The original lock_all algorithm in osc/pt2pt sent a lock message to
each peer in the communicator even if the peer is never the target of
an operation. Since this scales very poorly the implementation has
been replaced by one that locks the remote peer on first communication
after a call to MPI_Win_lock_all.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes an issue that can occur if a target gets overwhelmed with
requests. This can cause osc/pt2pt to go into deep recursion with a stack
like req_complete_cb -> ompi_osc_pt2pt_callback -> start -> req_complete_cb
-> ... . At small scale this is fine as the recursion depth stays small but
at larger scale we can quickly exhaust the stack processing frag requests.
To fix the issue the request callback now simply puts the request on a
list and returns. The osc/pt2pt progress function then handles the
processing and reposting of the request.
As part of this change osc/pt2pt can now post multiple fragment receive
requests per window. This should help prevent a target from being overwhelmed.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
It is possible for the start call to complete the requests. For this
reason the module rdma_frag field should be filled in before start is
called. If the request completes the completion callback will reset
the rdma_frag field to NULL. Fixes a bug discovered by @tkordenbrock.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit expands the OPAL_THREAD macros to include 32- and 64-bit
atomic swap. Additionally, macro declararations have been updated to
include both OPAL_THREAD_* and OPAL_ATOMIC_*. Before this commit the
former was used with add and the later with cmpset.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit fixes a bug in the RDMA compare-and-swap implementation
that caused the origin value to always be written even if the compare
should have failed.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Need to increment the total size after checking the local offset not
before. This typo causes large allocations with MPI_Win_allocate() to
fail.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* mpi/start: fix bugs in cm and ob1 start functions
There were several problems with the implementation of start in Open
MPI:
- There are no checks whatsoever on the state of the request(s)
provided to MPI_Start/MPI_Start_all. It is erroneous to provide an
active request to either of these calls. Since we are already
looping over the provided requests there is little overhead in
verifying that the request can be started.
- Both ob1 and cm were always throwing away the request on the
initial call to start and start_all with a particular
request. Subsequent calls would see that the request was
pml_complete and reuse it. This introduced a leak as the initial
request was never freed. Since the only pml request that can
be mpi complete but not pml complete is a buffered send the
code to reallocate the request has been moved. To detect that
a request is indeed mpi complete but not pml complete isend_init
in both cm and ob1 now marks the new request as pml complete.
- If a new request was needed the callbacks on the original request
were not copied over to the new request. This can cause osc/pt2pt
to hang as the incoming message callback is never called.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* osc/pt2pt: add request for gc after starting a new request
Starting a new receive may cause a recursive call into the pt2pt
frag receive function. If this happens and the prior request is
on the garbage collection list it could cause problems. This commit
moves the gc insert until after the new request has been posted.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
* Remodel the request.
Added the wait sync primitive and integrate it into the PML and MTL
infrastructure. The multi-threaded requests are now significantly
less heavy and less noisy (only the threads associated with completed
requests are signaled).
* Fix the condition to release the request.
This commit fixes a bad synchronization detection bug that occurs when
mixing MPI_Win_fence() and MPI_Win_lock(). If no communication has
occurred in the fence epoch it is safe to just clear the all_sync
object (it was set up by fence).
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug that occurs when ranks are either not mapped
evenly or by something other than core.
Fixesopen-mpi/ompi#1599
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Before this commit, a same PML tag may be used for distinct
communications for long messages. For example, consider a condition
where rank A calls ```MPI_PUT``` targeting rank B and rank B calls
```MPI_GET``` targeting rank A simultaneously.
A PML tag for the ```MPI_PUT``` is acquired on rank A and is used
for the long-message communication from rank A to rank B.
A PML tag for the ```MPI_GET``` is acquired on rank B and is used
for the long-message communication from rank A to rank B.
These two tags may become a same value because they are managed
independently on each rank. This will cause a data corruption.
This commit separates the tag used in a single RMA communication
call, one for communication from an origin to a target, and one
for communication from a target to an origin. A "base" tag
is acquired using ```get_tag``` function and PML tag is caluculated
from the base tag by ```tag_to_target``` and ```tag_to_origin```
function.
Fix CID 1324726 (#1 of 1): Free of address-of expression (BAD_FREE):
Indeed, if a lock conflicts with the lock_all we will end up trying to
free an invalid pointer.
