will be the final solution. But I'm committing it now so that
Oracle's Solaris Studio builds can resume.
The issue is that the C++ bindings are now (eventually) including
<hwloc.h>. We use !__hwloc_inline__ and #define it to an appropriate
value at compile-time. The issue is that when we're compiling C++
code, we should just set !__hwloc_inline__ to "inline", because that's
a keyword in the C++ language (as opposed to !__inline__, or
somesuch).
This commit was SVN r26418.
helper file, even if we find that the system has <infiniband/verbs.h>.
The reason is because there are some inline functions in that verbs
helper file that invoke ibv_* functions. Some linkers (e.g., Solaris
Studio Compilers) will instantiate those static inline functions --
even if we don't use them -- and therefore we need to be able to
resolve the ibv_* symbols at link time.
But since -libverbs is only specified in places where we use other
ibv_* functions (e.g., the OpenFabrics-based BTLs), that means that
linking random executables can/will fail (e.g., orterun).
So instead, introduce a new #define: OPAL_HWLOC_WANT_VERBS_HELPER. If
this macro is set to 1 before including opal/mca/hwloc/hwloc.h, then
you'll also get the hwloc OpenFabrics verbs helper header file (*if*
hwloc found <infiniband/verbs.h> -- otherwise, it'll #error).
This commit was SVN r26417.
* Remove paffinity, maffinity, and carto frameworks -- they've been
wholly replaced by hwloc.
* Move ompi_mpi_init() affinity-setting/checking code down to ORTE.
* Update sm, smcuda, wv, and openib components to no longer use carto.
Instead, use hwloc data. There are still optimizations possible in
the sm/smcuda BTLs (i.e., making multiple mpools). Also, the old
carto-based code found out how many NUMA nodes were ''available''
-- not how many were used ''in this job''. The new hwloc-using
code computes the same value -- it was not updated to calculate how
many NUMA nodes are used ''by this job.''
* Note that I cannot compile the smcuda and wv BTLs -- I ''think''
they're right, but they need to be verified by their owners.
* The openib component now does a bunch of stuff to figure out where
"near" OpenFabrics devices are. '''THIS IS A CHANGE IN DEFAULT
BEHAVIOR!!''' and still needs to be verified by OpenFabrics vendors
(I do not have a NUMA machine with an OpenFabrics device that is a
non-uniform distance from multiple different NUMA nodes).
* Completely rewrite the OMPI_Affinity_str() routine from the
"affinity" mpiext extension. This extension now understands
hyperthreads; the output format of it has changed a bit to reflect
this new information.
* Bunches of minor changes around the code base to update names/types
from maffinity/paffinity-based names to hwloc-based names.
* Add some helper functions into the hwloc base, mainly having to do
with the fact that we have the hwloc data reporting ''all''
topology information, but sometimes you really only want the
(online | available) data.
This commit was SVN r26391.
(http://www.open-mpi.org/community/lists/devel/2012/04/10905.php), set
opal_cache_line_size via hwloc data, if we have it.
opal_cache_line_size will be set to an hwloc-inspired value by the end
of orte_init(), but will always have a safe value to use (i.e., a
default value 128) -- even before opal_init() has completed.
Default to the same value of 128 that Open MPI has used for several
years if a) we have no hwloc data, or b) we weren't able to find L2
objects in the hwloc data.
This commit was SVN r26322.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
Worked with Oracle to verify that hwloc PCI detection is correctly
disabled on the Suse 10/64 bit platform and is enabled by default on
all other platforms. The --[en|dis]able-hwloc-pci switch is also
available for manual override of the configure decision about hwloc
PCI support.
This commit was SVN r26175.
This commit was SVN r26165.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4402
hwloc component weren't reverse applied to the external hwloc
component. Additionaly, if we add stuff to LDFLAGS/LIBS, we also may
need to append (DY)LD_LIBRARY_PATH (here in this configure process
only), otherwise future configure tests may fail because they can't
find libhwloc.so (e.g., if you --with-hwloc=/some/path, we need to add
/some/path/lib to (DY)LD_LIBRARY_PATH).
This commit was SVN r26082.
The following Trac tickets were found above:
Ticket 3043 --> https://svn.open-mpi.org/trac/ompi/ticket/3043
This commit was SVN r26037.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4340
This commit was SVN r25987.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4319
This commit was SVN r25986.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4314
1. no binding support - indicated by a negative return code from get_cpubind
2. binding supported, but not bound - the bitset returned by get_cpubind is the same as the available cpuset
3. binding supported and bound - bitset from get_cpubind is a subset of available cpuset
4. only one cpu is available - in this case, get_cpubind matches the available cpuset, but we are effectively bound
This commit was SVN r25957.
in the tarball. Thanks to Paul Hargrove for the fix.
