Environments are supposed to provide the PMIX_NODE_RANK - if they don't,
we can probably safely assume the same as local rank. Protect against a
few other values that might not be provided.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Made a couple vars static if they didn't look like they were used
more than one place, and added prefixes to a few.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
With Open MPI 5.0, the decision was made to stop building
3rd-party packages, such as Libevent, HWLOC, PMIx, and PRRTE as
MCA components and instead 1) start relying on external libraries
whenever possible and 2) Open MPI builds the 3rd party
libraries (if needed) as independent libraries, rather than
linked into libopen-pal.
This patch moves libevent from an MCA framework to a stand-alone
library built outside of OPAL. A wrapper in opal/util is provided
to minimize the unnecessary changes in the rest of the code. When
using the internal Libevent, it will be installed as a stand-alone
libevent.a, instead of bundled in OPAL. Any pre-installed version
of Libevent at or after 2.0.21 is preferred over the internal
version.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
MPI-4 is finally cleaning up its language: an MPI "exception" does not
actually exist. The only thing that exists is an MPI "error" (and
associated handlers). This commit replaces all relevant uses of the
word "exception" with "error". Note that this is still applicable in
versions of the MPI standard less than MPI-4.0 (indeed, nearly all the
cases fixed in this commit are just changes to comments, anyway).
One exception to this is the Java bindings, where there's an
MPIException class. In hindsight, it probably should have been named
MPIError, but changing it now would break anyone who is using the Java
bindings.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
default
And other streamlining of aborting behavior.
Signed-off-by: Aurélien Bouteiller <bouteill@icl.utk.edu>
Remove OMPI_COMM_ERRORS and use NOHANDLE macros instead.
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
route unbound errors to self error handler
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
Do not raise the error handler from within components
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
- Remove a duplicate "Configure host" output line
- No longer show the OPAL version. Since OPAL has never separated
into its own project, its version is always the same as Open MPI.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
mpi-next)
Signed-off-by: Aurélien Bouteiller <bouteill@icl.utk.edu>
Ordering must match fortran definition index for errhandlers, and we
don't want to change the old ones.
Signed-off-by: Aurélien Bouteiller <bouteill@icl.utk.edu>
Deprecate the current OMPI-specific MPI_Info key definitions for
MPI_Comm_spawn and replace them with their PMIx equivalents. Issue a
deprecation/conversion warning as this is done. Also issue deprecation
warnings for options such as "ompi_non_mpi" that are no longer used.
Handle both cases where the user might pass either the PMIx attribute
name itself (e.g., "PMIX_MAPBY") or the string value of the attribute
(e.g., PMIX_MAPBY, which translates to "pmix.mapby"). This can only be
done for PMIx v4 and above, so protect that code.
Silence a couple of Coverity warnings and add a test along the way.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Consolidate the ompi_process_info and opal_process_info structs to
remove duplicate storage and conversion issues. Unwind some interweaving
of include files using opal.h. Silence a couple of warnings.
For now, set the arch to local if PMIX_ARCH is not found.
Signed-off-by: Ralph Castain <rhc@pmix.org>
adding PMIX_NUMA_RANK info to process metadata so that the local NUMA
rank can be accessed through the opal_process_info object.
Signed-off-by: Nikola Dancejic <dancejic@amazon.com>
Do some code cleanup in the connect/accept code. Ensure that the OMPI
layer has access to the PMIx identifier for the process. Add macros for
converting PMIx names to/from strings. Cleanup a few of the simple test
programs. Add a little more info to a btl/tcp error message.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Add a framework to support different types of threading models including
user space thread packages such as Qthreads and argobot:
https://github.com/pmodels/argobotshttps://github.com/Qthreads/qthreads
The default threading model is pthreads. Alternate thread models are
specificed at configure time using the --with-threads=X option.
The framework is static. The theading model to use is selected at
Open MPI configure/build time.
mca/threads: implement Argobots threading layer
config: fix thread configury
- Add double quotations
- Change Argobot to Argobots
config: implement Argobots check
If the poll time is too long, MPI hangs.
This quick fix just sets it to 0, but it is not good for the
Pthreads version. Need to find a good way to abstract it.
Note that even 1 (= 1 millisecond) causes disastrous performance
degradation.
rework threads MCA framework configury
It now works more like the ompi/mca/rte configury,
modulo some edge items that are special for threading package
linking, etc.
qthreads module
some argobots cleanup
Signed-off-by: Noah Evans <noah.evans@gmail.com>
Signed-off-by: Shintaro Iwasaki <siwasaki@anl.gov>
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
OMPI can only support PMIx v3 and above. PRRTE requires at least PMIx
v4, so protect against the case where OMPI is built against an external
PMIx v3.
Fix check of PMIx_Init return code for singleton operations.
Ensure that the PMIx framework gets properly opened.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Extend the PMIx modex recv macros to cover the full set of
immediate/optional combinations. If PMIx_Init cannot reach a server,
then declare the MPI proc to be a singleton.
Provide full support for info values via PMIx
Catch all the values used in the "info" area of OMPI using data
available from PMIx instead of via envars. Update PMIx and PRRTE to sync
with their capabilities.
