no need to #include <math.h> ...
cmr=v1.8.2:reviewer=miked:ticket=4759
This commit was SVN r32121.
The following Trac tickets were found above:
Ticket 4759 --> https://svn.open-mpi.org/trac/ompi/ticket/4759
The distances as returned by hwloc_get_whole_distance_matrix_by_type are typ float.
This patch handle all distances as float.
cmr=v1.8.2:reviewer=miked
This commit was SVN r32120.
cmr=v1.8.2:reviewer=tkordenbrock:subject=Portals4/MTL hanging fix
This commit was SVN r32113.
The following Trac tickets were found above:
Ticket 4681 --> https://svn.open-mpi.org/trac/ompi/ticket/4681
cmr=v1.8.2:reviewer=tkordenbrock:subject=Move r32112 to v1.8.2 branch
This commit was SVN r32112.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r32112
The following Trac tickets were found above:
Ticket 4682 --> https://svn.open-mpi.org/trac/ompi/ticket/4682
RHEL 7 has shipped with kernel support for the RDMA_TRANSPORT_USNIC
enum, but ''not'' the RDMA_TRANSPORT_USNIC_UDP enum. This means that
when you install usNIC drivers from cisco.com, the kernel will report
IBV_TRANSPORT_USNIC, even though the transport is actually using UDP.
Therefore, we have to modify the logic in common/verbs to do the
additional magic probe if the device reports either an
IBV_TRANSPORT_IWARP or IBV_TRANSPORT_USNIC (because both of those might
be lies -- do the probe to figure out the real transport).
The code changed by this patch is fairly trivial; it simply moves the
logic of the magic probe to its own short function, and then calls that
short function in both the IBV_TRANSPORT_(IWARP|USNIC) cases. It looks
longer because several lengthy comments were also updated.
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32098.
the other collective modules. If we endup without some of the
collective the code will raise an error anyway.
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r32096.
Based on extensive discussions before/at the June 2014 developer's
meeting, put a lengthy comment explaining a second reason why we
''must'' use an RTE barrier during MPI_FINALIZE and
MPI_COMM_DISCONNECT (i.e., unreliable transports). Slightly explain
more the original reason why we do this, too (BTLs can lie/buffer a
message without actually injecting it on the network).
This commit was SVN r32095.
rtnetlink doesn't check the source address when determining whether to
return route info for a query. So we need to check that the OIF matches
the OIF of the source interface name. Without this check, OMPI might
pair a local interface which does not have a route to a particular
remote interface.
Fixes Cisco bug CSCup55797.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32090.
At the developer meeting today, the question was raised as to whether
the SCTP BTL was maintained any more. I emailed Alan Wagner to see if
he had any interest/resources to continue to maintain the SCTP BTL.
He indicated that he unfortunately had any resources to maintain it;
it would be fine to remove the SCTP BTL from the trunk.
So long, SCTP BTL... fare thee well...
This commit was SVN r32075.
This file has to be pre-emptively compiled to generate the module, but
then it also has to be included in libmpi_usempif08.
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32071.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
Some parameters were ommited and compilation failed if
configured with --disable-weak-symbols
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32064.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
1: find/create procs, and create associated endpoint for each
2: resolve peer addresses
The 2nd part is done as a separate loop so that the address lookups
can be parallelized.
The overall result is to split usnic_add_procs() into two smaller,
simpler parts.
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32062.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
When ibv_create_ah() fails due to an address resolution failure, it
really only means that we can't reach that one peer -- so we should
just ignore that one peer. If ibv_create_ah() fails for some other
reason, then give up on the entire usnic_X device.
Change the show_help() message that is displayed when ibv_create_ah()
fails due to address resolution failure; indicate that it's likely a
routing problem. Also opal_output_verbose() the same info, since
show_help() is de-duplicated (and this particular show_help() message
can be squelched).
Fixes Cisco bugs CSCup35851 and CSCup35872.
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32061.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
Use the appropriate modules, don't use mpif-config.h.
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32052.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
There is more comprehensive work regarding MPI_SIZEOF coming, but the
Fortran working group in the MPI Forum is debating this internally,
and I'm still doing more testing to get a final solution. So for the
moment, just remove real*16 and complex*32 support so that it compiles
porperly with older compilers (that do not support real*16 and
complex*32).
This commit was SVN r32048.
Move them all to fortran/use-mpi-f08, since that's the only directory
that uses them (the use-mpi-f08-desc directory has been disabled).
