If we are aborting, then set the flags so the HNP directly sends an exit command to each daemon. Make it the halt_vm command so the remote daemon doesn't try to relay it, but instead just exits without waiting for its routed children to exit first.
cmr=v1.8.1:reviewer=jsquyres:subject=fix hangs due to abort prior to daemon wireup
This commit was SVN r31304.
add -mca base_env_list "var1=val1 var2=val2 ..." mca parameter that can be used in mca param files
or with -am app.conf mpirun commandline to set rank env variables with mca mechanism
fixed by Elena, reviewed by Miked
cmr=v1.8.1:reviewer=ompi-rm1.8
This commit was SVN r31302.
The last fix prevented a hang but had some cases where the results were
wrong. Fixed. Tested with armci, openmpi/ibm, openmpi/onesided.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31284.
It might be possible (don't know) for a datatype to made of a contiguous block
of a primitive datatype and have an lb. If this is ever the case the code
would have done the wrong thing. Add the lb in to be safe.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31283.
Discussed this with Manju and we decided to back this one out until a later time.
This reverts commit r31188 and closes trac:4435
This commit was SVN r31282.
The following SVN revision numbers were found above:
r31188 --> open-mpi/ompi@f1dd589092
The following Trac tickets were found above:
Ticket 4435 --> https://svn.open-mpi.org/trac/ompi/ticket/4435
There are differences between how active and passive messages are
accounted for in this component. Active message counts on the sender
side are set to zero before the control message is sent so we do not
have to add one to the expected number of messages or we end up
double counting the control message. This commit should fix that error.
Fixes regression in one-sided/test_rma1
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31281.
There were a couple of issues with the memory leak fixes and several more verbose
issues. This fixes those issues.
cmr=v1.8.1:ticket=trac:4473
This commit was SVN r31273.
The following Trac tickets were found above:
Ticket 4473 --> https://svn.open-mpi.org/trac/ompi/ticket/4473
This fixes more issues identified by armci. More issues still remain and fixes are
coming for those as well.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31272.
Also, since I put some of the macros for these silent/verbose rules up
in the top-level Makefile.man-page-rules file, I renamed it to
Makefile.ompi-rules.
I've had this sitting around for a while; now seems like as good a
time as any to commit it.
This commit was SVN r31271.
directory not the job's
This bug didn't affect the correctness of the vader results just the
cleanup. This commit removes an error message about removing a non-existent
file.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31265.
Thanks to ggouaillardet for finding and fixing these issues.
Closes trac:4460
cmr=v1.8.1:reviewer=manjugv
This commit was SVN r31264.
The following Trac tickets were found above:
Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
Also added some missing values and sentinels.
cmr=v1.8:ticket=trac:4470
This commit was SVN r31263.
The following SVN revision numbers were found above:
r31260 --> open-mpi/ompi@69036437b7
The following Trac tickets were found above:
Ticket 4470 --> https://svn.open-mpi.org/trac/ompi/ticket/4470
If ompi_modex_recv() fails with OPAL_ERR_DATA_VALUE_NOT_FOUND, it
simply means that the peer process did not put any usnic BTL modex
info -- it is not an error. So have the usnic BTL simply ignore that
peer (vs. disqualifying itself / treating this like a real error).
Refs trac:4442.
This commit was SVN r31258.
The following Trac tickets were found above:
Ticket 4442 --> https://svn.open-mpi.org/trac/ompi/ticket/4442
This commit should finish the work started for #869. Closing that ticket
with this commit.
Closes trac:869
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31257.
The following Trac tickets were found above:
Ticket 869 --> https://svn.open-mpi.org/trac/ompi/ticket/869
The semantics of the variable mpi_yield_when_idle are to call
opal_progress_set_yield_when_idle at MPI_Init. It would be difficult
to modify the old variable to support setting this parameter at
runtime. The fix is to add an additional parameter to opal:
opal_progress_yield_when_idle that directly sets the variable. This
variable is settable anytime and does not affect the semantics of
the old mpi_yield_when_idle variable.
Refs trac:193
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31255.
The following Trac tickets were found above:
Ticket 193 --> https://svn.open-mpi.org/trac/ompi/ticket/193
Add a lot more information about the --level CLI option, and the nine
levels.
Also remove some now-erroneous examples regarding --version.
cmr=v1.8:reviewer=rhc
This commit was SVN r31246.
in ompi_mtl_mxm_add_procs, define the ep_index variable only
for an older version of mxm.
submitted by Alina, reviewed by Mike.
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31245.
on some linux distro (sles11sp2) csh fails to parse $LS_COLORS and borks with error:
Unknown colorls variable `mh'.
The workaround is to unset LS_COLORS before calling to csh script
reviewed by Jeff
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31244.
The error doesn't prevent the user from running so there is no reason
to display it unless the user requested it (through coll_ml_verbose).
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31242.
Fix a one line bug when dealing with non-contiguous sends in prepare_src. Bug was
identified by the intel test suite.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31232.
the case fix in ompi_osc_base_process_op in r31204.
There are two cases that needed to be handled:
- The target is a simple datatype (contiguous block of a primitive
type) but the origin is not. In this case we still need to pack
the origin data but we can not rely on the convertor to do the
unpack (see r31204).
- Both the origin and target datatypes are simple datatypes. In this
case we can use ompi_op_reduce to do the accumulation without having
to pack the origin data.
cmr=v1.8:ticket=trac:4449
This commit was SVN r31231.
The following SVN revision numbers were found above:
r31204 --> open-mpi/ompi@949abe45cd
The following Trac tickets were found above:
Ticket 4449 --> https://svn.open-mpi.org/trac/ompi/ticket/4449
Fixed two bugs:
- Use module->comm NOT comm to get the CID for the shared memory backing
file. This fixes the case where there are multiple shared memory windows
at the same time.
- Remember to unlink the shared memory backing file.
Refs trac:4438
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31227.
The following Trac tickets were found above:
Ticket 4438 --> https://svn.open-mpi.org/trac/ompi/ticket/4438
This commit fixes two bugs:
- We were not correctly setting the lock type in the outstanding lock
for lock_all. This caused undefined behavior.
- flush_all was incorrectly checking for comm size - 1 lock acks but
comm size flush acks. This is the reverse of what was intended.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31226.
In most cases, bad messages received by the connectivty checker are
just dropped. However, in one specific code path, a bad packet caused
an abort. Doh!
This commit does two things:
1. Improve verbose messages for all these cases
1. Simply drop incoming messages that cannot be identified as ACKs or PINGs
Submitted by Jeff Squyres, reviewed by Dave Goodell.
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31225.
It is possible to get into a situation where a small accumulate operation
can not be completed because a large accumulate operation holds the lock.
In this case we may return from wait/flush/etc before the operation is
complete. To handle this case increment the expected incoming fragment
count when queuing an accumulate operation and increment the incoming
fragment count after processing the accumulate operation.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31224.