PMIx
- ensure cleanup of fork/exec children
- fix bug in gds/hash that left app info off of list
PRRTE
- fix multi-app bugs
- port setup_child logic from orte
- OMPI env changes
- set app->first_rank
- ensure common hostname across prun, prte, and pmix
- Fix "nolocal" support
Silence a warning from btl/vader
Signed-off-by: Ralph Castain <rhc@pmix.org>
The fence logic in MPI_Init got messed up somehow such that we were
always executing a fence, which is not desirable. The logic is supposed
to be:
* if async fence is requested and we are not collecting data, then do
not fence at all
* if async fence is requested and we are collecting data, then execute
the fence in the background - wait for completion at the end of MPI_Init.
* if async fence is not requested, then execute a blocking fence at that
point, collecting data as directed. Note that we cannot actually do a
blocking fence as we need to cycle the event library via opal_progress
as the PMIx progress thread is tied to the OMPI event base.
Signed-off-by: Ralph Castain <rhc@pmix.org>
OpenPMIx fills in a variety of info when it detects that we are in
singleton mode. Best way of detecting it is to look for the "singleton"
at the beginning of the returned nspace.
Make the modex recvs optional so we don't bounce up to the server and
then to the host trying to retrieve job-level info that must be given to
us at job start.
Signed-off-by: Ralph Castain <rhc@pmix.org>
If someone gives us a namespace that doesn't easily translate to an
integer, we have to create a mechanism for working around the
disconnect. PRRTE has been updated to give us a flag so we know we were
"natively" launched. If we don't see it, then fall back to generating a
hash of the nspace as our jobid. We then have to translate back/forth
between nspace and jobid using a lookup table.
Probably not the right long-term solution, but hopefully helps get us
thru for a bit.
Includes update of PRRTE pointer
Signed-off-by: Ralph Castain <rhc@pmix.org>
Fix a couple of spots in OMPI to resolve warnings. The one in comm_cid
in particular may be responsible for some/all of the comm_spawn issues
as it was passing an incorrect pointer to a macro, thus causing memory
corruption.
Update PRRTE and PMIx to deal with v3/v4 differences.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Will be replaced by PRRTE. Ensure that OMPI and OPAL layers build
without reference to ORTE. Setup opal/pmix framework to be static.
Remove support for all PMI-1 and PMI-2 libraries. Add support for
"external" pmix component as well as internal v4 one.
remove orte: misc fixes
- UCX fixes
- VPATH issue
- oshmem fixes
- remove useless definition
- Add PRRTE submodule
- Get autogen.pl to traverse PRRTE submodule
- Remove stale orcm reference
- Configure embedded PRRTE
- Correctly pass the prefix to PRRTE
- Correctly set the OMPI_WANT_PRRTE am_conditional
- Move prrte configuration to the end of OMPI's configure.ac
- Make mpirun a symlink to prun, when available
- Fix makedist with --no-orte/--no-prrte option
- Add a `--no-prrte` option which is the same as the legacy
`--no-orte` option.
- Remove embedded PMIx tarball. Replace it with new submodule
pointing to OpenPMIx master repo's master branch
- Some cleanup in PRRTE integration and add config summary entry
- Correctly set the hostname
- Fix locality
- Fix singleton operations
- Fix support for "tune" and "am" options
Signed-off-by: Ralph Castain <rhc@pmix.org>
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
The opal_gethostname() function provides a more robust mechanism
to retrieve the hostname than gethostname(), which can return
results that are not null-terminated, and which can vary in its
behavior from system to system.
opal_gethostname() just returns the value in opal_process_info.nodename;
this is populated in opal_init_gethostname() inside opal_init.c.
-Changed all gethostname calls in opal subtree to opal_gethostname
-Changed all gethostname calls in orte subtree to opal_gethostname
-Changed all gethostname calls in ompi subdir to opal_gethostname
-Changed all gethostname calls in oshmem subdir to opal_gethostname
-Changed opal_if.c in test subdir to use opal_gethostname
-Changed opal_init.c to include opal_init_gethostname. This function
returns an int and directly sets opal_process_info.nodename per
jsquyres' modifications.
Relates to open-mpi#6801
Signed-off-by: Charles Shereda <cpshereda@lanl.gov>
Use the PVAR ctx to save the SPC index, so that no lookup nor
restriction on the SPC vars position is imposed.
Make sure the PVAR are always registered.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
This is so when a debugger attaches using MPIR, it can step out of this stack back into main.
This cannot be done with certain aggressive optimisations and missing debug information.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Co-authored-by: Jeff Squyres <jsquyres@cisco.com>
in schizo/ompi, sets the new OMPI_MCA_mpi_oversubscribe environment
variable according to the node oversubscription state.
This MCA parameter is used to set the default value of the
mpi_yield_when_idle parameter.
This two steps tango is needed so the mpi_yield_when_idle setting
is always honored when set in a config file.
Refs. open-mpi/ompi#6433
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
... and add `MPI_COMPLEX4`.
This commit changes values of existing `OMPI_DATATYPE_MPI_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OMPI internal code.
On the other hand, `ompi_datatype_t::id` values of existing datatypes
are not changed and 73 is newly assigned to for `MPI_COMPLEX4` to
retain ABI compatibility.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This commit updates the entire codebase to use specific opal types for
all atomic variables. This is a change from the prior atomic support
which required the use of the volatile keyword. This is the first step
towards implementing support for C11 atomics as that interface
requires the use of types declared with the _Atomic keyword.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This function is only used in ompi_spc.c and is hence declared as static.
Remove its prototype from the header file in order to silence compiler warnings who will typically consider ompi_spc_get_count() as a declared but not defined function.
Fixesopen-mpi/ompi#5279Fixesopen-mpi/ompi#5273
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
