OMPI header cannot be included in OPAL source code, hence removed it.
Fixes: (740b636db) btl/openib: Disqualify rdmacm CPC if
MPI_THREAD_MULTIPLE.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
- replace MAXHOSTNAMELEN with hardcoded 1024.
unlike Linux, Solaris #define MAXHOSTNAMELEN in <netdb.h>,
so use a hard coded value to keep the test simpl
- stdout cannot be assigned on Solaris, so use freopen instead
(back-ported from upstream commit pmix/master@a63f6e53f4)
this is a convenience macro similar to the PMIX_LIST_FOREACH macro,
that can be used to iterate on all the key/value pairs of a pmix_hash_table_t
(back-ported from upstream commit pmix/master@349971c68c)
We only support running with libfabric v1.3 or greater. So it's safe
to remove the legacy/adaptive cq_readerr() behavior.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
There are critical usnic libfabric AV insert bugs before v1.3, so
don't allow any version prior to v1.3 at run time (still allow
*compiling* with earlier versions, though, since the ABI guarantees
allow us to compile with an earlier libfabric and run with a later
libfabric).
Switch to using fi_version() to check the version (instead of calling
fi_getinfo()) as a potentially lighter-weight / simpler solution.
This allows us to only call fi_getinfo() once.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The (effective) "+42" computation was, in fact, the incorrect answer
in this case (gasp!).
We should just take the max_msg_size from the command (which came from
the libfabric endpoint max_msg_size attribute in the client) and
subtract off the max header size: 68 (which is explained in the
comment). This will result in a "large" message size which is likely
slightly smaller than the MTU, but still right up near the MTU, and
therefore good enough.
Note: the old computation (i.e., -(68-42)) worked fine when we asked
for Libfabric API v1.1 because the usnic provider would return a
max_msg_size that was already less than the MTU due to FI_PREFIX
behavior shenanigans. Once we started asking for Libfabric API v1.4,
the usnic Libfabric provider started returning (MTU + prefix_size),
and the -(68-42) computation started giving a value that was over the
MTU. This caused sendto() on the connectivity checker UDP socket
to fail.
This commit also removes an old/misleading comment.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* Add a configure time option to rename libmpi(_FOO).*
- `--with-libmpi-name=STRING`
* This commit only impacts the installed libraries.
Internal, temporary libraries have not been renamed to limit the
scope of the patch to only what is needed.
For example:
```shell
shell$ ./configure --with-libmpi-name=wookie
...
shell$ find . -name "libmpi*"
shell$ find . -name "libwookie*"
./lib/libwookie.so.0.0.0
./lib/libwookie.so.0
./lib/libwookie.so
./lib/libwookie.la
./lib/libwookie_mpifh.so.0.0.0
./lib/libwookie_mpifh.so.0
./lib/libwookie_mpifh.so
./lib/libwookie_mpifh.la
./lib/libwookie_usempi.so.0.0.0
./lib/libwookie_usempi.so.0
./lib/libwookie_usempi.so
./lib/libwookie_usempi.la
shell$
```
theses three pmix components use the same class name,
declare it as static so Open MPI can be built with --disable-dlopen
Thanks Limin Gu for the report
The rdmacm CPC in the openib BTL is not thread safe. The rdmacm CPC
should disqualify itself (instead of failing in random ways) if
MPI_THREAD_MULTIPLE is the thread level.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
This patch is based on the "RFC: Reenabling the TCP BTL over local
interfaces (when specifically requested)". It removes the hardcoded
exception for the local devices that has been enforced by the
TCP BTL. Instead, we exclude the local interface only via the
exclude MCA (both IPv4 and IPv6 local addresses are already in the
default if_exclude), which is also the behavior currently described in
our README file.
pmix_progress_thread_finalize() invokes libevent event_base_free,
so all libevent stuff cannot be used after.
Hence, pmix_client_globals.myserver must be PMIX_DESTRUCT'ed
before invoking pmix_progress_thread_finalize()
pmix1_value_unload() was added a "key" argument which is unused,
and pmix1_value_unload() was sometimes invoked with two arguments instead of three.
since the "key" argument is unused, simply remove it from the
subroutine prototype and calls.
the LT_* macros do overwrite the enable_dlopen variable,
so it must be tested and saved before invoking LT_INIT.
delay the invokation of the LT_* macros and use the
PMIX_ENABLE_DLOPEN_SUPPORT variable to figure out whether
--disable-dlopen was invoked
This commit fixes an abort during finalize because pending events were
removed from the list twice.
References #2030
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
We commonly see messages on the users list where a peer has hung up
because it has crashed. Instead of having just a BTL_ERROR message,
make this a real opal_show_help() message that tells the user that the
peer unexpectedly hung up, and they should look into *why* that peer
hung up.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
It looks like one help message was accidentally pasted in the middle
of another. Disentangle the two messages from each other, and
slightly tweak the one message to say that the job may also crash (in
addition to hanging).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit prevents the connection code from trying to connect an
endpoint if the directed datagram has been posted but not received.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The xlc compiler seems to behave in a different way that gcc when it
comes the inline asm. There were two problems with the code with xlc:
- The TOC read in mca_patcher_base_patch_hook used the syntax
register unsigned long toc asm("r2") to read $r2 (the TOC
pointer). With gcc this seems to behave as expected but with xlc
the result in toc is not the same as $r2. I updated the code to use
asm volatile ("std 2, %0" : "=m" (toc)) to load the TOC pointer.
- The OPAL_PATCHER_BEGIN macro is meant to be the first thing in a
hook. On PPC64 it loads the correct TOC pointer (thanks to
mca_patcher_base_patch_hook) and saves the old one. The
OPAL_PATCHER_END macro restores the TOC pointer. Because we *need*
the TOC to be correct before it is accessed in the hook the
OPAL_PATCHER_BEGIN macro MUST come first. We did this and all was
well with gcc. With xlc on the other hand there was a TOC access
before the assembly inserted by OPAL_PATCHER_BEGIN. To fix this
quickly I broke each hook into a pair of function with the
OPAL_PATCHER_* macros on the top level functions. This works around
the issue but is not a clean way to fix this. In the future we
should 1) either update overwrite to not need this, or 2) figure
out why xlc is not inserting the asm before the first TOC read.
This fixesopen-mpi/ompi#1854
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
With libfabric v1.4, the usnic provider changed the values of its
fabric and domain name strings (compared to libfabric <v1.4). Update
the Open MPI usNIC BTL to handle both pre-v1.4 and v1.4 fabric/domain
names.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
and fail with a user friendly message if no method is available:
"sec: native cannot validate_cred on this system"
(back-ported from upstream pmix/master@c474a1fc60)
This commit fixes a race that can occur when two threads are in the
ugni progress function at the same time. This race occurs when one
thread calls GNI_PostDataProbeById then goes to sleep then another
thread calls GNI_PostDataProbeById then GNI_EpPostDataWaitById before
the other thread wakes up. If this happens the first thread will print
a warning on GNI_EpPostDataWaitById about no matching post.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
