1. create DLL A, export symbols of A, import nothing (A normally is OPAL)
should define _USRDLL , A_EXPORT
2. create DLL B, export symbols of B, import A.lib (B could be ORTE, OMPI or other ompi tools)
should define _USRDLL, B_EXPORT
3. create DLL C, import B.dll (C could be external libs or apps)
should define B_IMPORT
This commit was SVN r24016.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
do the right thing. They now properly return
the value after the update. This also fixes all warnings
reported by the Sun Studio compiler. George provided the
new assembly routines. I added some configure code to make
sure the compilers could handle it.
This fixes trac:2560.
This commit was SVN r23721.
The following Trac tickets were found above:
Ticket 2560 --> https://svn.open-mpi.org/trac/ompi/ticket/2560
be tested on function pointers and assigned accordingly,
instead of using the pre-processor in the header files.
A functional change is (re-) specifying __opal_attribute_noreturn__
on orte_errmgr_base_abort(): All modules in the errmgr framework
either use this function, or define their own abort function,
which sets __opal_attribute_noreturn__.
This attributes was taken out with the errmgr overhaul in r22872.
This commit was SVN r23689.
The following SVN revision numbers were found above:
r22872 --> open-mpi/ompi@e4f2d03d28
#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
* Remove OPAL_ERR_PAFFINITY_NOT_SUPPORTED; fit it into the generic
OPAL_ERR_NOT_SUPPORTED case.
* When odls_default detects that processor affinity is not supported,
it prints a specific message about it, and then it suppressed a
generic HNP help message that would normally follow it (i.e., it's
easier to have the "processor affinity is not supported" show_help
message last).
* Use some symbolic names in odls_default instead of fixed int's,
just for slight readability improvements in the code.
* Introduce orte_show_help_suppress(), which gives the ability to
suppress any future showings of any arbitrary show_help() message.
This is useful if you display message X and want to suppress
message Y. This suppression *only* works in environments where
orte_show_help() does coalescing.
This commit was SVN r23249.
It is okay to not have a paffinity module IF you aren't using paffinity anyway. So don't error out of MPI_Init because a paffinity module wasn't selected.
Cleanup error reporting in the odls default module to (once and for all!) eliminate messages originating in the fork'd process. Create some new error codes to allow us to pass enough info back to the parent process to provide useful error messages.
This commit was SVN r23106.
and opal_atomic_lifo_pop. Adds memory barriers to remove the race
condition
This commit was SVN r23014.
The following Trac tickets were found above:
Ticket 2355 --> https://svn.open-mpi.org/trac/ompi/ticket/2355
Remove the --enable-progress-threads option as this is no longer functional, and hardcode OPAL_ENABLE_PROGRESS_THREADS to 0.
Replace the --enable-mpi-threads option with --enable-mpi-thread-multiple as this is clearer as to meaning. This option automatically turns "on" opal thread support if it wasn't already so specified. If the user specifies --disable-opal-multi-threads --enable-mpi-thread-multiple, we will error out with a message
Add a new --enable-opal-multi-threads option that turns "on" opal thread support without doing anything wrt mpi-thread-multiple
This commit was SVN r22841.
to Eugene, Jeff, and Briand for the help. This patch is supposed to
fix several outstanding issues, notably the one on tickets #2043.
This commit was SVN r22324.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
C++ compiler in configure. If we have a C++ compiler, then the MPI
C++ bindings are built by default. If we don't have a C++ compiler,
then the MPI C++ bindings are not built by default.
--enable-mpi-cxx will now force an error if there is no C++ compiler
available. --disable-mpi-cxx (or the lack of a C++ compiler) will now
disable many of the C++ compiler checks in configure.
Note that there are a few items to clean up regarding the difference
between C's _Bool type and C++'s bool type. Right now, we assume that
they are the same. But they aren't, and they shouldn't be treated as
such. This cleanup will be forced in MPI-2.2 with the introduction of
the MPI_C_BOOL MPI datatype.
This commit was SVN r21755.
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
Studio compilers again. It has been broken since
1/14/2009 when some changes exposed a bug in autoconf
and how it handles support for the restrict keyword.
Basically, Sun Studio C supports the restrict keyword
but Sun Studio C++ does not.
I am also pursuing a fix with the autoconf folks, but
this change was needed to get things building again.
This commit was SVN r20351.
size. The correct way is to cast to an integer type that has the same length, and
then allow the compiler to upgrade to the read type.
This commit was SVN r19944.
but not anything in libc. Which causes an incorrect answer for
AC_CHECK_FUNCS. Work around that by also checking for the
#define.
This commit was SVN r18730.
to allow explicit grouping of hot functions into similar code
sections upon link-time. Should decrease TLB misses (iff the code-
section is really too large)...
Candidates for __opal_attribute_hot__ are MPI_Isend MPI_Irecv,
MPI_Wait, MPI_Waitall
Candidates for __opal_attribute_cold__ are MPI_Init, MPI_Finalize and
MPI_Abort...
This commit was SVN r18421.
* The opal_sys_timer_get_cycles() call was implemented for
Sparc v9 using inline assembly, but not in the assembly files.
This would only currently matter on Linux Sparc systems using
a compiler that didn't support inline assembly (not many of
those), but it should be there for completion.
* The linux timer component would always build on non-Alpha
platforms, rather than only building on platforms where
opal_sys_timer_get_cycles() was implemented. This would
only matter on a very narrow set of platforms that we don't
really support, but still, it could be more right. We now
only build the component on platforms where we have the
assembly call to get the cycle counter.
* Added a comment to opal/sys/timer.h to note that the linux
timer component needed to be updated if another platform was
added.
This should be harmless to commit. It will only really change
behaviors on platforms we don't have assembly support for, which
currently won't make it through configure. It really only matters
when (if?) we support atomic operations through libatomic_ops.
This commit was SVN r17887.