Also, per chat with Jeff, modified the Makefile.am's of a few orte tools so that they were consistent in the way we generate the ompi-equivalent cmds.
This commit was SVN r20165.
Basically, the remaining problem turned out to be:
1. closing stdout/stderr during orte_finalize of mpirun
2. inadvertently setting up a write event on fd = -1
3. devising a scheme to more accurately track when the stdin write event was active vs closed so it only got released once
This passed prelim MTT testing by Jeff and Tim, but should soak for awhile before migrating to 1.3.
This commit was SVN r20106.
The following SVN revision numbers were found above:
r20064 --> open-mpi/ompi@a07660aea8
r20068 --> open-mpi/ompi@ec930d14a9
r20074 --> open-mpi/ompi@2940309613
It is a small launch performance improvement as now we relay the launch cmd across to the next daemon before taking the time to launch our own local procs. Still, it does allow more parallel operations during the launch procedure.
This commit was SVN r20104.
1. a direct callback from waitpid - this set the waitpid_fired flag
2. a notify event callback from the IOF - this set the iof complete flag
3. a message via the daemon cmd processor from the proc "de-registering" the sync, thus indicating it was going through MPI_Finalize.
The problem is that these could overlap, with the first two allowing the orted to declare the proc complete before the daemon had responded to #3.
This change forces all three events to flow through the daemon cmd processor, thus ensuring an ordered handling. I'm not certain this will solve the problem, but will await further MTT reports to see. Unfortunately, the problem doesn't show up on any manual or script-based tests I have been able to run, even when I duplicate the exact cmd that fails under MTT.
This commit was SVN r20074.
1. coordination of job completion notification to include a requirement for both waitpid detection AND notification that all iof pipes have been closed by the app
2. change of all IOF read and write events to be non-persistent so they can properly be shutdown and restarted only when required
3. addition of a delay (currently set to 10ms) before restarting the stdin read event. This was required to ensure that the stdout, stderr, and stddiag read events had an opportunity to be serviced in scenarios where large files are attached to stdin.
This commit was SVN r20064.
This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message.
This commit was SVN r20022.
1. modify the iof to track when a proc actually closes all of its open iof output pipes. When this occurs, notify the odls that the proc's iof is complete. This is done via a zero-time event so that we can step out of the read event before processing the notification.
2. in the odls, modify the waitpid callback so it only flags that it was called. Add a function to receive the iof-complete notification, and a function that checks for both iof complete and waitpid callback before declaring a proc fully terminated. This ensures that we read and deliver -all- of the IO prior to declaring the job complete.
Also modified the odls call to orte_iof.close (and the component's implementation) so it only closes stdin, leaving the other io channels alone. This fixes the other half of the known problem.
This should fix the ticket on this subject, but I'll wait to close it pending further testing in the trunk.
This commit was SVN r19991.
The problem was that we close the same fd twice, and that meantime the fd could have been reassigned
to some other file or socket.
This commit was SVN r19869.
1. remove direct routed module (hooray!)
2. add radix tree routed module (binomial remains default)
3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess
4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support
5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability
6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)
Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.
This will require an autogen...
This commit was SVN r19866.
Without this patch, doing spawn in a loop ended up by exhausting all
available file descriptors pretty quickly. There were about 5 file
descriptors opened per spawned process. Now the number of file
descriptors managed by the process (orted or HNP)
is a lot smaller.
This commit was SVN r19864.
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
Refers to ticket #1548. Although this appears to fix the problem, the ticket will be held open pending further test prior to transition to the 1.3 branch.
This commit was SVN r19674.
See opal/mca/paffinity/paffinity.h for explanation as to the physical vs logical nature of the params used in the API.
Fixes trac:1435
This commit was SVN r19391.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
Provide support for four MPIR extensions that allow specification of debugger daemon executable, argv for the debugger daemon, whether or not to forward debugger daemon IO, and whether or not debugger daemon will piggy-back on ORTE OOB network. Last is not yet implemented.
No change in behavior or operation occurs unless (a) the debugger specifically utilizes the extensions and, for co-locate while running, the user specifically enables the capability via an MCA param. Two of the MPIR extensions supported here are used in a widely-used debugger for a large-scale installation. The other two extensions are new and being utilized in prototype work by several debuggers for possible future release.