This commit was SVN r25952.
The following Trac tickets were found above:
Ticket 2951 --> https://svn.open-mpi.org/trac/ompi/ticket/2951
problem on SuSE 10 (which might be related to Oracle's dual-bitness
builds, but we aren't completely sure yet).
So just turn it off for now, and bring this over to v1.5. Find a
proper fix (that enables pci support properly) for trunk/v1.7 later.
This commit was SVN r25769.
The following Trac tickets were found above:
Ticket 2952 --> https://svn.open-mpi.org/trac/ompi/ticket/2952
This commit was SVN r25759.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4094
This commit was SVN r25707.
The following SVN revision numbers were found above:
r4102 --> open-mpi/ompi@8961ca568d
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r4104
.ompi_ignored to allow other developers to test with it. It is
expected that we'll remove the .ompi_ignore here soon, and
simultaneously remove the hwloc 1.2.2ompi component.
There was one very minor patch added to stock hwloc 1.3.1 in
hwloc/config/hwloc.m4:
{{{
--- hwloc-1.3.1/config/hwloc.m4 2011-12-14
+++ ompi3/opal/mca/hwloc/hwloc131/hwloc/config/hwloc.m4
@@ -583,6 +583,7 @@
])
fi
AC_SUBST(HWLOC_PCI_LIBS)
+ HWLOC_LIBS="$HWLOC_LIBS $HWLOC_PCI_LIBS"
# If we asked for pci support but couldn't deliver, fail
AS_IF([test "$enable_pci" = "yes" -a "$hwloc_pci_happy" = "no"],
[AC_MSG_WARN([Specified --enable-pci switch, but could
not])
}}}
This will be pushed upstream to hwloc.
This commit was SVN r25706.
supposed to. I.e., half-baked/not complete stuff.
This commit backs out all of r25545. Sorry folks!
This commit was SVN r25546.
The following SVN revision numbers were found above:
r25545 --> open-mpi/ompi@7f9ae11faf
to make MPI_IN_PLACE (and other sentinel Fortran constants) work on OS
X, we need to use the following compiler (linker) flag:
-Wl,-commons,use_dylibs
So if we're compiling on OS X, test to see if that flag works with the
compiler. If so, add it to the wrapper FFLAGS and FCFLAGS (note that
per a future update, we'll only have one Fortran compiler anyway).
Fixes trac:1982.
This commit was SVN r25545.
The following Trac tickets were found above:
Ticket 1982 --> https://svn.open-mpi.org/trac/ompi/ticket/1982
https://svn.open-mpi.org/trac/ompi/wiki/ProcessPlacement
The wiki page is incomplete at the moment, but I hope to complete it over the next few days. I will provide updates on the devel list. As the wiki page states, the default and most commonly used options remain unchanged (except as noted below). New, esoteric and complex options have been added, but unless you are a true masochist, you are unlikely to use many of them beyond perhaps an initial curiosity-motivated experimentation.
In a nutshell, this commit revamps the map/rank/bind procedure to take into account topology info on the compute nodes. I have, for the most part, preserved the default behaviors, with three notable exceptions:
1. I have at long last bowed my head in submission to the system admin's of managed clusters. For years, they have complained about our default of allowing users to oversubscribe nodes - i.e., to run more processes on a node than allocated slots. Accordingly, I have modified the default behavior: if you are running off of hostfile/dash-host allocated nodes, then the default is to allow oversubscription. If you are running off of RM-allocated nodes, then the default is to NOT allow oversubscription. Flags to override these behaviors are provided, so this only affects the default behavior.
2. both cpus/rank and stride have been removed. The latter was demanded by those who didn't understand the purpose behind it - and I agreed as the users who requested it are no longer using it. The former was removed temporarily pending implementation.
3. vm launch is now the sole method for starting OMPI. It was just too darned hard to maintain multiple launch procedures - maybe someday, provided someone can demonstrate a reason to do so.
As Jeff stated, it is impossible to fully test a change of this size. I have tested it on Linux and Mac, covering all the default and simple options, singletons, and comm_spawn. That said, I'm sure others will find problems, so I'll be watching MTT results until this stabilizes.
This commit was SVN r25476.
