Instead of ompi_datatype_get_extent(), use ompi_datatype_get_true_extent()
to get the local and remote lower bound. For derived types like
subarray, true_lb is the correct offset for RDMA operations.
This commit fixes a typo in compare-and-swap when retrieving the
memory region associated with a displacement. It was erroneously 8
bytes instead of the datatype size. This can cause an incorrect RMA
range error when the compare-and-swap is less than 4 bytes from the
end of the region.
Fixedopen-mpi/ompi#2080
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for using network AMOs for MPI_Accumulate,
MPI_Fetch_and_op, and MPI_Compare_and_swap. This support is only
enabled if the ompi_single_intrinsic info key is specified or the
acc_single_interinsic MCA variable is set. This configuration
indicates to this implementation that no long accumulates will be
performed since these do not currently mix with the AMO
implementation.
This commit also cleans up the code somwhat. This includes removing
unnecessary struct keywords where the type is also typedef'd.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes an ordering bug in the code that keeps track of all
attached memory windows. The code is intended to keep the memory
regions sorted but was often inserting at the wrong index. Thanks to
Christoph Niethammer for reporting the issue. The reproducer will be
added to nightly MTT testing.
Fixesopen-mpi/ompi#2012
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug in the RDMA compare-and-swap implementation
that caused the origin value to always be written even if the compare
should have failed.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Need to increment the total size after checking the local offset not
before. This typo causes large allocations with MPI_Win_allocate() to
fail.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Remodel the request.
Added the wait sync primitive and integrate it into the PML and MTL
infrastructure. The multi-threaded requests are now significantly
less heavy and less noisy (only the threads associated with completed
requests are signaled).
* Fix the condition to release the request.
This commit fixes a bad synchronization detection bug that occurs when
mixing MPI_Win_fence() and MPI_Win_lock(). If no communication has
occurred in the fence epoch it is safe to just clear the all_sync
object (it was set up by fence).
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug that occurs when ranks are either not mapped
evenly or by something other than core.
Fixesopen-mpi/ompi#1599
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1324726 (#1 of 1): Free of address-of expression (BAD_FREE):
Indeed, if a lock conflicts with the lock_all we will end up trying to
free an invalid pointer.
Fix CID 1328826 (#1 of 1): Dereference after null check (FORWARD_NULL):
This was intentional but it would be a good idea to check for
module->comm being non_NULL to be safe. Also cleaned out some checks
for NULL before free().
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds code to handle large unaligned gets. There are two
possible code paths for these transactions:
1) The remote region and local region have the same alignment. In
this case the get will be broken down into at most three get
transactions: 1 transaction to get the unaligned start of the region
(buffered), 1 transaction to get the aligned portion of the region,
and 1 transaction to get the end of the region.
2) The remote and local regions do not have the same alignment. This
should be an uncommon case and is not optimized. In this case a
buffer is allocated and registered locally to hold the aligned data
from the remote region. There may be cases where this fails (low
memory, can't register memory). Those conditions are unlikely and
will be handled later.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
If atomics are not globally visible (cpu and nic atomics do not mix)
then a btl endpoint must be used to access local ranks. To avoid
issues that are caused by having the same region registered with
multiple handles osc/rdma was updated to always use the handle for
rank 0. There was a bug in the update that caused osc/rdma to continue
using the local endpoint for accessing the state even though the
pointer/handle are not valid for that endpoint. This commit fixes the
bug.
Fixesopen-mpi/ompi#1241.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Optimizing put aggregation in the presence of threads will require a
redesign of the code. For now just ensure that put aggregation is
turned off when MPI_THREAD_MULTIPLE is enabled.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
NOTE: Building with external pmix *requires* that you also build with external libevent and hwloc libraries. Detect this at configure and error out with large message if this requirement is violated.
Closes#1204 (replaces it)
Fixes#1064
A previous commit updated the one-sided code to register the state
region only once. This created an issue when using the scratch lock
with fetching atomics. In this case on any rank that isn't local rank
0 the module->state_handle is NULL. This commit fixes the issue by
removing the scratch lock and using a fragment pointer instead.
Fixesopen-mpi/ompi#1290
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit changes the way ompi_proc_t's are retained/released by
ompi_group_t's. Before this change ompi_proc_t's were retained once
for the group and then once for each retain of a group. This method
adds unnecessary overhead (need to traverse the group list each time
the group is retained) and causes problems when using an async
add_procs.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
There were two bugs in osc/rdma when using threads:
- Deadlock is ompi_osc_rdma_start_atomic. This occurs because
ompi_osc_rdma_frag_alloc is called with the module lock. To fix the
issue the module lock is now recursive. In the future I will add a
new lock to protect just the current rdma fragment.
