The way the gni btl is currently coded,
it will run completely out of gas on KNL at
123 processes/node. Since there are bound to be
those who try to run a MPI process/hyperthread
on KNL nodes, the fma sharing mode needs to be requested.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Add PMIx 2.0
Remove PMIx 1.1.4
Cleanup copying of component
Add missing file
Touchup a typo in the Makefile.am
Update the pmix ext114 component
Minor cleanups and resync to master
Update to latest PMIx 2.x
Update to the PMIx event notification branch latest changes
The rdma_disconnect function specifies that both the server and client
should call rdma_disconnect. The code was not calling rdma_disconnect
on an endpoint if the event came before the endpoint finalization.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Before dynamic add_procs the openib_btl_size_queues was called exactly
once for non-dynamic jobs. Now the function is called on each new
connection so the calculation was wrong. Re-wrote the function to
correctly calculate the CQ size and only attempt to adjust the CQ if
the requested size has changed. This fixes a bug when using the openib
btl on psm2 hardware that is caused by the time needed to resize a
CQ. The overhead was causing udcm to timeout and fail.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This fixes https://github.com/open-mpi/ompi/issues/1732: i.e., the
case where the outer project has its own check for
<valgrind/valgrind.h>, but also supplements CPPFLAGS (to find
Valgrind's header files) before doing that check.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Ideally, we would tell OMPI to disable autoconf's caching of our
valgrind check result so that its check gets the right result after
adding CPPFLAGS. Not sure if we can do that.
For now, just disable our Valgrind code in embedded mode.
This will keep the x86 backend enabled under Valgrind but
it will auto-disable itself when finding identical APIC ids anyway
(because CPUID returns same outputs for all PUs).
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Fixesopen-mpi/ompi#1732
(cherry picked from commit open-mpi/hwloc@8b44fb1c81)
This commit fixes a programming error when using an aries nic. The
documentation of ugni shows that only the local alignment restriction
for get was lifted on aries. There is still a remote address alignment
restriction.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a programming error when using an aries nic. The
documentation of ugni shows that only the local alignment restriction
for get was lifted on aries. There is still a remote address alignment
restriction.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for Cray Aries atomic operations. This
includes 32-bit and floating point support.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit add support for more atomic operations and type. The
operations added are logical and, logical or, logical xor, swap, min,
and max. New types are 32-bit int by using the
MCA_BTL_ATOMIC_FLAG_32BIT flag, 64-bit float by using the
MCA_BTL_ATOMIC_FLAG_FLOAT flag, and 32-bit float by using both
flags. Floating point numbers are supported by packing the number in
as an int64_t or int32_t. We will update the btl interface in the
future to make this less confusing.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Before dynamic add_procs support was committed to master we called
add_procs with every proc in the job. The XRC code in the openib btl
was taking advantage of this and setting the number of work queue
entries (WQE) based on all the procs on a remote node. Since that is
no longer the case we can not simply increment the sd_wqe field on the
queue pair. To fix the issue a new field has been added to the xrc
queue pair structure to keep track of how many wqes there are total on
the queue pair. If a new endpoint is added that increases the number
of wqes and the xrc queue pair is already connected the code will
attempt to modify the number of wqes on the queue pair. A failure is
ignored because all that will happen is the number of active send work
requests on an XRC queue pair will be more limited.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The original VADER_MAX_ADDRESS was tunned for x86_64 platforms only.
For non x86_64 platforms we can use XPMEM_MAXADDR_SIZE.
Signed-off-by: Pavel Shamis (Pasha) <pasharesearch@gmail.com>
This commit reduces the overhead of calling the ugni progress
function. It does the following:
- Check for new connections once every eight calls.
- Do not call remote smsg progress unless we are connected to at
least one remote peer.
- Do not call rdma progress unless at least one rdma fragment is
outstanding.
- Check endpoint wait list size before obtaining a lock.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit reduces the default exclusivity so that btl/scif is not
used for send/recv over other shared memory transports.
Fixesopen-mpi/ompi#1712
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Our checks and the ones of libevent are somewhat flawed.
If adding multiple "-framework" to CXXFLAGS or CFLAGS, we strip
the keyword from the command-line, not good.
libevent however assumes plain gcc without testing properly
that the compiler supports -Wno-deprecated-declarations.
The OPAL_CMA_NEED_SYSCALL_DEFS is always defined/set to 0 or 1. Therefore
instead of checking if the macro is defined, we have to look at the value
itself.