Fix CID 1328826 (#1 of 1): Dereference after null check (FORWARD_NULL):
This was intentional but it would be a good idea to check for
module->comm being non_NULL to be safe. Also cleaned out some checks
for NULL before free().
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes several bugs identified by @ggouaillardet and MTT:
- Fix SEGV in long send completion caused by missing update to the
request callback data.
- Add an MPI_Barrier to the fence short-cut. This fixes potential
semantic issues where messages may be received before fence is
reached.
- Ensure fragments are flushed when using request-based RMA. This
allows MPI_Test/MPI_Wait/etc to work as expected.
- Restore the tag space back to 16-bits. It was intended that the
space be expanded to 32-bits but the required change to the
fragment headers was not committed. The tag space may be expanded
in a later commit.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes several bugs identified by a new multi-threaded RMA
benchmarking suite. The following bugs have been identified and fixed:
- The code that signaled the actual start of an access epoch changed
the eager_send_active flag on a synchronization object without
holding the object's lock. This could cause another thread waiting
on eager sends to block indefinitely because the entirety of
ompi_osc_pt2pt_sync_expected could exectute between the check of
eager_send_active and the conditon wait of
ompi_osc_pt2pt_sync_wait.
- The bookkeeping of fragments could get screwed up when performing
long put/accumulate operations from different threads. This was
caused by the fragment flush code at the end of both put and
accumulate. This code was put in place to avoid sending a large
number of unexpected messages to a peer. To fix the bookkeeping
issue we now 1) wait for eager sends to be active before stating
any large isend's, and 2) keep track of the number of large isends
associated with a fragment. If the number of large isends reaches
32 the active fragment is flushed.
- Use atomics to update the large receive/send tag counters. This
prevents duplicate tags from being used. The tag space has also
been updated to use the entire 16-bits of the tag space.
These changes should also fixopen-mpi/ompi#1299.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds code to handle large unaligned gets. There are two
possible code paths for these transactions:
1) The remote region and local region have the same alignment. In
this case the get will be broken down into at most three get
transactions: 1 transaction to get the unaligned start of the region
(buffered), 1 transaction to get the aligned portion of the region,
and 1 transaction to get the end of the region.
2) The remote and local regions do not have the same alignment. This
should be an uncommon case and is not optimized. In this case a
buffer is allocated and registered locally to hold the aligned data
from the remote region. There may be cases where this fails (low
memory, can't register memory). Those conditions are unlikely and
will be handled later.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
If atomics are not globally visible (cpu and nic atomics do not mix)
then a btl endpoint must be used to access local ranks. To avoid
issues that are caused by having the same region registered with
multiple handles osc/rdma was updated to always use the handle for
rank 0. There was a bug in the update that caused osc/rdma to continue
using the local endpoint for accessing the state even though the
pointer/handle are not valid for that endpoint. This commit fixes the
bug.
Fixesopen-mpi/ompi#1241.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Optimizing put aggregation in the presence of threads will require a
redesign of the code. For now just ensure that put aggregation is
turned off when MPI_THREAD_MULTIPLE is enabled.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
A bus error occurs in sm OSC under the following conditions.
- sparc64 or any other architectures which need strict alignment.
- `MPI_WIN_POST` or `MPI_WIN_START` is called for a window created
by sm OSC.
- The communicator size is odd and greater than 3.
The lines 283-285 in current `ompi/mca/osc/sm/osc_sm_component.c` has
the following code.
```c
module->global_state = (ompi_osc_sm_global_state_t *) (module->segment_base);
module->node_states = (ompi_osc_sm_node_state_t *) (module->global_state + 1);
module->posts[0] = (uint64_t *) (module->node_states + comm_size);
```
The size of `ompi_osc_sm_node_state_t` is multiples of 4 but not
multiples of 8. So if `comm_size` is odd, `module->posts[0]` does
not aligned to 8. This causes a bus error when accessing
`module->posts[i][j]`.
This patch fixes the alignment of `module->posts[0]` by setting
`module->posts[0]` first.
NOTE: Building with external pmix *requires* that you also build with external libevent and hwloc libraries. Detect this at configure and error out with large message if this requirement is violated.
Closes#1204 (replaces it)
Fixes#1064
A previous commit updated the one-sided code to register the state
region only once. This created an issue when using the scratch lock
with fetching atomics. In this case on any rank that isn't local rank
0 the module->state_handle is NULL. This commit fixes the issue by
removing the scratch lock and using a fragment pointer instead.
Fixesopen-mpi/ompi#1290
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
