is properly initialized and available in all cases (like ompi_info, where
the ess is never actually initialized). Fixes trac:1364.
This commit was SVN r18733.
The following Trac tickets were found above:
Ticket 1364 --> https://svn.open-mpi.org/trac/ompi/ticket/1364
Add ability for sys admins to prohibit putting session directories under specified locations. Thus, they can now protect parallel file systems from foolish user mistakes.
This commit was SVN r18721.
This commit ensures that attempts to access information that is unknowable or undefined returns appropriate invalid or not_supported values to avoid unexpected behavior and/or segfaults.
This commit was SVN r18692.
individual orte/tools/*/Makefile.am files. This causes "make" to
travese into every directory, even if it's not going to build anything
in that directory (which is a good thing). It also helps cleanup and
dist issues.
This also affects orte-checkpoint and orte-restart, but I couldn't get
--with-ft to compile properly; I'll pass along a heads-up to Josh to
ensure that I didn't break anything.
This commit was SVN r18680.
Ensure that routes to remote procs are set on the HNP before completing launch so that the debugger message can be sent. Solves a race condition that can exist in those environments where the HNP does not have local procs.
This commit was SVN r18674.
Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done.
Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations.
For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require.
This fixes ticket #1340
This commit was SVN r18673.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
is still to use the C based wrapper compilers (which have many more features
and are more well tested). The Perl compilers are enabled with the option
--enable-script-wrapper-compilers, which also ignores the option
--disable-binaries (ie --enable-script-wrapper-compilers --disable-binaries
will result in perl-based wrapper compilers being installed, but no other
binaries being installed).
This commit was SVN r18655.
This allows r18645 to fix the memory corruption issue, but also allows us to resolve the memory leaks cited by CID 1039
This commit was SVN r18646.
The following SVN revision numbers were found above:
r18645 --> open-mpi/ompi@53d83ba1c5
This commit repairs the debugger initialization procedure. I am not closing the ticket, however, pending Jeff's review of how it interfaces to the ompi_debugger code he implemented. There were duplicate symbols being created in that code, but not used anywhere. I replaced them with the ORTE-created symbols instead. However, since they aren't used anywhere, I have no way of checking to ensure I didn't break something.
So the ticket can be checked by Jeff when he returns from vacation... :-)
This commit was SVN r18625.
The following Trac tickets were found above:
Ticket 1255 --> https://svn.open-mpi.org/trac/ompi/ticket/1255
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
Add a new function to opal_progress that tells us our recursion depth to support that solution.
Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death...
Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang.
After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them.
Thanks you Jeff! :-/
This commit was SVN r18611.
orte-checkpoint/orte-restart seem to not seem to totally like orte_output so revert them to opal_output for now. Since we have no need for the additional complexity of orte_output we can drop it for now and revisit this if anyone needs it later.
It seems that if you set the verbose level on an output handle then try to call a normal orte_output() on it then the message will *not* be printed. This is the same for opal_output, and seems incorrect to me because it stops some error messages from being printed out if you do not directly specify opal_output(0, ...). Maybe someone should take a look a this.
orte-checkpoint would segv if passed an incorrect PID. Fixed the return code so it errors out properly.
Thanks to Eric Roman for bringing this to my attention.
This commit was SVN r18583.
that can *sometimes* cause problems with "make -j [N>1] install".
Ensure to make the target directory before we copy stuff into it --
read the thread starting here for more details:
http://www.open-mpi.org/community/lists/devel/2008/06/4080.php
This commit was SVN r18570.
Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher.
Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported.
More info to come on devel list.
This commit was SVN r18555.
1. it depends upon the ability of the native environment to alert us that the orted has died/failed to start. I have included that support for SLURM, but other environments need to be done.
2. for some yet-to-be-determined reason, the message that tells the remaining daemons to "die" isn't getting out of the RML, even though no obvious blockage is standing in the way. Work will continue on resolving that problem. For now, the orteds appear to be exiting on their own quite nicely when they see their HNP "lifeline" disappear.
This represents the best-available fix for ticket #221 so I am closing that ticket at this time.
This commit was SVN r18536.
The former will return a valid item in the list, the latter will return an invalid item that marks the end of the list.
It was happending that when oversubscribing by way of an appfile we would cause a segv because we tried to interpret the invalid item returned by "opal_list_get_end" instead of a valid item. We would then try to write to unallocated memory.
This commit fixes trac:1279
This commit was SVN r18529.
The following Trac tickets were found above:
Ticket 1279 --> https://svn.open-mpi.org/trac/ompi/ticket/1279
By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too.
Fixes ticket #1314
In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally.
Fixes ticket #1315
This commit was SVN r18524.
It is still possible that someone can call an orte_output function during orte_finalize - this is not an error. Prior commits ensured that this is correctly handled. This commit only deals with improper calls prior to calling orte_init.
This commit was SVN r18513.
made in r18345 for ompi_version_string. This was done per request from Jeff
Squyres to maintain consistency and to remove some warnings caused by the
non-use of some static const char.
This commit was SVN r18461.
The following SVN revision numbers were found above:
r18345 --> open-mpi/ompi@8dd0421015
system, we don't try to use it (e.g., if orte_output or orte_show_help
is called before orte_init).
This commit was SVN r18442.
The following Trac tickets were found above:
Ticket 1289 --> https://svn.open-mpi.org/trac/ompi/ticket/1289
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
* Remove the opal_only option. This was suffering from bit rot, and no one uses it. It can be added back fairly easily if wanted.
* Cleanup metadata interactions at the local level.
* Touch up some of the INC funcitonality (fix typos and a minor ordering issue)
This commit was SVN r18416.