This commit was SVN r19275.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
Cleanup the logic in the odls for when processes terminate. It turns out that we were only going through the kill_proc logic once instead of looping over all local children when we ordered a daemon to kill its local procs. This went unnoticed for some time as for most systems the local procs were terminated anyway when the daemon terminated due to the parent/child relationship.
Solaris is apparently different - the children are not automatically terminated when the parent dies. As a result, it acts as a detector for this bug.
Mucho thanks to Rolf V. for his help in debugging - and to IM for letting me follow his gdb progress in quasi real-time!
This commit was SVN r19044.
Modify the odls to remove a (size_t) typecast in front of the num_processors variable just in case it is returned negative. This usually is accompanied by an opal_error, so this shouldn't make any difference - but it is more technically correct.
This commit was SVN r19008.
Fixed allocation of all ranks when using RANKFILE, but not all ranks assigned
Aborting if using RANKFILE, but np wasn't specified a little earlier
Clean mca_rmaps_rank_file_component.debug
This commit was SVN r19004.
Short version: remove opal_paffinity_alone and restore
mpi_paffinity_alone. ORTE makes various information available for the
MPI layer to decide what it wants to do in terms of processor
affinity.
Details:
* remove opal_paffinity_alone MCA param; restore mpi_paffinity_alone
MCA param
* move opal_paffinity_slot_list param registration to paffinity base
* ompi_mpi_init() calls opal_paffinity_base_slot_list_set(); if that
succeeds use that. If no slot list was set, see if
mpi_paffinity_alone was set. If so, bind this process to its Node
Local Rank (NLR). The NLR is the ORTE-maintained slot ID; if you
COMM_SPAWN to a host in this ORTE universe that already has procs
on it, the NLR for the new job will start at N (not 0). So this is
slightly better than mpi_paffinity_alone in the v1.2 series.
* If a slot list is specified *and* mpi_paffinity_alone is set, we
display an error and abort.
* Remove calls from rmaps/rank_file component to register and lookup
opal_paffinity mca params.
* Remove code in orte/odls that set affinities - instead, have them
just pass a slot_list if it exists.
* Cleanup the orte/odls code that determined
oversubscribed/want_processor as these were just opposites of each
other.
This commit was SVN r18874.
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
1. repair of the linear and direct routed modules
2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI
3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature
4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes.
Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB
5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept.
Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules.
6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch
7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch
8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies
9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc.
10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon
There is still more cleanup to be done for efficiency, but this at least works.
Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn.
Fixes ticket #1256
This commit was SVN r18804.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Make it all work with comm_spawn in the case of all procs on previously occupied nodes, some new procs on new nodes, and mixtures of the two.
Note: comm_spawn now works with both binomial and linear routed modules. There remains a problem of spawned procs not properly getting updated contact info for the parent proc when run in the direct routed mode...but that's for another day.
This commit was SVN r18385.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
Modify grpcomm xcast so it now uses the selected routed module - eliminates cross-wiring of xcast and routing paths. Suboptimal at the moment, but better implementation is on its way.
Cleanup ignore properties on the new routed components.
This commit was SVN r18377.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
Add the daemon map capability to the ODLS to create and save a map of daemon vpid vs nodename from the launch message.
Cleanup a few places in the base plm launch support where we didn't adequately protect rml recv's from potentially executing sends.
This commit was SVN r18143.
1. applied prefix rule to functions and variables of RMAPS rank_file component
2. cleaned ompi_mpi_init.c from paffinity code
3. paffinity code moved to new opal/mca/paffinity/base/paffinity_base_service.c file
4. added opal_paffinity_slot_list mca parameter
This commit was SVN r18019.
The bug was a race condition in the barrier operation that caused the barrier in MPI_Finalize to fail on very short programs.
Scalaiblity was improved by using the daemons to aggregate modex and barrier messages before sending them to the rank=0 proc. Improvement is proportional to ppn, of course, but there really wasn't a scaling problem at low ppn anyway. This modification also paves the way for better allgather operations since now all the data for each node is sitting at the daemon level, and the daemons are now aware that a collective operation on the OOB is underway (so they -can- participate in a collective of their own to support it).
Also added better diagnostics to map out the timing associated with MPI_Init - turned on by -mca orte_timing 1.
This commit was SVN r17988.
Only one place used the user name field - session_dir, when formulating the name of the top-level directory. Accordingly, the code for getting the user's id has been moved to the session_dir code.
This commit was SVN r17926.
