- Use opal hash table instead of list for group lookup.
- Code cleanup/refactoring. Group cache is now a part
of the proc_group.
Signed-off-by: Alex Mikheev <alexm@mellanox.com>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit eliminates the old opal_atomic_bool_cmpset functions. They
have been replaced by the opal_atomic_compare_exchange_strong
functions.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the atomic compare-and-swap functions to indicate
the return value. This is in preperation for adding support for a
compare-and-swap that returns the old value. At the same time the
return type has been changed to bool.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
+ The sshmem verbs component will disqualify itself if this verb isn't
present on the build host.
+ In case where support was requested but not found, don't stop the
build - continue without this component.
Signed-off-by: Alina Sklarevich <alinas@mellanox.com>
Convert to F77 notation and split into two (shorter) lines.
Also, make usage of the SHMEM_MAX_NAME_LEN definition, by moving
that first.
Signed-off-by: Rainer Keller <rainer.keller@hft-stuttgart.de>
before this fix, mca_spml_ucx_component_open was using
oshmem_num_procs() to set the value of params.estimated_num_eps for UCX.
The oshmem_num_procs() function uses oshmem_group_all which will be
initialized after the call to mca_spml_ucx_component_open and therefore,
cannot be used there.
Signed-off-by: Alina Sklarevich <alinas@mellanox.com>
though there are no C++ bindings for oshmem, we need C++ wrappers
since a C compiler might not be able to compile a C++ source.
the C++ wrappers are :
- shmemc++ / oshc++
- shmemcxx / oshcxx
- shmemCC / oshCC (on case sensitive filesystems)
also add the examples/hello_oshmem_cxx.cc example
Thanks Bert Wesarg for bringing this to our attention
Fixesopen-mpi/ompi#2097
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
This module was always intended to be a proof of concept, and was far
from complete. If/when someone implemented F08 descriptor support for
the mpi_f08 module, this commit can either be restored or used as
reference material.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Fallback to the regular pages if huge page allocation is set to auto
and it was not possible to allocate requested amount of memory with
the hugepages.
Signed-off-by: Alex Mikheev <alexm@mellanox.com>
There was a typo in the shmem_g c11 generic interface
in shmem.h.in
Thanks to @nspark for reporting the problem and
specifying the fix.
Fixes#3968
Signed-off-by: Howard Pritchard <hppritcha@gmail.com>
the 'hostname' command might not be available on some platforms
such as Fedora Core 26, so mimick config/libtool.m4 and fallback
to 'uname -n' if needed
Refs. #3680
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Hostname and PID are output as a message prefix in many places in
our code. Their printf-formats were either `[%s:%d]` or `[%s:%05d]`.
This commit changes `[%s:%d]` to `[%s:%05d]`. The latter was more
widely used in our code (including OPAL output system and the signal
handler).
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
This commit expands the effect of the MCA parameter `opal_abort_delay`
to the OPAL signal handler. This allows attaching of a debugger on
segmentation fault etc. before quitting the job.
The sleep code is moved to the `opal_delay_abort` function from the
`ompi_mpi_abort` and `oshmem_shmem_abort` functions for code cleanup.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
rename ompi/mpi/fortran/base/strings.h so it does not get pulled
when /usr/include/strings.h is expected.
Refs open-mpi/ompi#3639
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
The expected sequence of events for processing info during object creation
is that if there's an incoming info arg, it is opal_info_dup()ed into the obj
at obj->s_info first. Then interested components register callbacks for
keys they want to know about using opal_infosubscribe_infosubscribe().
Inside info_subscribe_subscribe() the specified callback() is called with
whatever matching k/v is in the object's info, or with the default. The
return string from the callback goes into the new k/v stored in info, and
the input k/v is saved as __IN_<key>/<val>. It's saved the same way
whether the input came from info or whether it was a default. A null return
from the callback indicates an ignored key/val, and no k/v is stored for
it, but an __IN_<key>/<val> is still kept so we still have access to the
original.
At MPI_*_set_info() time, opal_infosubscribe_change_info() is used. That
function calls the registered callbacks for each item in the provided info.
If the callback returns non-null, the info is updated with that k/v, or if
the callback returns null, that key is deleted from info. An __IN_<key>/<val>
is saved either way, and overwrites any previously saved value.
When MPI_*_get_info() is called, opal_info_dup_mpistandard() is used, which
allows relatively easy changes in interpretation of the standard, by looking
at both the <key>/<val> and __IN_<key>/<val> in info. Right now it does
1. includes system extras, eg k/v defaults not expliclty set by the user
2. omits ignored keys
3. shows input values, not callback modifications, eg not the internal values
Currently the callbacks are doing things like
return some_condition ? "true" : "false"
that is, returning static strings that are not to be freed. If the return
strings start becoming more dynamic in the future I don't see how unallocated
strings could support that, so I'd propose a change for the future that
the callback()s registered with info_subscribe_subscribe() do a strdup on
their return, and we change the callers of callback() to free the strings
it returns (there are only two callers).
Rough outline of the smaller changes spread over the less central files:
comm.c
initialize comm->super.s_info to NULL
copy into comm->super.s_info in comm creation calls that provide info
OBJ_RELEASE comm->super.s_info at free time
comm_init.c
initialize comm->super.s_info to NULL
file.c
copy into file->super.s_info if file creation provides info
OBJ_RELEASE file->super.s_info at free time
win.c
copy into win->super.s_info if win creation provides info
OBJ_RELEASE win->super.s_info at free time
comm_get_info.c
file_get_info.c
win_get_info.c
change_info() if there's no info attached (shouldn't happen if callbacks
are registered)
copy the info for the user
The other category of change is generally addressing compiler warnings where
ompi_info_t and opal_info_t were being used a little too interchangably. An
ompi_info_t* contains an opal_info_t*, at &(ompi_info->super)
Also this commit updates the copyrights.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
ompi_communicator_t, ompi_win_t, ompi_file_t all have a super class of type opal_infosubscriber_t instead of a base/super type of opal_object_t (in previous code comm used c_base, but file used super). It may be a bit bold to say that being a subscriber of MPI_Info is the foundational piece that ties these three things together, but if you object, then I would prefer to turn infosubscriber into a more general name that encompasses other common features rather than create a different super class. The key here is that we want to be able to pass comm, win and file objects as if they were opal_infosubscriber_t, so that one routine can heandle all 3 types of objects being passed to it.