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32045.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
Thanks to Michael Rachner for pointing out the issue.
cmr=v1.8.2:ticket=trac:4736
This commit was SVN r32042.
The following Trac tickets were found above:
Ticket 4736 --> https://svn.open-mpi.org/trac/ompi/ticket/4736
This is part one of several Fortran improvements and fixes. This
first part removes the now-defunct scripts that are used to generate
the .f90 files in the use-mpi-tkr implementation, and just commits the
output from those scripts. This makes long-term maintenance of the
use-mpi-tkr implementation simpler.
cmr=v1.8.2:reviewer=jsquyres:subject=Various Fortran fixes/improvements
This commit was SVN r32040.
Move away from verbs-specific terms "device" and "port" in the usnic
BTL help messages. Replace them with "usNIC interface" (since usNIC
has no concept of a port).
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32029.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
Move MACLEN and IPV4LEN into _util.h and rename them to be MACSTRLEN
and IPV4STRLEN, respectively.
cmr=v1.8.2:ticket=trac:4734
This commit was SVN r32028.
The following Trac tickets were found above:
Ticket 4734 --> https://svn.open-mpi.org/trac/ompi/ticket/4734
The post and start window calls are supposed to be matching. The code
did not check to see that an incoming post matched with the start call.
This commit fixes the bug by placing the post on a pending list that
will be checked by the next call to start.
cmr=v1.8.2:reviewer=dgoodell
This commit was SVN r32017.
The replace callback did not increment the incoming frag counter. This
leads to a hang during synchronization. This commit adds the increment
and also puts the request on the garbage collection list to fix a leak.
This fixes a hang found when running the mpich test suite.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32016.
The wrong type was used when calculating the amount of space needed
for an accumulate fragment. Fixed the calculation and took the
opportunity to eliminate the get_acc header as it is identical to the
acc header.
This fixes trac:4719 and #4718
Tracking these fixes for 1.8.2 in this CMR.
Throwing this to Brad for review as he is the one who ran into the issue.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32015.
The following Trac tickets were found above:
Ticket 4719 --> https://svn.open-mpi.org/trac/ompi/ticket/4719
This changeset :
- always call the low/level implementation for :
* MPI_Alltoallv
* MPI_Neighbor_alltoallv
* MPI_Alltoallw
* MPI_Neighbor_alltoallv
- fix mca_coll_tuned_alltoallv_intra_basic_inplace
so zero size types are correctly handled
cmr=v1.8.2:reviewer=bosilca:ticket=4715
This commit was SVN r32013.
The following Trac tickets were found above:
Ticket 4715 --> https://svn.open-mpi.org/trac/ompi/ticket/4715
in self optimization
This addresses an issue found with the MPICH pscw_ordering test. Eager sends
were not yet active (which is ok for the standard path) but not ok for the
self optimization. Fixed by waiting for all post messages before checking
the sync state.
Fixes trac:4724
Tracking the 1.8.2 issue in this CMR.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32012.
The following Trac tickets were found above:
Ticket 4724 --> https://svn.open-mpi.org/trac/ompi/ticket/4724
It is valid to lock/unlock MPI_PROC_NULL. It probably isn't work tracking
whether MPI_PROC_NULL is locked for MPI_PROC_NULL RMA operations so this
is probably the permanent solution.
Closes trac:4720
Tracking the 1.8.2 issue with this CMR.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32011.
The following Trac tickets were found above:
Ticket 4720 --> https://svn.open-mpi.org/trac/ompi/ticket/4720
Brad correctly pointed out that the total window size should not be an
int. Changed it to an unsigned long.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32010.
Only one field is valid for RMA requests: MPI_ERROR. This field is set
to the correct value in ompi_request_empty so there is no reason to
allocate and keep track of osc/sm requests because they are always
complete on return. Since we are no longer using the osc/sm request
structure or free list they are now removed.
Closes trac:4723
Tracking this issue with the CMR. Brad, can you verify the issue is indeed fixed.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32009.
The following Trac tickets were found above:
Ticket 4723 --> https://svn.open-mpi.org/trac/ompi/ticket/4723
Correctly handle the corner case in MPI_Alltoallv when
some tasks have no data to transfer and some other tasks
do have data to transfer.
This test case is covered in ibm/collective/alltoallv_somezeros
from the ompi-tests repo.
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31985.
is really special as the weights can be one of the following three
values (NULL, EMPTY or some legal value). As such, we need a complex
if to correctly convert the Fortran value to the corresponding C
value. Thus, always defining the c_ array is the simplest and most
straighforward approach.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31955.