Fix race conditions in abnormal terminations. We had done a first-cut at this in a prior commit. However, the window remained partially open due to the fact that the HNP has multiple paths leading to orte_finalize. Most of our frameworks don't care if they are finalized more than once, but one of them does, which meant we segfaulted if orte_finalize got called more than once. Besides, we really shouldn't be doing that anyway.
So we now introduce a set of atomic locks that prevent us from multiply calling abort, attempting to call orte_finalize, etc. My initial tests indicate this is working cleanly, but since it is a race condition issue, more testing will have to be done before we know for sure that this problem has been licked.
Also, some updates relevant to the tool comm library snuck in here. Since those also touched the orted code (as did the prior changes), I didn't want to attempt to separate them out - besides, they are coming in soon anyway. More on them later as that functionality approaches completion.
This commit was SVN r17843.
Note that --path specifies extra directories where the executable
is searched for, but does not affect the PATH settings.
This commit fixes trac:1221.
This commit was SVN r17748.
The following Trac tickets were found above:
Ticket 1221 --> https://svn.open-mpi.org/trac/ompi/ticket/1221
Basically, the method employed here is to have a recv create a zero-time timer event that causes the event library to execute a function that processes the message once the recv returns. Thus, any action taken as a result of processing the message occur outside of a recv.
Created two new macros to assist:
ORTE_MESSAGE_EVENT: creates the zero-time event, passing info in a new orte_message_event_t object
ORTE_PROGRESSED_WAIT: while waiting for specified conditions, just calls progress so messages can be recv'd.
Also fixed the failed_launch function as we no longer block in the orted callback function. Updated the error messages to reflect revision. No change in API to this function, but PLM "owners" may want to check their internal error messages to avoid duplication and excessive output.
This has been tested on Mac, TM, and SLURM.
This commit was SVN r17647.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
variable is not defined. Make sure to set it to something reasonable
so that file preloading still works (instead of seg faulting :)
Thanks to Hiep Bui Hoang for reporting this bug.
This commit was SVN r16433.
1. taking advantage of the fact that we no longer create the launch message via a GPR trigger. In earlier times, we had the GPR create the launch message based on a subscription. In that mode of operation, we could not guarantee the order in which the data was stored in the message - hence, we had no choice but to parse the message in a loop that checked each value against a list of possible "keys" until the corresponding value was found.
Now, however, we construct the message "by hand", so we know precisely what data is in each location in the message. Thus, we no longer need to send the character string "keys" for each data value any more. This represents a rather large savings in the message size - to give you an example, we typically would use a 30-char "key" for a 2-byte data value. As you can see, the overhead can become very large.
2. sending node-specific data only once. Again, because we used to construct the message via subscriptions that were done on a per-proc basis, the data for each node (e.g., the daemon's name, whether or not the node was oversubscribed) would be included in the data for each proc. Thus, the node-specific data was repeated for every proc.
Now that we construct the message "by hand", there is no reason to do this any more. Instead, we can insert the data for a specific node only once, and then provide the per-proc data for that node. We therefore not only save all that extra data in the message, but we also only need to parse the per-node data once.
The savings become significant at scale. Here is a comparison between the revised trunk and the trunk prior to this commit (all data was taken on odin, using openib, 64 nodes, unity message routing, tested with application consisting of mpi_init/mpi_barrier/mpi_finalize, all execution times given in seconds, all launch message sizes in bytes):
Per-node scaling, taken at 1ppn:
#nodes original trunk revised trunk
time size time size
1 0.10 819 0.09 564
2 0.14 1070 0.14 677
3 0.15 1321 0.14 790
4 0.15 1572 0.15 903
8 0.17 2576 0.20 1355
16 0.25 4584 0.21 2259
32 0.28 8600 0.27 4067
64 0.50 16632 0.39 7683
Per-proc scaling, taken at 64 nodes
ppn original trunk revised trunk
time size time size
1 0.50 16669 0.40 7720
2 0.55 32733 0.54 11048
3 0.87 48797 0.81 14376
4 1.0 64861 0.85 17704
Condensing those numbers, it appears we gained:
per-node message size: 251 bytes/node -> 113 bytes/node
per-proc message size: 251 bytes/proc -> 52 bytes/proc
per-job message size: 568 bytes/job -> 399 bytes/job
(job-specific data such as jobid, override oversubscribe flag, total #procs in job, total slots allocated)
The fact that the two pre-commit trunk numbers are the same confirms the fact that each proc was containing the node data as well. It isn't quite the 10x message reduction I had hoped to get, but it is significant and gives much better scaling.
