platforms right
now. Should be possible to make opal_atomic_lifo less atomic on these
platforms, but not in the time allotted.
This commit was SVN r10407.
are 3 arguments: the pointer to the memory location to prefetch, the type of
operation that will be done on the memory (read or write) and the expected
locality.
This commit was SVN r10294.
whether an if statement is likely to be taken and for prefetching memory.
Current macros:
OPAL_LIKELY(expression)
OPAL_UNLIKELY(expression)
OPAL_PREFETC(address)
This commit was SVN r10278.
support for progress threads, so we shouldn't build them or try to use
them when support for progress threads has been requested. The TCP, GM,
SELF, and SM BTLs should have progress thread support, so they aren't
disabled. The Portals BTL isn't compiled on platforms with threads,
so it doens't need to be updated.
This commit was SVN r10156.
