On 32-bit architectures loads/stores of fast box headers may take
multiple instructions. This can lead to a data race between the
sender/receiver when reading/writing the sequence number. This can
lead to a situation where the receiver could process incomplete
data. To fix the issue this commit re-orders the fast box header to
put the sequence number and the tag in the same 32-bits to ensure they
are always loaded/stored together.
Fixes#473
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
fi_av_insert() is invoked with a context containing each endpoint
USNIC_NUM_CHANNELS times. If the address on that endpoint fails to
resolve / is unreachable / has some error, we'll therefore get
USNIC_NUM_CHANNELS error completions with that same endpoint. We
therefore only want to warn about the unreachability of (and
OBJ_RELEASE) that endpoint the *first* time.
Fixes CSCut46822.
It was setup in the PCI backend before filtering,
and partially updated after filtering in the core.
Only setup once correctly after filtering in the core.
(cherry picked from commit open-mpi/hwloc@9659653d24)
Conflicts:
tests/hwloc/linux/40intel64-2g2n4c+pci.output
tests/hwloc/xml/192em64t-12gr2n8c2t-distancegroups.xml
tests/hwloc/xml/192em64t-24n8c2t-distancegroups.xml
tests/hwloc/xml/192em64t-24n8c2t-nodistancegroups.xml
tests/hwloc/xml/24em64t-2n6c2t-pci.xml
tests/hwloc/xml/32em64t-2n8c2t-pci-normalio.xml
tests/hwloc/xml/96em64t-4n4d3ca2co-pci.xml
utils/hwloc/test-hwloc-compress-dir.input.tar.gz
utils/hwloc/test-hwloc-compress-dir.output.tar.gz
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
If super_set contains more allocated ulongs than sub_set,
we did not check the last ulongs.
We would return true instead of false when sub_set is
infinite while the last ulongs in super_set are not full.
This fixes tests/hwloc_bitmap_compare_inclusion on some platforms.
(cherry picked from commit open-mpi/hwloc@299e6e846f)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Otherwise we get spurious bits for crazy topologies such as 8em64t-2s2ca2c-buggynuma.output
Will make debug asserts easier.
(cherry picked from commit open-mpi/hwloc@546cd9330a)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Make sure we define complete cpuset/nodeset when we define groups' main cpuset/nodeset
during later insert of groups (for PCI hostbridges or distances).
Otherwise they may end up clearing child/parent complete sets which
suddenly become incoherent while they were fixed earlier.
Needed to fix allowed_nodeset meaning.
(cherry picked from commit open-mpi/hwloc@7c88d17add)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
When looking for PUs inside R_MAXSDL rads, some AIX 6.1 releases
return one first rad without any PU.
AIX 6.1 00F63F144C00 does (on quad-power7).
AIX 6.1 00CBAAC24C00 doesn't (on 16x power6).
So we can't assume rad #x contains PU #x. But we already have the right
code to fill the cpuset from the rad, so use that to obtain the PU os_index
as well.
Cannot be used to obtain NUMA node os_index since there's no way to directly
retrieve NUMA nodes from rads (mempools seem unrelated). Just keep using #rad
for NUMA nodes os_index and document that convention when converting back in
set_membind().
Thanks to Hendryk Bockelmann and Erik Schnetter for helping debugging.
(cherry picked from commit open-mpi/hwloc@60006c7b88)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Otherwise we'll have some NULL objects above, would be annoying.
No need to dig further, the distance matrix is likely buggy.
We still keep the inserted groups at this level (incomplete level)
because removing them is hard.
(cherry picked from commit open-mpi/hwloc@312a971ec9)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Commit 626129d2818693e62b83c1cfa2ba6e058e5bed66 fixed the hwloc
device/vendor numbers obtained from libpciaccess.
But the corresponding names are still retrieved from pciaccess numbers,
so fix these numbers inside pciaccess structures before retrieving the names.
(cherry picked from commit open-mpi/hwloc@85ea6e4acc)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Misc objects were used between system and machine in the past
but quickly got replaced with groups.
(cherry picked from commit open-mpi/hwloc@6c2aa6d1ea)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Misc are reserved for annotating the topology, the core
doesn't like merging them. Group is more appropriate.
(cherry picked from commit open-mpi/hwloc@3c47649591)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
hwloc_get_first_largest_obj_inside_cpuset() returns the largest/highest object,
but it could still have a child with the same cpuset.
So check children as well in case there's a matching NUMA node there.
(cherry picked from commit open-mpi/hwloc@57a1c4fbe4)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
When ignore_keep_structure is enabled, intermediate level can disappear
between parent and child, making the new child complete_cpuset smaller,
causing the child list to require a reorder just like in remove_ignored().
(cherry picked from commit open-mpi/hwloc@88afbe6b62)
Embed this related commit:
core: abstract out reorder_children(), needed when merging modifies the list of children
(cherry picked from commit open-mpi/hwloc@14db82d391)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
If object A contains B + I/O as children, we can "ignore" I/Os and still
try to merge A and B. We now do the same for Misc objects without cpusets
instead of I/Os.
This fixes a corner case when export/reimport to XML creates a slightly
different topology (making hwloc_insert_misc fail inside a Linux cgroup).
Thanks to Dave Love for reporting the problem.
Fixes#118
(cherry picked from commit open-mpi/hwloc@650371e115)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
When I/O are attached under a PU, removing the children's cpusets from
the parent cpuset doesn't give 0, it gives the PU cpuset.
The assertion fails on single-pu machines with I/O when --merge is given,
only one PU remains with I/O under it.
But if we insert Misc by cpuset under PU, it gives 0 as expected.
Fix the assertion accordingly.
Thanks to Thomas Van Doren for reporting the issue.
(cherry picked from commit open-mpi/hwloc@45c94c336d)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
hwloc_x86_discover() calls hwloc_look_x86() twice, which calls hwloc_have_x86_cpuid().
If everything gets inlined, the asm label inside hwloc_have_x86_cpuid()
is duplicated.
Use a local label with f annotation in jumps to avoid the problem.
Thanks to Thomas Van Doren for reporting the issue (found with gcc -m32).
(cherry picked from commit open-mpi/hwloc@50e447f5bc)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
x86: Not critical since BSDs that use this backend have no membind support,
but better fix it for uniformization.
(cherry picked from commit open-mpi/hwloc@a431361c7d)
OSF: Looks like nobody ever tried to play with memory binding on OSF/Tru64.
(cherry picked from commit open-mpi/hwloc@2d6c73356d)
Conflicts:
NEWS
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
At least some solaris enforce the need to #include X11/Xlib.h first.
Thanks to Siegmar Gross for reporting the issue.
(cherry picked from commit open-mpi/hwloc@005a7e89b6)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
tolower needs <ctype.h>
Thanks to Ralph Castain for reporting the failure.
(cherry picked from commit open-mpi/hwloc@038c372a58)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
strncasecmp() needs <strings.h>
Thanks to Pavan Balaji for reporting the failure.
(cherry picked from commit open-mpi/hwloc@37439c4801)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
