* Move ipv6comat.h code into opal_config_bottom.h and change into some
more intelligent testing of structures
* Change opal's if interface to use sockaddr instead of sockaddr_storage,
as the RFCs suggest we do
* Move the networking code in opal that isn't directly related to if
detection into net.h
* Add quicky function to get the port out of either a sockaddr_in
or sockaddr_in6, saving a bunch of code in the oob.
* Update TCP oob and btl with new interface
This commit was SVN r14679.
* Require Autoconf 2.60 or higher and remove some cruft
required for AC 2.59 or the AC 2.59 / AC 2.60 mix
* Remove a bunch of now unnecessary AC_SUBST calls
* Use the libtool-provided variables for the -I and
library to use when compiling against ltdl
Fixes trac:1000
This commit was SVN r14652.
The following Trac tickets were found above:
Ticket 1000 --> https://svn.open-mpi.org/trac/ompi/ticket/1000
via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
because the Sun Studio compiler did not recognize __const.
This commit fixes trac:1011.
This commit was SVN r14558.
The following Trac tickets were found above:
Ticket 1011 --> https://svn.open-mpi.org/trac/ompi/ticket/1011
- make opal_sockaddr2str() take a sockaddr_storage instead of a sockaddr_in6
so that it works for IPv4 and IPv6 addresses, and remove a whole bunch
of #ifs in the OOOB code.
- Fix a compiler warning in the TCP BTL due to run-time determined
array size by making it a dynamicly allocated array.
- Fix the unpacking code of IPv4 addresses when using IPv6 support, so
that the address is in the correct location (instead of in an IPv6
structure, use an IPv4 structure). Refs trac:1005.
This commit was SVN r14514.
The following Trac tickets were found above:
Ticket 1005 --> https://svn.open-mpi.org/trac/ompi/ticket/1005
This bug(?) become apparent due to the installdirs commit since these tools
were not finding the proper libraries since the paths were wonkey.
It all looks good now. :)
This commit was SVN r14461.
Protect the free and strdup values for replacing keyval pairs just as we do
below in the files for new keyval pairs.
In basic testing this seems to make everything work as it should again.
This commit was SVN r14460.
The following Trac tickets were found above:
Ticket 1002 --> https://svn.open-mpi.org/trac/ompi/ticket/1002
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
that makes sense or not, it is allowed and it is done). Remove the compiler
hint that the argument will never be NULL. Fixes a segfault in oob init
code when opal_argv_split() was called with a NULL first argument.
This commit was SVN r14440.
VXWorks, for example). Checked with George before committing this to
ensure that nothing broke on Windows -- he said it was ok.
This commit was SVN r14388.
Fix for memory corruption in the restarted process stack. This stemed from
the brute force method we were previously using. This commit fixes this by
using a lighter weight solution focused in the r2 BML instead of above the PML.
This is a more efficient and flexible solution, and it solves the original
problem.
In the process I pulled out the ft_event function in the tcp BTL and r2 BML
into a set of *_ft.[c|h] files just to keep any updates to these code paths
as isolated as possible to make merging easier on everyone.
This commit was SVN r14371.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
The following Trac tickets were found above:
Ticket 977 --> https://svn.open-mpi.org/trac/ompi/ticket/977
supported, but "q" was for long long. This isn't ANSI
C and causes a warning when using PRI?64 macros. We
don't support versions prior to OS X 10.3, so we dont'
need such backward compatibility. Instead, redefine
the macros to be "ll", which is ANSI C and doesn't
cause a compiler warning.
Fixes trac:868
This commit was SVN r14358.
The following Trac tickets were found above:
Ticket 868 --> https://svn.open-mpi.org/trac/ompi/ticket/868
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
__opal_attribute_nonnull__, __opal_attribute_warn_unused_result__,
__opal_attribute_malloc__, __opal_attribute_sentinel__ and
__opal_attribute_format__
This commit was SVN r14078.