Note that the timing info was, as usual, pretty chaotic - the numbers cited here were typical across several runs taken after the initial one to avoid NFS file positioning influences.
Also note that this commit removes the orte_process_info.vpid_start field and the handful of places that passed that useless value. By definition, all jobs start at vpid=0, so all we were doing is passing "0" around. In fact, many places simply hardwired it to "0" anyway rather than deal with it.
This commit was SVN r16428.
This patch also fixes a minor bug discovered along the way: we had "lost" the passing of the oversubscribed condition flag from the mapper to the orteds. Thus, we were not setting sched_yield correctly when in oversubscribed conditions (except when a hostfile was specified - different logic there because we treat the number of slots allocated on the node as "uncertain")
I did not modify the process component in this patch - I will send a proposed patch to the maintainers of that component so they can review it first.
This commit was SVN r16418.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
(Someday I'll learn to do this before committing)
This commit was SVN r16260.
The following SVN revision numbers were found above:
r16252 --> open-mpi/ompi@e10f476c87
and implementation. This has shown drastic performance benefit when
transferring Many files at roughly the same time.
I tested this for many different filem operations and everything was working
fine. Let me know if you have any problems with this functionality.
Some Notes:
- opal-checkpoint now has a 'quiet' flag to keep it from being too verbose.
- FileM RSH component is fully non-blocking.
- FileM RSH component has incomming connection throttling since by default
ssh only allows 10 concurrent scp connections to any single host. This
default can be adjusted via an MCA parameter.
{{{-mca filem_rsh_max_incomming 10}}}
- There is an MCA parameter for max outgoing connections, but it is currently
not implemented. If someone needs it then it should not be hard to implement.
{{{-mca filem_rsh_max_outgoing 10}}}
- Changed the FileM request structure so that it is a bit more explicit and
flexible.
- Moved the 'preload-binary' and 'preload-files' functionality into odls/base
allowing for code reuse in the 'process' and 'default' ODLS components.
- Fixed a bug in the process name resolution which broke the 'preload-*'
functionality due to GPR table structure changes.
- The FileM RSH component might be able to see even more speedup from using a
thread pool to operate on the work_pool structures, but that is for future
work.
- Added a 'opal-show-help' file to ODLS Base
This commit was SVN r16252.
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
Cleanup ALL instances of output involving the printing of orte_process_name_t structures using the ORTE_NAME_ARGS macro so that the number of fields and type of data match. Replace those values with a new macro/function pair ORTE_NAME_PRINT that outputs a string (using the new thread safe data capability) so that any future changes to the printing of those structures can be accomplished with a change to a single point.
Note that I could not possibly find outputs that directly print the orte_process_name_t fields, but only dealt with those that used ORTE_NAME_ARGS. Hence, you may still have a few outputs that bark during compilation. Also, I could only verify those that fall within environments I can compile on, so other environments may yield some minor warnings.
This commit was SVN r15517.
You will not see any impact from this change unless you use the syntax described in ticket #1023. I've tried as many of the RAS components as possible and saw no problem - there may be issues with other RAS components that would not compile on any of my systems. Anything that appears should be trivial to fix.
This commit was SVN r15427.
The problem stemmed from no longer launching a local orted on the same node as mpirun. The orted would save and reuse the base environment. Mpirun didn't do that, and the odls was using the orted's globally saved environment (which wasn't being set).
This fix establishes a globally accessible base launch environment that both the orted and mpirun can utilize. Since we now use that, we don't need to pass it to the odls_launch_proc function, so remove that param from the API (and modify all components to handle the change).
This commit was SVN r15405.
Short description: major changes include -
1. singletons now fork/exec a local daemon to manage their operations.
2. the orte daemon code now resides in libopen-rte
3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided.
I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine.
This commit was SVN r15390.
The default odls has been updated and works fine. The process odls has been updated, but I could not verify its operation. The bproc ODLS has not been updated yet. Ralph will look at it soon.
This commit was SVN r15257.
The SnapC Full local Coordinator used this argument to attach to the job the
daemon would be launching. So once this option was removed C/R support broke.