Issue noted by Walter Spector on the user's mailing list.
Throwing to Craig Rasmussen for review.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31933.
This would be a really, really weird case if it ever happens (i.e.,
you have usnics but the agent process failed somewhere in MPI_INIT
such that the agent never appears), but having an infinite loop
doesn't seem like a good idea.
(does not need to go to v1.8 because v1.8 still uses RML for
communication for the connectivity checker)
This commit was SVN r31932.
This conservative fixes tries to fetch info from both
opal_dstore_nonpeer and opal_dstore_peer.
This is required is task A spawns tasks B and C.
B was previously unable to find info from C, this caused locality
info not being set and a hang in coll/ml init.
no CMR is required since v1.8 uses a unique dstore
This commit was SVN r31923.
if eager rdma is used, endpoint reference_count is greater than one.
this commit is a temporary fix that OBJ_RELEASE the endpoint as much as needed.
thought this is likely correct, it can be suboptimal and hence needs to be reviewed
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r31922.
http://www.open-mpi.org/community/lists/devel/2014/05/14822.php
Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root).
This commit was SVN r31916.
We were still leaking 1) file descriptors for data files, and 2) some
control files. I fixed both of these leaks and everything is looking
good. This should fix the bug where we are running out of file
descriptors when running the loop_spawn test. I also too the
opportunity to refactor the code a bit to make the mapping/unmapping
simpler. This should help avoid these sorts of issues in the future.
Depends on #4678
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31893.
if in_ptr is NULL, the MAP_FIXED flag cannot be passed to mmap
this caused a hang in topology/cart and topology/sub from ibm
test suite on trunk.
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r31890.
Thanks George for pointing out.
cmr=v1.8.2:reviewer=bosilca:ticket=4676
This commit was SVN r31889.
The following Trac tickets were found above:
Ticket 4676 --> https://svn.open-mpi.org/trac/ompi/ticket/4676
This fixes a bug introduced in :
- r31815 (trunk)
- r31853 (v1.8 branch)
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31888.
The following SVN revision numbers were found above:
r31815 --> open-mpi/ompi@8bafe06c57
r31853 --> open-mpi/ompi@bff944d766
Per Ralph :
"I noticed that we are incrementing and decrementing the opal_progress_event state.
However, this no longer has any impact whatsoever on the RML as that is running in
the independent ORTE event thread. So all this actually does is impact the MPI layer
by adding an unnecessary overhead."
Thanks Ralph for pointing this :-)
cmr=v1.8.2:reviewer=rhc:ticket=4671
This commit was SVN r31887.
The following Trac tickets were found above:
Ticket 4671 --> https://svn.open-mpi.org/trac/ompi/ticket/4671
since r31716 mca_topo_base_comm_cart_2_2_0_t is an object
and must be allocated/freed with OBJ_NEW/OBJ_RELEASE.
this fixes topology/cart_sub_zero from the ibm test suite.
v1.8 does not use objects, so no cmr for this branch
This commit was SVN r31883.
The following SVN revision numbers were found above:
r31716 --> open-mpi/ompi@e3df77548d
operation. Ralph will fix shortly.
For the time being, put back the original code...
Refs trac:4669
This commit was SVN r31872.
The following Trac tickets were found above:
Ticket 4669 --> https://svn.open-mpi.org/trac/ompi/ticket/4669
Now that the infrastructure is calling BTL del_procs() before the BTL
finalize(), the usnic BTL had to re-order some of its teardown
sequence to avoid assert() failing.
This is part of a larger conversation involving #4669. Since
MPI_FINALIZE and MPI_COMM_DISCONNECT currently use an
oob/grpcomm-based barrier, the usnic BTL can ''absolutely know'' that
these endpoints and procs will no longer be used. If the ORTE DPM
goes back to a PML-based barrier, the usnic BTL will need to grow more
complex teardown semantics (a la TCP socket FIN/ACK/FIN_WAIT states).
Refs trac:4669
This commit was SVN r31871.
The following Trac tickets were found above:
Ticket 4669 --> https://svn.open-mpi.org/trac/ompi/ticket/4669
to be based on grpcomm (i.e., an out-of-band based barrier) rather
than the simplistic PML-based barrier that it currently uses.
This is pending a larger discussion with Nathan and George, but it
will allow the usnic BTL to stop assert()-failing in light of the
recent del_procs() change.