- Add signal handler BLCR register (helps with debugging)
- ifdef out the cr_request_file section for checkpointing self.
There is a bug with the 0.4.2 version of BLCR such that this
does not handle moving checkpoint files around.
I'm following up with the BLCR folks on this one (and checking
the newest release).
This commit was SVN r14069.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
builds, so disable it there
* On 10.4.8 (and possibly others), siginfo is NULL in the signal
callback on 64 bit Intel builds, so account for that in the signal
callback.
This commit was SVN r14045.
This saves some memory for the constructors and destructors arrays of a
class by counting the constructors and destructors while we are counting
the cls_depth. And the reversion of the constructor array can now be done
without an extra loop.
This commit was SVN r13939.
allocated from mpool memory (which is registered memory for RDMA transports)
This is not a problem for a small jobs, but for a big number of ranks an
amount of waisted memory is big.
This commit was SVN r13921.
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
the dispatch function opal_atomic_cmpset_acq_xx was used to call
opal_atomic_cmpset_acq_32 would cause the compiler / linker to fix up a
jump address to be itself, leading to an infinite loop.
We're still looking into exactly what caused this, but during the
investigation into the hang, we determined that the compiler (both pathcc
and gcc) weren't always inlining both the call to opal_atomic_cmpset_acq_xx
and opal_atomic_cmpset_acq_32, meaning there was a function call in
opal_atomic_lock. The atomic lock will always be 32 bit, so there's no
need for the dispatch function, so might as well remove the dispatch
function that may or may not be inlined.
A bug fix that leads to potentially better performance. Gotta love the
few times that happens...
This commit was SVN r13651.
to flush all writes pending (ie, the data being protected) out of the memory
manager before we write the spinlock unlock. Only need a wmb instead of
full mb, which is at least slightly less intrusive. Also, after much
thought, no need for a memory barrier in init.
This commit was SVN r13649.
- Set ompi-specific autoconf cache-variables
- Implement one function to check for availability of an
attribute with the possibility for a cross-check.
- Do cross-checks for
__attribute__(format)
__attribute__(nonnull)
__attribute__(sentinel)
__attribute__(warn_unused_result)
- Grep the compilers warnings for keywords regarding ignored
attributes.
- Include also the no_instrument_function
This commit was SVN r13556.
Add new function opal_get_num_processors() that will return the number
of processors on the local host. Does the Right thing in POSIX
environments (to include a special case for OS X), and will shortly do
the Right Thing for Windows (this commit includes a change to
configure, so I wanted to get that in before the US workday -- the
Windows code can some shortly because it won't involve configury
changes).
This commit was SVN r13506.
The following Trac tickets were found above:
Ticket 853 --> https://svn.open-mpi.org/trac/ompi/ticket/853
The OMPI_HAVE_ATTRIBUTE flag is always set when the oldest attribute
is supported. But in all cases when the OMPI_HAVE_ATTRIBUTE is set and
one of the attributes is not supported the empty declaration is missing.
This commit was SVN r13390.
most common attributes. Useful attributes may be:
- optimization (pure, const, malloc--restrictness)
- data layout (packed)
- interface definition, API (deprecated, visibility, weak alias)
- compiler hint for code analysis and debugging (nonnull, format)
This commit was SVN r13369.
intended. In truth, any unique value will do, but he's right that
having a regular, recognizeable, repeatable value is probably much
better for debugging purposes.
This commit was SVN r13341.
and George on these refinements):
* Rename the static OBJ initializer macro to be
OPAL_OBJ_STATIC_INIT(class)
* Ensure that all static OBJ initializations get a refcount of 1
(doesn't ''really'' matter, since they're static, it should never
get to the point where the OBJ is DESTRUCTed, but more correct
nonetheless)
* Add a "magic number" to the OBJ when compiling with debug support.