Signed-off-by: Pavel Shamis (Pasha) <pasharesearch@gmail.com>
Take another shot at untangling the spaghetti
orterun: fix for command line parsing
orte-submit calls opal_init_util () before parsing out MCA command line
options (-mca, -am, etc). This prevents mpirun from setting opal MCA
variables for some frameworks as well as the MCA base. This is because
when a framework is opened all of its variables are set to read-only.
Eventually we want to lift this restriction on some MCA variables but
since -mca is affected we must parse out the MCA command line options
before opal_init_util(). This commit fixes the bug by adding a new
option to opal_cmd_line_parse (ignore unknown option) so orte-submit
can pre-parse the command line for MCA options.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Minor cleanups to avoid releasing/recreating the cmd line
Remove contrib/windows/
Merge hwlocXYZ/hwloc/README-ompi.txt back into hwlocXYZ/README-ompi.txt instead of having both.
Add README.txt in new automake-required directory contrib/systemd/
Keep the following patches applied since they are not in 1.11.3
linux: actually enable libudev based on the result of AC_CHECK_LIB
(cherry picked from open-mpi/hwloc@9549fd59af)
configure: check the actual may_alias syntax that we use
(cherry picked from open-mpi/hwloc@0ab7af5e90)
This commit fixes several bugs in the registration cache code:
- Fix a programming error in the grdma invalidation function that can
cause an infinite loop if more than 100 registrations are
associated with a munmapped region. This happens because the
mca_rcache_base_vma_find_all function returns the same 100
registrations on each call. This has been fixed by adding an
iterate function to the vma tree interface.
- Always obtain the vma lock when needed. This is required because
there may be other threads in the system even if
opal_using_threads() is false. Additionally, since it is safe to do
so (the vma lock is recursive) the vma interface has been made
thread safe.
- Avoid calling free() while holding a lock. This avoids race
conditions with locks held outside the Open MPI code.
Fixesopen-mpi/ompi#1654.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Update external as well
Revise the change: we still need the MPI_Barrier in MPI_Finalize when we use a blocking fence, but do use the "lazy" wait for completion. Replace the direct logic in MPI_Init with a cleaner macro
WRAPPER_EXTRA flags are checked *before* the POST_CONFIG macro is
invoked. So set them in the main CONFIG macro.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
xlc 13.1.0 crashes because of our may_alias attributes in nolibxml.c
on Power7. libxml.c and nolibxml.c are the only may_alias users for now,
so change our configure check to match the actual code using it.
Thanks to Paul Hargrove for reporting and debugging the issue,
and providing the patch.
https://www.open-mpi.org/community/lists/devel/2016/05/18918.php
(cherry picked from open-mpi/hwloc@0ab7af5e90)
Per discussion on the mailing list and with IBM, remove the AIX timer
code (since AIX is no longer supported).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit disables the linux patcher component due to a limitation
in loader patching. While this component is effective in patching
calls made within Open MPI and by the application it fails to hook
calls made within glibc. This means the munmap call made by free is
not correctly hooked. Until this problem can be resolved this
component will remain disabled. If it can't be resolved this component
should probably be removed.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The table of contents (TOC) code only appears to only apply to
ppc64. The code was incorrectly assuming the existence of the TOC on
ppc32. This commit updates the necessary code to only apply to ppc64.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a compile/link issue caused by vader. The vader btl
was using OPAL_THREAD_ADD64 to increment a counter which may not be
available on 32-bit systems. Changed to use OPAL_THREAD_ADD_SIZE_T
which will be 64-bit or 32-bit depending on the system.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
ebx can not be clobbered when using -fPIC so save and restore the
register instead of allowing it to be clobbered.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
instead of doing AC_CHECK_HEADERS+AC_CHECK_LIB and only using the result of the former.
Thanks to Paul Hargrove for reporting the issue (OMPI build with -m32).
(cherry picked from open-mpi/hwloc@9549fd59af)
This commit fixes a compilation issue with some versions of exp
verbs. In some cases struct ibv_exp_device_attr does not have either
the exp_atom or exp_atomic_cap fields. It is fine to drop one check
and fall back to the non-exp attribute check on the other.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Add a feature check for clflush before trying to use the clflush
instruction. As far as I can tell there is no equivalent before the
SSE2 instruction set.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The function signature of mremap on BSD (NetBSD, FreeBSD) differs from
the linux version. Added support for the BSD style of mremap.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a compile error when the system has mremap but not
MREMAP_FIXED. In this case we do not care about the value of
new_address as the argument does not exist.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
In some rare cases when a process receives the connect ack while
locally updating the peer endpoint structure, we could drop the
incomming connect ack due to the fact that the send handler is
protected with a try lock (on the endpoint) and our initial send
event was not persistent. Making the send event persistent solves
all issues.