- Do not drop the lock in ompi_osc_rdma_frag_alloc when calling
ompi_osc_rdma_frag_complete. Not only is it not needed but dropping
the lock at this point can cause a competing thread to mess up the
state.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug that can occur on Cray Gemini networks. If
multiple registrations are used for the local state then we looks the
atomicity guarantees. To avoid issues like this use only a single
registration handle for all local state on a node.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes the following:
- CIDs 1328491, 1328492: Dead code caused by typos in a prior
commit.
- Fix the calculation of dynamic memory regions. This was causes
incorrect RMA range errors when accessing the last partial page of
an attachment.
- Fix a SEGV when using dynamic memory windows with local state (all
processes on the same node).
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes several bugs in the osc/rdma component:
- Complete aggregated requests immediately. Completion of RMA
requests indicates local completion anyway. This fixes a hang in
the c_reqops test.
- Correctly mark Rget_accumulate requests.
- Set the local base flag correctly on the local peer.
- Clear or set the no locks flag on the window if the value is
changed by MPI_Win_set_info.
- Actually update the target when using MPI_OP_REPLACE.
Fixesopen-mpi/ompi#1010
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes an issue identified by @rolfv. The local peer was
not being correctly initialized when running with a single process on
a node.
This fixesopen-mpi/ompi#1010
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1324733: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324734: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324735: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324736: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324737: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324751: Memory - illegal accesses (USE_AFTER_FREE)
Fix CID 1324750: (USE_AFTER_FREE)
Fix CID 1324749: Memory - corruptions (USE_AFTER_FREE)
Fix CID 1324748: Memory - illegal accesses (USE_AFTER_FREE)
Fix CID 1324747: (USE_AFTER_FREE)
Fix CID 1324746: Memory - corruptions (USE_AFTER_FREE)
Add missing return on an error path.
Fix CID 1324745: Code maintainability issues (UNUSED_VALUE)
Ignore return code from barrier. It was not being used anyway.
Fix CID 1324738: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324741: Null pointer dereferences (REVERSE_INULL)
module->selected_btl can not be NULL in osc/rdma during normal
operation. Removed the unnecessary NULL check.
Fix CID 1324752: Memory - illegal accesses (USE_AFTER_FREE)
Move ompi_osc_pt2pt_module_lock_remove to before the lock is freed.
Fix CID 1324744: Uninitialized variables (UNINIT)
Fix CID 1324743: Uninitialized variables (UNINIT)
This array is not used unitialized but there is no reason not to use
calloc here to silence the warning.
The following CID is a false positive: 1324742. I will mark it such in
coverity.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for performing one-sided operations over
supported hardware (currently Infiniband and Cray Gemini/Aries). This
component is still undergoing active development.
Current features:
- Use network atomic operations (fadd, cswap) for implementing
locking and PSCW synchronization.
- Aggregate small contiguous puts.
- Reduced memory footprint by storing window data (pointer, keys,
etc) at the lowest rank on each node. The data is fetched as each
process needs to communicate with a new peer. This is a trade-off
between the performance of the first operation on a peer and the
memory utilization of a window.
TODO:
- Add support for the accumulate_ops info key. If it is known that
the same op or same op/no op is used it may be possible to use
hardware atomics for fetch-and-op and compare-and-swap.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
The ompi_osc_signal_outgoing was moved from ompi_osc_rdma_frag_start to frag_send
which gave correct results for the bug reproducer but hangs with simple OSC
tests. Moved the ompi_osc_signal_outgoing back and it now passes all tests.
Closes#256
Some of the counters used by the "rdma" one-sided component are intended
to overflow. Since overflow behavior is undefined for signed integers in
C it is safer to use unsigned integers here.
osc/rdma uses counters to determine if all messages have been received
before exiting synchronization calls. The problem is that the active
target counter is always increasing (never zeroed). If over 2^31-1
messages are sent this causes the counter to overflow (in itself this
isn't an error). This causes test/wait to return before the communication
is complete. There is an additional error in the use of the fragment
flush function. If PSCW synchronization is in use this function CAN NOT
be called unless a post message has arrived.
Relevant mailing list thread: http://www.open-mpi.org/community/lists/devel/2014/10/16016.php
This commit fixes both issues. Tested against MTT and issue reproducer.
Closes#224.