MPI_INFO_NULL is still an ompi_predefined_info_t type since an MPI_Info is part of ompi but the internal details of the underlying information concept is part of opal.
An ompi_info_t type still exists for exposure to the user, but it is simply a wrapper for the opal object.
Routines such as ompi_info_dup, etc have all been moved to opal_info_dup and related to the opal directory.
Fortran to C translation tables are only used for MPI_Info that is exposed to the application and are therefore part of the ompi_info_t and not the opal_info_t
The data structure changes are primarily in the following files:
communicator/communicator.h
ompi/info/info.h
ompi/win/win.h
ompi/file/file.h
The following new files were created:
opal/util/info.h
opal/util/info.c
opal/util/info_subscriber.h
opal/util/info_subscriber.c
This infosubscriber concept is that communicators, files and windows can have subscribers that subscribe to any changes in the info associated with the comm/file/window. When xxx_set_info is called, the new info is presented to each subscriber who can modify the info in any way they want. The new value is presented to the next subscriber and so on until all subscribers have had a chance to modify the value. Therefore, the order of subscribers can make a difference but we hope that there is generally only one subscriber that cares or modifies any given key/value pair. The final info is then stored and returned by a call to xxx_get_info.
The new model can be seen in the following files:
ompi/mpi/c/comm_get_info.c
ompi/mpi/c/comm_set_info.c
ompi/mpi/c/file_get_info.c
ompi/mpi/c/file_set_info.c
ompi/mpi/c/win_get_info.c
ompi/mpi/c/win_set_info.c
The current subscribers where changed as follows:
mca/io/ompio/io_ompio_file_open.c
mca/io/ompio/io_ompio_module.c
mca/osc/rmda/osc_rdma_component.c (This one actually subscribes to "no_locks")
mca/osc/sm/osc_sm_component.c (This one actually subscribes to "blocking_fence" and "alloc_shared_contig")
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Conflicts:
AUTHORS
ompi/communicator/comm.c
ompi/debuggers/ompi_mpihandles_dll.c
ompi/file/file.c
ompi/file/file.h
ompi/info/info.c
ompi/mca/io/ompio/io_ompio.h
ompi/mca/io/ompio/io_ompio_file_open.c
ompi/mca/io/ompio/io_ompio_file_set_view.c
ompi/mca/osc/pt2pt/osc_pt2pt.h
ompi/mca/sharedfp/addproc/sharedfp_addproc.h
ompi/mca/sharedfp/addproc/sharedfp_addproc_file_open.c
ompi/mca/topo/treematch/topo_treematch_dist_graph_create.c
ompi/mpi/c/lookup_name.c
ompi/mpi/c/publish_name.c
ompi/mpi/c/unpublish_name.c
opal/mca/mpool/base/mpool_base_alloc.c
opal/util/Makefile.am
* updating naming convention for the arguments in order to ensure
that the name aligns with an actual meaning of the argument
* remove local variable references in the macro
* adding volatile for the poll variables
Signed-off-by: Pavel Shamis (Pasha) <pasharesearch@gmail.com>
Per a prior commit, the presence of "hwloc.h" can cause ambiguity when
using --with-hwloc=external (i.e., whether to include
opal/mca/hwloc/hwloc.h or whether to include the system-installed
hwloc.h).
This commit:
1. Renames opal/mca/hwloc/hwloc.h to hwloc-internal.h.
2. Adds opal/mca/hwloc/autogen.options to tell autogen.pl to expect to
find hwloc-internal.h (instead of hwloc.h) in opal/mca/hwloc.
3. s@opal/mca/hwloc/hwloc.h@opal/mca/hwloc/hwloc-internal.h@g in the
rest of the code base.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
As we changed the ABI (forcing a major release), we can limit
the size of the predefined communicators by moving the collective
structure outside the communicator. This might have a minimal,
but unnoticeable, impact on performance. This approach has been
discussed during the January 2017 devel meeting.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
in this context, AMD64 really means amd64 or em64t, so let's
rename this into X86_64 in order to avoid any confusion
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
The hook is called from memheap when memory range
is going to be allocated by smalloc(), realloc() and others.
ucx spml uses this hook to call ucp_mem_advise in order to speedup
non blocking memory mapping.
Signed-off-by: Alex Mikheev <alexm@mellanox.com>
Do not call component's init function until the component has been
selected.
Use mca_base_select() instead of the custom component selection code.
Signed-off-by: Alex Mikheev <alexm@mellanox.com>
By default use mmap() to allocate memory for the symmetric heap.
It is safer and more portable choice than sysv and verbs.
Signed-off-by: Alex Mikheev <alexm@mellanox.com>
Reasons for removal are:
- the function is only used by the shmem_lock code
- only a subset of the function is used by the shmem_lock
- for the general case the function is not correct
Signed-off-by: Alex Mikheev <alexm@mellanox.com>
calls, which means that the operation was successfully started but not
immediately completed. This is a "good" return code that should not be handled
as an error.
Signed-off-by: Pavel Shamis (Pasha) <pasharesearch@gmail.com>