Rather than have a stub function for the pmix fence_nb
operation, just set to NULL. Causes fewer problems.
Fixes#1597Fixes#1527
Signed-off-by: hppritcha <howardp@lanl.gov>
This commit fixes a race between a thread calling the tcp btl's
add_procs and a thread processing an incomming connection. The race
occured because the add_procs thread adds a newly created proc object
to the hash table *before* the object is fully initialized. The
connection thread then attempts to use the object before the endpoints
array on the object has beeen allocation. The fix is to only add the
proc to the hash table after it has been completely initialized.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes an error in the failure path of leave_pinned. When
the rcache tries to enable leave_pinned but leave_pinned was not
specifically requested (opal_leave_pinned == -1) the code was
erroneously printing an error and returning NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The opal_mem_hooks_release_hook does not have const on the pointer
(though it probably should). This commit eliminates a warning by
casting away the const until opal_mem_hooks_release_hook is updated to
use const.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This is complicated stuff: add some comments so that future
maintainers have some rationale to understand the way things have been
done.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Define OPAL_MAXHOSTNAMELEN to be either:
(MAXHOSTNAMELEN + 1) or
(limits.h:HOST_NAME_MAX + 1) or
(255 + 1)
For pmix code, define above using PMIX_MAXHOSTNAMELEN.
Fixup opal layer to use the new max.
Signed-off-by: Karol Mroz <mroz.karol@gmail.com>
The math for checking the number of QPs and CQs per usNIC/VF was
incorrect, allowing you to run MPI processes even when usNICs (i.e.,
VIC VFs) had fewer QPs and CQs than were necessary. This led to a
confusing error later when fi_enable(3) failed (because we lazily
create QPs). Fixing the math here ensure that we actually print a
helpful error message telling the user specifically what is wrong.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
These macros should really be named OPAL_SUMMARY_*; they're used in
all projects, and therefore should be in the lowest later project (OPAL).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Fix CID 1358512: Error handling issues (NEGATIVE_RETURNS):
C libraries usually handle read (-1, ...) fine but it is safer to
avoid calling read with a negative handle. Added negative file
descriptor check.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Because of the removal of the linux memory component it is no longer
necessary to initialize the memory component in opal_init(). This
commit moves the initialization to the creation of the first rcache
component.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes bugs that can cause crashes and memory corruption
when the mremap hook is called. The problem occurs because of the
ellipses (...) in the mremap intercept function. The ellipses cover
the optional new_addr argument on Linux. This commit removes the
ellipses and adds an explicit 5th argument.
This commit also adds a hook for shmdt. The code only works on Linux
at the moment as it needs to read /proc/self/maps to determine the
size of the shared memory segment.
Additionally, this commit removes the mmap hook. There is no
apparent benefit for detecting mmap(..., PROT_NONE, ...) and it
seems to cause problems when threads are in use.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit removes the ptmalloc2 memory hooks. This is necessary in
order to support lazy registration of memory hooks. A feature that is
not supported by the ptmalloc hooks but is supported by the new
patcher hooks.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a framework to abstract runtime code patching.
Components in the new framework can provide functions for either
patching a named function or a function pointer. The later
functionality is not being used but may provide a way to allow memory
hooks when dlopen functionality is disabled.
This commit adds two different flavors of code patching. The first is
provided by the overwrite component. This component overwrites the
first several instructions of the target function with code to jump to
the provided hook function. The hook is expected to provide the full
functionality of the hooked function.
The linux patcher component is based on the memory hooks in ucx. It
only works on linux and operates by overwriting function pointers in
the symbol table. In this case the hook is free to call the original
function using the function pointer returned by dlsym.
Both components restore the original functions when the patcher
framework closes.
Changes had to be made to support Power/PowerPC with the Linux
dynamic loader patcher. Some of the changes:
- Move code necessary for powerpc/power support to the patcher
base. The code is needed by both the overwrite and linux
components.
- Move patch structure down to base and move the patch list to
mca_patcher_base_module_t. The structure has been modified to
include a function pointer to the function that will unapply the
patch. This allows the mixing of multiple different types of
patches in the patch_list.