This commit was SVN r31870.
Based on a suggestion from George on #31806, use the pre-computed
sizes rather than duplicating the computation math (which may change
someday in the future).
cmr=v1.8.2:ticket=trac:4647
This commit was SVN r31841.
The following Trac tickets were found above:
Ticket 4647 --> https://svn.open-mpi.org/trac/ompi/ticket/4647
a memory leak. Similar changes shuld be applied to all the
other PML that are copies of OB1. This patch is related to
#4653.
This commit was SVN r31838.
Avoid sending/receiving zero size messages in order to be compliant
with the top-level modification
cmr=v1.8.2:ticket=4651:reviewer=bosilca
This commit was SVN r31836.
The following Trac tickets were found above:
Ticket 4651 --> https://svn.open-mpi.org/trac/ompi/ticket/4651
of existing BTL fo an endpoint, all the others are just partial list.
Thus, all the cleaning should first be done in the btl_send array,
and them in the other arrays (btl_eager and btl_rdma).
This commit was SVN r31834.
- fix bugs
- silent warnings
cmr=v1.8.2:ticket=4651:reviewer=bosilca
This commit was SVN r31831.
The following Trac tickets were found above:
Ticket 4651 --> https://svn.open-mpi.org/trac/ompi/ticket/4651
This commit fixes two issues:
- This intent of the code @ bml_r2.c:486 is to prevent calling the
btl_del_procs more than once for a given proc. Gilles correctly
identified there was a problem in this code but r31786 we not the
correct fix.
- Fix a segmentation fault in r2 finalize revealed by the fact we
actually call del_procs now.
cmr=v1.8.2:reviewer=ggouaillardet:ticket=trac:4645
This commit was SVN r31829.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
r31786 --> open-mpi/ompi@fc96b0a7b8
The following Trac tickets were found above:
Ticket 4645 --> https://svn.open-mpi.org/trac/ompi/ticket/4645
MPI_Isend.
I filed an RFC for this optimization some time back. It is a
relatively simple optimization. If the data associated with an
MPI_Isend can be put on the wire without allocating an MPI_Request
then do so. In this case we can legally return omp_request_empty
which will correctly indicate that the request is complete and that is
was not cancelled (these are the only requirements on send requests).
cmr=v1.8.3:reviewer=bosilca
This commit was SVN r31828.
Basesmuma was vallocing space for control data then mmapping over that
data. Nothing in the code suggests any need for mmapping a specific
address so I did the following to remove the leak:
- Removed the valloc of the buffer space
- ftruncate the mmaped file to ensure there is sufficient memory to
allocate space for the control data.
Ideally this code should be using opal/shmem but that is a larger
change. Keeping it simple for now.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31822.
Make sure to cleanup the registation cache when removing an
endpoint. This leak only affects systems with XPMEM installed.
Since this is in code specific to XPMEM not sure who could review so
sending it directly to the RM.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31821.
This commit :
- Correctly retrieve the communicator size when
checking memory and parameters
- Ensure (sendtype,sendcount) and (recvtype,recvcount)
matches and return with MPI_ERR_TRUNCATE otherwise
- Return with MPI_SUCCESS without invoking the low level
if no data is going to be transferred
- Fixes trac:4506
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31815.
The following Trac tickets were found above:
Ticket 4506 --> https://svn.open-mpi.org/trac/ompi/ticket/4506
r30343 introduced the optimization of putting the OB1 sendreq and
recvreq on the stack for blocking sends and receives. However, the
requests did not contain enough storage for the data that is normally
immediately ''after'' the request (e.g., BTL data).
This commit changes these requests to be pointers and to use alloca()
to get enough total space for the OB1 request and all the associated
data.
The change is smaller than it looks; most of it is just changing from
"foo.bar" to "foo->bar" notation (etc.).
Submitted by Jeff, reviewed by Nathan. But we want George to look at
this (and get a little soak time on the trunk) before moving to v1.8.
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31806.
The following SVN revision numbers were found above:
r30343 --> open-mpi/ompi@2b57f4227e
This commit fixes leaks of bml endpoints in finalize. A summary of the
bugs/fixes is below.
1) ompi_mpi_finalize used ompi_proc_all to get the list of procs but
never released the reference to them (ompi_proc_all called
OBJ_RETAIN on all the procs returned). When calling del_procs at
finalize it should suffice to call ompi_proc_world which does not
increment the reference count.