The magic number does some rudimentary support to ensure that
you're operating on a valid OBJ (and fails an assertion if you're
not). Check to ensure that the memory contains the magic number
when performing actions of OBJ's. Also remove the magic number
when DESTRUCTing OBJs, so that if, for example, an OBJ is
DESTRUCTed more than once, we'll fail the magic number assert.
This commit was SVN r13338.
The following SVN revision numbers were found above:
r13227 --> open-mpi/ompi@96030de97b
r13228 --> open-mpi/ompi@c2e9075d29
comment explaining the patch in the patch.
Refs trac:574
This commit was SVN r13276.
The following Trac tickets were found above:
Ticket 574 --> https://svn.open-mpi.org/trac/ompi/ticket/574
* Need to install the help file whenever we install the binary, not when
we make the opal symlinks.
* Exit with non-zero status when language isn't supported
This commit was SVN r13139.
timers might natively return nanoseconds instead of microseconds, as is
the case on x86. Fixes an issue with really high shared memory latencies
on Intel macs
This commit was SVN r13038.
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
George wrote the initial patch, I extended it slightly and am responsible for all bugs found.
Refs trac:587
This commit was SVN r13023.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
* Make sure that the pval always writes to the correct portion of the
lval. This only matters on 32 bit big endian machines.
* On 32 bit machines when assigning to pval, the other 4 bytes of lval
weren't being written, which could lead to bogus data
We use macros so that there aren't casts all over the code and the pval
assignment can occur to the correct 4 bytes. Refs trac:587
This commit was SVN r12974.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
environment variable, so it's not so useful (arg!). Instead, get the
hostname during opal_init(). Don't want to call gethostname() during
the signal handler. While we're at it, only print the machine name
so that the output isn't so wide
Refs trac:538
This commit was SVN r12886.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
* Print out header that a signal was received
Refs trac:538
This commit was SVN r12884.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
* Have darwin backtrace code return an error when buffer() is
called, since it is not imnplemented
* Print out hostname & pid when giving signal information
* If backtrace_buffer() is implemented, use that instead of
backtrace_print() and prefix stacktrace with the hostname
* Make the signal information printed be more user friendly
* If we're using the backtrace_buffer() code, don't print
the last two functions (which will be show_stackframe()
then backtrace_buffer()) so that users won't keep thinking
the error occurred inside Open MPI (sneaky, yes...)
Refs trac:538
This commit was SVN r12883.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
process when creating a datatype from an internal description.
Refs trac:640
This commit was SVN r12877.
The following Trac tickets were found above:
Ticket 640 --> https://svn.open-mpi.org/trac/ompi/ticket/640
1. For OS's without the dirent.d_type field, we were potentially
not initializing a filename string. This could result in a
directory not being cleaned up.
2. Potential memory leaks in filename strings that were allocated.
Refs trac:678
This commit was SVN r12853.
The following Trac tickets were found above:
Ticket 678 --> https://svn.open-mpi.org/trac/ompi/ticket/678
the same time, remove some of the MPI-related options from OPAL:
- provide mechanism to change at runtime whether sched_yield() should
be called when the progress engine is idle
- provide mechanism for changing the rate at which the event engine
is called when there are "no" users of the event engine (ie, when
using MPI but not TCP)
- fix some function names in the progress engine to better match
their intended use (and remove MPI naming scheme)
- remove progress_mpi_enable / progress_mpi_disable because
we can now use the functions to set the sched_yield and
tick rate interfaces
- rename opal_progress_events() to opal_progress_set_event_flag()
because the first really isn't descriptive of what the function
does and I always got confused by it
This commit was SVN r12645.
whether they are prefixed with a double underscore or not.
__DARWIN_UNIX03 is defined on Tiger when compiling PPC 64 code, so
we can't use that.
Refs trac:575
This commit was SVN r12418.
The following Trac tickets were found above:
Ticket 575 --> https://svn.open-mpi.org/trac/ompi/ticket/575
renamed the register fields in the thread state structures. Support compiling
with either the old or new names, keying off the UNIX03 define (which is what
the 10.5 headers do).