- Update linux patching code to keep track of the matching between
got entry and original (unpatched) address. This allows us to
completely clean up the patch on finalize.
All patchers keep track of the changes they made so that they can be
reversed when the patcher framework is closed.
At this time there are bugs in the Linux dynamic loader patcher so
its priority is lower than the overwrite patcher.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit makes it possible to set relative priorities for
components. Before the addition of the patched component there was
only one component that would run on any system but that is no longer
the case. When determining which component to open each component's
query function is called and the one that returns the highest priority
is opened. The default priority of the patcher component is set
slightly higher than the old ptmalloc2/ummunotify component.
This commit fixes a long-standing break in the abstration of the
memory components. ompi_mpi_init.c was referencing the linux malloc
hook initilize function to ensure the hooks are initialized for
libmpi.so. The abstraction break has been fixed by adding a memory
base function that calls the open memory component's malloc hook init
function if it has one. The code is not yet complete but is intended
to support ptmalloc in 2.0.0. In that case the base function will
always call the ptmalloc hook init if exists.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for runtime binary patching. The support is
broken down into two parts: util/opal_patcher.[ch] which contains the
functionality for runtime patching of symbols, and mca/memory/patcher
which patches the various symbols needed to provide support for memory
hooks. This work is preliminary and is based off work donated by IBM.
The patcher code is disabled if dlopen is disabled.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
https://github.com/pmix/master/pull/71
Have OMPI's current version of pmix120 nicely fail in case of
too long sun_path (longer than 108 or in case of OSX 103 chars).
And have OMPI return proper error messages with hints how to
amend.
This comit adds code that sets the fragment reg_cnt to 1 when sending
the completion message for an eager get. Without this the btl will
either hang or abort.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Added mca parameter to turn progress thread on/off
Add a flag to check if we have btl progress thread.
Added macro for ob1 matching lock.
Update the AUTHORS file.
All BTL-only operations (basically all data movements
with the exception of the matching operation) can now
be handled for the TCP BTL by a progress thread.
The reference counting was broken which led PMIx_Finalize
to release resources early. This fixes the "use after free" scenarios
that I encountered.
(based on commit pmix/master@abfaa4c)
This reverts commit open-mpi/ompi@f7257a8310.
Ensure that we properly cleanup the session directory tree. Prior code had issues with symlinks, especially if the file that the link points to was already removed as we traverse the tree. Also found that the dirent checks for directory type weren't fully portable, and so fall back to the stat-based approach which is known to be portable.
Fix singularity singletons by detecting we are in a container and properly setting the pmix selection to pick the isolated component. Remove a stale restriction blocking use of the sm btl
This commit brings the scif btl up to date with changes made on master
to rework the mpool and rcache frameworks.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit uses the new flag "enumerator" to support comma-delimited
lists of flags for both the btl and btl atomic flags. After this
commit is is valid to specify something like -mca btl_foo_flags
self,put,get,in-place. All non-deprecated flags are supported by the
enumerator.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a new type of enumerator meant to support flag
values. The enumerator parses comma-delimited strings and matches
each string or value to a list of valid flags. Additionally, the
enumerator does some basic checks to see if 1) a flag is valid in the
enumerator, and 2) if any conflicting flags are specified.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds the data necessesary for supporting dynamic add_procs
to the rdma message (opal_process_name_t). The endpoint lookup
function has been updated to match the code in udcm.
Closesopen-mpi/ompi#1468.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1345825 (1 of 1): Dereference before null check (REVERSE_INULL):
ib_proc should not be NULL in this case. Removed the check and added a
check for NULL after OBJ_NEW.
CID 1269821 (1 of 1): Dereference null return value (NULL_RETURNS):
I labeled this one as a false positive (which it is) but the code in
question could stand be be cleaned up.
Fix CID 1356424 (1 of 1): Argument cannot be negative (NEGATIVE_RETURNS):
While trying to silence another Coverity issue another was
flagged. Protect the close of fd with if (fd >= 0).
CID 70772 (1 of 1): Dereference null return value (NULL_RETURNS):
CID 70773 (1 of 1): Dereference null return value (NULL_RETURNS):
CID 70774 (1 of 1): Dereference null return value (NULL_RETURNS):
None of these are errors and are intentional but now that we have a
list release function use that to make these go away. The cleanup is
similar to CID 1269821.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1356358: Null pointer dereferences (REVERSE_INULL):
flist->fl_mpool can no longer be NULL. Removed the conditional.