This commit has the local coordinator attach to the job just before it is
launched by the ODLS module. This is a much cleaner solution, and will
eventually allow the SnapC modules to attach to multiple jobs launched
on a single machine.
This commit fixes the C/R regression introduced in r15007.
This commit was SVN r15121.
The following SVN revision numbers were found above:
r15007 --> open-mpi/ompi@85df3bd92f
1. generalize orte_rml.xcast to become a general broadcast-like messaging system. Messages can now be sent to any tag on the daemons or processes. Note that any message sent via xcast will be delivered to ALL processes in the specified job - you don't get to pick and choose. At a later date, we will introduce an augmented capability that will use the daemons as relays, but will allow you to send to a specified array of process names.
2. extended orte_rml.xcast so it supports more scalable message routing methodologies. At the moment, we support three: (a) direct, which sends the message directly to all recipients; (b) linear, which sends the message to the local daemon on each node, which then relays it to its own local procs; and (b) binomial, which sends the message via a binomial algo across all the daemons, each of which then relays to its own local procs. The crossover points between the algos are adjustable via MCA param, or you can simply demand that a specific algo be used.
3. orteds no longer exhibit two types of behavior: bootproxy or VM. Orteds now always behave like they are part of a virtual machine - they simply launch a job if mpirun tells them to do so. This is another step towards creating an "orteboot" functionality, but also provided a clean system for supporting message relaying.
Note one major impact of this commit: multiple daemons on a node cannot be supported any longer! Only a single daemon/node is now allowed.
This commit is known to break support for the following environments: POE, Xgrid, Xcpu, Windows. It has been tested on rsh, SLURM, and Bproc. Modifications for TM support have been made but could not be verified due to machine problems at LANL. Modifications for SGE have been made but could not be verified. The developers for the non-verified environments will be separately notified along with suggestions on how to fix the problems.
This commit was SVN r15007.
A bunch of fixes from the /tmp/iof-fixes branch that fix up ''some''
(but not ''all'') of the problems that we have seen with iof:
* Reading very large files via stdin redirected to orteun (Sun saw
this)
* Reading a little bit of a large file redirected to orterun's stdin
and then either closing stdin or exiting the process
The Big Change was to make the proxy iof (the one running in non-HNP
orteds) send back a "I'm closing the stream" ACK back to the service
iof. This tells the HNP that there will be nothing more coming from
that peer, and therefore the iof forward should be removed.
Many other minor cleanups/fixes, terminology changes, and
documentation additions are included in this commit as well. However,
there are still some pretty big outstanding issues with IOF that are
not addressed either by #967 or this commit. A few examples:
* IOF was designed to allow multiple subscribers to a single stream.
We're not entirely sure that this works (for one thing, there is
nothing in the ORTE/OMPI code base that uses this functionality).
* There are also resources leaked when processes/jobs exit (per
Ralph's first comment on this ticket).
* There is no feedback to close orterun's stdin when all subscribers
to the corresponding stream have closed stdin.
This commit was SVN r14967.
The following Trac tickets were found above:
Ticket 967 --> https://svn.open-mpi.org/trac/ompi/ticket/967
The primary change that underlies all this is in the OOB. Specifically, the problem in the code until now has been that the OOB attempts to resolve an address when we call the "send" to an unknown recipient. The OOB would then wait forever if that recipient never actually started (and hence, never reported back its OOB contact info). In the case of an orted that failed to start, we would correctly detect that the orted hadn't started, but then we would attempt to order all orteds (including the one that failed to start) to die. This would cause the OOB to "hang" the system.
Unfortunately, revising how the OOB resolves addresses introduced a number of additional problems. Specifically, and most troublesome, was the fact that comm_spawn involved the immediate transmission of the rendezvous point from parent-to-child after the child was spawned. The current code used the OOB address resolution as a "barrier" - basically, the parent would attempt to send the info to the child, and then "hold" there until the child's contact info had arrived (meaning the child had started) and the send could be completed.
Note that this also caused comm_spawn to "hang" the entire system if the child never started... The app-failed-to-start helped improve that behavior - this code provides additional relief.
With this change, the OOB will return an ADDRESSEE_UNKNOWN error if you attempt to send to a recipient whose contact info isn't already in the OOB's hash tables. To resolve comm_spawn issues, we also now force the cross-sharing of connection info between parent and child jobs during spawn.