2) del_procs is called BEFORE ompi_comm_finalize. This leaves the
references to the procs from calling the pml_add_comm
function. The fix is to reorder the calls to do omp_comm_finalize,
del_procs, pml_finalize instead of del_procs, pml_finalize,
ompi_comm_finalize.
3) The check in del_procs in r2 checked for a reference count of
1. This is incorrect. At this point there should be 2 references:
1 from ompi_proc, and another from the add_procs. The fix is to
change this check to look for a reference count of 22. This check
makes me extremely uncomforable as nothing will call del_procs if
the reference count of a procs is not 2 when del_procs is
called. Maybe there should be an assert since this is a developer
error IMHO.
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31782.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
netpatterns_setup_narray_knomial_tree.
Fix a bug in ptpcoll that caused memory allocated by
netpatterns_setup_narray_knomial_tree to leak.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31781.
vagrind correctly indicated that the mpool is needed when tearing down
the free lists. Reordered the teardown code to correct this.
My code so no review required.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31780.
Two leaks are fixed in this commit:
- Do not leak btl component list items.
- Do not leak the nodename when decoding the pidmap.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31779.
This commit fixes three leaks:
- bml/r2: fix leak of del_procs in mca_bml_r2_del_procs
- Release the modex data in btl/scif, btl/ugni, and btl/vader
- ompi_mpi_finalize: close the allocator framework
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31778.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
a brand new dummy connection has to be used to properly
trigger the main thread termination and avoid timeout in
the main thread
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r31772.
The local buffer object is only used by the root of the group,
so move down the buffer declaration and initialization.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31771.
An OBJ_DESTRUCT was missing for mca_pml_ob1.send_ranges causing a
memory leak. Identified by valgrind.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31768.
This commit fixes two leaks:
- We never destructed the attributes on MPI_COMM_WORLD. All other
communicators that have attributes are released through
ompi_comm_free which does the attribute destruction. For
MPI_COMM_WORLD this is now done before the destructor is called.
- Add missing OBJ_RELEASE for ompi_comm_f_to_c_table.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31766.
scif_close is not causing scif_poll in the listening thread to return
as expected. To ensure the thread exits attempt to make a local
connection to wake up the thread before calling pthread_join.
cmr=v1.8.2:reviewer=ggouaillardet
This commit was SVN r31756.
closed
We were leaving the selected component open. This commit should
eliminate a leak detected by valgrind.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31749.
The smsg_mboxes free list was not getting destructed. The construct
has been moved to module initialization and a matching destruct is now
in the module destruct.
This commit was SVN r31746.
This commit fixes memory leaks discovered in the sbgp setup code. We
were leaking an opal_argv as well as some list items. I took the
opportunity to clean up the code a little which includes making use of
the opal_argv_free function.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31745.
The items in the available bcol list were getting leaked. This commit
fixes this leak. I also cleaned up the code a bit. This includes
making use of the opal_argv_free function.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31744.
It is essential to call mca_base_framework_close for every framework
that is opened. coll/ml was not doing this so neither bcol nor sbgp
were getting cleaned up. This commit fixes this omission.
Also fixed a leak caused by calling OBJ_DESTRUCT for something created
with OBJ_NEW. With these changes coll/ml appears to be valgrind clean.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31743.
Simple bug. The dist_graph pointer must be a constructed object. The
change from malloc to OBJ_NEW was missing from r31716. Tested with MTT
and everything looks ok now.
This commit was SVN r31739.
The following SVN revision numbers were found above:
r31716 --> open-mpi/ompi@e3df77548d
There is no reason to cancel the listening thread. It should die
automatically when the file descriptor is closed. It is sufficient
to just wait for the thread to exit with pthread join.
cmr=v1.8.2:ticket=trac:4616:reviewer=jsquyres
This commit was SVN r31738.
The following Trac tickets were found above:
Ticket 4616 --> https://svn.open-mpi.org/trac/ompi/ticket/4616
We were leaking file descriptors when coll/ml was in use. It turn out
this was because basesmuma was failing to unmap files it had previously
mapped. This commit cleans up the setup code to ensure that we only
attempt to map the control files once per module and then ensures the
files are unmapped when the module is released.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31737.
algorithm
Per suggestion from Manju make sure there isn't a gap in the size ranges
for the available algorithms.
cmr=v1.8.2:ticket=trac:4437:reviewer=ompi-rm1.8
This commit was SVN r31728.