Refs trac:450
This commit was SVN r12285.
The following Trac tickets were found above:
Ticket 450 --> https://svn.open-mpi.org/trac/ompi/ticket/450
possible things contained in the conditional like other rules are (for
example, a SOURCES rule in a conditional automatically has its files
added to the dist rules, even if that conditional isn't tru when
make dist occurs). So the man files weren't in the tarball.
Put the EXTRA_DIST with the files explicitly listed outside any conditionals
so the man pages always end up in the tarball.
This commit was SVN r12220.
provide one for the internals of Open MPI. For mpi.h, typedef MPI_Aint
either to ptrdiff_t or whatever we used as ptrdiff_t if that type doesn't
actually exist.
This commit was SVN r12212.
The following SVN revision numbers were found above:
r12146 --> open-mpi/ompi@8852c00c36
they might require special tools (not sure if sed with multiple -e
arguments is totally portable)
- ignore the opalcc.1 man page. Couldn't do this in the previous
man page commit (r12192) because I was removing opalcc.1 in that
commit.
This commit was SVN r12194.
The following SVN revision numbers were found above:
r12192 --> open-mpi/ompi@581a4b0a4e
- Only install opal{cc,c++} and orte{cc,c++} if configured with
--with-devel-headers. Right now, they are always installed, but
there are no header files installed for either project, so there's
really not much way for a user to actually compile an OPAL / ORTE
application.
- Drop support for opalCC and orteCC. It's a pain to setup all the
symlinks (indeed, they are currently done wrong for opalCC) and
there's no history like there is for mpiCC.
- Change what is currently opalcc.1 to opal_wrapper.1 and add some
macros that get sed'ed so that the man pages appear to be
customized for the given command.
- Install the wrapper data files even if we compiled with
--disable-binaries. This is for the use case of doing multi-lib
builds, where one word size will only have the library built, but
we need both set of wrapper data files to piece together to
activate the multi-lib support in the wrapper compilers.
This commit was SVN r12192.
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
I was running into where if a string in the argument list contains a printf
escape sequence, we would segfault. In particular, I was using opal_output
to print the environment and had something like:
LESSOPEN=|/usr/bin/lesspipe.sh %s
in my environment. So I called opal_output(0, "%s", environ[i]) and
got a segfault because the fprintf tried to expand the %s in the
environment variable
This commit was SVN r12094.
intall-exec-hook cases. This was accidently removed in r11773.
This commit was SVN r11954.
The following SVN revision numbers were found above:
r11773 --> open-mpi/ompi@c5cc1f0c1a
the data is in network byte order and we want it in host byte order so
we can modify it. The big issue, though, is that 127 is 0x7F, not 0x74,
so there was the possibility of false positives with this test...
This commit was SVN r11919.
remove requirements on .la files on wrapper scripts
Ticket: #374
extend compilers to support 32 bit and 64 bit in one version of the wrapper
Submitted by: Dan Lacher
Reviewed by: Rolf Vandevaart
This commit was SVN r11908.
install-exec-hook is not only wrong, it can cause ordering issues such
as trying to put sym links to man pages in directories that do not yet
exist.
This commit was SVN r11893.
__DARWIN_ALIGN_POWER define from the last release of the OS X compiler
toolchain. The bug in net/if.h, however, is still there. So look
for the hints that we're on a 64 bit Apple PowerPC instead.
* If we don't find a buffer size that works by 10MB, we're never
going to. So add some code to limit the buffer size we'll try
so that we don't fall into an infinite loop
* Detect errors in opal_ifcount in the oob init code
Refs trac:420
This commit was SVN r11825.
The following Trac tickets were found above:
Ticket 420 --> https://svn.open-mpi.org/trac/ompi/ticket/420
opal and orte/ompi man pages -- no need to make local copies of the
man page int he opal tree; just [un]install sym links in the mandir,
like orte/ompi.