Finally, to aid in setting triggers to the right values, we introduce the "arith" API for the GPR. This function allows you to atomically change the value in a registry location (either divide, multiply, add, or subtract) by the provided operand. It is equivalent to first fetching the value using a "get", then modifying it, and then putting the result back into the registry via a "put".
This commit was SVN r14711.
To be precise, given this hypothetical launching pattern:
host1: vpids 0, 2, 4, 6
host2: vpids 1, 3, 5, 7
The local_rank for these procs would be:
host1: vpids 0->local_rank 0, v2->lr1, v4->lr2, v6->lr3
host2: vpids 1->local_rank 0, v3->lr1, v5->lr2, v7->lr3
and the number of local procs on each node would be four. If vpid=0 then does a comm_spawn of one process on host1, the values of the parent job would remain unchanged. The local_rank of the child process would be 0 and its num_local_procs would be 1 since it is in a separate jobid.
I have verified this functionality for the rsh case - need to verify that slurm and other cases also get the right values. Some consolidation of common code is probably going to occur in the SDS components to make this simpler and more maintainable in the future.
This commit was SVN r14706.
Test for system limits (where known) prior to doing things like fork and pipe since some systems aren't very nice about it when we try to exceed such limits.
This commit was SVN r14494.
There is a binomial algorithm in the code (i.e., the HNP would send to a subset of the orteds, which then relay it on according to the typical log-2 algo), but that has a bug in it so the code won't let you select it even if you tried (and the mca param doesn't show, so you'd *really* have to try).
This also involved a slight change to the oob.xcast API, so propagated that as required.
Note: this has *only* been tested on rsh, SLURM, and Bproc environments (now that it has been transferred to the OMPI trunk, I'll need to re-test it [only done rsh so far]). It should work fine on any environment that uses the ORTE daemons - anywhere else, you are on your own... :-)
Also, correct a mistake where the orte_debug_flag was declared an int, but the mca param was set as a bool. Move the storage for that flag to the orte/runtime/params.c and orte/runtime/params.h files appropriately.
This commit was SVN r14475.
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
This change utilizes the new num_processors function. I also left the mods made to ompi_mpi_init and the bug fix for the default value of mpi_yield_when_idle. Note that the mods to mpi_init will not really take effect as the mca param will now *always* be set (either by user or odls). We will need those mods later, so no point in removing them now.
This commit was SVN r13519.
1. if the user has specified sched_yield, we simply do what we are told
2. if they didn't specify anything, try to get the number of processors on this node. Note that we already now get the number of local procs in our job that are sharing this node - that now comes in through the proc callback and is stored in the ompi_proc_t structures.
3. if we can get the number of processors, compare that to the number of local procs from my job that are sharing my node. If the number of local procs exceeds the number of processors, then set sched_yield to true. If not, then be a hog and set sched_yield to false
4. if we can't get the number of processors, default to conservative behavior and set sched_yield to true.
Note that I have not yet dealt with the need to dynamically adjust this setting as more processes are added via comm_spawn. So far, we are *only* looking within our own job. Given that we have now moved this logic to mpi_init (and away from the orteds), it isn't yet clear to me how a process will be informed about the number of procs in *other* jobs that are also sharing this node.
Something to continue to ponder.
This commit was SVN r13430.
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
rc (which is -1 or 4 if we hit this case) resulted in an odd error that a
signal killed the proc (instead of a startup error, as is reality).
Instead, use the W_EXITCODE macro (if available) to build up an exit
code that has an error code for exit status, but does not make it look
like the process died from a signal
This commit was SVN r12890.
I found only two places that were looking at the tokens:
1. the odls - we used the tokens to separately process the globals container data from everything else. In this case, I left the subscription that returned the globals data alone, but "stripped" the subscription that returned the launch data for the procs. These subscriptions have nothing to do with the xcast message.
2. the pml_base_modex - the callback function was getting process names from the returned tokens. Actually, this function was doing a very bad thing - it was assuming that the first token returned was *always* the process name. This is currently true, but is one of those assumptions that someone could have easily changed - and suddenly found the system inexplicably failing. I modified the function to (a) get the name sent back to us, (b) "stripped" the value structures of tokens and segment strings, and (c) correctly obtained process names from the returned values. I also reindented the heck out of the code so it was legible (at least, to my old eyes).
This commit was SVN r12813.
Obviously, people like bproc will have to get the app_num via another avenue...but that's a problem for another day. Several options are easily available.
This commit was SVN r12788.