The following Trac tickets were found above:
Ticket 4437 --> https://svn.open-mpi.org/trac/ompi/ticket/4437
MPI_Cart_Create/MPI_Graph_create/MPI_Dist_Graph
Fixes trac:4581
This commit was SVN r31716.
The following Trac tickets were found above:
Ticket 4581 --> https://svn.open-mpi.org/trac/ompi/ticket/4581
In preparation for moving the BTLs down to OPAL, discontinue the use
of the RML for connectivity client/agent communication. Instead, use
local unix domain sockets in the job session directory (all
communication is between processes on the same server, so unix domain
sockets are fine).
This commit was SVN r31710.
Add the component use_udp value into the modex. If my component's
use_udp value doesn't agree with the use_udp value from a peer's modex
data, print a helpful message and disqualify the usnic BTL (the usnic
BTL will not be used). This prevents accidental customer
misconfigurations.
Reviewed by Dave Goodell
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31689.
Trivial struct re-ordering to eliminate holes in the middle of the
struct (although there's still a hole at the end) and reduce the
overall size of the struct from 64 to 56 bytes. Also change mtu from
int to uint16_t; there was no need for it to be that large.
Reviewed by Dave Goodell
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31688.
Fix mismatch between the MCA param (which expresses the timeout in
*mili*seconds) and the struct timeval timeout (which expresses the
timeout in *micro*seconds).
Reviewed by Dave Goodell
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31687.
So track that the rte has reached that point, and only emit the new message if it is accurate.
Note that we still generate a TON of output for a minor error:
Ralphs-iMac:examples rhc$ mpirun -n 3 -mca btl sm ./hello_c
--------------------------------------------------------------------------
At least one pair of MPI processes are unable to reach each other for
MPI communications. This means that no Open MPI device has indicated
that it can be used to communicate between these processes. This is
an error; Open MPI requires that all MPI processes be able to reach
each other. This error can sometimes be the result of forgetting to
specify the "self" BTL.
Process 1 ([[50239,1],2]) is on host: Ralphs-iMac
Process 2 ([[50239,1],2]) is on host: Ralphs-iMac
BTLs attempted: sm
Your MPI job is now going to abort; sorry.
--------------------------------------------------------------------------
*** An error occurred in MPI_Init
*** on a NULL communicator
*** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
*** and potentially your MPI job)
*** An error occurred in MPI_Init
*** on a NULL communicator
*** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
*** and potentially your MPI job)
*** An error occurred in MPI_Init
*** on a NULL communicator
*** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
*** and potentially your MPI job)
--------------------------------------------------------------------------
MPI_INIT has failed because at least one MPI process is unreachable
from another. This *usually* means that an underlying communication
plugin -- such as a BTL or an MTL -- has either not loaded or not
allowed itself to be used. Your MPI job will now abort.
You may wish to try to narrow down the problem;
* Check the output of ompi_info to see which BTL/MTL plugins are
available.
* Run your application with MPI_THREAD_SINGLE.
* Set the MCA parameter btl_base_verbose to 100 (or mtl_base_verbose,
if using MTL-based communications) to see exactly which
communication plugins were considered and/or discarded.
--------------------------------------------------------------------------
-------------------------------------------------------
Primary job terminated normally, but 1 process returned
a non-zero exit code.. Per user-direction, the job has been aborted.
-------------------------------------------------------
--------------------------------------------------------------------------
mpirun detected that one or more processes exited with non-zero status, thus causing
the job to be terminated. The first process to do so was:
Process name: [[50239,1],2]
Exit code: 1
--------------------------------------------------------------------------
[Ralphs-iMac.local:23227] 2 more processes have sent help message help-mca-bml-r2.txt / unreachable proc
[Ralphs-iMac.local:23227] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
[Ralphs-iMac.local:23227] 2 more processes have sent help message help-mpi-runtime / mpi_init:startup:pml-add-procs-fail
Ralphs-iMac:examples rhc$
Hopefully, we can agree on a way to reduce this verbage!
This commit was SVN r31686.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
top_ompi_srcdir -> OMPI_TOP_SRCDIR
top_ompi_builddir -> OMPI_TOP_BUILDDIR
We also split the srcdir/builddir flags according to their local tree (e.g., OPAL_TOP_SRCDIR), and tied them all together in configure.ac. Renamed ompi_ignore and ompi_unignore to be opal_<foo> as these are agnostic markers.
Only thing left is ompilibdir being treated similar to what we dif for srcdir/builddir. Coming soon.
This commit was SVN r31678.