This commit was SVN r11820.
* Make sure to AC_SUBST the backtrace CFLAGS so that the right flags
are passed to the component (especially -m64)
* Properly open / close the component. This isn't strictly necessary
to fix the bug, but was an oversight that should be fixed.
This commit was SVN r11806.
The following Trac tickets were found above:
Ticket 405 --> https://svn.open-mpi.org/trac/ompi/ticket/405
there is an exit path out of the loop
* Reformat assembly to match other platforms
* Update base file for non-inline assembly to match changes in
the inline version
This commit was SVN r11803.
the initialization in the start of the function is going to remain for
the life of the function is erroneous. Need to initialize before
using in the snprintf() call.
Refs trac:340
This commit was SVN r11781.
The following Trac tickets were found above:
Ticket 340 --> https://svn.open-mpi.org/trac/ompi/ticket/340
* Use $31 instead of mnemonic zero for the gcc inline
assembly test, as the GNU assembler doesn't like
zero, but both Tru64 and GNU assembler should be fine
with $31
* Disable Linux timer component on Alpha. The CPU timer
rolls over every 10 seconds or less, so it's kinda
worthless for our needs.
* Fix some escaping issues when local functions are
denoted with a $
* Remove C++ comments from the Alpha assembly.
* Add base assembly code for the non-inlined functions
on Alpha
This commit was SVN r11764.
- everything statically built (dynamically opened).
- OPAL, ORTE and OMPI static libraries and all the components
as dynamic files(DLL).
- everything as dynamic files (DLL).
This commit was SVN r11461.
opal_dirname have the same behavior all the time. It does not modify
the original string and it returns a freshly allocated string.
This commit was SVN r11443.
the BOOL type predefined on Windows in C does not match the C++ bool type
for the same compiler. One is an int when the other is a char.
Make sure we check for bool for all non C++ compilers.
This commit was SVN r11429.
versions of the thread lock functions to determine at runtime if a lock
is needed) to OMPI_ENABLE_PROGRESS_THREADS instead of
OMPI_HAVE_THREAD_SUPPORT. Opal only starts a thread when
OMPI_ENABLE_PROGRESS_THREADS is enabled, and ORTE never really starts
a thread that requires special locking considerations.
MPI_INIT would set opal_uses_threads to true if thread level was
greater than MPI_THREAD_SINGLE, but it would never decreast the
value of opal_uses_threads, meaning that we always enabled all that
locking if we did a threaded build, which isn't neccessary. Now
we do locking iff progress threads are enabled OR thread level
is above MPI_THREAD_SINGLE.
This commit was SVN r11390.
remaining changes are in event.c and event.h, plus everything in the
WIN32-Code directory. I still have to find a way to make it working on
Windows without these changes, but I have good hopes. However, the
the code in WIN32-Code will have to stay there as it's more stable
than the one provided by the libevent project.
This commit was SVN r11386.
as we can have multiple threads in the event library if there are multiple
MPI threads. Well, we could, once I fix the need for the lock in
opal_progress(), which should happen shortly. Anyway, we need to use the
same locking scheme throughout the code, and the device support was
already using the OPAL_THREAD__{lock,unlock} macros, which only go
active when we think there are multiple threads we care about.
Also, stop duplicating the OPAL_THREAD_SCOPED_LOCK macro's functionality
and use it in a bunch of places in the code.
This commit was SVN r11383.
functionality of libevent for Windows. Anyway, these functions are not
currently used in the Open MPI project, so it's safe to remove them from the
Windows library. But, they should be never used otherwise changes are
required.
This commit was SVN r11378.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
range of OS friendly path management functions, such as opal_basename
opal_dirname. They should always be used instead of basename and
dirname. There are several functions which allow us to create paths
that are compatible with the OS.
The OPAL_ENV_SEP define should be used (instead of ':') when a env
variable is splitted.