Fix CID 1356357: Resource leaks (RESOURCE_LEAK):
Added the call to free the hints array.
Fix CID 1356356: Resource leaks (RESOURCE_LEAK):
This is a false error but it is safe to call close (-1) so just always
call close.
Fix CID 1356354: Control flow issues (MISSING_BREAK):
Fix CID 1356353: Control flow issues (MISSING_BREAK):
Add comments that indicate the fall-through is intentional.
Fix CID 1356351: Null pointer dereferences (FORWARD_NULL):
Fix potential SEGV if the page_size key is malformed.
Fix CID 1356350: Error handling issues (CHECKED_RETURN):
Add (void) to indicate that we do not care about the return code of
sscanf in this case.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
+ Added an mca parameter to allow connecting processes from different
subnets. Its current default value is 'false' - don't allow, to keep the
current flow the way it is now.
+ rmdacm: when calling ibv_query_gid, use the gid index from
btl_openib_gid_index.
This means we need not check for jemalloc in the configure script for
this component. Removing this.
In some machines having the TLS option on can cause errors in
opening this component. --disable-tls while configuring jemalloc.
Please look for instructions for installing jemalloc as a static
library linked directly into memkind in CONTRIBUTING file
github.com/memkind/memkindw
This commit rewrites both the mpool and rcache frameworks. Summary of
changes:
- Before this change a significant portion of the rcache
functionality lived in mpool components. This meant that it was
impossible to add a new memory pool to use with rdma networks
(ugni, openib, etc) without duplicating the functionality of an
existing mpool component. All the registration functionality has
been removed from the mpool and placed in the rcache framework.
- All registration cache mpools components (udreg, grdma, gpusm,
rgpusm) have been changed to rcache components. rcaches are
allocated and released in the same way mpool components were.
- It is now valid to pass NULL as the resources argument when
creating an rcache. At this time the gpusm and rgpusm components
support this. All other rcache components require non-NULL
resources.
- A new mpool component has been added: hugepage. This component
supports huge page allocations on linux.
- Memory pools are now allocated using "hints". Each mpool component
is queried with the hints and returns a priority. The current hints
supported are NULL (uses posix_memalign/malloc), page_size=x (huge
page mpool), and mpool=x.
- The sm mpool has been moved to common/sm. This reflects that the sm
mpool is specialized and not meant for any general
allocations. This mpool may be moved back into the mpool framework
if there is any objection.
- The opal_free_list_init arguments have been updated. The unused0
argument is not used to pass in the registration cache module. The
mpool registration flags are now rcache registration flags.
- All components have been updated to make use of the new framework
interfaces.
As this commit makes significant changes to both the mpool and rcache
frameworks both versions have been bumped to 3.0.0.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Add primitive magic number and version checking in the connectivity
checker protocol. These checks doesn't *guarantee* to we won't get
false PINGs and ACKs, but they do significantly reduce the possibility
of interpretating random incoming fragments as PINGs or ACKs.
The btl_recv.h:lookup_sender() function uses the hashed ORTE proc name
to determine the sender of the packet. With add_procs_cutoff>0, the
usnic BTL may not have knowledge of all the senders.
Until the usNIC BTL can be adjusted to do something like the
openib/ugni BTLs (i.e., use opal_proc_for_name() to lookup unknown
sender proc names), set MCA_BTL_FLAGS_SINGLE_ADD_PROCS, which means
that ob1 will only all add_procs() once -- with all the procs in it.
Also in this commit, adapt the connectivity checker to not rely on
knowing all the senders (which is a bit easier than adapting the main
BTL send path): the receiving connectivity agent will simply echo back
the same PING message (which contains the sender's IP address+UDP
port) back to the sender without checking that it knows who the sender
is. If the sender receives the echoed PING back on the expexted
interface, it will find a match in the pending pings list. If the
sender receives the echoed PING back an unexpected interface, a match
will not be found, and the incoming PING message will be dropped.
Fixesopen-mpi/ompi#1440
This commit fixes an inconsistency between btl_openib_receive_queues,
btl_openib_max_send_size and btl_openib_eager_limit. Before this
commit if the ini file specified a set of default receive queues that
happen to not contain one large enough for the default max_send_size
of eager_limit users would see an error like:
WARNING: The largest queue pair buffer size specified in the
btl_openib_receive_queues MCA parameter is smaller than the maximum
send size (i.e., the btl_openib_max_send_size MCA parameter), meaning
that no queue is large enough to receive the largest possible incoming
message fragment. The OpenFabrics (openib) BTL will therefore be
deactivated for this run.
