long-standing bugs (see trac ticket list below). They're currently
somewhat obscure bugs, but are becoming much more relevant in a world
where OpenFabrics devices fail and you replace them with a newer model
(i.e., the cluster is homogeneous... ''except'' for where you had to
replace one or two OpenFabrics devices, and the same model is no
longer available).
This commit includes a '''lengthy''' comment (that we spent a lot of
time writing!) about what exactly it does and does not do. The
previous code was rather short and '''incredibly''' subtle. The new
code is slightly longer, but is both much more explicit and much more
painstakingly documented.
This commit fixes multiple trac tickets. The real one that we fix is
#1707; the others are fixed as a side-effect. In short: fixing #1707
prevents Bad Things from happening later in the startup sequence.
Fixes trac:1707, #2164, #1574.
cmr:v1.4.2:reviewer=pasha
cmr:v1.5:reviewer=pasha
This commit was SVN r22592.
The following Trac tickets were found above:
Ticket 1707 --> https://svn.open-mpi.org/trac/ompi/ticket/1707
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
point, the event engine has been shut down until btl finalization is
done, so opal_progress in the wait loop is not an option - we have
to drain from inside the btl.
Clean up the looping structure for the finalize routine
Update copyrights.
This commit was SVN r21620.
This commit was SVN r21533.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r21524
(now works on both big and little endian machines)
* Be a little more flexible when looking for active devices in
btl_openib_component.c
* Add device name and port number to lots of verbose and help
messages
* Add a bunch of verbose messages to give insight into what is
occurring during all the CPC wireups
This commit was SVN r21418.
I just found that we have 2 place where we call for XRC domain
creation. First one in init_one_device() and second one prepare_device_for_use().
They have absolutely identical code, but the call in init_one_device() is useless
because on this stage we don't know about QP configuration and we don't know if we need
XRC at all. So I removing the duplicated code from init_one_device().
This commit was SVN r21235.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
and mo'bettah. Put in lengthy comments explaining what's going on.
We might still want to tweak this some more, but we can no longer get
IMB-EXT to hang with this new code anymore (e.g., even without eager
RDMA -- we discovered after the fact that the code in the v1.3.2
release will hang if eager RDMA is disabled).
Fixes trac:1890. Really.
This commit was SVN r21061.
The following Trac tickets were found above:
Ticket 1890 --> https://svn.open-mpi.org/trac/ompi/ticket/1890
_endpoint_post_send(), which could result in an infinite loop (see the
comment in the code).
This is part one of a proper fix; it's suitable for the v1.3 tree and
for an immediate release. Pasha and I plan to spend a little more
time and clean up this stuff properly, but it does not need to be
included in v1.3.2.
This commit was SVN r21047.
The following Trac tickets were found above:
Ticket 1890 --> https://svn.open-mpi.org/trac/ompi/ticket/1890