1. implement and enable the non-described buffer operations. I will send out a more detailed explanation separately. However, this mode of operation (which is now the default) significantly reduces message size during startup. If you want the described buffers, set the mca param "-mca dss_describe_buffer 1".
2. revise the xcast system to support both linear and binomial tree broadcast methods. Since we are seeing scenarios where the binomiall tree can cause problems, I have made the linear method the default. To run with the binomial tree, set the mca param "-mca oob_xcast_mode binomial".
3. add some detailed timing reports to the xcast operation. These are enabled via "-mca oob_xcast_timing 1".
4. add some more unit tests for the dss and gpr (focused on support for the non-described buffer)
This commit was SVN r12722.
Modify the RMAPS framework so we eliminate communicating a map to a backend node when certain attributes are set. The proxy functions are now implemented in the base, and a check made for HNP/non-HNP operation made in the map_jobs function prior to execution.
This commit was SVN r12619.
Add placeholders for the new orte tools. These don't actually do anything yet - in fact, I have set the .ompi_ignore so that you won't compile them (I have set a .ompi_unignore for me). Please let me know if you encounter any trouble with this - the ompi_ignore's should protect everyone.
This commit was SVN r12616.
1. new functionality in the pls base to check for reusable daemons and launch upon them
2. an extension of the odls API to allow each odls component to build a notify message with the "correct" data in it for adding processes to the local daemon. This means that the odls now opens components on the HNP as well as on daemons - but that's the price of allowing so much flexibility. Only the default odls has this functionality enabled - the others just return NOT_IMPLEMENTED
3. addition of a new command line option "--reuse-daemons" to orterun. The default, for now, is to NOT reuse daemons. Once we have more time to test this capability, we may choose to reverse the default. For one thing, we probably want to investigate the tradeoffs in start time for comm_spawn'd processes that reuse daemons versus launch their own. On some systems, though, having another daemon show up can cause problems - so they may want to set the default as "reuse".
This is ONLY enabled for rsh launch, at the moment. The code needing to be added to each launcher is about three lines long, so I'll be doing that as I get access to machines I can test it on.
This commit was SVN r12608.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
Add some debugger output to the ODLS default component.
Modify the orted command communication system so that it is done via non-blocking sends. This removes the linearity of the transmission and improves the response time.
This commit was SVN r12585.
Add some debugging output to the ODLS default module, and the orted.
Remove the nodename data from the ODLS info report - that info is already stored in the registry by the RMAPS framework upon completing the mapping procedure.
Add another test program that does an ORTE-only dynamic spawn (gasp!). Looks just like comm_spawn - just no MPI involved.
Modify the ODLS to release the processor when we "kill" local procs in a more scalable fashion. It previously had a sleep in it that Jeff's prior commit removed. However, he introduced some Windows code into the non-Windows component (protected by "if"s, but unnecessary). This is a more general solution he proposed - included here so I could get things to compile properly.
This commit was SVN r12579.
1. Fix the "hang" condition when an application isn't found. It turned out that the ODLS had some difficulty with the process actually not having been started - hence, it never called the waitpid callback. As a result, the "terminated" trigger didn't fire, and so mpirun didn't wake up. With this change, the HNP's errmgr forces the issue by causing the trigger to fire itself when an abort condition occurs.
2. Shift the recording of the pid and the nodename from mpi_init to the orted launcher. This allows programs such as Eclipse PTP to get the pids even for non-MPI applications. In the case of bproc, the pls handles this chore since we don't use orteds in that system.
This commit was SVN r12558.
This patch will cause a problem for cnos, however, as there we want to specifically tell the backends to be "null". I'm working on that issue.
This commit was SVN r12225.
processes launched locally for the stdio file names. This was causing
the expected files to not exist and bproc_vexecmove_io to fail.
* Clean up a bunch of debugging output in the bproc pls
This commit was SVN r12102.
I have tested on rsh, slurm, bproc, and tm. Bproc continues to have a problem (will be asking for help there).
Gridengine compiles but I cannot test (believe it likely will run).
Poe and xgrid compile to the extent they can without the proper include files.
This commit was SVN r12059.
Fix for double mutex free that would cause an abort condition in the orted
whenever threads were enabled.
This commit was SVN r11759.
The following Trac tickets were found above:
Ticket 391 --> https://svn.open-mpi.org/trac/ompi/ticket/391