Local host: somehost
Largest buffer size: 65536
Maximum send fragment size: 131072
This commit adds code that detects the source of the max_send_size and
eager_limit values and sets either or both of them to the size
supported by the largest queue pair if both 1) the value is larger
than the largest queue pair size, and 2) the value was not set by the
user or a MCA configuration file.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds two m4 macros: OPAL_SUMMARY_ADD, OPAL_SUMMARY_PRINT.
OPAL_SUMMARY_ADD adds an item to a section in the summary. For example
OPAL_SUMMARY_ADD([[Transports]],[[Foo]],...,[yes]) will add the
following to the summary:
Transports
-----------------------
Foo: yes
With this commit two sections are added: Transports, Resource Managers.
The OPAL_SUMMARY_PRINT macro is called after AC_OUTPUT and prints out
some information about the build (version, projects, etc) and then
the summarys sections. It will additionally print a warning if
internal debugging is enabled.
Example output:
Open MPI configuration:
-----------------------
Version: 3.0.0 a1
Build Open Platform Abstration project: yes
Build Open Runtime project: yes
Build Open MPI project: yes
Build Open SHMEM project: no
MPI C++ bindings (deprecated): no
MPI Fortran bindings: mpif.h, use mpi, use mpi_f08
Debug build: yes
Transports
-----------------------
Cray uGNI (Gemini/Aries): no
Intel Omnipath (PSM2): no
KNEM Shared Memory: no
Linux CMA IPC: no
Mellanox MXM: no
Open UCX: no
OpenFabrics libfabric: no
OpenFabrics Verbs: no
portals4: no
QLogic Infinipath (PSM): no
tcp: yes
XPMEM Shared Memory: no
Resource Managers
-----------------------
Cray Alps: no
Grid Engine: no
LSF: no
Slurm: yes
Torque: yes
INTERNAL DEBUGGING IS ENABLED. DO NOT USE THIS BUILD FOR PERFORMANCE MEASUREMENTS!
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit fixes several threading bugs:
- Add an additional lock to the btl_base_endpoint_t structure to lock
the list of pending frags. This allows the progress function to
attempt to send pending frags without needing to drop/reaquire the
lock. This should provide a small improvement in performance and
fixes a potential race between adding an removing items from the
pending list.
- Ensure fast boxes are only set up once by updating the send count
using atomics when needed and do not set the fast box buffer
pointer until the fast box is set up.
Closesopen-mpi/ompi#1408
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* provide a more reliable way of determining that a process is a singleton by leveraging the schizo framework. Add new components for slurm, alps, and orte to detect when we are in a managed environment, and if we have been launched by mpirun or a native launcher. Set the correct envars to control ess and pmix selection in each case.
* change the relative priority of the pmix120 and pmix112 components to make pmix120 the default
* fix singleton comm-spawn by correctly setting the num_apps field of the orte_job_t created by the daemon - this fixes a segfault in register_nspace on newly created daemons
* ensure orterun doesn't propagate any ess or pmix directives in its environment
* Cleanup a few valgrind issues and memory leaks
* Fix a race condition that prevented the client from completing notification registrations (missing thread shift)
* Ensure the shizo/alps component detects launch by mpirun
This commit fixes a bug that can occur when communicating via XRC to
peers on the same node. UDCM was not saving the SRQ numbers on the
loopback endpoint (which shares its ib_addr info with all local peers)
so any messages to local peers use an invalid SRQ number.
Fixesopen-mpi/ompi#1383
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This bug fixes two issue with the ib_addr lock:
- The ib_addr lock must always be obtained regardless of
opal_using_threads() as the CPC is run in a seperate thread.
- The ib_addr lock is held in mca_btl_openib_endpoint_connected when
calling back into the CPC start_connect on any pending
connections. This will attempt to obtain the ib_addr lock
again. Since this is not a performance-critical part of the code
the lock has been changed to be recursive.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug that occurs when attempting a get or put
operation on an endpoint that is not already connected. In this case
the remote_srqn may be set to an invalid value as the rem_srqs array
on the endpoint is not populated. This commit moves the usage of the
rem_srqs array to the internal put/get functions where it is
guaranteed this array is populated.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