This commit was SVN r11336.
Windows version for the libevent. The one they provide is more than
innapropriate for what we need (without talking about the fact that
the code is just plain wrong).
This commit was SVN r11329.
One of the most important is the IOVBASE_TYPE which should be used
all over the places for casting to and from the iov_base field of
the iovec struct. The reason is because windows does not support
any kind of implicit conversion (not even through void*). All
conversions should be EXPLICIT.
This commit was SVN r11328.
environment variables.
- The HOME on Windows is called USERPROFILE.
- C++ compilers (at least on Windows) require explicit casts. Even going
through a void* does not help.
- Cleanup the Windows file name management.
- Always use opal_os_path to create OS friendly paths.
This commit was SVN r11311.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
So define the constant if it isn't already defined. Something else
includes stdio.h, which has a bunch of declarations that really
confuse non-GNU compilers, so be sure to include that one before
setting __USE_GNU.
refs trac:280
This commit was SVN r11265.
The following Trac tickets were found above:
Ticket 280 --> https://svn.open-mpi.org/trac/ompi/ticket/280
already set. This can annoy compilers that aren't GNUish
* __align is technically a reserved token and IBM XL appears to be doing
something with it that causes compile badness. So use a different
variable name.
refs trac:279
This commit was SVN r11264.
The following Trac tickets were found above:
Ticket 279 --> https://svn.open-mpi.org/trac/ompi/ticket/279
did pre-libevent update. The problem is that the behavior of
OPAL_EVLOOP_ONCE was changed by the OMPI team, which them broke things
during the update, so it had to be reverted to the old meaning of
loop until one event occurs. OPAL_EVLOOP_ONELOOP will go through the
event loop once (like EVLOOP_NONBLOCK) but will pause in the event
library for a bit (like EVLOOP_ONCE).
fixes trac:234
This commit was SVN r11081.
The following Trac tickets were found above:
Ticket 234 --> https://svn.open-mpi.org/trac/ompi/ticket/234
compiler, automatically disable the ptmalloc component. It seems that
optimization level -O2 or higher will cause the generated code to do
Bad Things (e.g., opalcc will segv). Upgrading to the Intel 9.1
compiler seems to fix the problem.
This closes ticket #227.
This commit was SVN r11076.
libevent-1.1a.
svn merge -r10917:11006 https://svn.open-mpi.org/svn/ompi/tmp/libevent-update
This commit was SVN r11022.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r10917
r11006
This commit was SVN r11021.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r10914
components to load:
- only allow the ^ to be the first character of the value
- if we find ^ elsewhere in the value, print an error and fail
This commit was SVN r10880.
than $(LN_S). This causes problems with with Windows and probably
elsewhere (re: #200). So use a slightly different trick to get the
right header selected for the MEMCPY and TIMER components.
* Using the same trick used to solve the AC_CONFIG_LINKS problem,
stop using a separate header file for direct calling in the
PML and MTL. This lets me remove some icky code in ompi_mca.m4
that was more fragile than I really liked.
This commit was SVN r10841.
Keeping the cache misses as low as possible is always a good approach.
The opal_list_t is widely used, it should be a highly optimized class.
The same functionality can be reached with one one sentinel instead
of 2 currently used.
I don't have anything against the STL version, but so far nothing can
compare with the Knuth algorithm. I replace the current implementation
with a modified version of the Knuth algorithm (the one described in
The Art of Computer Programming). As expected, the latency went down.
This commit was SVN r10776.
- orte-clean.c : check to see if the base session directory is empty
and delete it if it is.
- orte_universe_exists.c : Fix a down stread problem resulting from
George's r10718 commit. Don't use the 'fulldirpath' since
that is no longer guarenteed to be the absolute path
to the session directory. Construct this value outside of that
function from the prefix and frontend vars.
This commit was SVN r10741.
The following SVN revision numbers were found above:
r10718 --> open-mpi/ompi@47eef2e002
