This commit fixes two bugs:
- We were not correctly setting the lock type in the outstanding lock
for lock_all. This caused undefined behavior.
- flush_all was incorrectly checking for comm size - 1 lock acks but
comm size flush acks. This is the reverse of what was intended.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31226.
It is possible to get into a situation where a small accumulate operation
can not be completed because a large accumulate operation holds the lock.
In this case we may return from wait/flush/etc before the operation is
complete. To handle this case increment the expected incoming fragment
count when queuing an accumulate operation and increment the incoming
fragment count after processing the accumulate operation.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31224.
This commit fixes two issues:
- osc/rdma: The target side of an accumulate was using the target datatype
in the receive to the packed buffer. This was conflicting with the way
the reduction is done into the target buffer. Changed the receive to use
the primitive datatype.
- osc/base: The copy table was completely wrong. Fixed the table to match
the underlying datatypes (which are opal not ompi datatypes).
- osc/base: There is a problem using the optimized description. Fall back
on using the non-optimized description until we can understand what is
going wrong.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31204.
results
The code to handle completion messages did not correctly increment the
number of expected messages. This could cause wait to return before all
incoming messages are complete.
I also added a check to ensure that start returns an error if we are in
a passive access epoch.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31203.
This commit adds large datatype description support to the osc/rdma
component. Support is provided by an additional send/recv of the datatype
description if the description does not fit in an eager buffer. The
code is designed to require minimal new code and not for speed. We
consider this code path to be a slow path.
Refs trac:1905
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31197.
The following Trac tickets were found above:
Ticket 1905 --> https://svn.open-mpi.org/trac/ompi/ticket/1905
It is not valid to call flush outside a passive target epoch nor is
it valid to call lock/lock_all when no_locks is set. In the former
we were just semantically incorrect and the later would crash and
burn.
cmr=v1.7.5:ticket=trac:4382
This commit was SVN r31046.
The following Trac tickets were found above:
Ticket 4382 --> https://svn.open-mpi.org/trac/ompi/ticket/4382
This fixes a bug in r31029 which removes the use of the pml base request
(also not a good way since cm doesn't use the base request). We now allocate
a data structure (ugh) to determine the needed information. Tested with
mtt/onesided.
cmr=v1.7.5:ticket=trac:4379
This commit was SVN r31044.
The following SVN revision numbers were found above:
r31029 --> open-mpi/ompi@29e00f9161
The following Trac tickets were found above:
Ticket 4379 --> https://svn.open-mpi.org/trac/ompi/ticket/4379
- Return an error if the caller specified both MPI_MODE_NOPRECEDE and
MPI_MODE_NOSUCCEED to MPI_Win_fence.
- Return an error if the caller attempts to enter an active target
epoch while already in a passive target epoch.
- End an active target epoch if MPI_Win_fence is called with
MPI_MODE_NOSUCCEED.
cmr=v1.7.5:ticket=trac:4382
This commit was SVN r31043.
The following Trac tickets were found above:
Ticket 4382 --> https://svn.open-mpi.org/trac/ompi/ticket/4382
need to enable the access epoch in MPI_Win_fence.
I missed this change when I fixed the semantics of MPI_Win_create. With
this commit our one-sided MTT runs are now running clean.
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r31041.
It seems we can't release accumulate buffers in completion callbacks
because the btls don't release registration resources until after the
callback has fired. The fix is to keep track of the unused buffers and
free them later. This should resolve issues when running IMB-EXT and
IMB-RMA.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31029.
Dave Goodell correctly pointed out that it is unusual to return MPI
error classes from internal ompi functions. Correct this in the RMA
case by adding an internal error code to match MPI_ERR_RMA_SYNC.
This does change OMPI_ERR_MAX. I don't think this will cause any
problems with ABI.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31012.
This commit resolves a number of crashed discovered my the onesided
tests in MTT. The functions in question were operating on the assumption
the user was calling RMA functions correctly.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31008.
The datatype unpacking code assumes that the packed datatype buffer has the
same alignment as an OPAL_PTRDIFF_TYPE. This was not enforced by the rdma
one-sided component. I changed the ordering and sized of various osc/rdma
headers to ensure their sizes are a multiple of 8-bytes and modified the
fragment allocation call to ensure all headers are 8-byte aligned. While
not the cleanest way to handle this situation it should resolve the issue.
Fixes trac:4315
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r30974.
The following Trac tickets were found above:
Ticket 4315 --> https://svn.open-mpi.org/trac/ompi/ticket/4315
assumes the send request is derived from mca_pml_base_send_request_t,
but this is not true for pml cm, so we end up freeing invalid pointer.
We cannot take the data pointer from the pml send request, so we pass
the allocated buffer pointer in req_complete_cb_data, and put the
osc_rdma_module pointer in that buffer as well.
Previously, osc_pt2pt was used with pml_cm which didn't have this
problem.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30967.
- Fix several typos is osc/rdma.
- Fix a locking issue in osc/sm that was caused by an incorrect
assumption about the semantics of opal_atomic_add_32.
- Always unlock the accumulation lock in osc/sm.
- The base of a processes shared memory window should be NULL if
the size is zero. Fixed.
cmr=v1.7.5:ticket=trac:4304
This commit was SVN r30853.
The following Trac tickets were found above:
Ticket 4304 --> https://svn.open-mpi.org/trac/ompi/ticket/4304
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
osc_pt2pt_data_move.c: In function 'ompi_osc_pt2pt_sendreq_recv_accum_long_cb':
osc_pt2pt_data_move.c:643:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
osc_rdma_data_move.c: In function 'ompi_osc_rdma_control_send_cb':
osc_rdma_data_move.c:1312:37: warning: variable 'header' set but not used [-Wunused-but-set-variable]
This commit was SVN r29092.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
request completion callback
* Use the completion callback pointer to remove all need for opal_progress
calls in the one-sided layer
This commit was SVN r24848.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
Somehow they got fixed in the pt2pt implementation, but not the RDMA
implementation. Thanks to Guillaume Thouvenin for finding this issue.
This commit was SVN r24188.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
update the remain_len field for the buffer.
This really fixes ticket #2532.
This commit was SVN r23706.
The following SVN revision numbers were found above:
r23649 --> open-mpi/ompi@f42c2a737f
